Digital Commons Network^™

Planned, Taught, Learnt: Analysis Of Transversal Skills Through Curriculum Using Portfolio, Helena Kovacs, Tamara Milosevic, Alexandra Niculescu

Research Papers

There is an everlasting effort in education to successfully ensure that the intended learning objectives are clearly taught and effectively learnt at the end of the educational cycle. This has been especially difficult in teaching and learning complex sets of competencies, for example, transversal skills in domains such as engineering education. Yet, studies focusing on transversal skills often address student learning outcomes, but rarely how teachers teach them, and even less so how they are represented in the written curriculum. In order to create a more comprehensive understanding of how transversal skills are communicated, taught and learnt in engineering education, …

Developing Teamwork Skills Through Simultaneous Group Project Courses, Tuomo Eloranta

Research Papers

The popularity of project-based learning (PBL) has led to a situation where engineering students take several group project courses at the same time. From a student perspective, this can generate considerable issues. Previous research has indicated that already single PBL courses can be challenging, especially time and task management-wise and intuitively overlapping PBL courses compound this complexity. As existing literature on this topic is relatively sparse, the goal of the present study is to examine what kind of student challenges simultaneous PBL courses generate, how students navigate those and what kind of additional learning can it foster. The results should …

Develop An Interdisciplinary Course Using The Twente Interdisciplinarity Toolbox, Miles Macleod, Coralie Johnson, Klaasjan Visscher, Jan Van Der Veen

Workshops

The ability to engage in interdisciplinary research and problem-solving are essential skills for contemporary engineers, however designing and delivering effective learning opportunities to reach these ideals, is often not straightforward [1]. Educators are often faced with a plethora of challenges, and interdisciplinary courses often do not run as smoothly as disciplinary ones. In this workshop, the primary goal was to stimulate participants to consider a few common design scenarios modeled on real-life cases and to apply some of the main design concepts and questions employed by a new online platform the Twente Toolbox which aims to assist instructors with interdisciplinary …

Structuring Conversations Around Course Design, Jacques Lanarès, Marc Laperrouza, Emmanuel Sylvestre

Workshops

Constructive alignment helps both students and teachers to achieve intended learning outcomes. The workshop proposes to introduce participants to the elements and mechanics of the pedagogical coherence canvas (PCC), a tool developed to improve constructive alignment throughout course design. Participants will familiarise themselves with the process by applying it to the design of a course or training. This hands-on workshop will help participants to develop a practical understanding of how to use the PCC to design a course following constructive alignment principles.

How Diverse Are Global Perspectives On Diversity, Equity, And Inclusion In Engineering Education?, Jan Van Maele, Becky Bergman, Inês Direito, Homero Murzi

Workshops

The SEFI Special Interest Group on Gender & Diversity has recently been renamed as Diversity, Equity and Inclusion, broadening the definition from a focus on gender to embrace a wider range of diverse identities – such as language and cultural background, religion, physical ability, and socioeconomic status – and to promote and support equity and inclusive practices within SEFI and beyond. In the process of redefining the Special Interest Group’s mission, it has become clear that definitions of diversity, equity and inclusion may vary considerably between different contexts and institutions. Therefore, it is relevant for the engineering education community to …

Using A Spiral Approach To Facilitating Engineering Research And Education In Real Industry Settings, Marcus Vinicius Pereira Pessôa, Kostas Nizamis

Workshops

Engineering research and education is often done in collaboration with industrial partners through the Industry as Laboratory (IaL), and Challenge-Based Learning (CBL) paradigms. However, its findings are not always adopted, despite the use of well-established and rigorous research methodologies. Academia employs oftentimes extensive and time consuming analyses, while industry operates in smaller cycles with tangible intermediate results. This can lead to the industry losing interest in the research. The Spiral Approach for Systems Engineering Research (SASER) is an approach that aims to mitigate that risk. This can have a twofold benefit in the industry remaining interested, but also the researcher …

Planning Interdisciplinary Artificial Intelligence Courses For Engineering Students, Johannes Schleiss, Sebastian Stober

Workshops

As Artificial Intelligence (AI) becomes increasingly important in engineering, instructors need to incorporate AI concepts into their subject-specific courses. However, many teachers may lack the expertise to do so effectively or don’t know where to start. To address this challenge, we have developed the AI Course Design Planning Framework to help instructors structure their teaching of domain-specific AI skills. This workshop aimed to equip participants with an understanding of the framework and its application to their courses. The workshop was designed for instructors in engineering education who are interested in interdisciplinary teaching and teaching about AI in the context of …

Application-Based Learning Of Signal Analysis Methods With The Help Of A Graphical Open-Source Software, Tim Hetkämper, Kevin Koch, Manuel Webersen, Leander Claes

Workshops

In almost all engineering disciplines, engineers need to evaluate and extract information from time-dependent quantities, making signal processing and analysis a central topic in engineering education. The theoretical foundation is anchored in many courses, however, often only few application-based learning opportunities are offered. To provide these opportunities without the need for expensive hardware, a graphical open-source software is developed. This workshop offers a first opportunity to explore how a graphical software can be used to learn signal processing and analysis methods.

Teaching In Student-Centred Active Learning Spaces: How Relational, Pedagogical, Spatial, And Technological Aspects Intertwine And Affect The Learning Environment, Guri Sivertsen Korpås, Trine Højberg Andersen, Magnus Strøm Kahrs, Gabrielle Hansen, Kari Anne Flem Røren

Workshops

Higher educational institutions internationally have shown a growing interest in developing learning spaces that support student-centred learning approaches. For engineering education, this development aligns well with an increased emphasis on cross-disciplinarity and a system-thinking approach. However, research and our own experiences as teachers and evaluators of such learning spaces suggest that teachers who enter these learning spaces need support, as the complexity of the teaching situation becomes more apparent, compared to the traditional lecture hall. In this workshop, we will investigate this complexity together with the participants.

Participants can expect to leave the workshop with a better understanding of:

• a …

Supporting Undergraduate Engineering Student Mental Health, Sarah Wilson, Karin Jensen, Jo-Anne Tait

Workshops

No abstract provided.

Empathy In Engineering And Ethics Education: Resources To Support The Engineering Education Global Community, Diana Bairaktarova, Inês Direito

Workshops

No abstract provided.

Exploring The Fabrication Lab Concept For Learning Sustainable Co-Innovation In Industrial Engineering Education – An Action Research Case From Austria, Selim Erol, Alice Grano

Research Papers

According to recent studies, cooperative innovation between universities and industry, especially with small and medium firms, is not as frequent as expected. Case-studies of regional innovation systems have shown that open access to state-of-the-art research infrastructure, services, skills and activities are needed to achieve long-term innovation partnerships. Co-innovation requires particular skills beyond technical knowledge, which are not always addressed in engineering curricula at university. Fab labs are a concept that potentially fosters students in the acquisition of such skills. In this paper, we describe our experiences in designing, building and running a fab lab as a new element for industrial …

Preparing Teachers For Culturally Diverse Engineering Classrooms: Sharing Experiences And Activities, Becky Bergman, Jan Van Maele

Workshops

No abstract provided.

Results Of Surveys Among Pupils, Students And Employers On Interests In And Contents Of Study Programmes In Civil Engineering, Geodesy, Environmental Sciences And Sustainable Mobility In Germany, Anke Lohbeck, Karsten Strauch, Markus Oeser

Research Papers

The shortage of skilled workers in the engineering sector threatens the development and sustainable transformation of the economy in Germany. In this context, the current de-cline in the number of first-year students in civil engineering, environmental engineering, geodesy and traffic engineering appears all the more alarming. Surveys which can provide basic data for the elimination of the shortage of skilled workers in engineering and the increase in the number of first-year students in the above-mentioned degree programmes were started surveys among pupils, students and representatives of state authorities in 2022. Furthermore, one of the surveys was used to analyse the …

Exploring The Reliability, Time Efficiency, And Fairness Of Comparative Judgement In The Admission Of Architecture Students, Lotte Van Den Heuvel, Nina Lotte Bohm

Research Papers

It is common in architecture education to quantify the quality of assignments into grades, often done by one or two teachers using rubrics. However, this can have several downsides. It suggests an objective preciseness that is debatable for the creative assignments in the field of architecture, and the assessment is dependent on the judgement of only one or two people. Comparative judgement (CJ) offers an alternative to rubric-based assessment by applying pairwise comparison to student assignments, resulting in a ranking instead of a grade.

We used a mixed methods approach to compare the reliability, time efficiency, and fairness of CJ …

How Do Teachers Respond To Sustained Change?, Roger Hadgraft, Franziska Trede, Monika Rummler

Research Papers

Higher Education is facing profound shifts. Employers seek graduates who can work effectively with others in rapidly changing contexts, defined by globalisation, diversity, digitalisation, climate change, complexity, a European war, and a recent global pandemic. The latter caused an instantaneous switch to online learning, where academics were forced to conduct their normally face to face classes through video conferencing tools. The calls for sustained change are challenging academics to rethink their traditional teaching roles and to develop new understandings of future-oriented learning methods and goals for their students. This paper describes the research we have conducted into how academics have …

Disruptions To The “Modeled Minority” In Engineering: Why Do Some Asian American Students Leave Engineering?, Michelle Choi Ausman, Qin Zhu

Research Papers

Asian American students are the largest non-White racial group in US undergraduate engineering, but they are often labeled as the "model minority." This stereotype confines them to STEM majors, limiting their access to diversity, equity, and inclusion (DEI) programs. Little attention has been given to why some Asian American students leave engineering. To address this gap, a pilot study using semi-structured interviews aims to explore the reasons behind their decision to leave the field or change their major. The study seeks to contribute to engineering education scholarship by promoting more inclusive learning environments for Asian American students and providing recommendations …

Sustainability Engineering Education – An Outlook On Uk Higher Education Providers, Maria Livada, Nikos Chrysanthopoulos, Nicolau Iralal Morar

Research Papers

The aim of this paper is to assess the extent to which United Kingdom (UK) universities are incorporating sustainability into their engineering curricula. To achieve this, data from the Universities and Colleges Admissions Service (UCAS) and university websites were analysed using a text mining approach. The findings reveal that UK higher education providers are gradually increasing their offerings of Sustainable Engineering (SE) courses at both undergraduate and postgraduate levels. The most prominent sustainability themes integrated into engineering curricula are energy, design, and construction. Furthermore, the analysis of courses and their modules shows that 50% of UK postgraduate sustainable engineering courses …

Minutes 10-10-2023 | Safety Committee, Megan Meade

Safety Committee Minutes

No abstract provided.

Rulemaking By Ambush: How Prohibitions Against It Became Dead Letters, Arthur G. Sapper

Brigham Young University Journal of Public Law

No abstract provided.

Updating The Berne Convention For The Internet Age: Un-Blurring The Line Between United States And Foreign Copyrighted Works, Ethan Schow

Brigham Young University Journal of Public Law

John Naughton, notable journalist and academic, has asserted that “[common sense] should also revolt at the idea that doctrines about copyright that were shaped in a pre-Internet age should apply to a post-Internet one.” And yet, in crucial aspects of international law, this is the situation in which the world finds itself today. The Berne Convention for the Protection of Literary and Artistic Works (the “Berne Convention” or the “Convention”) is one of the most important multinational agreements concerned with copyright law, but it has not been amended since September 28, 1979. Although the internet technically existed in an early …

Sense Of Belonging Among Technology Students In Finland, Susanna Bairoh, Johanna Naukkarinen

Research Papers

This paper examines Finnish technology students’ belonging in technology. The phenomenon is studied at the level of the field (belonging in the field of technology) and at the level of institution (belonging in one’s study community). The data were collected within the annual student survey conducted by a professional organization for academic engineers in 2022, and analysed statistically. Results suggest that men strongly experience they belong in technology while women express some doubts, and non-binary respondents are even less certain of their belonging. Gender differences in belonging in the field of technology are more prominent than those of belonging in …

Help Them Grow – The Eng-Ist Tool - Supporting Students’ Personal Development Process To Stimulate Lifelong Learning, Una Beagon, Aimee Byrne, Caitriona Depaor, Lynn Van Den Broeck, Rani Dujardin, Sofie Craps, Johanna Naukkarinen

Workshops

No abstract provided.

Soft Skills Of Engineering Students, Nael Barakat, Aziz Shekh-Abed

Research Papers

Soft skills are a combination of personal qualities and interpersonal abilities that enable individuals to work effectively with others, communicate clearly, and collectively solve problems. Soft skills are required for effective problem-solving and decision-making. Soft skills, such as communication, teamwork, and empathy, are essential for developing a collaborative culture that encourages high order thinking and building relationships. By developing these soft skills, engineering students can improve their chances of success both in their academic pursuits and in their future careers. The goal of the study was to evaluate soft skills among engineering students, to provide insight to educators that can …

Employment Pathways For Emerging Talent: Evaluating The Certificate In Computer And Data Science (Cds), Andres Felipe Salazar Gomez, Aikaterini Bagiati, Gillian Walsh, Lana Cook, Admir Masic

Research Papers

This research paper presents the results of the first evaluation of the learning experience, challenges and opportunities of the Certificate in Computer and Data Science (CDS). Specifically, it evaluates two different real-life experiential learning opportunities (ELOs): supervised internships and self-guided projects.

MIT Emerging Talent, an initiative that expands upon the efforts of the MIT ReACT (Refugee Action Hub), provides talented learners a platform to advance their skills, leverage their expertise, access a professional career, and become leading change agents in their communities. The CDS is a 12 month-long online learning program that opens education to employment pathways for emerging talent, …

Engineering Education Research: Reviewing Journal Manuscripts Fairly, Constructively, Effectively, Kristina Edström, David Knight, Joyce Main, John Mitchell, Jonte Bernhard, Shannon Chance, Una Beagon, Maartje Van Den Bogaard, Rebecca Broadbent, Xiangyun Du, Greet Langie, Diana Martin, Jason Power, Fiona Saunders, Roland Tormey

Workshops

Peer review is the mechanism for quality control in academic journals. When a manuscript is submitted to a journal, the editors invite other researchers – peers – to review it anonymously. The reviews should serve to support the journal editors in making decisions, and to support the authors in improving the manuscripts before publication. Therefore, reviews need to be fair and constructive. As reviewing can also take considerable effort, it is useful for the reviewer to consider how to do it effectively. Given the important role of peer review in a field, and the considerable effort it takes, it is …

Who, What, How? Tackling Skills Challenges: Future Relevance, Stakeholder Differences, And Teaching Hurdles, Neil Cooke, Raffaella Manzini, Matteo Di Benedetti, Natalie Wint, Jenny Griffiths, Francesc Torres, Thies Johannsen, Ann-Kristin Winkens, Emanuela Tilley, Kamel Hawwash, Nicolau Morar

Workshops

The Engineering Skills Special Interest Group (SIG) ran a workshop on the current challenges in teaching engineering skills. This workshop employed the “world café” participatory method where attendees visited three tables for a structured discussion with a member of the SIG. Each table posed a different question: On the What? table we discussed which skills are most relevant for future practitioners. The Who? table focussed on the differences in the way that various professional skills are conceptualised by main stakeholders. Finally, at the How? table we discussed the facilitators and barriers in designing and delivering skills education. The outcome of …

Getting Started – Hands-On Producing Lecture Films, Anja Pfennig

Workshops

Lecture videos are more and more implemented in higher engineering education to be used widely by students because very often literature only presents results but not how to get there. Lecture videos may close this gap and visualize the sometimes obvious but still hard-to-understand scientific background. To attract students and become a fully accepted learning material these videos need to be of a certain standard. Based upon our 8 years of experience it is important is to involve students directly into the concept and making-of (peer-to-peer approach), because students` needs and their perspectives on teaching material are directly included in …

Eclipses 101: Ways To Stay Safe And Enjoy, Micah Hardge

Browse All News

No abstract provided.

What Do Engineers Do With What They Know: Observing Specialized Technical Knowledge In Practice, Zach Simpson, Corrinne Shaw, Nicky Wolmarans

Research Papers

The gap between engineering education and practice has been subject to considerable research attention. We look at studies of engineering practice with a view to informing education. Our interest is in identifying technical knowledge and how it is used in practice, as well as what kind of technical knowledge is used but not taught. This paper seeks to systematically review the existing literature on engineering practice, drawing from and adding to a prior data set developed by Andrea Mazzurco and colleagues, who found that there was a gap in studies of specialised technical knowledge in practice. Investigating their dataset we …