Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Discipline
Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 65641 - 65670 of 1114360

Full-Text Articles in Entire DC Network

Enhancing Fiber Optic Interferometric Sensing With Microwave Photonics-Based Dispersion Fourier Transform And Integrated Magnitude–Phase Analysis, Chen Zhu, Ruimin Jie, Chenxi Huang, Jie Huang Jan 2025

Enhancing Fiber Optic Interferometric Sensing With Microwave Photonics-Based Dispersion Fourier Transform And Integrated Magnitude–Phase Analysis, Chen Zhu, Ruimin Jie, Chenxi Huang, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

Fiber optic inline interferometers are widely used for high-precision sensing due to their sensitivity, compactness, and immunity to electromagnetic interference. Traditional optical spectral analysis methods suffer from limited dynamic range due to free spectral range (FSR) constraints, while microwave photonic filtering (MPF) techniques based on dispersion Fourier transform (DFT) provide an alternative by mapping optical signals into the radio frequency (RF) domain. However, conventional passband frequency tracking in MPF systems has limited sensitivity, and the recently demonstrated phase-based methods, though highly sensitive, are constrained by phase wrapping beyond 2π. In this work, we propose and experimentally demonstrate an integrated magnitude–phase …

Go to article

A Cost-Effective Nilm Solution With Three-Point Labelling And Non-Causal Convolution Technique, Yanan Zhang, Gan Zhou, Yanjun Feng, Zhan Liu, Li Huang, Zhi Li, Rui Bo Jan 2025

A Cost-Effective Nilm Solution With Three-Point Labelling And Non-Causal Convolution Technique, Yanan Zhang, Gan Zhou, Yanjun Feng, Zhan Liu, Li Huang, Zhi Li, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Although deep learning is increasingly promising in the field of Non-Intrusive Load Monitoring (NILM) these days, the high costs of data recording and labelling represent a significant challenge for the training of supervised models. To address this, a cost-effective sequence-to-points NILM solution is proposed, integrating three-point labelling with non-causal convolution techniques. The approach introduces a semi-automatic labelling framework for obtaining NILM three-point data, which provides a low-cost data collection and labelling solution for large-scale applications. Then, a novel loss function combining coordinate loss and confidence loss is developed to address the positional misalignment and negative sample confusion in sequence-to-points scenario …

Go to article

Distributed Sapphire Fiber Bragg Grating-Based Thermal Profiling Of Submerged Entry Nozzles, Farhan Mumtaz, Hanok W. Tekle, Bohong Zhang, Xiaodong Li, Sunday Abraham, Bryant Mathis, Jeffrey D. Smith, Ronald J. O'Malley, Jie Huang Jan 2025

Distributed Sapphire Fiber Bragg Grating-Based Thermal Profiling Of Submerged Entry Nozzles, Farhan Mumtaz, Hanok W. Tekle, Bohong Zhang, Xiaodong Li, Sunday Abraham, Bryant Mathis, Jeffrey D. Smith, Ronald J. O'Malley, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This article focuses on the application of sapphire fiber Bragg gratings (FBGs) for instrumentation in submerged entry nozzles (SENs) within the steelmaking industry. The SEN is pivotal for transferring molten steel from a tundish to a mold, while preventing the infiltration of oxygen and nitrogen from the surrounding environment. Maintaining optimal flow conditions in the mold is crucial for ensuring casting process stability and maintaining high-quality steel. Sapphire FBG sensors have been instrumented in SENs to enable distributed thermal mapping for monitoring the health of the SEN. The optical sensor comprises three cascaded sapphire FBGs inscribed using femtosecond (FS) laser …

Go to article

Filter Based Motor Control For Robotic Applications, Shuzan Kumar Sarkar, Noah Wilding, Shruti Pandey, Nicholas Hawkins, Michael L. Mcintyre Jan 2025

Filter Based Motor Control For Robotic Applications, Shuzan Kumar Sarkar, Noah Wilding, Shruti Pandey, Nicholas Hawkins, Michael L. Mcintyre

Electrical and Computer Engineering Faculty Research & Creative Works

Controlling coreless DC motor in the field of humanoid robotic application involves considering various surrounding electromagnetic environment interference and sudden change of load with parameters variation of motor dynamics which makes the system complex. This paper presents a filter-based control scheme for a coreless DC motor drive system using an H-bridge inverter as the input circuit of the motor which is easy to implement and cost effective. From the electromagnetic characteristics, the dynamic model of the motor along with the control scheme is implemented in the commercial software PLECS. Then the effectiveness of this approach is validated through simulations demonstrating …

Go to article

Ibis Model Simulation Accuracy Improvement With Slew Rate Correction, Yifan Ding, Chulsoon Hwang Jan 2025

Ibis Model Simulation Accuracy Improvement With Slew Rate Correction, Yifan Ding, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

The accuracy of Power-Supply-Induced Jitter (PSIJ) simulation in Input/Output Buffer Information Specification (IBIS) models is critical for ensuring robust high-speed signal integrity analysis, but it lacks accuracy in predicting the PSIJ when the pre-driver exists in the model. Previous studies have proposed methods to improve IBIS PSIJ simulation accuracy with pre-driver effect included in the IBIS switching coefficients modification process. However, these methods fail to accurately model the output waveform slew rate change with varied power noise. In this work, an improved modification method was proposed to incorporate power-aware characteristics into the modified IBIS model, thereby improving the accuracy of …

Go to article

A High Step-Up Soft-Switched Converter Based On Coupled Inductor And Current-Fed Voltage Multiplier, Koosha Choobdari Omran, Reza Beiranvand, Pourya Shamsi Jan 2025

A High Step-Up Soft-Switched Converter Based On Coupled Inductor And Current-Fed Voltage Multiplier, Koosha Choobdari Omran, Reza Beiranvand, Pourya Shamsi

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a novel non-isolated DC-DC converter that combines coupled inductor (CI) and voltage multiplier (VM) techniques is proposed. The leakage energy of the CI is effectively recycled, and soft-switching conditions are achieved for all switches and diodes. Resonance between the leakage inductor of the CI and VM capacitors provides soft-switching conditions, without requiring a separate resonant tank. The use of VM stages not only lowers the voltage stress on semiconductor components but also allows for the use of low-voltage-rated devices, leading to reduced conduction losses, lower cost, and improved efficiency. High voltage gain can be achieved by appropriately …

Go to article

Balanced Benchmarking Of Zero-Shot And Rag Approaches For Biomedical Term Normalization, Thanh Son Do, Daniel B. Hier, Tayo Obafemi-Ajayi Jan 2025

Balanced Benchmarking Of Zero-Shot And Rag Approaches For Biomedical Term Normalization, Thanh Son Do, Daniel B. Hier, Tayo Obafemi-Ajayi

Electrical and Computer Engineering Faculty Research & Creative Works

Normalization of medical concepts to an ontology is a key aspect of the natural language processing of biomedical text. It enables the mapping of medical expressions to standardized ontology terms and their identifiers, thereby enhancing the interoperability and computability of medical concepts. Although large language models (LLMs) can identify and standardize medical terms, they may struggle to accurately map ontology terms to their corresponding ontology identifiers. These challenges arise from the stochastic nature of LLMs, their limited exposure to uncommon ontology identifiers during training, and their lack of an integrated lookup mechanism. We generated test sets of synthetic terms to …

Go to article

Design And Optimization Of A Miniaturized Spiral Antenna For Ultra-Wideband Applications, Mckennan Starkey, Cody Goins, Victor Khilkevich, Daryl Beetner Jan 2025

Design And Optimization Of A Miniaturized Spiral Antenna For Ultra-Wideband Applications, Mckennan Starkey, Cody Goins, Victor Khilkevich, Daryl Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

Ultra-wideband communication in the frequency range from 3.1 to 10.6 GHz is popular for short range wireless networks. Designing a wideband antenna that covers the entire 7.5 GHz band is challenging, particularly if the antenna should be small, unobtrusive, and should effectively communicate with another antenna as their positions and orientations change. A miniaturized wideband circularly polarized Archimedean spiral antenna is developed in this study which is wideband and circularly polarized. Miniaturization and optimization techniques are introduced to enable an antenna size of $30 \text{mm} \times 30 \text{mm}$ and a thickness less than 0.5 mm.

Go to article

A Non-Destructive And Simple Setup Method For Dielectric Liquid Characterization In A Wide Frequency Range With Djordjevic-Sarkar Model, Reza Vahdani, Reza Asadi, Seyedmehdi Mousavi, Xiaoning Ye, Donghyun Kim Jan 2025

A Non-Destructive And Simple Setup Method For Dielectric Liquid Characterization In A Wide Frequency Range With Djordjevic-Sarkar Model, Reza Vahdani, Reza Asadi, Seyedmehdi Mousavi, Xiaoning Ye, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

This paper introduces a non-destructive and simple setup method for characterizing dielectric liquids over a broad frequency range (up to 30 GHz) using the Djordjevic-Sarkar model. By employing a differential microstrip line and comparing scattering parameters in air-filled and liquid-immersed scenarios, the proposed method achieves precise dielectric constant (DK) and dissipation factor (Df) extraction. 2 Liquid samples (PAO4 and DC-15) were tested using this method. Validation against the cavity resonance method demonstrates a strong agreement for the extracted DK values, with a relative error of less than 1.5 %, indicating high accuracy. However, the method is less sensitive to Df, …

Go to article

Impact Of Voltage Regulator Modules On Power Distribution Network Impedance, Hanyu Zhang, Zhiping Yang, Alvis Hsu, Ryan Hou, Chulsoon Hwang Jan 2025

Impact Of Voltage Regulator Modules On Power Distribution Network Impedance, Hanyu Zhang, Zhiping Yang, Alvis Hsu, Ryan Hou, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

The voltage regulator module (VRM) impacts the power distribution network (PDN) impedance in the low frequency range. The effect of VRM is essential for reliable PDN analysis and simulation. However, the existing VRM models for power integrity (PI) simulation lack an in-depth understanding of the effect of the feedback control in the VRM. In this paper, the impact of the VRM control loop on the PDN impedance is investigated. The relationship between the VRM output impedance and the PDN impedance at the IC input pin is derived. The output impedance of a VRM is analyzed using small signal analysis. Eventually, …

Go to article

Extended S-Parameter Model Of The Power Distribution Network For Rapid Coupling Predictions, Cody Goins, Aaron Harmon, Mckennan Starkey, Kristen Donnell, Victor Khilkevich, Daryl Beetner Jan 2025

Extended S-Parameter Model Of The Power Distribution Network For Rapid Coupling Predictions, Cody Goins, Aaron Harmon, Mckennan Starkey, Kristen Donnell, Victor Khilkevich, Daryl Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

Power and return planes are part of the power delivery network of almost all modern high frequency printed circuit boards. These power and return planes can form the basis of unintended radiated emissions from, or radiated coupling to, these boards. Predicting coupling to complex systems is a difficult problem and typically reserved for full wave simulations. Recent works have introduced segmentation approaches that are able to predict coupling to complex printed circuit board designs by using pre-rendered segments and cascading these segments through a circuit solver approach. The extended S-parameter models used by the segmentation approach currently do not include …

Go to article

Usb 3.0 Ibis-Ami Model Construction Using Measurement And Neural Network, Jiahuan Huang, Wenchang Huang, Muqi Ouyang, Hank Lin, Bin Chyi Tseng, Chulsoon Hwang Jan 2025

Usb 3.0 Ibis-Ami Model Construction Using Measurement And Neural Network, Jiahuan Huang, Wenchang Huang, Muqi Ouyang, Hank Lin, Bin Chyi Tseng, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

The input/ output modes are essential for high-speed signal integrity analysis and channel simulation. This work aims to develop a method for generating an IBIS-AMI model for USB 3.0 using measurement data. Instead of requiring a specially designed motherboard with test points for specific measurements, this method uses measurement data obtained from an assembled motherboard. The only available data for measurement in this case is the output voltage waveform from the USB 3.0 port on the motherboard. To address this, a novel approach is proposed to extract all the required parameters for the IBIS-AMI model from a single available measurement …

Go to article

Graph-Based Reinforcement Learning Approach For Multi-Power-Domain Pcb Pdn Shape And Stackup Synthesis, Haran Manoharan, Hanfeng Wang, Jingnan Pan, Yuchu He, Jianmin Zhang, Xu Gao, Chulsoon Hwang Jan 2025

Graph-Based Reinforcement Learning Approach For Multi-Power-Domain Pcb Pdn Shape And Stackup Synthesis, Haran Manoharan, Hanfeng Wang, Jingnan Pan, Yuchu He, Jianmin Zhang, Xu Gao, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

Efficient power plane and stack up optimization is critical for Printed Circuit Board (PCB) Power Delivery Networks (PDNs), particularly in multi-power-domain designs with stringent DC Resistance (DCR) specifications. This work presents a novel reinforcement learning-based framework that assigns stack up layers for each power domain and iteratively refines power plane shapes to meet design constraints while ensuring non-overlapping layouts. The approach leverages Minimum Spanning Trees (MSTs) for initializing power plane shapes. It dynamically refines them using the A∗ (A-Star) algorithm with weighted pathfinding, ensuring optimal connectivity and compliance with DCR requirements. Tested extensively on multi-power-domain scenarios, the algorithm demonstrates robust …

Go to article

Optimized Modeling Of Pcb Vias With Nonfunctional Pads And High-Frequency Behavior Up To 150 Ghz, Mehdi Mousavi, Kevin Cai, Chaofeng Li, Sathvika Bandi, Manish Mathew, Mehdi Khaleghi, Shameem Ahmed, Donghyun Kim Jan 2025

Optimized Modeling Of Pcb Vias With Nonfunctional Pads And High-Frequency Behavior Up To 150 Ghz, Mehdi Mousavi, Kevin Cai, Chaofeng Li, Sathvika Bandi, Manish Mathew, Mehdi Khaleghi, Shameem Ahmed, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents an enhanced closed-form approach for modeling and optimizing high-frequency PCB vias, implemented in Python and validated against industry standard tools such as ADS and HFSS. The model incorporates resistance alongside inductance and capacitance to capture frequency-dependent losses and integrates non-functional pads (NFPs), demonstrating significant improvements in signal integrity by reducing reflections and enhancing return loss, particularly at 100 GHz. The methodology extends the frequency range of previous models from 100 GHz to 150 GHz, ensuring compatibility with next-generation standards like PCIe Gen 6. Validation results show insertion loss deviations under 3 dB and consistent return loss across …

Go to article

Obstacles And Mitigations For An Accurate Low Impedance, Low Frequency Measurement, Faye Squires, Yifan Ding, Matthew Doyle, Matteo Cocchini, Samuel Connor, Francesco De Paulis, Albert E. Ruehli, Chulsoon Hwang, Lijun Jiang Jan 2025

Obstacles And Mitigations For An Accurate Low Impedance, Low Frequency Measurement, Faye Squires, Yifan Ding, Matthew Doyle, Matteo Cocchini, Samuel Connor, Francesco De Paulis, Albert E. Ruehli, Chulsoon Hwang, Lijun Jiang

Electrical and Computer Engineering Faculty Research & Creative Works

The two-port shunt configuration is often heralded as the gold standard for low-impedance measurements. However, this measurement method is not without its own issues. The shunt configuration inherently creates a ground loop between the measurement device's reference plane and the reference of the device under test (DUT). Additionally, probes often must be oriented in such a way that allows inductive coupling to occur. This work uses microprobes to measure the shunt impedance of a non-ideal short to explore the limitations of this measurement method in terms of both frequency and impedance. It highlights the importance of ground loop isolation and …

Go to article

Design Strategies For Skew Compensation In Highspeed Pcb Strip Line Interconnects, Sathvika Bandi, Reza Asadi, Zhekun Peng, Srinivas Venkataraman, Granthana Rangaswamy, Santosh Pappu, Xu Wang, Donghyun Kim Jan 2025

Design Strategies For Skew Compensation In Highspeed Pcb Strip Line Interconnects, Sathvika Bandi, Reza Asadi, Zhekun Peng, Srinivas Venkataraman, Granthana Rangaswamy, Santosh Pappu, Xu Wang, Donghyun Kim

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents a comprehensive analysis of the impact of intra-pair PN skew compensation in printed circuit board (PCB) strip line (SL) traces, for a high-speed 224 Gbps lane for the first time. The study investigates the effects of skew compensation placement both with and without via discontinuities. Detailed evaluations are performed in both time and frequency domains, examining critical parameters such as time-domain reflectometry (TDR), input impedance, return loss, insertion loss, and common-mode S -parameters. The findings reveal that, in a simple strip line trace without via discontinuities, the location of skew compensation has negligible influence on signal margins. …

Go to article

Modeling Of Slot-Backed Microstrip Line For Emi Applications, Jongsuk Hyun, Wenchang Huang, Chulsoon Hwang Jan 2025

Modeling Of Slot-Backed Microstrip Line For Emi Applications, Jongsuk Hyun, Wenchang Huang, Chulsoon Hwang

Electrical and Computer Engineering Faculty Research & Creative Works

Radiated emissions from the noise-generating components in modern electronic devices are a significant concern for both electromagnetic interference and RF interference. Shielding cans are commonly used to suppress emissions from noise sources, but accurate shielding effectiveness evaluation requires a clean, well-defined radiation source that can reliably mimic real emissions for repeatable measurements. Slot-backed microstrip antennas provide a practical alternative to loop antennas, offering zero height, low parasitic radiation, and seamless printed circuit board integration. This article proposes an analytical model for estimating the magnetic dipole moment of slot-backed microstrip structures. The model captures both the discontinuity effects and radiated characteristics …

Go to article

Spatially Distributed Optical Fiber Sensing With Weak Fiber Bragg Grating Arrays Based On Microwave Photonics, Wassana Naku, Osamah Alsalman, Chen Zhu Jan 2025

Spatially Distributed Optical Fiber Sensing With Weak Fiber Bragg Grating Arrays Based On Microwave Photonics, Wassana Naku, Osamah Alsalman, Chen Zhu

Electrical and Computer Engineering Faculty Research & Creative Works

Fiber Bragg gratings (FBGs) have been one of the most widely used optical fiber sensors in both scientific and industrial applications due to their unique advantages of high sensitivity, ease of signal transduction, and capabilities for remote operation and multiplexing. However, the majority of sensing systems based on FBGs can only achieve quasi-distributed sensing along the fiber under test, leaving dark zones in between discrete FBG elements. In this work, we propose and demonstrate a microwave photonics enabled approach for the interrogation of cascaded FBGs to achieve spatially distributed sensing. The core of the system includes an incoherent optical frequency-domain …

Go to article

Characterization And Full-Wave Modeling Of Corona Discharge Induced Coupling To Touchscreen Displays, Zhekun Peng, Shubhankar Marathe, Javad Meiguni, Ali Foudazi, Jianchi Zhou, Li Shen, Viswa Pilla, Cheung Wei Lam, Donghyun Kim, David Pommerenke, Daryl G. Beetner Jan 2025

Characterization And Full-Wave Modeling Of Corona Discharge Induced Coupling To Touchscreen Displays, Zhekun Peng, Shubhankar Marathe, Javad Meiguni, Ali Foudazi, Jianchi Zhou, Li Shen, Viswa Pilla, Cheung Wei Lam, Donghyun Kim, David Pommerenke, Daryl G. Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

An electrostatic discharge (ESD) to the glass of a touchscreen display can damage capacitive touch sensor circuitry and traces. The ESD creates a sparkless corona discharge on the glass surface, which couples to sense patches on the other side of the glass. Currents induced on sense traces during the corona discharge are measured in an evaluation setup, which resembles the touchscreen design. Waveforms for current induced at different distances from the discharge position are recorded and compared. The induced currents are analyzed by their peak value and the total charge or energy delivered to the sense trace for different discharge …

Go to article

Topology And Parameter Joint Identification In Imbalanced Low-Voltage Distribution Networks Based On Load Characteristic Propagation, Yanan Zhang, Gan Zhou, Huan Mao, Wei Gu, Yanjun Feng, Rui Bo Jan 2025

Topology And Parameter Joint Identification In Imbalanced Low-Voltage Distribution Networks Based On Load Characteristic Propagation, Yanan Zhang, Gan Zhou, Huan Mao, Wei Gu, Yanjun Feng, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Low-voltage distribution networks often suffer from incomplete or outdated network records, making it challenging to obtain the topology and line parameters under actual operating conditions. To address this issue, a joint identification method is proposed based on the propagation of load transient characteristics. First, the principle of load characteristic propagation is elaborated, and the concept of coupling impedance is introduced. Second, a set of linear regression equations is established based on the changes in current and voltage of the terminal measurements before and after load switching, and then these equations are solved using the least squares method to form the …

Go to article

Centralized And Federated Heart Disease Classification Using Uci Dataset: A Benchmark With Interpretability Analysis, Mario Padilla Rodriguez, Eyiara Oladipo, Mohamed Nafea Jan 2025

Centralized And Federated Heart Disease Classification Using Uci Dataset: A Benchmark With Interpretability Analysis, Mario Padilla Rodriguez, Eyiara Oladipo, Mohamed Nafea

Electrical and Computer Engineering Faculty Research & Creative Works

Cardiovascular disease (CVD) is a leading cause of global mortality, highlighting the need for accurate diagnostic methods. This study benchmarks centralized and federated learning (FL) algorithms for heart disease binary classification using the UCI dataset, which includes 920 patient records from four hospitals in the USA, Hungary, and Switzerland. Our benchmark is supported by Shapley-value as well as Local Interpretable Model-agnostic Explanations (LIME) interpretability analyses to quantify feature importance for classification. In the centralized setup, various classification algorithms are trained on pooled data, with the Naive Bayes classifier achieving the highest test accuracy of 81.1%. Further, FL algorithms with four …

Go to article

Benchmarking Deep Learning Architectures For Ecg-Based Multi-Label Heart Disease Prediction Using Mimic-Iv Database, Eyiara Oladipo, Sarwar Nazrul, Mohamed Nafea Jan 2025

Benchmarking Deep Learning Architectures For Ecg-Based Multi-Label Heart Disease Prediction Using Mimic-Iv Database, Eyiara Oladipo, Sarwar Nazrul, Mohamed Nafea

Electrical and Computer Engineering Faculty Research & Creative Works

Cardiovascular disease (CVD) is a leading cause of global mortality, accounting for an estimated 17.9 million deaths annually. CVD is broadly defined as a group of medical conditions influenced by modifiable or non-modifiable risk factors that affect the heart's ability to function properly. Machine learning (ML) has emerged as a powerful tool for analyzing complex medical data, aiding in early detection and accurate diagnosis of CVD and improving patient outcomes. Recent studies proposed various deep learning (DL) architectures for detecting CVD, yet there is a lack of robust benchmarks for comparing their performance on large-scale databases. In this work, we …

Go to article

Honey-Reram Enabled Sustainable Edge Ai System For Iot Applications, Jinhui Wang, Feng Zhao, Mohammad Rafeeq Khan, Md Mehedi Hasan Tanim, Zoe Templin, Harshvardhan Uppaluru Jan 2025

Honey-Reram Enabled Sustainable Edge Ai System For Iot Applications, Jinhui Wang, Feng Zhao, Mohammad Rafeeq Khan, Md Mehedi Hasan Tanim, Zoe Templin, Harshvardhan Uppaluru

Electrical and Computer Engineering Faculty Research & Creative Works

This paper is toward a promising solution to address the environmental sustainability challenge in computing by building brain-inspired and green non-Von Neumann systems with Resistive Random-Access Memory (ReRAM) made from natural organic materials, honey, for energy-efficient operation, renewable material resources, sustainable device manufacturing, and environmentally-friendly disposal. In this paper, honey-ReRAM and its arrays are firstly manufactured and tested. The resistance modulation mechanism of honey-ReRAM is analyzed and investigated. Then a Computing-in-Memory (CIM) architecture based on honey-ReRAM for edge AI and IoT applications is proposed and evaluated. The experimental results indicate that the proposed edge AI systems with the VGG8 and …

Go to article

Ethics Vs.. Regulation: Converging Frameworks For Trustworthy Human-Centered Ai In Biomedical Research, Tayo Obafemi-Ajayi, Tiffani J. Bright, Emily F. Wong, Donald Wunsch, Joan Peckham, Jason H. Moore Jan 2025

Ethics Vs.. Regulation: Converging Frameworks For Trustworthy Human-Centered Ai In Biomedical Research, Tayo Obafemi-Ajayi, Tiffani J. Bright, Emily F. Wong, Donald Wunsch, Joan Peckham, Jason H. Moore

Electrical and Computer Engineering Faculty Research & Creative Works

The accelerating impact of AI in biomedical research is driving significant advances in precision medicine. As these systems increasingly shape health outcomes, the imperative to develop trustworthy, reliable, and ethically grounded AI becomes more pressing, particularly in addressing concerns related to data integrity, patient safety, and equitable outcomes. While the potential of AI to transform biomedical research is clear, its responsible integration depends on more than technological capability. Ensuring that these systems are aligned with societal values requires a dual commitment: the operationalization of ethical principles throughout the AI life cycle and the establishment of robust regulatory mechanisms. Ethics provides …

Go to article

Corona Discharge To Touchscreen Modeling Using Nonlinear Time-Dependent Corona Streamer Propagation Model In Spice, Zhekun Peng, Daniel Szanto, Jianchi Zhou, Darryl Kostka, David Pommerenke, Daryl G. Beetner Jan 2025

Corona Discharge To Touchscreen Modeling Using Nonlinear Time-Dependent Corona Streamer Propagation Model In Spice, Zhekun Peng, Daniel Szanto, Jianchi Zhou, Darryl Kostka, David Pommerenke, Daryl G. Beetner

Electrical and Computer Engineering Faculty Research & Creative Works

SPICE-based methods for predicting coupling from an ESD-induced corona streamer to printed-circuit board (PCB) structures beneath a touchscreen display are evaluated in this paper. Results demonstrate that the non-linear time-dependent propagation model can capture the coupling much better than other models and accurately predict the overall current waveform.

Go to article

In-Situ Thermographic Monitoring And Numerical Simulations Of Laser-Foil-Printing Additive Manufacturing, Tunay Turk, Tao Liu, Chia Hung Hung, Richard Billo, Jonghyun Park, Ming C. Leu Jan 2025

In-Situ Thermographic Monitoring And Numerical Simulations Of Laser-Foil-Printing Additive Manufacturing, Tunay Turk, Tao Liu, Chia Hung Hung, Richard Billo, Jonghyun Park, Ming C. Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser-foil-printing (LFP) is an additive manufacturing (AM) technique offering advantages over traditional powder-based methods. A deeper understanding of the melt pool dynamics is crucial for optimizing process parameters and achieving high-quality builds. This paper presents a combined approach utilizing numerical simulations and in-situ thermographic monitoring to investigate the relationship between scanning strategies, melt pool dimensions, and cooling rate in LFP. The numerical simulations are employed to predict melt pool behavior using a time-dependent thermal finite element analysis (FEA). Results demonstrate that the simulations accurately predict melt pool dimensions, showing strong agreement with experimental data. Simultaneously, real-time melt pool dynamics were …

Go to article

Implementation Of Miniature Tensile Specimens In Mechanical Properties Assessment Of Directed Energy Deposited Ti-6al-4v: As-Built And Heat Treated, Saeid Alipour, Sung Heng Wu, Frank Liou, Arezoo Emdadi Jan 2025

Implementation Of Miniature Tensile Specimens In Mechanical Properties Assessment Of Directed Energy Deposited Ti-6al-4v: As-Built And Heat Treated, Saeid Alipour, Sung Heng Wu, Frank Liou, Arezoo Emdadi

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Within the last two decades, additive manufacturing (AM), a. k.a. 3D printing, has provided promising solutions for producing near-net-shape components with intricate geometries. From the material perspective, titanium alloys, one of humankind's most essential structural materials, are being considered the first candidate for AMed parts due to their unique characteristics in strength-weight-corrosion combinations. However, measuring the mechanical properties of designed geometry remains a challenge due to the ineffectiveness of conventional standard tensile specimens in assessing the site-specific and intricate geometries. In AM, the current approach often consists of evaluating standard-sized samples with the assumption that components with complex geometries possess …

Go to article

A Ground Thermal Vacuum Facility For Simulating Cryogenic Space Environment Conditions, Emmanuel Kofi Asuako Wie-Addo, Lucas Scott, Daoru Han Jan 2025

A Ground Thermal Vacuum Facility For Simulating Cryogenic Space Environment Conditions, Emmanuel Kofi Asuako Wie-Addo, Lucas Scott, Daoru Han

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This work presents the ongoing progress of a vacuum facility upgrade at the Gas and Plasma Dynamics Laboratory (GPDL) at Missouri University of Science and Technology. A movable shroud has been fabricated and installed to enable the simulation of extreme cold conditions. The cooling rate of the shroud, a dummy test article, and a platform, using liquid nitrogen as the thermal fluid, is analyzed and reported under varying vacuum conditions for cryogenic runs. Preliminary testing revealed substantial thermal exchange between the shroud and the chamber walls, underscoring the necessity for implementing effective thermal isolation measures to mitigate heat transfer.

Go to article

Arc-Jet And Free-Flight Evaluation Of Laminar And Turbulent Diffusion Models On Ablation, Kyle Worden, Andrew Heider, Serhat Hosder Jan 2025

Arc-Jet And Free-Flight Evaluation Of Laminar And Turbulent Diffusion Models On Ablation, Kyle Worden, Andrew Heider, Serhat Hosder

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper investigates the effect of diffusion models on carbon ablation with a parametric study on a slug-calorimeter geometry in arc-jet flow at two enthalpy conditions using two arc-jet flow modeling approaches, and at corresponding enthalpy-matched free-flight conditions using RANS CFD simulations. Additionally, a sphere-cone geometry is modeled at the arc-jet enthalpy matched free-flight conditions and at a high Reynolds number free-flight condition. The approximate-corrected form of Fick's law and the Stefan-Maxwell diffusion models are investigated for equilibrium and finite-rate carbon ablation in laminar and turbulent flows, which is simulated with the Menter-SST turbulence model. The turbulent cases include the …

Go to article

Multifidelity Dust Erosion Analysis Of Mars Entry Vehicles, Adam Boland, Dominic Zanti, Serhat Hosder, Andrew Hinkle Jan 2025

Multifidelity Dust Erosion Analysis Of Mars Entry Vehicles, Adam Boland, Dominic Zanti, Serhat Hosder, Andrew Hinkle

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The objective of this paper is to present a multifidelity approach for estimating recession rate and kinetic energy impact rate on the surface of planetary entry vehicles operating in dusty atmospheric environments at hypersonic speeds. The multifidelity model used a co-Kriging approach that combined a low-fidelity correlation with a correction factor from high-fidelity CFD solutions. The developed multifidelity model enables efficient and accurate exploration of a design space to determine at what conditions encountering dust is most dangerous to TPS survivability. Two sample problems are used to demonstrate the effectiveness of the approach: the Mars 2020 lander and a HIAD-type …

Go to article

First Prev Next Last