Digital Commons Network^™

Concrete Patio Demolition And Construction, Tyler Nielsen

Construction Management

A 6.25 cubic yard unreinforced concrete patio was constructed for the non-profit organization. This project included three phases: concrete slab demolition, grading and formwork, and concrete pouring. Each phase was estimated and then received owner approval prior to execution. The demolition phase involved obtaining city permits for a roll-off container for debris removal. This phase also included two days of work with over 10 demolition crew members, who were given the required training and equipment to ensure safety and productivity. The following weeks included grading and setting up formwork. Once the grade was complete, the formwork was laid out and …

Evaluating The Barriers To Virtual And Augmented Reality Adoption In The Construction Industry, Hayden C. Werts

Construction Management

Virtual reality and augmented reality technologies have demonstrated the ability to enhance design coordination, safety training, and field accuracy in the construction industry; however, their utilization remains limited. This study examines and assesses the gap between the capabilities of VR/AR and their actual implementation in the construction industry, utilizing a literature review and an analytical survey of 52 construction professionals. Survey results revealed that only 27% of construction managers have utilized VR/AR in their careers, although those with experience in these technologies rated them highly for their ability to reduce errors and improve coordination. Key barriers to adoption included high …

Untold Stories – Precast Concrete Bench Construction And Installation, Lucas Llodra

Construction Management

This paper outlines the design-build process led by an interdisciplinary team of Construction Management students from California Polytechnic State University, San Luis Obispo, to construct four concrete benches. In collaboration with faculty, concrete specialists, and the non-profit organization R.A.C.E. Matters, the project launched in Winter 2025. R.A.C.E. Matters initiated the effort by requesting the design and installation of benches at scenic, high-visibility locations managed by the San Luis Obispo Land Conservancy: Pismo Preserve, the Octagon Barn, and Kathleen’s Overlook. The full project scope included design development, structural calculations, prefabrication, on-site construction, and final installation. Each bench will serve as a …

Farm Furniture - City Farm Slo, Aiden Blackburn, Antonio Nunez

Construction Management

Our senior project was to build 4 picnic tables, 6 picnic benches, 2 vegetable tables, and 1 hexagon shaped table for the City Farm SLO in San Luis Obispo, CA. We were grateful to help a local farm who focuses on education in the community and sustainable agricultural practices. We first estimated the project and created a preliminary schedule. This project lasted from mid-April to mid-June. The first step in the process was to estimate the cost and develop a preliminary schedule. The process for constructing the different build types was relatively similar: acquire materials, cut to size, assemble, sand, …

Renovations At The Ranch Slo, Brandon Garcia

Construction Management

This paper will follow the construction process for a project completed at The Ranch SLO in the spring of 2025 by two Cal Poly CM students. While the main reason for this paper is to follow construction processes, it will also address preconstruction and estimating associated with the project. The Ranch is a non-profit organization that provides a location where adults with disabilities can go and have recreational and employment training opportunities. The purpose of the project was to make renovations to an existing garden area and a chicken coop. The budget, planning, design, and construction means and methods were …

R.A.C.E. Matters Precast Concrete Bench Construction, Jack Alexander Ritchie

Construction Management

This senior project details the collaborative design, fabrication, and installation of three precast concrete benches for the nonprofit organization R.A.C.E. Matters in partnership with the San Luis Obispo Conservancy. The benches were designed to act as platforms for public art, amplifying diverse racial narratives through murals. A multidisciplinary team of students from Construction Management, Architecture, and Architectural Engineering worked together, with each discipline contributing to distinct phases of the project. Bench installations took place at the Pismo Preserve, the Octagon Barn, and Kathleen’s Overlook. This paper reflects on the hands-on construction process, the challenges of interdisciplinary coordination, and the real-world …

El Chorro Park Lumber Rack & Trailhead Kiosk Project, Nolan Christopher Gumm, Marvin Michael Garliepp

Construction Management

The EL Chorro Park Lumber Rack and Kiosk project was a collaboration with San Luis Obispo County Parks and Recreation. Located at El Chorro Regional Park in San Luis Obispo, California, the project involved building a 12-foot-long, 6-foot-wide, and 8-foot-tall lumber rack and reconstructing an outdated trailhead kiosk. The lumber rack addressed the need for organized storage of wood and metal pipes, while the kiosk was rebuilt to better serve park visitors. Recycled sheet metal from the client was used for the roof, and local suppliers were selected to support sustainability efforts. Funded entirely by a government entity, there were …

Designing Augmented Reality (Ar) Simulations For Construction Scheduling Education: A Process-Based Approach, Luke Sutherland

Construction Management

This paper presents the design and implementation of an augmented reality (AR) testing protocol developed to assess construction students' planning, sequencing, and real-time decision-making skills. Using Microsoft HoloLens, the simulation exposed students to realistic jobsite scenarios that required them to interpret plans, develop task sequences, and respond to evolving conditions in the field. The protocol was conducted with over 30 construction management students at California Polytechnic State University, San Luis Obispo, and included three progressively complex scenarios focused on underground utilities, concrete formwork delays, and overhead MEP coordination issues. Data was captured through AR interaction logs, time tracking, instructor observation, …

Designing Augmented Reality (Ar) Simulations For Construction Scheduling Education: A Process-Based Approach, Spencer B. Gardner

Construction Management

Construction students often understand what’s being built, but not how it gets built. The process, which is timing, sequencing, adapting to real-world issues is harder to teach with traditional tools like plan sets and Gantt charts. To close that gap, this study explores how Augmented Reality (AR), using Microsoft HoloLens, can bring jobsite logic into the classroom. We developed three AR simulations, each with increasing complexity, to give students hands-on experience with real-world scheduling and coordination problems. The scenarios ranged from basic utility sequencing to adjusting for delays and correcting out-of-sequence installations. Students started with written planning, then moved into …

Construction Clothing Development Project, Reed A. Kellar, Noah R. Maytum

Construction Management

Relative to other industries, the construction market is slow to innovate. One clear example of this is in the clothing worn by its workers. Over the past 100 years, construction clothing and top brands have remained largely similar, even as workwear has begun marketing to larger, non-construction audiences. Construction clothing has become increasingly fashionable in popular culture, and we see this as an opportunity. To adapt to a modern world, this entrepreneurial project seeks to research which areas of construction clothing are lacking according to those in the industry and use this data to create a competitive product/brand that capitalizes …

Intraoperative Dynamic Contrast-Enhanced Fluorescence Imaging For Navigating Open Orthopedic Surgeries, Yue Tang

Dartmouth College Ph.D Dissertations

Infection following trauma is one of the most prevalent and challenging complications faced by orthopedic surgeons. Inadequate tissue perfusion plays a critical role in this complication, as poorly perfused bone can be a nidus for bacterial biofilm formation and promote resistance to antibiotic treatments. Consequently, the management of open fractures and fracture-related infections relies on aggressive and thorough debridement to remove all poorly perfused bone. This thesis focuses on developing an indocyanine green (ICG)-based dynamic contrast-enhanced fluorescence imaging (DCE-FI) to objectively measure bone perfusion during open orthopedic surgeries and guide surgical debridement of devitalized bone.

Novel methodologies were developed to …

Verify All Traffic: Towards Zero-Trust In-Network Intrusion Detection Against Multipath Routing, Ziming Zhao, Zhaoxuan Li, Xiaofei Xie, Zhipeng Liu, Tingting Li, Jiongchi Yu, Fan Zhang, Binbin Chen

Research Collection School Of Computing and Information Systems

With the popularity of encryption protocols, machine learning (ML)-based traffic analysis technologies have attracted widespread attention. To adapt to modern high-speed bandwidth, recent research is dedicated to advancing zero-trust intrusion detection by offloading feature extraction and model inference into the network dataplane. Especially, with the rise of programmable switches, achieving line-speed ML inference becomes promising. However, existing research only considers a single switch node as a relay to conduct evaluation. This is far from real-world deployments involving multiple switches (given that zero-trust security assumes that threats can originate from anywhere, including within the network), particularly the multipath routing phenomenon that …

Circular Economy In Construction: Decision-Making Factors And Future Research Avenues, Bahaa Chammout, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The construction sector is a major consumer of raw materials and a significant contributor to environmental degradation. Circular economy (CE) - an economic and systemic approach aimed at minimizing waste and fostering sustainable resource use - offers a remedy for these impacts. However, CE adoption in construction remains under-researched and limited. Accordingly, there is a need to provide a comprehensive understanding of CE decision-making factors in construction. This paper addresses this research need. First, the authors reviewed 138 journal articles on CE in construction, published between 2015 and 2023, and compiled a comprehensive list of 40 factors influencing CE decision-making. …

Comparative Analysis Of Lab-Data-Driven Models For International Friction Index Prediction In High Friction Surface Treatment (Hfst), Alireza Roshan, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

High Friction Surface Treatments (HFSTs) are often utilized as a spot treatment to enhance selected areas with high friction demand rather than extended pavement sections and are helpful in increasing skid resistance and minimizing road accidents. A laboratory design approach was created to assess the fundamental ideas behind the international friction index (IFI) concept and update the present IFI model parameters for HFST applications based on test findings to gain a better understanding of HFST performance. Two aggregate types in three sizes were tested under controlled polishing cycles. Friction and texture were measured using the Dynamic Friction Tester (DFT) and …

Microstructural Evolution And Rheological Enhancement Of Asphalt–Rubber Binders: Unveiling The Role Of Morphology In Performance, Eslam Deef-Allah, Mohyeldin Ragab, Mohamed Attia, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Understanding the development of an asphalt binder's internal network structure is essential when interacting asphalt and crumb rubber. Thus, the focus of this study was to reveal the development of asphalt–rubber binders' (A-RBs) network structures at different interaction times and their correlation with performance. Atomic force microscopy (AFM) was utilized to image the morphologies of the binders, and the binders' performances were explored rheologically with a dynamic shear rheometer. Extending the interaction time to 8 h and utilizing a soft binder altered the network structures from agglomerated dispersoids—minuscule distributed phase zones embedded in the continuous matrix of the asphalt binder—to …

Development Of A Health And Wellness Assessment For Kytc Personnel, Gabriel Dadi, Farshid Taherpour, Caitlin Pope

Kentucky Transportation Center Research Report

Highway construction workers operate in high-stress, hazardous settings where they have to perform physically taxing labor in environments where exposure to variable weather conditions, heavy equipment, high volumes of vehicle traffic, and other conditions that induce stress and anxiety are the norm. Up to 70% of workers in this industry have reported experiencing mental health issues, including secondary traumatic stress, post-traumatic stress disorder, depression, anxiety, and substance abuse disorders. Few state departments of transportation, however, offer adequate resources staff can draw on to effectively manage their psychological well-being. To help Kentucky Transportation Cabinet (KYTC) roadway maintenance and construction workers develop …

Effect Of Thermal History On The Fracture And Fatigue Behaviors Of Semi-Crystalline Polymers Prepared Via Material Extrusion Additive Manufacturing, Ava M. Lea, Khaled Matalgah, Arief Yudhanto, Trevor J. Fleck

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Material extrusion (MEX) additive manufacturing (AM) is transforming the design and production of complex structures, providing reliable on-demand components. However, the effect of thermal history on the resultant microstructure and damage tolerance of MEX-AM materials is not fully understood. This research investigates the critical role of interfacial thermal history, which is dependent on processing conditions, in determining the fracture and fatigue behaviors of semi-crystalline polymers, as exemplified by polyamide-6 (PA-6). Utilizing infrared thermography, the thermal history, and its dependence on nozzle temperature of extruded PA-6, was investigated. Quasi-static and cyclic tests of compact tension specimens were used to evaluate fracture …

Holotomographic Microscopy Reveals Label-Free Quantitative Dynamics Of Endothelial Cells During Endothelialization, William D. Leineweber, Gabriela Acevedo Munares, Christian Leycam, Raul Michael, Juliette Noyer, Patrick Jurney

Faculty Research, Scholarly, and Creative Activity

Holotomograhic microscopy (HTM) has emerged as a non-invasive imaging technique that offers high-resolution, quantitative 3D imaging of biological samples. This study explores the application of HTM in examining endothelial cells (ECs). HTM overcomes the limitations of traditional microscopy methods in capturing the real-time dynamics of ECs by leveraging the refractive index (RI) to map 3D distributions label-free. This work demonstrates the utility of HTM in visualizing key cellular processes during endothelialization, wherein ECs anchor, adhere, migrate, and proliferate. Leveraging the high resolution and quantitative power of HTM, we show that lipid droplets and mitochondria are readily visualized, enabling more comprehensive …

Ni-Mn-In Heusler Alloy Ribbon For Magnetocaloric Application, Bao Nguyen

Masters Theses

A traditional cooling system, which applies compression technology within the working fluid, has had a lot of negative impacts on the environment and has low efficiency. They have almost reached the thermodynamic efficiency; there is little room for further improvement. Therefore, solid-state cooling systems, especially those that use the magnetocaloric effect (MCE), have drawnmuch interest as an alternative solution for the vapor-compression system. The Heusler alloy, especially Ni-Mn-In in this research, can be an excellent candidate for this application due to its unique properties, such as the shape memory effect and giant MCE. Their giant MCE results from a first-order …

Analysis Of The Effects Of Extractor Orientation On The Performance Of An Electrospray System, Hannah Grace Sargent

Masters Theses

In this thesis, a single-emitter porous electrospray thruster was tested at nine different extractor electrode positions. The nine positions were: center, four slightly offset in each cardinal direction, and four significantly offset in each cardinal direction. Slightly offset was defined as ~25% of the distance from the center to the edge of the extractor orifice (~125 ± 2 μm) and significantly offset was defined as ~60% of the distance from the center to the edge of the extractor orifice (~302 ± 2 μm). Three diagnostic measurements were recorded to determine the effect of the extractor electrode position on thruster operation: …

Linear Systems Over Pura Vida Neutrosophic Algebra, Rayyanu Abdullahi Muhammad, Abdulhadi Aminu

Neutrosophic Systems with Applications

Neutrosophic numbers offers a strong foundation for representing uncertainty, indeterminacy, and imprecision within mathematical systems. Pura Vida Neutrosophic Algebra (PVNA) expands upon max-plus algebra (also known as tropical algebra or path algebra) using neutrosophic numbers. In this study, we propose a novel extension of the Pura Vida Neutrosophic Algebra (PVNA) by formulating and analyzing linear systems within this algebraic context–an area that, to the best of our knowledge, has not been previously examined. Specifically, we introduce the concept of Neutrosophic Max-Plus Linear Systems, develop an algebraic methodology for their representation, and establish the necessary and sufficient conditions for the existence …

Opposition To Renewable Energy Facilities In The United States: June 2025 Edition, Matthew Eisenson, Jacob Elkin, Ivonne Norman, Rebecca Coombs, Chadol Kim, Rex Koenig, Suzan Michalski, Eric Quiroz, Josepi Scariano, Ava Teasdale, Victor Tong, Annabel Williams

Sabin Center for Climate Change Law

Increasing the amount of electricity generated in the United States to power electric vehicles, data centers, and other end uses, while simultaneously reducing greenhouse gas emissions will require deploying a massive number of renewable energy facilities at an unprecedented scale and pace. Although many renewable energy facilities are sited without a problem, local opposition often arises. The Sabin Center’s annual report, Opposition to Renewable Energy Facilities in the United States, documents legal obstacles and challenges that arise during the siting process. In particular, the report focuses on: (a) state laws and local ordinances (“restrictions”) that impede the siting and deployment …

Segmentation With Artificial Intelligence And Automated Calculation Of The Corpus Callosum Index In Multiple Sclerosis, Selahattin Demirbas, Kamil Karaali, Yalcın Albayrak, Nurdan Fidan

Saudi Medical Journal

ABSTRACT Objectives: To determine the corpus callosum index (CCI) differences between chronic phase multiple sclerosis (MS) patients and healthy individuals and to evaluate the corpus callosum segmentation in MS patients using artificial intelligence technologies. The CCI can be reliably measured on magnetic resonance imaging (MRI) and has been proposed as a possible marker of brain atrophy in MS. Methods: In this study, 150 MS patients (disease duration 12.6±5.9 years) and 150 healthy control subjects were scanned. Corpus callosum index was manually measured from the mid-sagittal slices on MRI. A deep learning architecture-based U-Net model was used for automatic corpus callosum …

Building Services Engineering May/June 2025

Building Services Engineering

No abstract provided.

Mitigating Nonlinear Impairments In High-Speed Optical Communication Systems Via Volterra Nonlinear Equalizer, Safa Jabbar Mohammed, Jalil A. Hamadamin

Polytechnic Journal

This paper presents an in-depth investigation into applying a frequency domain Volterra series nonlinear equalizer (FD-VNLE) to mitigate nonlinear impairments in optical communication systems operating at high speeds. The study aims to address the issues presented by nonlinear effects, specifically self-phase modulation (SPM), which significantly degrades system performance at higher power levels. A comprehensive mathematical model of the FD-VNLE was developed to provide theoretical insight, while its implementation was carried out using MATLAB co-simulated with OptiSystem. The performance of the 40 Gbps dual-polarization quadrature phase shift keying (DP-QPSK) system was rigorously evaluated, focusing on critical performance metrics like bit error …

A Proposed Mathematical Framework For Fuzzy It Service Management (F-Itsm) And Neutrosophic It Service Management (N-Itsm), Takaaki Fujita

Neutrosophic Systems with Applications

Fuzzy sets, rough sets, hyperrough sets, intuitionistic fuzzy sets, neutrosophic sets, plithogenic sets , and other frameworks for handling uncertainty are under active research every day. These concepts can model a wide range of real-world phenomena and are frequently investigated to facilitate more efficient decision-making. IT Service Management is a systematic approach to designing, delivering, managing, and improving IT services in alignment with organizational objectives. In this paper, we explore the Mathematical Frameworks for Fuzzy IT Service Management (F-ITSM) and Neutrosophic IT Service Management (N-ITSM), which combine these uncertainty-based ideas with IT Service Management practices.

Evaluating Disaster Relief In Supply Chains Using A Neutrosophic Mcdm Approach, Nada A. Nabeeh

Neutrosophic Systems with Applications

Disaster-prone regions and affected areas encounter persistent challenges in maintaining supply chain continuity due to environmental uncertainties and infrastructure disruptions. Effective supply chain disaster management (SCDM) is essential for relief disaster disruptions, specifically in upstream processes and functions within the humanitarian supply chain. The integration of advanced technologies like the metaverse and Multiple-Criteria Decision-Making (MCDM) methods supports strategic planning and enhances resilience. This study presents a multi-criteria decision-making (MCDM) proposed approach for disaster relief evaluation in supply chain management. The proposed model integrates Interval-Valued Neutrosophic Numbers (IVNNs) to manage uncertainty and ambiguity inherent in disaster various criteria which are often …

Ai Governance And Algorithmic Auditing In Financial Institutions: Lessons From Singapore, Nydia Remolina Leon

Research Collection Yong Pung How School Of Law

This paper examines the role of algorithmic auditing as a mechanism for responsible AI development and deployment in the financial sector, with a particular focus on Singapore’s regulatory and institutional initiatives. Against the backdrop of fragmented global artificial intelligence (AI) governance frameworks, the study analyses how Singapore has developed operational tools — such as the Veritas Toolkit, AI Verify, Project Moonshot and Project Mindforge — that go beyond abstract ethical principles to provide measurable, use-case-specific standards for auditing AI systems. These initiatives contribute to standardising audit practices, enhancing transparency and bridging trust gaps between financial institutions, regulators and stakeholders. The …

Ecological Responsibility In The City: The Surfaces And Volumes Of Urban Mosquito Management, Orlando Woods, Sayd Randle

Research Collection College of Integrative Studies

This paper explores how ecological responsibility becomes distributed across the surfaces and volumes of the city. Our focus is urban mosquito management – specifically, the management of the Aedes aegypti mosquito, the vector by which dengue and several other diseases are transmitted to humans – and the governance strategies deployed in Singapore to manage breeding sites and mosquito outbreaks. Whilst the governance of nature in Singapore is usually undertaken by the state, the effective management of mosquitoes requires responsibility for ecological management to become distributed throughout the city. Residents are expected to assume responsibility for surficial cleanliness and the removal …

Infrastructural Splintering Along The Bri: Catholic Political Ecologies And The Fractious Futures Of Sri Lanka’S Littoral Spaces, Orlando Woods

Research Collection College of Integrative Studies

This article considers the ways in which the material infrastructures of China’s Belt and Road Initiative (BRI) intersect with other infrastructural formations, and how the resulting overlaps can trigger processes of what I call “infrastructural splintering”. These processes cause infrastructure to be experienced in differentiating ways, creating divisive politics where there might once have been unity. Embracing these politics as an analytical starting point undermines the techno-material stability of the BRI, and reveals its more-than-material affects. I illustrate these ideas by developing a case study of the effects of the China-backed Colombo Port City project on Catholic fishing communities that …