Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 32041 - 32070 of 1815197

Full-Text Articles in Entire DC Network

Image Encryption Based On S-Box And 3d-Chaotic Maps And Secure Image Transmission Through Ofdm In Rayleigh Fading Channel, Jenan Namuq, Fadhil Hasan, Alaa Ali Mar 2026

Image Encryption Based On S-Box And 3d-Chaotic Maps And Secure Image Transmission Through Ofdm In Rayleigh Fading Channel, Jenan Namuq, Fadhil Hasan, Alaa Ali

Engineering and Technology Journal

Data security is vital if transferred over a wireless network or stored on a personal computer. The essential properties of chaos, such as initial state sensitivity and unpredictability, make it a crucial candidate for encryption applications. This paper proposes a 3D chaotic map and a cascaded S-Box that can be combined to get a high-efficiency and complex cryptographic algorithm. The first stage is ciphering using a 3D cat map, the second stage is an S-box based on a 3D Henon map, and the third stage is another ciphering stage using a 3D Henon map. This study combines various encryption techniques, …

Go to article

The Electrical And Mechanical Aspects Of Aluminum And Copper Resistance Spot Weld Joints, Marwah Fakhri, Ibtihal Mahmood, Ahmed Al-Mukhtar Mar 2026

The Electrical And Mechanical Aspects Of Aluminum And Copper Resistance Spot Weld Joints, Marwah Fakhri, Ibtihal Mahmood, Ahmed Al-Mukhtar

Engineering and Technology Journal

Resistance spot welding (RSW) is widely used in the automotive industry, particularly for copper-aluminum alloys in electric cars. RSW joint conductivity is crucial for electric vehicles. Welded parts may fracture due to tension, altering conductivity. The study examines resistance spot post-weld joint metallurgy and deformation-induced conductivity changes. The electric resistance of similar and dissimilar RSW joints was examined during tensile tests. Metallurgical tests for RSW joints revealed an increase in grain size from the base metal (BM) to the heat-affected zone (HAZ) and finally the fusion zone (FZ). Satisfactory shear tension strength results were obtained for dissimilar joints (Al-Cu) at …

Go to article

Improving The Charging Rate And Energy Recovery Of Triplex Tube Heat Storage-Based Pcm With Mono/Hybrid Nanoparticles, Ibrahim Sadiq, Sattar Aljabair, Abdulhassan Karamallah Mar 2026

Improving The Charging Rate And Energy Recovery Of Triplex Tube Heat Storage-Based Pcm With Mono/Hybrid Nanoparticles, Ibrahim Sadiq, Sattar Aljabair, Abdulhassan Karamallah

Engineering and Technology Journal

Latent thermal energy storage systems are widely utilized to match the inequality between heat supply and demand. Despite these systems' wide range of uses in various applications, their high potential is limited by the slow charging rate. The target of this study is to augment the thermal performance of paraffin-based on triplex tube heat storage by dispersion of two different types of conductive mono nanoparticles (Al2O3, CuO) and hybrid Nano additives of various volume fractions (0.4, 0.8, 1.6, 3.2%) into paraffin wax. The experimental work involves measurements and preparation of the considered Nano-PCM. The enthalpy porosity model and finite volume …

Go to article

Numerical Study Of The Effect Of Thermal Insulation And Window-To-Wall Ratio On Reducing The Thermal Loads Of The Residential Sector In Iraq, Abd Hussein, Ahmed Saleh, Hamdi Ahmed Mar 2026

Numerical Study Of The Effect Of Thermal Insulation And Window-To-Wall Ratio On Reducing The Thermal Loads Of The Residential Sector In Iraq, Abd Hussein, Ahmed Saleh, Hamdi Ahmed

Engineering and Technology Journal

The climate change that the world is witnessing has cast a greater shadow on the Middle East. Iraq, one of the region's countries, is experiencing harsh thermal conditions. With the increase in population growth in the country, there was a significant development in the housing sector, which exacerbated the thermal loads that the residential sector requires to overcome harsh weather conditions. This leads to increased energy consumption. To reduce this consumption and energy waste, a simulation study was conducted using the TRNSYS program to analyze the thermal behavior of a building whose walls consist of Gypsum, Juss, brick, and mortar, …

Go to article

Analyzing Energy Performance And Assessing Dry Moisture Content Of Briquettes Through Numerical Investigations, Oluwaseyi Alabi, Timothy Adeyi, Sakiru Ekun Mar 2026

Analyzing Energy Performance And Assessing Dry Moisture Content Of Briquettes Through Numerical Investigations, Oluwaseyi Alabi, Timothy Adeyi, Sakiru Ekun

Engineering and Technology Journal

This study presents a comprehensive numerical investigation into the energy evaluation and determination of dry moisture content of briquettes, a vital aspect of renewable energy production. Utilizing advanced computational fluid dynamics (CFD) modeling and simulations, we explored key parameters impacting briquette combustion, such as moisture content, size, density, and temperature profiles. The research demonstrates that these factors significantly influence combustion behavior, with the CFD model accurately predicting mass loss curves and burnout times. The process was completed in 10 minutes, reaching a temperature of 300K and yielding gases consisting of CO2, CO, and H2O, while the devolatilization front was assumed …

Go to article

State-Of-The-Art Review Into Signal Processing And Artificial Intelligence-Based Approaches Applied In Gearbox Defect Diagnosis, Asaad Dubaish, Alaa Jaber Mar 2026

State-Of-The-Art Review Into Signal Processing And Artificial Intelligence-Based Approaches Applied In Gearbox Defect Diagnosis, Asaad Dubaish, Alaa Jaber

Engineering and Technology Journal

Various industrial applications, including rotating and reciprocating machinery, depend on gears. Therefore, a sudden breakdown of the gears could result in substantial financial losses. Due to this, extensive studies have focused on defect diagnosis. Both machinery maintenance decisions and preventive maintenance techniques have been aided by vibration analysis. An increased vibration is a warning sign that a machine is about to malfunction or break down. Observing and evaluating the machine's vibration pulses can identify the nature and extent of the issue and, as a result, predict when the machine will fail. The vibration signal may identify gearbox defects early on …

Go to article

Application Of Discrete Wavelet Transform For Condition Monitoring And Fault Detection In Wind Turbine Blades: An Experimental Study, Ahmed Ogaili, Mohsin Hamzah, Alaa Jaber, Ehsan Ghane Mar 2026

Application Of Discrete Wavelet Transform For Condition Monitoring And Fault Detection In Wind Turbine Blades: An Experimental Study, Ahmed Ogaili, Mohsin Hamzah, Alaa Jaber, Ehsan Ghane

Engineering and Technology Journal

Effective structural monitoring maximizes efficiency in wind turbines, a crucial renewable energy asset. Using advanced condition monitoring techniques is crucial for reliability. This experiment shows how to use DWT and FFT for wind turbine blade fault detection. DWT allowed for multiresolution analysis of vibration signals from a healthy and eroded lab-scale turbine blade under controlled wind speeds. A 5-level DWT decomposition identified frequency sub-bands with localized fault information. The FFT post-processing of level 5 approximation coefficients revealed precise modal frequency shifts between blade states. The healthy blade showed a dominant 16 Hz mode that matched operational dynamics. Erosion caused a …

Go to article

Experimental Study Of The Double Pipe Heat Exchanger For Heat Transfer And Pressure Drop Characteristics Of The Grooved Tube, Natiq Fadhil, Amer Aldabbagh, Falah Hatem Mar 2026

Experimental Study Of The Double Pipe Heat Exchanger For Heat Transfer And Pressure Drop Characteristics Of The Grooved Tube, Natiq Fadhil, Amer Aldabbagh, Falah Hatem

Engineering and Technology Journal

Experiments are conducted to investigate the heat transfer and pressure drop characteristics of corrugated tubes and rod baffles in a shell-and-tube heat exchanger. One of the effective techniques to improve heat transfer is to use corrugated tubes. This article investigates rod baffles with varied corrugation depths and corrugated tubes for (1 start). In the heat exchanger's shell side, where a constant wall temperature was attained on the tube side, water was employed as the working fluid after being heated at the wall. Corrugation ratios (e/dh) of 0.1 and 0.13, pitch (p) of 10, 20, and 30mm, and two types (x/d) …

Go to article

Enhancing The Solar Still Performance Using Different Designs Of Absorber With Heat Storage Materials And Different Wick Materials: A Review, Lujain Hyal, Jalal Jalil, Abduljabbar Hanfash Mar 2026

Enhancing The Solar Still Performance Using Different Designs Of Absorber With Heat Storage Materials And Different Wick Materials: A Review, Lujain Hyal, Jalal Jalil, Abduljabbar Hanfash

Engineering and Technology Journal

Despite water covering more than two-thirds of the planet, improving potable water production technologies is a significant issue because of the increased demand for treated water. Solar desalination presents a simple, costless energy and friendly technology which utilizes solar energy and gives great incentive to decrease pollution effects produced by burning fossil fuels. In order to address the global drinking water shortage, particularly in rural and distant locations, this technique can be employed to give pure water to people using a solar still, which in many respects, is one of the most significant feasible uses of solar energy and perfect …

Go to article

Phase Change Material In Glazing Windows System: A Review, Mina Nsaif, Mounir Baccar, Jalal Jalil Mar 2026

Phase Change Material In Glazing Windows System: A Review, Mina Nsaif, Mounir Baccar, Jalal Jalil

Engineering and Technology Journal

As far as thermal insulation is concerned, phase change materials (PCM) have a very good potential to be excellent insulation materials due to their thermal properties like low thermal conductivity and high latent heat. The researchers started to incorporate the walls and windows with PCM to reduce the internal surface temperature and indoor temperature of the room. This paper focuses on double and triple-glazed windows’ thermal performance, different filling insulation materials, ventilation windows, and thermochromic glazing. In addition, a detailed discussion on the effect of changing the thickness and the thermal characteristics of the PCM and its influence on the …

Go to article

Studying The Influence Of Variable Inlet Guide Vane With The Physical Faults On The Performance Of Industrial Gas Turbine At Part-Load Operation, Waleligne Salilew, Zainal Abdul Karim, Tamiru Lemma Mar 2026

Studying The Influence Of Variable Inlet Guide Vane With The Physical Faults On The Performance Of Industrial Gas Turbine At Part-Load Operation, Waleligne Salilew, Zainal Abdul Karim, Tamiru Lemma

Engineering and Technology Journal

This research work presents a gas turbine performance investigation. Researchers have put efforts into this field of study; however, the influence of the concurrence of variable inlet guide vane (VIGV) drift, fouling, and erosion on the three-shaft gas turbine’s performance during part-load operation has remained unexplored. Therefore, this study addresses this gap. First the gas turbine design point and off-design performance model have been developed by utilizing the original engine manufacturer data provided. The accuracy of the models was validated, and the maximum mean absolute percentage error of the design point performance model is shown at exhaust temperature prediction, it …

Go to article

Analyzing The Impact Of Fdm Parameters On Compression Strength And Dimensional Accuracy In 3d Printed Pla Parts, Hind Abdulridha, Tahseen Abbas Mar 2026

Analyzing The Impact Of Fdm Parameters On Compression Strength And Dimensional Accuracy In 3d Printed Pla Parts, Hind Abdulridha, Tahseen Abbas

Engineering and Technology Journal

Fused deposition modeling (FDM) is an additive manufacturing (AM) technique frequently used to create prototypes and parts with intricate geometrical designs. It is gaining popularity since it enhances products by removing the need for expensive equipment. The materials used, the printing process, and the parameters influence the mechanical properties of printed objects. The quality and functionality of the parts are impacted by FDM process parameters. This study focused on the impact of six parameters on the mechanical and physical properties of samples printed using the FDM machine (Creality Ender-5 Pro). The infill density percentage, infill pattern, layer thickness, shell thickness, …

Go to article

Comparison Between The Effect Of Adding Msgnp And B4c-Wc Nanoparticles On The Metallurgical And Mechanical Characterization Of Al-7075 Composites Produced By Stir Casting, Haneen Lateef, Saad Ali Mar 2026

Comparison Between The Effect Of Adding Msgnp And B4c-Wc Nanoparticles On The Metallurgical And Mechanical Characterization Of Al-7075 Composites Produced By Stir Casting, Haneen Lateef, Saad Ali

Engineering and Technology Journal

Metal Matrix Composite (MCC) reveals considerably better properties, such as low density, high tensile strength, hardness, and good resistance to wear compared with every alloy or other metal. The current study concentrated upon the assessment of the properties of aluminum matrix composites (AMCs) synthesis with the Al-7075 as a matrix and the MSGNPs that sieved to (35 nm) at different weight fractions percentages as reinforcements using stir-casting method and compared with Al7075/B4C-WC nanocomposites. These experiments aim to select the appropriate type and percentage of reinforcement particles for producing Al-7075 composites with the best mechanical properties. The mechanical properties, as well …

Go to article

Improvement Of Performance Evaluation Using Hybrid Composite Electrode (Cu/Cr/Wc/Ag) In Electric Discharge Machining, Ahmed Abdulwahhab, Abbas Ibrahim Mar 2026

Improvement Of Performance Evaluation Using Hybrid Composite Electrode (Cu/Cr/Wc/Ag) In Electric Discharge Machining, Ahmed Abdulwahhab, Abbas Ibrahim

Engineering and Technology Journal

Electrical Discharge Machining (EDM) is a non-traditional technique widely used in various industries to remove material using electrical discharges. Finding a suitable electrode material that can resist high temperatures and efficiently remove material from the workpiece is a major difficulty in electrical discharge machining (EDM). Due to their exceptional electrical and thermal properties, composite electrodes of various metals have become extremely popular. In this study, a composite electrode (Cu-1%Cr-0.5%WC-1%Ag) manufactured using the stir casting technique will be utilized to evaluate the electrical discharge machining (EDM) process. The study compares the performance between conventional pure copper electrodes and composite electrode utilization …

Go to article

The Effect Of Calcium Carbonate-Nanoparticle On The Mechanical And Thermal Properties Of Polymers Utilizing Different Types Of Mixing And Surface Pre-Treatment: A Review Paper, Nashwan Mahmood, Mohammed Hikmat Mar 2026

The Effect Of Calcium Carbonate-Nanoparticle On The Mechanical And Thermal Properties Of Polymers Utilizing Different Types Of Mixing And Surface Pre-Treatment: A Review Paper, Nashwan Mahmood, Mohammed Hikmat

Engineering and Technology Journal

The effect of calcium carbonate nanoparticles (CaCO3) on the mechanical and thermal properties of various polymers was investigated in this review. The results were compared to scholarly research published between 2002-2022. Different polymers were evaluated, including Polypropylene (PP), High-density polyethylene (HDPE), Polyvinyl chloride (PVC), Low-density polyethylene (LDPE), Polyethylene (PE), and natural rubber (NR). Through this work, the effect of CaCO3 nanoparticles that act as fillers in polymeric materials has been reviewed. It can be concluded that mechanical and thermal properties can be decreased, increased, or unchanged by increasing and decreasing the fillers to obtain optimal results. It is reasonable to …

Go to article

Study Of Physical Properties Of Biocomposite Based On The Polymer Blends Used For Denture Base Applications, Wassan Hussain, Jawad Oleiwi, Qahtan Hamad Mar 2026

Study Of Physical Properties Of Biocomposite Based On The Polymer Blends Used For Denture Base Applications, Wassan Hussain, Jawad Oleiwi, Qahtan Hamad

Engineering and Technology Journal

In this study, two different types of polymers—Polyamide (PA) type (6) and Polyvinylpyrrolidone (PVP) type (K30), each added separately with a different weight fraction (0%, 2%, 4%, 6%) to Polymethylmethacrylate (PMMA) heat-cured resin as blend matrix—have been blended with heat-cured PMMA resin to develop the PMMA resin properties used for prosthesis complete denture. Sisal and coconut powder, two natural powders, were added separately to the polymer blend matrices with varying weight fractions (2%, 4%, 6%) to create composite specimens. Testing for density, water absorption, thermal conductivity, FTIR, and DSC were included in this study. The results show that adding reinforcing …

Go to article

The Influence Of The Inclusion Of Nano Ceramic Particles On The Pmma Composite Properties For Biomaterials Applications, Aya Shahir, Aseel Al.Zubaidi, Wafaa Salih Mar 2026

The Influence Of The Inclusion Of Nano Ceramic Particles On The Pmma Composite Properties For Biomaterials Applications, Aya Shahir, Aseel Al.Zubaidi, Wafaa Salih

Engineering and Technology Journal

This study examines the effects of reinforcing PMMA acrylic resin with different Nanoparticle types: Silica (SiO2) (67.8nm), Titania (TiO2) (57.3nm), and Talc powders (TP) (80.1nm). This was done by using the ultrasonic mixing method for dispersing the nano-powder in the matrix and using them at three different proportions (0. 5, 1, and 1.5%) to improve the properties of PMMA composite materials for medical applications. The characteristic functional groups associated with Nano-ceramic particles and PMMA in the composite specimens were confirmed by FT-IR spectroscopy. Also, this research investigates some mechanical properties, including (tensile strength, compression strength, elastic modulus, hardness, and surface …

Go to article

Dynamic Characterization Assessment And Optimization Of Reactive Powder Underwater Concrete, Doha Alsaffar, Basil Al-Shathr, Suhair Abed Mar 2026

Dynamic Characterization Assessment And Optimization Of Reactive Powder Underwater Concrete, Doha Alsaffar, Basil Al-Shathr, Suhair Abed

Engineering and Technology Journal

This study investigates the dynamic properties of Reactive Powder Underwater Concrete (RPUWC), a novel composite integrating attributes of Reactive Powder Concrete and underwater cast concrete. The study focuses on assessing the impact resistance, dynamic modulus of elasticity, rigidity, and Poisson's ratio. The influence of micro steel fibers (MS) at different volume fractions (1%, 1.25%, and 1.5%) and different anti-washout admixture (AWA) dosages (0.5 %, 0.7%, and 0.9%) are examined. The findings indicate that increasing the MS content improves crack resistance and energy absorption, resulting in a substantial 155.6% enhancement in the first crack resistance when using 1.5% MS. Additionally, ultimate …

Go to article

A Static And Dynamic Analysis Of A High-Speed Turbo Machine Foundation, Ameer Ahmed, Mohammed Fattah, Makki Mohsen Mar 2026

A Static And Dynamic Analysis Of A High-Speed Turbo Machine Foundation, Ameer Ahmed, Mohammed Fattah, Makki Mohsen

Engineering and Technology Journal

The foundation plays a significant role in safe and efficient turbo machinery operation. Turbomachinery generates harmonic load on the foundation due to its high-speed rotating motion, which causes vibration in the machinery foundation. Any increase in machine vibration reduces the machine's performance. In studying engineering problems, using numerical programs helps get a well-designed foundation. Before conducting a parametric study, the program used shall be validated and/or verified by conducting a series of analyses to ensure that the program output represents the reference studied cases well. In many cases, the real problem is simplified by assuming that the machine's loads are …

Go to article

Waste Rubber Pre-Treatments And Their Effects On Compressive And Flexural Strength Of Modified Sifcon, Ali Hashim, Basil Al-Shathr Mar 2026

Waste Rubber Pre-Treatments And Their Effects On Compressive And Flexural Strength Of Modified Sifcon, Ali Hashim, Basil Al-Shathr

Engineering and Technology Journal

Slurry-infiltrated fiber concrete (SIFCON) is a comparatively new and unique steel fiber-reinforced concrete (FRC) form. SIFCON possesses many desirable characteristics, including high strength and ductility. Sustainable concrete is one of the most critical types of concrete for the current environment. An enormous volume of waste rubber tires is produced globally due to the expansion of the automobile industry. This study's primary purpose is to assess the impact of employing pre-treated waste rubber tires in slurry-infiltrated fiber concrete on its flexural and compressive strengths. Based on flexural and compressive strengths, an experimental program was conducted to evaluate the flexural and compressive …

Go to article

Studying Characteristics And Strength Of The Unsaturated Gypseous Soil With Various Saturation Degrees, Ahmed Abood, Mohammed Fattah, Aqeel Al-Adili Mar 2026

Studying Characteristics And Strength Of The Unsaturated Gypseous Soil With Various Saturation Degrees, Ahmed Abood, Mohammed Fattah, Aqeel Al-Adili

Engineering and Technology Journal

The main objective of this study is to determine the appropriateness of unsaturated gypseous soil as a subgrade layer for carrying foundations. A comprehensive laboratory testing program was implemented to investigate the geotechnical characteristics and behavior of unsaturated gypseous soil. Tests that are physical included specific gravity, classification tests, relative density, Proctor compactions, single and double oedometer collapse potential, and static triaxial compression (CU-test). Chemical testing, Scanning Electron Microscopy (SEM), and Electronic Dissipation x-ray Scanning (EDS) analyses were also carried out. The tests were performed for samples prepared at 70% relative density of the natural gypseous soil. Tests are performed …

Go to article

Free Vibration Of Thin Beams On Winkler Foundations Using Generalized Integral Transform Method, Charles Ike Mar 2026

Free Vibration Of Thin Beams On Winkler Foundations Using Generalized Integral Transform Method, Charles Ike

Engineering and Technology Journal

The determination of free vibration frequencies of thin beams on Winkler foundations is important in their design to avoid resonant failures when the excitation frequency equals the least natural frequency. This article presents the determination of natural transverse vibration frequencies of Euler-Bernoulli beams on Winkler foundations using the Generalized Integral Transform Method (GITM). The problem is governed by a fourth-order partial differential equation (PDE) and boundary conditions dependent on the end restraints. The governing PDE is transformed into an algebraic eigenvalue problem for harmonic vibrations and harmonic response. Analytical solutions of the governing equations are difficult and complex. Hence, other …

Go to article

Uncracked Palm Kernel Shell Effect On Compressive Strength Of Concrete, Chidiebere Ezenkwa, Thaddeus Elogu Mar 2026

Uncracked Palm Kernel Shell Effect On Compressive Strength Of Concrete, Chidiebere Ezenkwa, Thaddeus Elogu

Engineering and Technology Journal

In recent times, the production of concrete has become a significant concern due to the rapid population growth and the depletion of raw materials. In this research, we investigated the use of Uncracked Palm Kernel Shell (UPKS) as a replacement for crushed granite in concrete production, with replacement percentages of 0%, 10%, 20%, 30%, and 100%. The concrete mix combined Ordinary Portland Cement with river sand and coarse aggregates (granite and UPKS). The properties of fresh concrete were assessed using the slump test, while the compressive strength test was conducted after curing the samples for 7, 14, 21, and 28 …

Go to article

Elzaki Transform Method For Natural Frequency Analysis Of Euler-Bernoulli Beams, Charles Ike, Tarig Elzaki Mar 2026

Elzaki Transform Method For Natural Frequency Analysis Of Euler-Bernoulli Beams, Charles Ike, Tarig Elzaki

Engineering and Technology Journal

Free vibration analysis of thin beams under dynamic excitation is important in design to prevent resonance failures that occur when the excitation frequency coincides with the natural vibration frequency. In this paper, the Elzaki transform method (ETM) is used, for the first time, to solve the free vibration problem of thin beams. The beam is assumed to be homogeneous and prismatic, and the vibration is assumed to be harmonic. As a result, the field equation becomes a fourth-order homogeneous ordinary differential equation (ODE). The Elzaki transform method is chosen in this study due to its proven ability to solve ODEs, …

Go to article

Cold-Bonded Lightweight Synthetic Aggregate Involving High Reactive Attapulgite At Different Curing Conditions, Mohammed Abbas, Waleed Abbas Mar 2026

Cold-Bonded Lightweight Synthetic Aggregate Involving High Reactive Attapulgite At Different Curing Conditions, Mohammed Abbas, Waleed Abbas

Engineering and Technology Journal

This study aimed to develop an eco-friendly, lightweight, and synthetic aggregate (SLA) based on clay suitable for use in structural lightweight concrete. The researchers utilized the cold-bonded pelletization process to agglomerate pozzolanic materials, specifically attapulgite extracted from a quarry, and crushed into a fine filler. The appropriate calcination temperature for manufacturing this clay as a pozzolanic material is 750°C. A total of 22 mixes were created using a combination of high reactive attapulgite (HRA) and cement (PC), with the attapulgite replacement rate varying from 100-50% by a 10% decrement. Different types of curing methods, including oven-dry, oven-water, room-water, and room-room, …

Go to article

Effect Of Bridge Piers Locations And Flow Intensity On Morphological Change In A 180-Degree River Bend, Abdurazaq Abdulwahd, Jaafar Maatooq Mar 2026

Effect Of Bridge Piers Locations And Flow Intensity On Morphological Change In A 180-Degree River Bend, Abdurazaq Abdulwahd, Jaafar Maatooq

Engineering and Technology Journal

Bridges when it crossing rivers often required multiple piers for support. One of has a limited investigation is the impact of piers on scouring and morphological aspects when a bridge crossing sharp-bend of river. Consequently, it is crucial to investigate the hydraulic behavior of water flow in these areas due to the presence of these piers. In present study, an experimental program was conducted on a laboratory flume featuring a two-pier bridge within a 180-degree (sharp) bend to accomplish this. The piers were strategically positioned at 90 and 150 degrees within the bend. The results indicated that the bridge within …

Go to article

New S-Box Design For Image Encryption Based On Multi-Chaotic System, Azhaar Abdallah, Alaa Farhan Mar 2026

New S-Box Design For Image Encryption Based On Multi-Chaotic System, Azhaar Abdallah, Alaa Farhan

Engineering and Technology Journal

Image encryption is a crucial area for researchers in information security, which protects digital images from unauthorized access. This paper proposes a novel image encryption scheme based on the multi-chaotic system. This paper is about encrypting color images based on a 2D Henon map and a 3D Lorenz map. We used the 2D Henon map equation to generate a new S-Box, thus creating a solid cipher that is difficult to break (for the confusion operation). We then generate keys from the 3D Lorenz map for the shifting process (for diffusion operation). A comparative analysis and the simulation test show that …

Go to article

Physical And Electrical Properties Of Spray Coating Graphene Films: The Effect Of Solution Concentration, Ayat Yahya, Evan Salim, Azhar Hassan, Subash C. B. Gopinath Mar 2026

Physical And Electrical Properties Of Spray Coating Graphene Films: The Effect Of Solution Concentration, Ayat Yahya, Evan Salim, Azhar Hassan, Subash C. B. Gopinath

Engineering and Technology Journal

Graphene nanofilms were deposited by the spray coating method at different concentrations (0.05, 0.1, 0.2, 0.3, 0.4, and 0.5 g) and prepared at 120°C. The prepared nanofilms were characterized in terms of their structural, morphological, optical, and electrical properties. The results confirm the formation of high-purity and high-crystallinity graphene nanofilms with a layered nanosheet morphology. The X-ray diffraction pattern shows the presence of pure graphene with (002) crystal planes. SEM Images show that the intended graphene films are symmetrical with few wrinkles on their surface. The graphene films show semi-transparent behavior with a maximum transmission of 50%. Raman spectroscopy shows …

Go to article

Heat Transfer Coefficients In Air-Solid Fluidized Bed Using Vertical Heating Element, Fadhil Faraj, Jamal Ali, Sarmad Najim Mar 2026

Heat Transfer Coefficients In Air-Solid Fluidized Bed Using Vertical Heating Element, Fadhil Faraj, Jamal Ali, Sarmad Najim

Engineering and Technology Journal

In various chemical industrial applications such as hydrocracking, drying, and Fischer-Tropsch, the utilization of fluidized bed systems is prevalent. Efficient heat transfer is crucial for maintaining stable temperatures and ensuring product quality in industrial processes. Gas-solid fluidized beds, which involve gas circulation through a bed of solid particles, offer a means to achieve efficient heat exchange. However, factors such as particle size, gas velocity, and heating methods can influence the effectiveness of these systems. To investigate the impact of internal heating on heat transfer in gas-solid fluidized beds, an experimental study was conducted using glass beads of 200 and 600 …

Go to article

Production Of High-Efficiency Alternative Biodiesel From Transesterification Of Waste Cooking Oil Using An In-House Made Y-Type Zeolite Catalyst, Huda Abdul-Kader, Zaidoon Shakor, Bashir Al-Zaidi, Shurooq Al-Humairi, Musa Salihu Mar 2026

Production Of High-Efficiency Alternative Biodiesel From Transesterification Of Waste Cooking Oil Using An In-House Made Y-Type Zeolite Catalyst, Huda Abdul-Kader, Zaidoon Shakor, Bashir Al-Zaidi, Shurooq Al-Humairi, Musa Salihu

Engineering and Technology Journal

Y-zeolite catalyst, with a Si/Al ratio of 2.23 and a high surface area of 703.34 m2/gcat, was prepared with three different particle sizes: 75, 600, and 1000 μm, from commercial Ludox AS-40 colloidal silica 40 wt.% suspension in water using the hydrothermal method. Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray (EDX), Atomic Force Microscopy (AFM), X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and Brunauer-Emmett-Teller (BET) analyses were all utilized to analyze the properties of the synthesized Y-zeolite catalyst. Waste cooking oil (WCO) was transesterified to biodiesel in a batch reactor under different temperatures (e.g., 40, 50, and …

Go to article

First Prev Next Last