Digital Commons Network^™

The Effect Of Surface Treatment On The Fatigue Strength Of Sus316l Additive Manufactured Products, Hitoshi Nishijima, Yuji Kobayashi, Toshiya Tsuji, Kiyotaka Masaki

15th International Conference on Shot Peening

Rotating bending fatigue tests were conducted to investigate the effect of shot peening and barrel finishing on fatigue properties of SUS316L made by laser PBF which was one of additive manufacturing processes. Surface roughness, residual stress, and fatigue strength were investigated for each specimen. As a result, the fatigue strength of the barrel finished specimens was almost same or better than that of the shot peened specimens. Barrel finished specimens increased 4.1 times higher fatigue strength than as-built specimens. The surface roughness of the specimens after barrel finishing was reduced by up to 96% compared to the as-built specimens. On …

Enhancing The Fatigue Strength Of Am Materials Via Mechanical Surface Treatment, Fabian Keil, Jan Schubnell, Sascha Fliegener, Alexander Heiss

15th International Conference on Shot Peening

Additive manufacturing (AM) processes, while enabling the production of intricate geometries, frequently result in suboptimal surface quality, which can significantly restrict the fatigue strength of components when compared to those manufactured using traditional methods. This study explores the effectiveness of mechanical surface treatment (MST) techniques, specifically shot peening and deep rolling, in enhancing the fatigue performance of additively manufactured AlSi10Mg and 316L alloys. A combination of experimental investigations and finite element simulations was employed to evaluate the influence of these treatments on surface integrity, microstructure, and fatigue life. The results reveal that both MST approaches lead to substantial improvements in …

Dynamic Flowsheet Modeling Of Shot Peening Processes, Langdon Feltner, Paul Mort

15th International Conference on Shot Peening

Process flowsheet modeling is used to map and predict performance by integrating sub-models within a system. This paper presents a dynamic flowsheet for shot peening used to track the effects of media characteristics, removal of worn media, and replenishment thereof. Input parameters include media characteristics, media feed rate, velocity (i.e., air pressure), effective impact area (i.e., nozzle setup), and recharge replenishment. The media working mix is described dynamically using tri-modal size and shape characteristics: as-manufactured, conditioned, and worn modes, each having impact-dependent rate coefficients for transition to the next mode, i.e., as-manufactured > conditioned > worn > debris. The flowsheet includes the effect …

Expansion Of Laser Peening Application With A High-Power Microchip Laser On A Robotic Arm, Yuji Sano, Yoshio Mizuta, Satoshi Tamaki, Tomonao Hosokai, Tomoharu Kato, Yoshihiro Sakino, Volker Schneidau, Sebastian Holz, Jörg Behler

15th International Conference on Shot Peening

Laser peening (LP) introduces compressive residual stress (RS) onto the surface of metallic materials using nanosecond laser pulses irradiated through a water layer, thereby effectively suppressing fatigue crack initiation. However, conventional LP systems require large, stationary setups, restricting their use to indoor environments. To overcome this limitation, a portable LP device featuring a finger-sized microchip laser mounted on a collaborative robot arm has been developed. Equipped with a compact power supply and a water circulation/recovery system, the device can operate on-site with minimal setup. Successful processing across various materials has confirmed both compressive RS induction and fatigue life extension. Notably, …

Effects Of Laser Peening On Fatigue Properties Of Welded Aluminum Thin Plates, Kiyotaka Masaki, Yoshio Mizuta, Satoshi Tamaki, Yuji Sano

15th International Conference on Shot Peening

To improve the fatigue properties of welded aluminum alloy thin plates used in transportation machinery, handheld laser peening (HH-LP) was applied to 2 mm-thick A5083-O specimens prepared by bead-on TIG welding. Conventional laser peening often causes warping in thin plates, but the HH-LP treatment using low-energy laser pulses avoids this problem. The HH-LP treatment introduced compressive residual stresses of over 200 MPa on the heat-affected zone (HAZ) of the welded specimens. Fatigue tests under plane bending conditions revealed that the HH-LP treatment significantly improved the fatigue strength of the welded specimens, achieving a level comparable to that of the base …

Origin And Interpretation Of Psi-Splitting And Out Of Plane Shear Stress When Using Diffraction Techniques, Mohammed Belassel, James A. Pineault, Michael E. Brauss

15th International Conference on Shot Peening

Psi-splitting is a phenomenon often observed in interplanar d-spacing vs. sin²ψ plots during the analysis of residual stress measurement data when employing the X-ray diffraction (XRD) method. Deviations from the expected linear relationship between interplanar d-spacing and sin²ψ are typically caused by the presence of out-of-plane shear stresses or inhomogeneous stress distributions within the measured phase of the material. In such cases, the d-spacing values measured at different ψ tilt angles deviate from the anticipated linear trend, resulting in a characteristic splitting of the d-spacing vs. sin²ψ plot data, where the shape of the data in the plot takes the …

Using Semantic Examples To Mitigate Syntactic Conflicts In Constrained Llm Output, Christopher Jonathan Phoenix

Defensive Publications Series

When using a large language model (LLM) with constrained output, such as enforcing a JSON schema, providing examples in the target format can sometimes degrade output quality. This degradation may occur if the model learns syntactic variations from the examples that conflict with the schema, which can cause a schema enforcer to reject certain tokens, potentially leading to lower-quality results. A disclosed technique addresses this issue by providing examples of the desired semantic content in a different syntactic format from the target output. For example, to guide the generation of JSON output, examples can be provided in a different data …

Generation Of Animated Video Sequences From Static Images Using A Structured Motion Graphics Plan, Kyle Lampert

Defensive Publications Series

Creating animated video sequences from static images to support a narration can be a time-consuming and skill-intensive process. A described method may automate aspects of generating documentary-style motion graphics. A system can receive a static image and a narrative description as inputs. For example, a first artificial intelligence (AI) model can perform an analysis to identify relevant points of interest in the image. Subsequently, a second AI model may generate a structured motion graphics plan that defines a sequence of virtual camera movements and on-screen annotations. A rendering engine can then interpret this plan to produce a video file, which …

Monetization Framework For Extended Reality Environments, Mahdi Tayarani Najaran, Ruofei Du

Defensive Publications Series

Conventional advertising models designed for two-dimensional platforms offer opportunities for significant improvement within Extended Reality (XR) environments. These traditional models rely on simplistic metrics like impression counts and fail to leverage the unique spatial and immersive capabilities of XR. A formalized framework for XR monetization is disclosed to address these limitations. The framework’s core technical components include the introduction of novel spatial ad placements, such as world-locked and environment-aware ad types, that are native to three-dimensional spaces. Additionally, the framework introduces advanced interaction metrics that leverage XR device sensors for a more nuanced understanding of user engagement.

At least two …

System And Method For Automated Indentation Testing Of Electronic Displays, Nolan Johnson, Joshua Aganad, Eugene Bykov, Jared Baker, Maxim Sivov, Venkata M K Akula

Defensive Publications Series

Manual indentation testing of electronic displays can be a time-consuming and labor-intensive process that may limit testing efficiency. This disclosure describes an automated system and method for display indentation testing. The system can comprise a testing machine with a programmable XY stage to automatically position a display sample beneath an indenter. The sample may be secured by an adjustable fixture, which can include one fixed and two adjustable brackets to accommodate various display sizes. A custom testing profile may guide the XY stage to multiple pre-defined locations, where a ball indenter can apply a series of prescribed or randomized loads …

A Method For Identifying User Interface Anomalies In Map-Based Applications Using Prompt Engineering, Shu-Wei Cheng, Kamakshi Kodur, Andy Huang, Megha Joshi, Jessica Hua, Oscar Ding, Juan Borgnino, Yoga Sadasivam, Zening Li, Fei Wang

Defensive Publications Series

Identifying user interface (UI) regressions in complex map navigation applications from video recordings may be a subjective process. This disclosure describes a method for analyzing navigation UI behavior using a generative artificial intelligence (AI) model, which can be guided by prompt engineering strategies. The method can involve decomposing the analysis into specific components, such as camera behavior, polyline rendering, and map elements. The AI model may be provided with technical specifications, including quantitative metrics and explicit failure conditions, to analyze video input. This approach can enable the AI to systematically identify deviations and report potential regressions in a structured, time-segmented …

Battery Management System For Solar Powered Li-Ion Battery In Electric Vehicle Applications: A Comprehensive Review, Mustafa Abdulelah Ali, Mohanad Aljanabi, Faris Mohammed Ali

The Nexus of Sustainability and Energy Technology Journal

Electric Vehicle (EV) charging use is going up solar installations on rooftops and on a large scale in power plants are increasing consequently. Therefore, a Battery Management System (BMS), which is the system for managing battery storage, was used to control the solar energy generation to coordinate charging. Such a connection gives the BMS the opportunity to modify charging/discharging patterns with the help of solar energy predictions and prices of electricity from the grid. Moreover, the battery is being protected from aging with the BMS to monitor the state of charge/health of the battery. The BMS protects the Li-ion batteries …

Fdm In Textiles - Present Scenario, Challenges And Future Prospects, Kaniz Farhana, Abdul Mahadin Labid, Mahnur Rahman Jahwa, Sabikun Nahar Sadia, Kamal Tafcir Rayhan, Abu Shadate Faisal Mahamude

The Nexus of Sustainability and Energy Technology Journal

In contemporary society, additive manufacturing, also known as 3D printing, is the most valuable production process. Fused Deposition Modeling (FDM) is the most concentrated version because of its versatility, output quality, speed, and other attributes. The goal of this study is to give readers a thorough understanding of FDM and the graphic examination of its effects in the textile industry. This article provides a detailed examination of FDM technology, covering its history, benefits, drawbacks, sustainability, and contributions to many FDM fields. A particular emphasis on the role that FDM plays in the textile industry, as well as its prospects for …

Study Of Mechanical Properties Of 3d Printed Advanced Polymer, R. Kumaresan, D. Ramasamy, W.S.W. Harun, Sivaraos Sivaraos, Semin Semin, Krishnan Kanny, Habeeb Hattab Habeeb

The Nexus of Sustainability and Energy Technology Journal

This thesis focuses on the mechanical behaviour of ABS which is an advanced polymer material produced by 3D printing. The ABS specimens used in this work were prepared by fused deposition modelling (FDM) to compare the compressive and tensile strength with ASTM D 695. Critical settings within the range of 3D printing process including layer height, fill angle and density were adjusted to investigate the impact on ABS mechanical properties. The effects of these parameters are observed to have a profound impact on the strength and the stiffness of the printed specimens. Further, the optimal conditions for ABS print were …

Sustainable Additive Manufacturing Of Polymer Composites: A Review, Wan Sharuzi Wan Harun, Faiz Ahmad, Farhana Mohd Foudzi, Fujio Tsumori, Arun Kumar Thirugnanasambandam, Mohammed Saber

The Nexus of Sustainability and Energy Technology Journal

Additive Manufacturing (AM) of polymer composites has matured from a prototyping tool into a viable process for functional components. This review critically assesses this progress, focusing on the intersection of performance, sustainability, and industrial readiness. Advancements in AM processes now accommodate diverse reinforcements, from nanoscale fillers to continuous fibres, yielding parts with exceptional mechanical properties. Concurrently, a sustainability strategy has emerged, prioritising bio-based and recycled feedstocks, enhanced process energy efficiency through novel out-of-oven curing, and circular economy principles. However, widespread industrial adoption is hindered by persistent challenges. These include managing fibre-matrix interfacial integrity, the inherent anisotropy of printed parts, complex …

Unlocking Potential: A Case Study Of Solar Photovoltaic Growth And Challenges In Bangladesh, Kaniz Farhana, Borhan Uddin Khan, Aditya Bhattacharjee, Abu Shadate Faisal Mahamude

The Nexus of Sustainability and Energy Technology Journal

This case study looks at the design and technology of photovoltaic cells and assesses Bangladesh’s advancements in using solar energy, including government programs. Because of Bangladesh’s continuous industrialization and population increase, the country’s energy needs are rising quickly. These issues can be resolved by solar photovoltaic (PV) cells, which provide a renewable energy source because of their adaptability, minimal environmental impact, and fuel independence. Due to its advantageous location, Bangladesh receives a significant amount of solar energy every day, which makes solar photovoltaic cells a viable choice. The Bangladeshi government has taken several steps to encourage solar energy, and organizations …

Beta Particles Impact On The Optical Properties Of Tio₂ Thin Films, Farah S. Dakhil, Hassan M.Jaber Al-Ta’Ii

Al-Bahir

TiO₂ is a semiconductor with a wide band gap and is utilized in various applications, including photovoltaics, solar cells, and photocatalysis. In this work, TiO₂ thin films were fabricated using the doctor blade technique and deposited onto glass substrates. The purpose of the study was to investigate how beta irradiation affected the optical properties of the TiO₂ films. The produced samples' absorbance and photon energy were the main subjects of the measurements. While the samples exposed to beta rays for 30, 60, and 90 minutes had direct band gaps of 3.87 eV, 3.75 eV, and 3.66 eV, …

Chacahoula 2025, Volume 92, Alayna Pellegrin

Chacahoula

The 2025 issue of Chacahoula includes December 2024 and May 2025 graduating classes, as well as stunning photography student life on the banks of Bayou Desiard. With features covering students, faculty, and staff, this year's time capsule preserves an academic year in the life of the University of Louisiana at Monroe.

Understanding And Assessing Climate Change: Preparing For Nebraska’S Future, 2024 Climate Change Impact Assessment Report, Deborah J. Bathke, Eric Hunt, Heather Akin, Andrea D. Basche, Jesse E. Bell, Daniel R. Dileo, Ross Dixon, Martha Durr, Tonya Haigh, Francis John Hay, Kristina W. Kintziger, Nicholas A. Mcmillan, Hank Miller, Jerome Okojokwu-Idu, Crystal Powers, Tirthankar Roy, Zhenghong Tang, W. Ryan Wishart, Aaron R. Young, Sarah A. Sonsthagen, Jonathan J. Spurgeon

School of Natural Resources: Faculty Publications

Contents

Report Team

Acknowledgments

Executive Summary

Introduction

Climate Change Contexts: Global, National, and State

Observed Changes in Nebraska's Climate

Projections of Nebraska's Future Climate

Water Systems

Energy

Ecosystems

Agriculture

Human Health

Communities and the Built Environment

Indigenous Peoples

Climate Justice and Equity

The Response of Faith Communities

Nebraskans' Perceptions of Climate Change

Next Steps and Future Work

Supplemental Report: Adaptation, Risks, and Impacts

About the Authors

Faith-based Communities Survey

Evaluated Plans and Assessments

References

Facilitating The Move Towards A Wellbeing Economy Through Supporting Infrastructure: A Review Of Frontrunner Countries, Henry Bartelet, Vincent De Gooyert

Quantitative Methods and Information Technology Faculty Publications

As more governments seek to shift beyond gross domestic product (GDP) as the dominant measure of progress, the concept of a “wellbeing economy” has gained traction. This approach prioritizes human and environmental wellbeing through broader, more holistic policy frameworks. A central question in this transition is what the implications of shifts to a wellbeing economy are for infrastructure investments. In this study, we identify four frontrunner governments, Bhutan, Scotland, New Zealand, and Wales, that have formally adopted wellbeing economy principles. We analyse how each operationalizes the concept and assess the resulting implications for infrastructure planning and investment. Despite shared goals, …

Teaching Science And Technology As Stewardship Of God’S Creation, Fred Haan

University Faculty Publications and Creative Works

Took place on 9/24/25 at Sekolah Pelita Harapan, Lippo Village in Jakarta, Indonesia. The event was called Integration of Faith and Learning in K-12 Education.

Click-Ready Gold Nanoparticles From Aqueous Mechanochemistry: 2-Propynylamine As A Reducing Agent And Surface Ligand, Amber L. Garcia, Brian S. Mitchell, Amanda Reusch, Mark J. Fink, Juan P. Hinestroza, Yelin Ko, Julie P. Vanegas

Physics & Astronomy Faculty Publications

We report a rapid aqueous method for synthesizing monodisperse gold nanoparticles (AuNPs), employing 2-propynylamine as both an intrinsic reducing agent and a surface-stabilizing ligand. This self-mediated process—achieved in a single step—yields spherical AuNPs with an average diameter of 4.0 ± 1.0 nm and a well-defined localized surface plasmon resonance band centered at 520 nm. Acting as a bifunctional molecule, 2-propynylamine simultaneously reduces HAuCl4·3H2O to elemental gold and passivates the nanoparticle surface through coordination via the amine group, while preserving a terminal alkyne (–C≡CH) functionality. This reactive moiety remains exposed and chemically accessible, enabling post-synthetic modification through Cu(I)-catalyzed azide–alkyne cycloaddition. Control …

Hawk's Herald -- September 24, 2025, Roger Williams University

Hawk's Herald

No abstract provided.

Fall 2025 Environmental Sciences Seminar Series, Robyn Barbato, Robyn Barbato

NRESS Seminars

Dr. Robyn Barbato is from the Cold Regions Research and Engineering Laboratory where she studies the permafrost microbiome. She and her research group have thawed and mixed terrestrial ice and permafrost to study the resulting microbiome. They have also cultivated and characterized isolates from permafrost to be􀆩er understand their behaviors and biomaterials.

Cyberbullying Defensive Strategy In Social Media Sessions Via Machine Learning And Cyber Deception, Mohammad Shafiqul Islam

Masters Theses

Cyberbullying poses a significant challenge on social media, where traditional detection systems struggle with the nuanced and dynamic nature of online abuse. This thesis proposes an integrated framework that combines large language model (LLM)-based detection with generative decoy responses to enable real-time protection for victims on platforms like Instagram and WhatsApp. Using models such as Mistral 7B, GPT-3.5 Turbo, and Phi-3 Mini, prompt-based one-shot learning achieved 87% detection accuracy and a 5% F1-score improvement over zero-shot approaches, demonstrating robust identification of text-based bullying. A novel synthetic dataset of 98 multi-turn conversations, designed with diverse subtypes and evaluated for realism, addressed …

Evaluation Of Robotic Swabbing And Fluorescent Sensing To Monitor The Hygiene Of Food Contact Surfaces, Siavash Mahmoudi, Clark Griscom, Pouya Sohrabipour, Yang Tian, Chaitanya Palleria, Philip G. Crandall, Dongyi Wang

Biological and Agricultural Engineering Faculty Publications and Presentations

Effective environmental monitoring is critical for preventing microbial and allergenic cross-contamination. However, manual swabbing methods, commonly used to verify hygienic conditions, are prone to inconsistent results because of variability in pressure, coverage, and techniques. Two novel solutions will be explored to address these challenges: a robotic swabbing system with tactile sensing control, and a fluorescence/absorbance spectrometer for non-contact, protein-based residue detection. The robotic system was evaluated against trained and untrained humans, measuring water pickup, surface coverage, and pressure consistency. Concurrently, the fluorescence system analyzed model poultry protein soil to correlate spectral patterns with contamination levels. The robotic system demonstrated statistically …

Enhancing Patient Understanding And Reducing Readmissions: Implementing A Structured Discharge Teaching Protocol In A Medical-Surgical Unit, Jawany Joseph

DNP Projects

Background

Hospital readmissions remain a critical challenge in healthcare, especially in medical-surgical units. The high rates of hospital readmissions are often linked to inadequate patient understanding of discharge instructions. Many patients struggle with deciphering discharge plans, leading to medication errors, missed follow-up appointments, and poor self-care management. A structured discharge teaching protocol has the potential to enhance patient comprehension, improve adherence to port-discharge care, and reduce readmission rates.

Project Goals

This project aimed to improve understanding of discharge instructions, reduce hospital readmissions, and enhance patient satisfaction with the discharge process. Specific objectives included increasing patient comprehension from 65% to 90% …

Where The Buffalo Roam: Ungulate Influences On Quaking Aspen And Willow Communities In The Greater Yellowstone Ecosystem, J. Boone Kauffman, Dian L. Cummings, Robert L. Beschta, William J. Ripple

Aspen Bibliography

Quaking aspen (Populus tremuloides) and willows (Salix spp.) are keystone species of montane and shrub-steppe landscapes of the Western United States. Intact communities dominated by these species provide a wide range of ecosystem services, harboring an exceptional proportion of landscape biodiversity. Land use, especially overgrazing by large ungulates, is among the greatest threats to these ecosystems. To examine the effects of wild ungulates and levels of grazing at Yellowstone National Park (YNP) and the adjacent Gallatin National Forest, we sampled plant community composition and vegetation structure of aspen and willow communities both inside and outside of exclosures. …

The Lumberjack, September 24, 2025

Cal Poly Humboldt's Student Newspaper

The student newspaper of Humboldt State University.

Commonwealth Times 2025-09-24

Commonwealth Times, 1969-

No abstract provided.