Digital Commons Network^™

Nash Equilibrium Strategies For Multicluster Pursuit–Evasion Game With Disturbances: A Prescribed-Time Convergence Approach, Lei Xue, Xian Yu, Yongbao Wu, Jian Liu, Changyin Sun, D. C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

This article investigates the problem of prescribed-time Nash equilibrium (NE) seeking for a multicluster pursuit–evasion game (PEG) subject to external disturbances. To mitigate the impact of disturbances and reach the NE within a user-defined prescribed time, a prescribed-time disturbance observer (PTDO) is devised to estimate and compensate for them. Based on this observation, a novel control algorithm is developed, which facilitates collaboration among multiple pursuers to capture multiple evaders within the prescribed time. It is theoretically demonstrated that the designed algorithm ensures prescribed-time convergence to the NE of the multicluster PEG with disturbances. Finally, numerical simulations are conducted to verify …

Real-Time Multiregional Market-To-Market Congestion Management Through Exchange Of Relief Cost Curve, Haotian Chen, Yonghong Chen, Jose Daniel Lara, Jarrad Wright, Matthew Bossart, Sebastian De Jesus Machado, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

This paper introduces a novel method for multiregional market-to-market (M2M) coordinated congestion management. It identifies shortcomings in existing M2M approaches, where Regional Transmission Organizations (RTOs) exchange shadow prices and relief requests to optimize congestion relief allocations across interconnected regions. Two methods are proposed to enhance flow and price convergence. The first method proposes that both Regional Transmission Organizations (RTOs) use state-estimator flows directly to determine relief requirements, eliminating delays and potential oscillations caused by using market flows calculated from the prior period under existing M2M approach. The second method involves exchanging transmission relief cost curves, enabling each RTOs to integrate …

Transformer-Customer Relationship Identification Based On Load-Switching Fluctuation Characteristics Considering Same-Feeder-Adjacent-Transformer Condition, Yanan Zhang, Gan Zhou, Yuyuan Liu, Wei Gu, Yanjun Feng, Yujue Wang, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Accurately identifying the connectivity between transformers and downstream three-phase customers in low-voltage distribution networks is challenging, because voltage curves of different phases and nearby nodes can be weakly distinguishable, especially when adjacent transformers on the same feeder serve geographically close customers with highly similar voltage curves. This paper proposes a novel method based on load-switching fluctuation characteristics recorded by smart meters. By extracting localized current and voltage fluctuations and establishing correlation matching, the method overcomes the limited discriminability using steady-state measurements. The method operates in two stages: first, switching-induced fluctuation characteristics are extracted and matched to cluster customers by the …

Deep Learning Based High-Resolution Electromagnetic Inversion Imaging Using Deep Convolutional Double-Module Structure, He Ming Yao, Shiji Song, Lijun Jiang, Michael Ng

Electrical and Computer Engineering Faculty Research & Creative Works

In this paper, a novel deep learning (DL) approach has been proposed to realize high-resolution electromagnetic (EM) inversion imaging. The newly proposed approach is based on the deep convolutional double-module structure (DCDMS), consisting of the pixel-interpolating module and the corresponding quality-improving module. While the pixel-interpolating module roughly increases the 'resolution' of the initial input, the following quality-improving module realizes quantitative EM imaging in high resolution. The input of the proposed DCDMS adopts the mixed input scheme, consisting of the received EM scattered field and the initial reconstruction in much low resolution computed from Gauss-Newton method. The output of the proposed …

Enhancing Explainable Ai For Medical Imaging: Improved Lime Interpretation With Influence Mapping, Abiha Tahsin Chowdhury, Dhanush Bavisetti, Daniel B. Hier, Rahul Dubey, Tayo Obafemi-Ajayi

Electrical and Computer Engineering Faculty Research & Creative Works

The integration of artificial intelligence (AI) into medical imaging is progressing rapidly. It is essential for these AI tools to be transparent, interpretable, and explainable to gain the trust of clinicians and regulators. Current state-of-the-art explainable AI (XAI) techniques in imaging includes Local Interpretable Model-Agnostic Explanations (LIME), Shapley Additive Explanations (SHAP), and Gradient-weighted Class Activation Mapping (Grad-CAM). Recent studies have shown that LIME often suffers from inconsistency and unreliability which limits their utility in sensitive fields like medical imaging. This paper proposes Influence Map based Explanation (IME), an enhanced variant of the original LIME framework, that aggregates multiple runs to …

Event-Based Predefined-Time Synchronization For Complex Networks With Deception Attacks: An Asynchronously Intermittent Strategy, Lei Xue, Jiong Yu, Haoyu Zhou, Yongbao Wu, Jian Liu, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

This article studies the practical predefined-time synchronization (PPTS) for complex networks (CNs) under deception attacks based on the asynchronously intermittent event-triggered control (AIE-TC). Notably, AIE-TC effectively integrates the advantages of asynchronously intermittent control (AIC) and event-triggered control, where AIC provides each subsystem node with independent control and rest intervals. Besides, all synchronization errors of the CNs converge to an adjustable neighborhood within the predefined time by designing a bounded time-varying function into the controller. Moreover, this article considers that the transmission network is subjected to stochastic deception attacks modeled by a Markov process, which captures the state-driven dynamic transition characteristics …

Effect Of Sample Properties On Short-Circuited Waveguide Measurements For Materials Characterization, Alexander Hook, Jared Sinkey, Kristen M. Donnell

Electrical and Computer Engineering Faculty Research & Creative Works

Microwave materials characterization measurements can be performed using a number of well-established approaches. One such approach, the filled transmission line approach featuring a short-circuited rectangular waveguide (SC-RWG) sample holder, is known to have sample placement restrictions related to measurement viability. This work focuses on this approach and addresses the measurement restrictions within the context of sample length and dielectric properties. The complex reflection properties, S11, of a sample placed in a SC-RWG sample holder are studied to quantitively define when a sample must be offset from the SC-end. The impact of the sample holder is also studied from a measurement …

Multiphysics Modeling Of Melt Pool Dynamics And Powder Bed Stability In Lpbf Of Inconel 718 For A Circular Cavity, Nayan Pundhir, Oluwapelumi O. Adejumo, Kumbla Chandrashekhara, Joseph W. Newkirk, Heath Misak, Cesar Ortiz Rios

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser powder bed fusion (LPBF) is a metal additive manufacturing process in which a concentrated laser beam selectively melts successive powder layers to fabricate components. Final part quality is highly sensitive to process parameters such as hatch spacing, powder bed density, laser power, and scanning speed. In this study, a computational fluid dynamics model employing discrete element method has been developed in FLOW-3D to simulate LPBF of Inconel 718. The modeled powder bed incorporates particle size distribution data obtained from scanning electron microscopy and is evaluated for single-layer, single-track deposition over a circular cavity. The model captured melt pool dynamics …

Atomized Oxidative Polymerization As A 3d Printing Platform For Binder-Free, Bulk Conductive Polymer Architectures, Tazdik Patwary Plateau, Hiep Pham, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Translating the ultrahigh intrinsic conductivity of conjugated polymers into bulk 3D architectures remains a formidable challenge due to the fundamental dichotomy between rheological printability and electronic purity. Existing strategies necessitate a compromise: solution-processing requires insulating binders that degrade charge transport, while binder-free vapor-phase polymerization (VPP) is kinetically confined to surface-limited thin films by diffusion constraints. Here, we introduce atomized oxidative polymerization (AOP), a manufacturing paradigm that overcomes these kinetic barriers via active, layer-by-layer monomer atomization. This approach ensures stoichiometric reaction conditions throughout the printed volume, driving a structural transition toward highly conductive quinoid-dominant chains with enhanced π-π stacking. The resulting …

2-Point Focused Laser Differential Interferometry Measurements Of A Parallel Jet In Supersonic Flow, Joshua Gary, Joseph Villarreal, Davide Vigano

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Turbulence in compressible flows plays a central role in applications such as air-fuel mixing in supersonic combustors and is significantly more complex than incompressible turbulence due to the presence of fluctuating thermodynamic quantities. As such, models like the Strong Reynolds Analogy (SRA) are used to relate these quantities. However, SRA validity has been examined primarily in boundary-layer flows. In this work, a newly developed Two-Point Focused Laser Differential Interferometry (2-FLDI) system is implemented in a two-dimensional parallel supersonic jet. The diagnostic is described in detail, including optical alignment procedures, calibration methods, and data analysis techniques. Measurements acquired at multiple streamwise …

Design, Construction, And Initial Testing Of A Oxy-Acetylene Testing Facility, Blake Bowman, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Thermal Protection Systems (TPS) are critical for atmospheric re-entry and hypersonic flight vehicles, yet ground-based evaluation of TPS materials remains challenging due to the cost, complexity, and limited availability of large arc-jet and inductively coupled plasma (ICP) facilities. Oxy-acetylene testing provides a low-cost and accessible alternative for preliminary material screening, sensor development, and fundamental studies of material response under high heat-flux conditions. This paper presents the design, construction, and initial validation of the High-Enthalpy Acetylene Testing (HEAT) facility at Missouri University of Science and Technology. The facility incorporates a modular experimental architecture, independently controlled oxygen and acetylene mass-flow systems, and …

Supersonic Wind Tunnel Free Stream Turbulence Characterization Using 2-Point Focused Laser Differential Interferometry, Joseph Villarreal, Joshua Gary, Davide Vigano

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Non-intrusive laser-based diagnostics, such as Two-Point Focused Laser Differential Interfer-ometry (2-FLDI), play a crucial role in modern aerodynamic research by enabling simultaneous measurements of density and velocity in compressible flows. A 2-FLDI system has been developed and implemented for the Missouri S&T Supersonic Wind Tunnel to characterize free stream turbulence fluctuations and free stream convective velocity. Design choices that enabled the 2-FLDI to overcome low turbulence to measure free stream velocity are detailed. The free stream velocity measurements are validated against previous particle image velocimetry data, showing good agreement. Analysis of normalized velocities and density-based turbulence intensities found that the …

Corrigendum To “3d Semi-Analytical Thermo-Elasto-Plastic Model For Additive Manufacturing”(Additive Manufacturing, (2026), 127, C, (105308), (S2214860426002344), 10.1016/J.Addma.2026.105308), Tao Liu, Ming C. Leu, Edward C. Kinzel, Chinedum Okwudire

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The author regret about the correction in the Equation B(1) in original article. The corrected version of the Equation B(1) is given below,(1.1)∂uxxx,ξ∂x=116πμ1−ν4ν−1x−ξxR3−3x−ξx3R5−8ν−5x−ξxR13+34ν−3x−ξx3R15−18x−ξxzξzR15+30x−ξx3zξzR17−12ν−12ν−1x−ξxR1R1+z+ξz2+4ν−12ν−1x−ξx3R13R1+z+ξz2+8ν−12ν−1x−ξx3R12R1+z+ξz3 The authors would like to apologise for any inconvenience caused. DOI of original article: < 10.1016/j.addma.2026.105308>

Management And Nutrition Factors That Impact Broiler Breeder Fertility, Jeanna Wilson

Proceedings of the Arkansas Nutrition Conference

This article addresses the recent decline in broiler breeder hatchability.  Both managerial and nutritional solutions for mitigating the decline in hatchability are discussed.

Rethinking Macro And Micro Mineral Formulation In Modern Broilers, K. M. Venter, A. Herbst, P. W. Plumstead

Proceedings of the Arkansas Nutrition Conference

These proceedings discuss factors that affects calcium, phosphorus, zinc, and copper availability in poultry diets. Furthermore, the role of phytate and phytase on availability of the nutrients and their dietary requirements is investigated.

Investigating Food-Related Behaviors In Smith-Magenis Syndrome: Tailoring A Questionnaire For A Rare Disease, Citrine Elatrash, Theresa A Wilson, Alexis C Wood, Sarah H Elsea, Stephanie Sisley

Faculty, Staff and Students Publications

Purpose: Accurate measurement is essential for tracking changes in clinical outcomes. Individuals with Smith-Magenis syndrome (SMS) exhibit challenging and unique food-related behaviors. We sought to determine the best tool to capture their unique food-related behaviors.

Methods: We conducted focus groups with caregivers of individuals with SMS to evaluate two commonly used questionnaires for food-related behaviors- the Food Related Problems Questionnaire (FRPQ) and the Hyperphagia Questionnaire for Clinical Trials (HQ-CT). Based on caregiver input and clinical expertise, we adapted these existing measures into a new tool: the SMS-FRPQ. We then validated this instrument for internal consistency and concurrent validity using online …

[Abstract For] Bond Pricing Mechanics Beyond Yield-To-Maturity Based Calculations, Maura Alexander, Tom Arnold, Xiu (Summer) Liu

Finance Faculty Publications

Three methods for pricing bonds are presented: using a constant yield to maturity, using the yield curve with discount factors, and using implied forward rates from the yield curve with backward induction.  By moving beyond the first method, more dynamic duration and convexity analyses emerge.  Further, logical connections and extensions are made in regard to pricing bonds with embedded options, the calculation of a swap rate, and the “bond bootstrapping” process for building a yield curve.

Problems And Possibilities Of Namelessness In Late Antiquity And The Early Middle Ages, Jamie Wood, Hope Williard, Máirín Maccarron, Julia Hillner, James R. Burns

Medieval People

No abstract provided.