Digital Commons Network^™

Weaving Academic Grace Into The Fabric Of Online Courses And Faculty Training: First-Year Engineering Student Advice For Online Faculty During The Covid-19 Pandemic And Faculty Responses, Michelle E. Jarvie-Eggart, Amanda Marie Singer, Marika Seigel, Mary Raber, Thomas M. Freeman, Brett Hamlin, Amy Hamlin, Michael R. Meyer

Michigan Tech Publications, Part 1

Background: In the spring of 2020, COVID-19 forced the majority of higher education online, resulting in a wave of new online students uniquely positioned to offer fresh perspectives and advice to faculty.

Purpose: This study investigated the advice offered to online faculty by first-year engineering (FYE) students who were forced online during the pandemic and faculty ideas to address the student advice.

Methods: This multi-methods study included qualitative data from 233 FYE students (in 67 teams across four class offerings) who provided advice for online faculty through an end-of-year team assignment, leveraging analytic induction methods for analysis. The Quality Matters …

A Privacy Preserving Online Learning Framework For Medical Diagnosis Applications, Trang Pham Ngoc Nguyen

Theses: Doctorates and Masters

Electronic Health records are an important part of a digital healthcare system. Due to their significance, electronic health records have become a major target for hackers, and hospitals/clinics prefer to keep the records at local sites protected by adequate security measures. This introduces challenges in sharing health records. Sharing health records however, is critical in building an accurate online diagnosis framework. Most local sites have small data sets, and machine learning models developed locally based on small data sets, do not have knowledge about other data sets and learning models used at other sites.

The work in this thesis utilizes …

Social Disorganisation Theory And Violent Crime: A Spatial-Econometric Analysis Of Chicago And Sydney, Anthony N. Greening

Theses: Doctorates and Masters

The spatialisation of violent crime is explored in two large case studies, Chicago and Sydney, using spatial econometric methods and macro-sociological variables derived from Social Disorganisation Theory.

Social Disorganisation Theory (SDT) is introduced in terms of its formulation in response to highly specific conditions arising in Chicago, as well as its adoption of methodological and theoretical developments from existing traditions. This specificity belies its breadth of application and enduring presence in criminology. With “Social Disorganisation Theory” hosting a wealth of highly nuanced academic dialogue conducted under its banner, current incarnations of SDT appear as branches on an evolutionary tree. This …

Post-Exercise Arterial Stiffness Responses Are Similar After Acute Eccentric And Concentric Arm Cycling, Travis Wakeham, Dakota J. Anderson, Steven J. Elmer, John J. Durocher

Michigan Tech Publications, Part 1

Upper-body resistance exercise effectively increases muscular strength, but may concomitantly increase arterial stiffness. Eccentric exercise can lead to muscle soreness and arterial stiffness in untrained participants. However, it is unclear if upper-body eccentric exercise could reduce arterial stiffness in a single session for participants that have undergone progressive training. Our purpose was to compare acute responses to upper-body eccentric (novel, ECCarm) and concentric (traditional, CONarm) steady state arm cycling. We hypothesized that arm arterial stiffness would be reduced after both ECCarm and CONarm. Twenty-two young healthy individuals performed either ECCarm ( = 11) or CONarm ( = 11) at ~70% …

Wax Models In Barcelona: From University Anatomical Sculptors To Makers Of Dermatological Waxworks En Ceroplastics, The Science Of Wax, Ed. Roberta Ballestriero, Owen Burke And Francesco Maria Galassi, Chloe Sharpe

Capítulos de libros

The art of wax modelling or ceroplastics has an ancient origin, from early Egyptian, Greek and Roman times. It was re-discovered between the 13th - 14th centuries in Florence with the cult of votive offerings; with the advent of Neoclassicism it extended into a more scientific environment, flourishing in the study of normal and pathological anatomy, obstetrics, zoology and botany. On the 7th and 8th June 2019, the 2nd edition of the International Congress on Wax Modelling took place in the University of Padua. The meeting followed that held in September 2017 at the Gordon Museum of Pathology, King's College …

Comparison Of The Mental Burden On Nursing Care Providers With And Without Mat-Type Sleep State Sensors At A Nursing Home In Tokyo, Japan: Quasi-Experimental Study, Sakiko Itoh, Hwee-Pink Tan, Kenichi Kudo, Yasuko Ogata

Research Collection School Of Computing and Information Systems

Background: Increasing need for nursing care has led to the increased burden on formal caregivers, with those in nursing homes having to deal with exhausting labor. Although research activities on the use of internet of things devices to support nursing care for older adults exist, there is limited evidence on the effectiveness of these interventions among formal caregivers in nursing homes. Objective: This study aims to investigate whether mat-type sleep state sensors for supporting nursing care can reduce the mental burden of formal caregivers in a nursing home. Methods: This was a quasi-experimental study at a nursing home in Tokyo, …

Contextualized Knowledge-Aware Attentive Neural Network: Enhancing Answer Selection With Knowledge, Yang Deng, Yuexiang Xie, Yaliang Li, Min Yang, Wai Lam, Ying Shen

Research Collection School Of Computing and Information Systems

Answer selection, which is involved in many natural language processing applications, such as dialog systems and question answering (QA), is an important yet challenging task in practice, since conventional methods typically suffer from the issues of ignoring diverse real-world background knowledge. In this article, we extensively investigate approaches to enhancing the answer selection model with external knowledge from knowledge graph (KG). First, we present a context-knowledge interaction learning framework, Knowledge-aware Neural Network, which learns the QA sentence representations by considering a tight interaction with the external knowledge from KG and the textual information. Then, we develop two kinds of knowledge-aware …

Can Brazilian Jiu Jitsu Be A Viable Treatment Option For Law Enforcement Officers With Ptsd?, Megan Rinderer

Graduate School of Professional Psychology: Doctoral Papers and Masters Projects

Law enforcement officers (LEO) are more likely to experience symptoms of PTSD when compared to the general population yet are less likely to seek mental health treatment (Jetelina et al., 2020). Given that LEO face unique occupational stressors and repeated exposure to traumatic events, treatment for PTSD among law enforcement populations poses unique challenges for clinicians. The combination of these variables precludes officers from seeking and receiving mental health services. Research regarding the efficacy of Brazilian Jiu Jitsu (BJJ) as a psychotherapeutic intervention is limited. To date, no studies have examined the use of BJJ to mitigate symptoms of PTSD …

Understanding The Contribution Of Metabolism To Mycobacterium Tuberculosis Drug Tolerance, Amanda N Samuels, Erin R Wang, Gregory A Harrison, Joy C Valenta, Christina L Stallings

2020-Current year OA Pubs

Treatment of

Fibroblast Growth Factor Receptor Signaling In Cardiomyocytes Is Protective In The Acute Phase Following Ischemia-Reperfusion Injury, Dzmitry Matsiukevich, Stacey L House, Carla Weinheimer, Attila Kovacs, David M Ornitz

2020-Current year OA Pubs

Fibroblast growth factor receptors (FGFRs) are expressed in multiple cell types in the adult heart. Previous studies have shown a cardioprotective effect of some FGF ligands in cardiac ischemia-reperfusion (I/R) injury and a protective role for endothelial FGFRs in post-ischemic vascular remodeling. To determine the direct role FGFR signaling in cardiomyocytes in acute cardiac I/R injury, we inactivated

Personalized Practice Dosages May Improve Motor Learning In Older Adults Compared To "Standard Of Care" Practice Dosages: A Randomized Controlled Trial, Geneviève N Olivier, Leland E Dibble, Serene S Paul, Keith R Lohse, Christopher S Walter, Ryan J Marker, Heather A Hayes, K Bo Foreman, Kevin Duff, Sydney Y Schaefer

2020-Current year OA Pubs

Standard dosages of motor practice in clinical physical rehabilitation are insufficient to optimize motor learning, particularly for older patients who often learn at a slower rate than younger patients. Personalized practice dosing (i.e., practicing a task to or beyond one's plateau in performance) may provide a clinically feasible method for determining a dose of practice that is both standardized and individualized, and may improve motor learning. The purpose of this study was to investigate whether personalized practice dosages [

Bio-Composite Of Nipa Palm Husk Derived Activated Carbon/Poly(Butylene Succinate): An Effective Agricultural Waste Based Adsorbent For Ammonia Removal, Chaichana Piyamawadee, Viboon Sricharoenchaikul, Duangdao Aht-Ong

Journal of Metals, Materials and Minerals

In this work, activated materials were successfully prepared by pyrolyzing various ratios of Nipa palm husk powder to potassium hydroxide  (1:1, 1:2, and 1:3) at predetermined temperatures (500℃, 600℃, and 700℃). The surface area was obtained from nitrogen isotherms using the Brunauer-Emmett-Teller (BET) equation. The surface area of the prepared activated carbon was increased with decreasing potassium hydroxide impregnation ratio and increasing pyrolyzing temperature. The highest surface area was 1,211 m2×g-1. In contrast, acidic surface functional groups investigated by Boehm’s titration were increased with decreasing pyrolyzing temperature and impregnation ratio. Ammonia removal capacity was increased with an increase in the …

Effect Of Pre-Carbonization Temperature On The Porous Structure And Electrochemical Properties Of Activated Carbon Fibers Derived From Kapok For Supercapacitor Applications, Nu Myat Thazin, Nattapat Chaiammart, Myo Myo Thu, Gasidit Panomsuwan

Journal of Metals, Materials and Minerals

Activated carbon fibers (ACFs) were successfully synthesized from kapok via a two-step process: (i) pre-carbonization and (ii) chemical activation. The pre-carbonization temperature was varied at 300℃, 400℃, and 500℃. The mixing ratio of the pre-carbonized product and potassium hydroxide (KOH) was 3:1, while the activation temperature was 800℃. The effect of pre-carbonization temperature on the morphology, surface area and porosity, chemical functional group, and phase structure of ACFs was investigated and discussed. The characterization results showed that ACFs exhibited an amorphous carbon structure with a hollow fiber shape resembling the kapok. The specific surface area decreased from 487 m2×g-1 to …

Synthesis And Phosphate Adsorption Performance Of Elephant Dung Biochar Modified With Magnesium And Iron, Navod Abeysinghe, Kaewta Jetsrisuparb, K.H.T. Karunarathna, E.P.S. Chandana, Siraprapa Suwanree, Pornnapa Kasemsiri, Prinya Chindaprasirt, Jesper T.N. Knijnenburg

Journal of Metals, Materials and Minerals

The large production volume combined with the high lignocellulose content makes elephant dung an attractive and underutilized biomass resource, but also presents waste management problems for elephant orphanages. This study explored the conversion of elephant dung into biochars by slow pyrolysis at 500°C for the recovery of phosphate. The unmodified biochar (BC500) had a specific surface area (SBET) of 62.5 m2×g-1 with point of zero charge (pHPZC) of 7.7. Biochar modification with MgCl2 (MgBC500) and FeCl3 (FeBC500) by pre-pyrolysis treatment affected the SBET (48.7 m2×g-1 and 259.4 m2×g-1, respectively) and pHPZC (8.7 and 3.3, respectively). In FeBC500, Fe was present …

Use Of Oil Palm Frond Waste To Reinforce Poly(Lactic Acid) Based Composites With The Improvement Of Interfacial Adhesion By Alkali Treatment, Nattakarn Hongsriphan, Jidapa Subsanga, Pimpisa Suebsai, Sunisa Sitthipong, Pajaera Patanathabutr

Journal of Metals, Materials and Minerals

Oil palm frond waste was used as reinforcing fibers for biodegradable poly(lactic acid) or PLA in order to produce green composites that increased the value of agricultural waste. The alkali-treated oil palm frond (OPF) fibers of 30 wt% or 40 wt% were compounded with PLA and moulded into specimens. The alkali treatment was 0 wt%, 1 wt%, 3 wt%, and 5 wt% of the fibers for compatibility improvement with PLA matrix. It was found that the alkali-treated PLA/OPF composites adding 30 wt% and 40 wt% had the flexural modulus to be about 55% and 75% higher than those without the …

Amino-Containing Polymer-Coated Magnetite Nanoparticles As Nano-Adsorbents For Bisphenol A: Synthesis, Kinetic And Thermodynamic Study, Jakkrit Tummachote, Metha Rutnakornpituk, Duangdao Channei, Filip Kielar, Boonjira Rutnakornpituk

Journal of Metals, Materials and Minerals

Magnetite nanoparticles coated with poly(dimethyl aminoethyl methacrylate) (PDMAEMA@MNPs) and their quarternized form (PQDMAEMA@MNPs) were successfully synthesized and used as nano-adsorbents for bisphenol A (BPA). The particles were spherical with the average particle size between 10 and 20 nm in diameter with a moderate degree of nanoclustering (ca.150-200 particles/cluster). In terms of adsorption properties, the PDMAEMA@MNPs exhibited a higher BPA adsorption capacity (1.05 mg/g MNP at pH 9) than the quaternized form (0.50 mg/g MNP at pH 9). Equilibrium isotherm, kinetic, and thermodynamic characteristics of BPA adsorption on the PDMAEMA@MNPs were investigated. It was found that the BPA adsorption …

Utilization Of Freeze Thaw Process For Polyvinyl Alcohol/Sodium Alginate (Pva/Sa) Hydrogel Composite, Rapeepan Muangsri, Piyachat Chuysinuan, Thanyaluck Thanyacharoen, Supanna Techasakul, Pongpat Sukhavattanakul, Sarute Ummartyotin

Journal of Metals, Materials and Minerals

Polyvinyl alcohol/sodium alginate (PVA/SA) hydrogel was successfully prepared by freeze thaw process. Without crosslinking agent, hydrogel was formed by using 3, 5 and 7 consecutive cycles of freeze thaw. Hydrogel can be formed by hydrogen bonding formation between OH-group of sodium alginate and polyvinyl alcohol throughout network. Scanning electron microscope reported that microstructure of hydrogel was well packed. The interconnect porosity was also observed. Differential scanning calorimetry exhibited that two exothermic peaks at temperature of 110℃ and 225℃ were observed due to evaporation of water molecule and melting temperature of hydrogel, respectively. The swelling behavior was rapidly increased within initial …

Elastic Properties Of Boro-Tellurite Glasses Doped With Europium Oxide, Chinnappareddy Devaraja, G. V. Jagadeesha Gowda, Bheemaiah Eraiah, G. K. Narasihma Murthy

Journal of Metals, Materials and Minerals

The glass series of xEu2O3-5PbO-25TeO2-(70-x) B2O3, where x=0.1 mol% to 0.6 mol% were prepared by employing the conventional melt quenching method. The non-crystallinity of prepared BTE glasses was examined by the X-ray diffraction method. The very important mechanical properties such as elastic moduli, Debye temperature, Poisson’s ratio, fractional bond connectivity, softening temperature, acoustic impedance, and the thermal expansion coefficient of the BTE glasses have been studied by measuring ultrasonic velocity. The experimental results indicate that the calculated parameters strongly depend on increasing Eu2O3 concentration. The elastic moduli of the prepared samples were found to decrease with Eu2O3 concentration and this …

Graphene Derivatives Reinforced Metal Matrix Nanocomposite Coatings: A Review, Hamed Sadabadi, Omid Ghaderi, Amir Kordijazi, Pradeep K. Rohatgi

Journal of Metals, Materials and Minerals

Due to the extraordinary mechanical, thermal, and electrical properties of graphene, graphene oxide (GO), and reduced graphene oxide (rGO), these materials have the potential to become ideal nanofillers in the electrodeposited nanocomposite coatings. This article provides an overview of literature on the improvements of properties associated with graphene, GO, and rGO-reinforced coatings, along with the processing parameters and mechanisms that would lead to these improvements in electrodeposited metal matrix nanocomposite coatings, where those affected the microstructural, mechanical, tribological, and anti-corrosion characteristics of coatings. The challenges associated with the electroplating of nanocomposite coatings are addressed. The results of this survey indicated …

A Molecular Dynamics Simulation Study To Investigate The Effect Of C60 On Thermo- Mechanical And Elastic Properties Of Dgeba/Deta Nanocomposites, Dhritiman Talukdar, Sudipta Halder, Subhankar Das, M.S. Goyat, Abhishek Kumar Mishra

Journal of Metals, Materials and Minerals

Molecular dynamics simulations were performed to investigate the effect of  fullerenes (C60) on the thermal and mechanical properties of a cross-linked epoxy system composed of epoxy resin DGEBA and curing agent DETA. Hence, a comparative investigation was performed on the thermal and mechanical properties of DGEBA/DETA reinforced with 2.3 wt% C60 and neat epoxy systems. Properties such as glass transition temperature (GTT), coefficients of thermal expansion (CTE), and elastic properties at different cross-linking densities. Simulation results indicated that the GTT of the epoxy increased by about 25 K due to the presence of C60. The effect of C60 on the …

The Correlation Between Phase Formation And The Structure Of The Pellets With The Fungal Immobilization Study As A Commercial Substrate Culture/Planting Material, Rattiphorn Sumang, Rampai Kodsueb, Narathip Vitayakorn, Ruangwut Chutima

Journal of Metals, Materials and Minerals

Calcined clay pellets are popular planting material for those who love to grow plants in pots. The calcined clay pellets consist of clay (C), phosphate rock (PR), and rice husk ash (RHA). [(1-x)(50C–50PR)-xRHA], x(RHA) = 0, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, and 0.65 wt% were prepared by a conventional solid-state reaction method. The samples were made into a spherical shape with a diameter of 10 mm and fired at 600℃ to 1000℃. The effect of x contents on phase formation, microstructure, and chemical properties of [(1-x)(50C–50PR)-xRHA] was studied. X-ray diffraction revealed the typical assemblages with quartz, illite, …

Multi-Responsive Rotaxane With Tunable Fluorescence Under Azobenzene-Based Benzoxazine Structure, Sorapat Niyomsin, Suwabun Chirachanchai, Toshikazu Takata

Journal of Metals, Materials and Minerals

Rotaxanes are known for the mechanically interlocked molecules for decades. The present work demonstrates a method to prepare multi-responsive rotaxane by conjugating with a multi-responsive supramolecule. Benzoxazine dimers, N, N’-bis(3,5-dimethyl-2-hydroxybenzyl) methylamine derivatives, are good models because their simple chemistry. An azobenzene containing benzoxazine with remaining hydroxyl group for further conjugation with rotaxane was designed. The ring opening of rotaxane using fluorescent phenol provides benzoxazine dimer with metal ion responsive and fluorescent properties. Based on this concept, light responsive benzoxazine conjugated with rotaxane system shows light, metal ion and rotaxane shuttling responsiveness which can be followed by fluorescent signals. The present …

Synthesis And Antimicrobial Studies Of Nano-Copper Doped Carbon Substrates; Activated Carbon, Reduced Graphene Oxide, And Carbon Nanofiber, Songwuit Chanthee, Jenjira Jirasangthong, Channarong Asasvatesanupap, Malee Santikunaporn

Journal of Metals, Materials and Minerals

Copper oxides (CuxO) have received considerable attention as a result of their biological activity. Nanoparticles (NPs) of CuxO attached to different substrates exhibit a wide spectrum of antimicrobial activity against bacteria and viruses, with similar properties to silver. The antimicrobial activity of CuxO-NPs doped on distinctive carbon materials was investigated for three carbon substrates: apricot stone activated carbon (AAC), reduced graphene oxide (rGO) and carbon nanofiber (CNF). The CuxO-NPs (5 wt%) doped AAC and rGO substrates were prepared by impregnation of copper nitrate followed by a thermal treatment process, while a similar weight of CuxO-NPs doped CNF was fabricated by …

Research Progress Of Novel Zirconium Alloys With High Strength And Toughness, Na Zhang, Chaoqun Xia, Jiaqian Qin, Qiang Li, Xinyu Zhang, Riping Liu

Journal of Metals, Materials and Minerals

Atoms of zirconium (Zr) are often known as "first metals of the atomic age". Because of its low cross section for thermal neutron absorption, excellent corrosion resistance, and good mechanical and processing properties, it is extensively used in the nuclear industry. As the properties requirements of materials in chemical, medical and aerospace fields turn out to be higher, the application of Zr alloys in these non-nuclear fields has become more and more widespread due to their excellent properties. In addition to having a high melting point, Zr alloys also have a high specific strength and low thermal expansion coefficient. Therefore, …

Rice Husk Ash Utilization, Composition And Properties: A Brief Review, Vignesh Nayak Ullal, Shivaramu H. T., Aveen K. P.

Journal of Metals, Materials and Minerals

Asian countries rely massively on rice to feed and sustain its massive population. For long the staple food has provided nourishment to the masses and the classes. Rice is grown in large quantities in Asian countries. A by-product of its cultivation is its husk. The husk of the rice grain is mainly utilized as a fuel for the boilers in the rice mills. The uncontrolled burnt rice husk referred to as rice husk ash consists majorly of silica. silica is used in a wide variety of commercial and industrial applications. Use of rice husk ash in various products serves to …

Development Of Fexoy Particle Onto Bacterial Cellulose Network By Forced Hydrolysis And Its Electrical Conductivity, Prompong Khamwongsa, Poramed Wongjom, Andi Magattang Gafur Muchlisc, Chun Che Lin, Seranee Srisuk, Sarute Ummartyotin

Journal of Metals, Materials and Minerals

FexOy particle and bacterial cellulose composite sheet was successfully prepared by forced hydrolysis. The presence of Fe3+ ions in bacterial cellulose suspension significantly provided the positive charge due to electrostatic force as reported by Zeta potential. With the pH of 12 of bacterial cellulose suspension, particle was nucleated between bacterial cellulose networks. Fourier transform infrared exhibited Fe-O stretching. X-ray diffraction reported that the mixture of Fe2O3 and Fe3O4 was existed onto bacterial cellulose composite. Scanning electron microscope reported that FexOy particle was randomly distributed in bacterial cellulose network. Intensity of Fe was qualitatively observed by energy dispersive analysis. With the …

Preparation Of Bacterial Cellulose Film From Rotten Fruits For Mulching Film Application, Nattapong Pinpru, Varol Intasanta, Thitirat Charoonsuk, Supharada Khaisaat, Oubonwan Sawanakarn, Naratip Vittayakorn, Somsak Woramongkolchai

Journal of Metals, Materials and Minerals

This research aims to reduce production capital costs and added value to natural products. The bio-mulching film was prepared by bacterial cellulose (BC) “Acetobacter xylinum”, extracted from three rotten fruits, grape, coconut, and pineapple under standard tests in the laboratory. The analysis from the FTIR technique confirmed to cellulose molecular vibration of BC films. XRD pattern was matched to structure crystallinity of JCPDS standard file which possessed a high percentage of crystallinity. The SEM micrographs were also revealed the 3D nanofiber network structure. The absorption capability of BC films could highly hold water in its structure. In addition, …

Effect Of Pore Modifiers On Physical And Mechanical Properties Of High-Performance Cement Mortar, Kisun Chunti, Sureerat Polsilapa, Parinya Chakartnarodome, Passakorn Sonprasarn, Wichit Prakaypan, Edward A. Laitila

Journal of Metals, Materials and Minerals

Two different pore modifiers (PM), artificial pozzolan (AP) and modified aluminum salt (MA), were introduced into the composition of a High Performance Cement Mortar (HPCM). The chemical compositions of raw materials, ordinary Portland cement (OPC), sea sand, AP, and MA were identified by X-Ray Fluorescence spectrometry (XRF). The hydration kinetics resulting from each PM added to the HPCM was investigated by the relevance of hydration temperature. The mechanical properties such as compressive strength, dynamic modulus of rupture, and dynamic modulus of elasticity were measured as well as water absorption and density. Additionally, Scanning Electron Microscope (SEM) and Brunauer-Emmett-Teller (BET) were …

Green Acidic Catalyst From Cellulose Extracted From Sugarcane Bagasse Through Pretreatment By Electron Beam Irradiation And Subsequent Sulfonation For Sugar Production, Thitirat Rattanawongwiboon, Prim Chanklinhorm, Threeraphat Chutimasakul, Tanagorn Kwamman, Wilasinee Kingkam, Rattapon Khamlue, Sarute Ummartyotin

Journal of Metals, Materials and Minerals

The objective of this research is to prepare a green acidic catalyst from cellulose derived from sugarcane bagasse (SB). Initially, SB was pretreated by electron beam irradiation with a dose of 50 kGy to 200 kGy and subsequent acid hydrolysis to obtain cellulose. The cellulose derived from SB was carbonized at different temperatures for 4 h and then sulfonated with heating at 120°C under reflux. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) were used to confirm the successful preparation of acidic catalyst by irradiation pretreatment and subsequent sulfonation. The cellulose derived from irradiated SB at the lowest dose …

Synthesis And Characterization Of Hybrid Shell Microcapsules For Anti-Corrosion Ni-Co Coating, Hamed Sadabadi, Saeed Reza Allahkaram, Omid Ghader, Pradeep K. Rohatgi

Journal of Metals, Materials and Minerals

This paper presents the results of the study of microcapsules synthesized using a novel hybrid shell of polyureaformaldehyde/SiO2 (PUF/SiO2) and a core of linseed oil. The synthesis was accomplished by facial polymerization combined with sol-gel of TEOS, and urea-formaldehyde resin to form the hybrid shell under optimal process parameters. The microcapsules were embedded in a metal coating using the electrodeposition method. Microcapsules were characterized by scanning electron microscope (SEM, FE-SEM), energy-dispersive spectroscopy (EDS), particle size analyzer (PSA), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The experimental results indicated that the average size of capsules synthesized umder the optimum processing …