Digital Commons Network^™

Recruiting First Year Engineering Undergraduates, Eddie Conlon

Conference papers

This paper presents findings of three surveys conducted with first year students in the Faculty of Engineering in the Dublin Institute of Technology. It presents evidence on the reasons students study engineering, their sources of information on higher education programmes and the people who influence their decision to do engineering. It shows there are gaps in the students’ knowledge of their programmes and also between their expectations and their experience of their course. Some proposed areas of action are identified to increase both recruitment and retention. It is argued that projecting an image of engineering as a creative activity would …

Cognitive Engineering Research Methodology: A Proposed Study Of Visualization Analysis Techniques, Cristin M. Hall, Sonya A.H. Mcmullen, David L. Hall

Publications

The rapid development of new sensors and wide-band communications provides the capability to collect enormous amounts of data. An increasing challenge involves how to understand and interpret the data to yield knowledge about evolving situations or threats (e.g., of military situations, state of complex systems, etc.). New visualization tools and techniques are becoming available to support advanced visualization including three-dimensional, full immersion display environments and tools to support novel visualizations. Examples include network system display tools and evolving multi-sensory situation environments. Despite the emergence of such tools, there has been limited systematic test and evaluations to determine the efficacy of …

Multi-Axial Anisotropic Material Behavior Using A Collection Of Yield Surfaces To Model The Stress-Space Coupling Phenomena, Mirjana Marusic

Master's Theses and Capstones

In the 1989 Loma Prieta earthquake in the San Francisco-Bay area and also the 1994 Northridge earthquake in Southern California, several buildings experienced significant damage because of inadequate member design. The existing codes of practice used for the structural design approximate the effects of nonlinear material behavior. This work formulates a nonlinear anisotropic material model for systems subjected to biaxial loading conditions such that the true nature of material degradation can be identified. This would aide structural designers in being able to predict accurate cyclic deformations under large earthquake events. The proposed model investigates anisotropic material behavior under bi-axial loading …

Development And Characterization Of A Side Scan Sonar Towfish Stabilization Device, Rebecca Ann Conrad

Master's Theses and Capstones

The attitude of a side scan sonar towfish may introduce artifacts into the imagery when the towfish attitude exhibits a significant mean offset from horizontal and/or exhibits significant variations over time. The Smart Tail was designed by Boeing Australia for stabilizing the attitude of a Klein System 5000 towfish. This report describes the development and testing of a closed-loop controller for towfish attitude based on the Smart Tail's movable elevators. Transient and steady state response of the towfish pitch and roll motion were evaluated in a tow tank at speeds up to 6 knots. Mathematical modeling and simulation were used …

Computational Sciences: At The Intersection Of Science And Engineering - Case Study For Academic And Research Programs, Menas Kafatos, P. A. Becker, Z. Boybeyi

Mathematics, Physics, and Computer Science Faculty Articles and Research

No abstract provided.

Prototype Remote Vehicle Diagnostics For Police Cruisers, Sung Yun Kim

Master's Theses and Capstones

The goal of this thesis was to suggest ways of evaluating the health of police cruisers without bringing these cruisers into a repair facility. The prototype in-car application was developed. The hardware connection was made between the in-car network and the Project54 network. The software was built to collect, process, and send the vehicle information to the server via a telecommunication tool. The prototype in-car application was tested in simulation and on the road. After the development of the prototype in-car application, the radio traffic research gives a few recommended methods for sending the car health information in the New …

Analyte Rebinding Of Optimized Molecularly Imprinted Polymers In Water, Sayantan Roy

Master's Theses and Capstones

A series of non-covalent Molecularly Imprinted Polymers (MIPs) were prepared using caffeine and guanosine separately as template molecules. A wide variety of MIPs were prepared by varying a number of formulation parameters, including the template, recognition monomer, crosslinking agent and porogen types and concentrations. The specificity and selectivity of the MIPs were determined by rebinding studies in an aqueous medium using HPLC detection and the results were supported by gas adsorption experiments. Rebinding conditions, such as the pH and MIP concentration were also varied to determine the best conditions for analyte recognition. By using variety of polymerization conditions the particle …

A User-Friendly System To Measure Electromyographic Activity Of Dancers, Jianhua Zhou

Master's Theses and Capstones

A data acquisition system aided by virtual instrumentation was developed to measure electromyographic activity of the dancers. The system is composed of three main components: (1) Analog front-end with signal conditioning, (2) USB serial interface based A/D conversion, and (3) virtual instrumentation designed in LabView tools. The proposed system is able to accurately collect the magnitude of jump force and displayed the data using virtual instruments with alarm functions. The signal path is well-conditioned and processed, which makes the device suitable for feasibility studies for future research.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 22, Number 3, November 2005, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A ten page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Work In Progress: The Wsu Model For Engineering Mathematics Education, Nathan W. Klingbeil, Richard Mercer, Kuldip S. Rattan, Michael L. Raymer, David B. Reynolds

Kno.e.sis Publications

This paper summarizes progress to date on the WSU model for engineering mathematics education, an NSF funded curriculum reform initiative at Wright State University. The WSU model seeks to increase student retention, motivation and success in engineering through application-driven, just-in-time engineering math instruction. The WSU approach involves the development of a novel freshman-level engineering mathematics course EGR 101, as well as a large-scale restructuring of the engineering curriculum. By removing traditional math prerequisites and moving core engineering courses earlier in the program, the WSU model shifts the traditional emphasis on math prerequisite requirements to an emphasis on engineering motivation for …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 22, Number 2, October 2005, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A ten page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 22, Number 1, September 2005, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A ten page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

A Procedure For Imposing A Dichotomous Incidence Variable On The Weighting Of Items In A Dual Scaling Analysis Of Successive-Categories (Rating) Data, Adam Wyse

Theses

Demographic information collected on surveys is often of certain interest to those who use these surveys to measure customer satisfaction or do market research. This thesis presents a method for imposing a dichotomous incidence variable, possibly a demographic variable, on the weighting of items in a set of successive-categories (rating) data using dual scaling. The idea is to augment the matrix of rating data with the "criterion variable" containing the dichotomous information so that this item determines one of the initial solutions of the dual scaling analysis. In conjunction with the augmentation of the criterion item, the original data are …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 21, Number 9, June 2005, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A ten page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 20, Number 8, June 2004, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A ten page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

The Effect Of Reactor Configuration On No Conversion And Energy Consumption In Non-Thermal Plasma Parallel Tube Reactors, Morris D. Argyle, Gui-Bing Zhao, S.V.B. Janardhan Garikipati, Xudong Hu, Maciej Radosz

Faculty Publications

This work shows that the configuration of a pulsed corona discharge reactor strongly affects the rate of electron collision reactions. Experiments involving the decomposition of NO in N2 were performed in a reactor in which the number or parallel reactor tubes varied from 1 to 10 at a constant pressure of 147.6 kPa and ambient temperature. A previously developed lumped model of the reactions accurately predicted the effects of varying the initial concentrations of NO (from 240ppm to 593ppm) and gas residence time (from 1.93 to 742 s). With an increasing number of parallel reactor tubes, the rate of the …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 21, Number 8, May 2005, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 21, Number 7, April 2005, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A six page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Bs News

Building Services Engineering

No abstract provided.

Physics Alumni Newsletter Spring 2005, Terry Goforth

Physics Alumni Newsletter

Physics Alumni Newsletter

The Physics Alumni Newsletter is produced by the SWOSU Physics Department.

Our Engineering Physics students are recruited in fields such as electronics, aerospace, mechanical engineering, petroleum engineering and software engineering. Graduates also have careers in meteorology, architecture, education and more.

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 21, Number 6, March 2005, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Design And Simulation Of A Permanent-Magnet Electromagnetic Aircraft Launcher, Dean Patterson, Antonello Monti, Charles W. Brice, Roger A. Dougal, Robert O. Pettus, Srinivas Dhulipala, Dilip Chandra Kovuri, Tiziana Bertoncelli

Faculty Publications

This paper describes the basic design, refinement, and verification using finite-element analysis, and operational simulation using the Virtual Test Bed, of a linear machine for an electromagnetic aircraft launcher, for the aircraft carrier of the future. Choices of basic machine format and procedures for determining basic dimensions are presented. A detailed design for a permanent-magnet version is presented, and wound-field coil and induction machine versions are briefly discussed. The long armature-short field geometry is justified, and in particular the impact of this geometry on the scale of the power electronic drive system is examined.

Cryptographic And Combinatorial Properties Of Boolean Functions And S-Boxes., Kishan Chand Gupta Dr.

Doctoral Theses

In this thesis we study combinatorial aspects of Boolean functions and S-boxes with impor- tant cryptographic properties and construct new functions possesing such properties. These have possible applications in the design of private key (symmetric key) cryptosystems.Symmetric key cryptosystems are broadly divided into two classes.1. Stream Ciphers,2. Block Ciphers.Some recent proposals of stream ciphers are SNOW [37], SCREAM [52], TURING (98], MUGI (117), HBB (102], RABBIT (9), HELIX (38] and some proposals of block ciphers are DES, AES, RC6 [97), MARS (12], SERPENT (6], TWOFISH (104].In stream cipher cryptography a pseudorandom sequence of bits of length cqual to the message …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 21, Number 5, February 2005, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

A six page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

On Some Generalized Transforms For Signal Decomposition And Reconstruction., Yumnam Singh Dr.

Doctoral Theses

In this thesis, we propose two new subband transforms entitled ISITRA and YKSK transforms and their possible applications in image compression and encryption. Both these transforms are developed based on a common model of multiplication known as Bino’s model of multiplication. ISITRA is a convolution based transforms i.e., that both forward and inverse transform of ISITRA is based on convolution as in DWT or 2-channel filter bank. However, it is much more general than the existing DWT or 2-channel filter bank scheme in the sense that it we can get different kinds of filters in addition to the filters specified …

Why Are There Fewer Women In Engineering?, Sue Ellen Haupt

ADVANCE Library Collection

This paper attempts to explain the paucity of women in engineering. While the percentage of women entering engineering and science careers has been increasing, the number at higher ranks has not increased as quickly, after considering the appropriate time lag. The differences in tenure rate due to gender alone were statistically insignificant. Instead, these were attributed to the fact that women who are married or have children are less successful than are men with matching characteristics. One solution proposed is to recognize that priorities might be different at differing stages of family life. It is also important to encourage more …

National Center For Engineering And Technology Education, C. Hailey, T. Erekson, Kurt Henry Becker, M. Thomas

Engineering Education Faculty Publications

The article reports that the overall impact of the National Center for Engineering and Technology Education (NCETE) is to strengthen the nation's capacity to deliver effective engineering and technology education in the K-12 schools. Further, it informs that the National Science Foundation established the Centers for Learning and Teaching (CLT) program to address needs in the science, technology, engineering, and mathematics (STEM) workforce. The CLT program has three goals, based upon stated national needs. First, CLT are expected to renew and diversify the cadre of national leaders in STEM education. The CLT includes partners with strengths in engineering and in …

Women: Support Factors And Persistence In Engineering, John R. Duncan, Yong Zeng

Reports of Center Studies

Limited information is available regarding the factors that promote persistence by women in engineering programs. Stated simply, the problem is that the number of women engineers continues to fall short in comparison to the gender ratio of women to men in the population in the U.S. (BEST, 2002) and worldwide (Hersh, 2000). More women engineers are needed in general and in proportion to male engineers. This study addressed two questions. (1) What are the factors that support women in engineering? and (2) What are the factors that attract women to and help them to persist in a career in engineering? …

National Center For Engineering And Technology Education, Christine Hailey, Thomas Erekson, Kurt Becker, Maurice Thomas

Publications

The article reports that the overall impact of the National Center for Engineering and Technology Education (NCETE) is to strengthen the nation's capacity to deliver effective engineering and technology education in the K-12 schools. Further, it informs that the National Science Foundation established the Centers for Learning and Teaching (CLT) program to address needs in the science, technology, engineering, and mathematics (STEM) workforce. The CLT program has three goals, based upon stated national needs. First, CLT are expected to renew and diversify the cadre of national leaders in STEM education. The CLT includes partners with strengths in engineering and in …

Proposed Modifications To Engineering Design Guidelines Related To Resistivity Measurements And Spacecraft Charging, John R. Dennison, Prasanna Swaminathan, Randy Jost, Jerilyn Brunson, Nelson W. Green, A. Robb Frederickson

All Physics Faculty Publications

A key parameter in modeling differential spacecraft charging is the resistivity of insulating materials. This parameter determines how charge will accumulate and redistribute across the spacecraft, as well as the time scale for charge transport and dissipation. Existing spacecraft charging guidelines recommend use of tests and imported resistivity data from handbooks that are based principally upon ASTM methods that are more applicable to classical ground conditions and designed for problems associated with power loss through the dielectric, than for how long charge can be stored on an insulator. These data have been found to underestimate charging effects by one to …