Digital Commons Network^™

Tools Used To Measure Fear Avoidance Behaviour In The Management Of Mild Traumatic Brain Injury (Concussion), Liam Sherwood

Theses: Doctorates and Masters

Concussion can present challenges with respect to diagnosis and management. Fear avoidance behaviour and beliefs may be perpetuating factors in the clinical course of concussion. Understanding which patients may adopt such behaviours and beliefs can offer important information to allow tailoring of clinical management and implementing strategies to minimise the risk of progression to persisting post-concussion symptoms.

In this thesis, I:

-       systematically reviewed the current measurement tools used to assess fear avoidance behaviours and beliefs associated with concussion;

-       explored the experience of clinicians, researchers and people with lived experience of concussion in relation to fear avoidance behaviours;

- …

Emotional Coding In Wolfgang Amadeus Mozart’S Music: The Influence Of Text-Driven Musical Patterns, Antonio Toppi

Theses: Doctorates and Masters

This thesis investigates the phenomenon of emotional coding in the music of Wolfgang Amadeus Mozart (1756–1791), with particular attention to the ways in which text-driven musical patterns influence both vocal and instrumental works. The study draws on 18th-century theories of key characteristics, musical-rhetorical figures, and topoi, compositional devices that carried emotional implications for contemporary listeners. These codes are first examined in two of Mozart’s operas, Le Nozze di Figaro (KV492) and Don Giovanni (KV527), where the setting of text to music provides a framework for associating compositional choices with emotion. Findings from the analyses are then applied to three contemporaneous …

Multi-Level Energy Optimization For Connected And Automated Vehicles: From Cooperative Multi-Vehicle Control To Individual Powertrain Management, Pruthwiraj Santhosh

Dissertations, Master's Theses and Master's Reports

The transportation sector currently accounts for nearly 30% of global energy consumption, necessitating urgent advancements in vehicle efficiency to meet Net Zero targets. Leveraging connectivity and automation, this dissertation proposes and validates methodologies to reduce the energy consumption of light-duty vehicles at both fleet and individual levels.

First, a validation framework is developed to bridge the “simulation-to-real world” gap in Cooperative Automated Vehicle (CAV) research. Moving beyond virtual simulations, the study establishes a methodology for physically validating centralized control architectures via a custom Cellular V2X network. By synchronizing vehicle-powertrain models with physical test vehicles, the framework successfully orchestrates complex arterial …

Design, Syntheses And Biological Applications Of Fluorescent Probes For Nad(P)H, Hsa And Cellular Microenvironment Sensing, Adenike M. Olowolagba

Dissertations, Master's Theses and Master's Reports

Fluorescent probes have emerged as powerful tools for investigating complex biological processes due to their high sensitivity, selectivity, and capability for real-time, non-invasive imaging. In particular, the detection of key biomolecules such as NAD(P)H, viscosity-related parameters, human serum albumin (HSA), and pH is essential for understanding cellular metabolism, redox homeostasis, and disease progression. In Chapter 2, three coumarin-based fluorescent probes (A–C) were designed, synthesized, and characterized for monitoring NAD(P)H levels in living cells. Probes A and B feature coumarin–cyanine hybrid structures linked via vinyl and thiophene bridges to 3-quinolinium acceptors, respectively, while probe C incorporates a dicyano moiety to replace …

Modular Synthesis Of Conjugated Aromatic Systems Via Palladium-Catalyzed Cross-Coupling Reactions, Joden Russell Robinson

Dissertations, Master's Theses and Master's Reports

This thesis describes the development of a modular synthetic route to extended conjugated aromatic systems through iterative palladium-catalyzed Sonogashira crosscoupling reactions. The work was motivated by the challenge of preparing a discrete conjugated molecule in a controlled manner. The synthetic strategy used complementary protected alkyne functionalities that could be selectively activated. This enabled sequential deprotection and coupling reactions to predictably extend the molecular scaffold. Using this approach, a series of conjugated intermediates was prepared and exponentially extended. Spectroscopic characterization by NMR and mass spectrometry supported the structures of the isolated products and the success of the iterative elongation strategy. Overall, …

Report On A Gpr Survey Of The Copper Harbor Cemetery, Copper Harbor, Michigan, Grace Griffin

Dissertations, Master's Theses and Master's Reports

The Copper Harbor Cemetery in Grant Township, Michigan, is one of the oldest settler cemeteries in the Keweenaw, with the earliest burial dating back to 1853. The cemetery is also still used by the community today. However, consistent burial records have not been maintained throughout the cemetery's entire history, leading to some doubt about which areas of the cemetery can be opened for new burials and where excavation should be avoided. For this reason, Grant Township commissioned a ground penetrating radar (GPR) survey of the cemetery, primarily to locate anomalies indicating possible unmarked graves and possible buried headstones. The survey …

Minimizing Snow Loss On Fixed Tilt Solar Pv Installations Through Frame Material Selection And Installation Layout, David B. Wallis

Dissertations, Master's Theses and Master's Reports

This thesis investigates the effects of frame material selection, module orientation and module gaps on photovoltaic energy production in a snowy environment. These factors are easily implemented in new PV installations at minimal or no extra cost. These experiments are installed as fixed tilt arrays at 35° with DC current, DC voltage, and meteorological monitoring. The frame material and module gap experiments both produced actionable results. In the frame material experiment, consistent event level energy production gains resulted in seasonal production gains favoring aluminum framed modules. In the module gap experiment energy gains are independent of atmospheric conditions. The orientation …

Aqueous Iron Electrowinning: From Electrolyte Engineering To The Unexplored Potential Of Acetate Systems, Chodwell N. Verenga

Dissertations, Master's Theses and Master's Reports

Iron electrowinning and electrodeposition sit at the intersection of classical metallurgy and developing sustainable manufacturing. With the iron and steel industry responsible for 7 - 9% of global CO₂ emissions, low-temperature electrochemical pathways for iron production have garnered significant research interest. This review examines the fundamental electrochemical principles governing iron deposition, the thermodynamic constraints imposed by the iron-water system, and the kinetic challenges posed by the parasitic hydrogen evolution reaction (HER). The three key electrolyte systems are objectively evaluated: acidic sulfate and chloride electrolytes, alkaline suspension electrolytes and water-in-salt electrolytes. Their operating parameters, faradaic efficiencies, energy consumption and deposit characteristics …

First-Principles And Thermodynamic Modeling Of Hydrogen Storage In Mxenes, Yi Zhi Chu

Dissertations, Master's Theses and Master's Reports

Hydrogen storage is a critical component of the emerging hydrogen economy, playing a central role in enabling the global transition from fossil fuels to a sustainable, green energy system. With advances in materials research, increasing attention has been directed toward the development of promising hydrogen storage materials. Due to their diverse and advantageous physicochemical properties, MXenes have attracted significant interest in this regard. A fundamental understanding of the hydrogen interactions with the MXenes structure is crucial for explaining and predicting their hydrogen storage performance. In this work, first-principles density functional theory (DFT) combined with a revised thermodynamic model is employed …

Designing With Foresight: Premortem And Human-Centered Evaluation Of Emerging Technologies, Anusha Kannan

Dissertations, Master's Theses and Master's Reports

Artificial intelligence is increasingly embedded in safety-critical systems, including transportation, where people must make fast decisions under uncertainty and high risk. As AI takes on a larger role in supporting human judgment, researchers and designers must evaluate more than just its technical performance, they must ask whether people can understand the system and use it effectively in high-risk settings.

This dissertation presents two distinct evaluation methodologies. First, the Human-Centered Evaluation, examines how intelligent in-vehicle alert systems influence driver decision behavior across two experiments. In Experiment 1 (n=24) and Experiment 2 (n=26), participants completed a driving simulator study in which our …

An Investigation On Downwind Impacts Of The Keweenaw Peninsula On Lake-Effect Snow Events, Thomas M. Pavell

Dissertations, Master's Theses and Master's Reports

Lake-effect snow (LES) produces copious amounts of snow across the Great Lakes region. While mechanisms and impacts are well-understood, they remain difficult to observe and study over Lake Superior and the Upper Peninsula of Michigan due to a large gap in radar coverage and sparse in-situ measurements. The goal of this project aimed to characterize variables present across Lake Superior and counties on and downstream of the Keweenaw Peninsula that contribute to the formation and evolution of lake-effect snowbands. Nine different lake-effect snow events were analyzed in this project, identifying structures and features resulting from upstream passage over the Keweenaw …

Correlation Of Mwd Parameters And Soil Properties In Nebraska With Geospatial Visualization Of Borehole Data, Michael N. Erzuah

Dissertations, Master's Theses and Master's Reports

One of the techniques used for recording a drilling system in terms of its mechanical response is Measurement While Drilling (MWD). A combination of recorded MWD parameters can be used to form compound parameters by utilizing different physics-based equations. Several engineering and index properties of the subsurface material can be correlated using these combined parameters for site characterization. In this study, we investigated the outcome of correlations between different compound parameters and SPT-N values using MWD data from four different boreholes in the state of Nebraska, USA drilled using tricone bits and mud rotary method. An interactive web map was …

Experimental Rate Feedback Control Of A Model-Scale Hourglass-Shaped Heaving Point Absorber, James R. Halverson

Dissertations, Master's Theses and Master's Reports

Buoy geometry greatly affects a point absorber wave energy converter's dynamic response to waves. Finding the optimal buoy shape and control method remains an open research area focused on maximizing the conversion of wave kinetic energy into electricity. This work presents an experimental comparison of closed-loop energy extraction between a cylindrical and a truncated cone buoy, both with the same submerged volume, across various wave frequencies and amplitudes. To ensure a fair comparison, the optimal rate feedback gain is calculated for each buoy at each wave condition. Multiple metrics, including power output, capture width, and actuator force, are used to …

Numerical And Experimental Evaluation Of A Simple, Low-Energy Lunar Volatile Separation Technology, Eleanor L. Zimmermann

Dissertations, Master's Theses and Master's Reports

In-situ resource utilization (ISRU) is the practice of finding, extracting, and using the local resources found on extraterrestrial bodies, such as the Moon and Mars. ISRU enables in-situ production of mission consumables—such as rocket fuel and potable water—which will be critical for establishing a sustainable human presence on the Moon, a goal NASA intends to accomplish by 2028 with the Artemis missions. The separation and liquefaction of locally extracted volatiles—such as water, CO₂, and Methane—is an essential component in lunar surface sustainability, but there are very few technologies being developed for this purpose. This report introduces the Radiative …

Nondestructive Evaluation Of Additively Manufactured Parts Using Resonant Inspection And Frequency Domain-Based Correlation Criteria, Gita Deonarain

Dissertations, Master's Theses and Master's Reports

Additive manufacturing (AM) enables the production of highly customized and geometrically complex components; however, these parts remain susceptible to a wide range of defect types and severities. The combination of complex geometries and distributed defects presents a significant challenge for post-process nondestructive evaluation (NDE). Conventional inspection techniques, such as computed tomography and ultrasonic testing, are often limited by geometry, material, accessibility, and cost, while in situ monitoring is not yet sufficiently mature to replace post-process inspection.

This dissertation establishes the Frequency Domain Assurance Criterion (FDAC) as a quantitative, vibration-based framework for defect detection in AM components. FDAC captures spatial–spectral correlations …

The Excess Path Length Distribution: A Stochastic Model For Sample-Based Path Planners, Chaz B. Cornwall

Dissertations, Master's Theses and Master's Reports

Through random sampling, sample-based path planners enable autonomous agents to quickly find paths without human intervention. However, due to the paths' randomness, sample-based path planners currently require additional verification, partially nullifying agents' ability to act autonomously. I set out to characterize this uncertainty so humans know what to expect from these path planners and know how to alter the path planner to desired specifications. To ensure the results are theoretical as well as practical, I first create a stochastic model of path length uncertainty using the trade-off between sampling time and optimality. By leveraging this model, my proposed algorithm reduces …

Shm For Incipient Buckling Detection In Overloaded Structures Using Nonlinear System Identification Algorithms On Redundant Data Sets, Padmanabh Shridhar Desai

Dissertations, Master's Theses and Master's Reports

Structural health monitoring (SHM) detects and characterizes damage to predict failure, but failures such as buckling, which are not predicated on traditional damage modalities, are harder to detect. Direct load measurements are costly and difficult to implement (especially for dead loads) as they require copious numbers of sensors, which must be installed before loading is present. Vibration-based detection is a good alternative because it can infer global structural characteristics with relatively few sensors. This dissertation presents an SHM approach for detecting incipient buckling in structures under excessive loads based on non-linear models fit from measurements of small lateral vibrations due …

Modeling Determinants Of Significant Noncompliance In The U.S. Mining Sector: A Fixed Effects Logistic Regression Approach, Eli Johnson

Dissertations, Master's Theses and Master's Reports

This study examines environmental compliance behavior among mining facilities regulated under the U.S. Clean Water Act (CWA). Using a national quarterly panel of National Pollutant Discharge Elimination System (NPDES)-permitted mining facilities, the analysis evaluates whether local socioeconomic and demographic indicators are associated with the likelihood that a facility enters significant noncompliance (SNC) status. Facility compliance histories are compiled from the U.S. Environmental Protection Agency’s Enforcement and Compliance History Online (ECHO) database and is merged with county- and state-level socioeconomic indicators and election data. A fixed-effects logistic regression model is used to account for time-invariant facility heterogeneity. The results suggest that …

Experimental Characterization Of Photonic Crystal Based Invisibility Cloak Under Tm-Polarized Microwaves, Muhammad Danyal

Dissertations, Master's Theses and Master's Reports

Electromagnetic invisibility cloaks guide waves around an object so that the transmitted wavefront remains undisturbed. Most experimental microwave cloaking studies have focused on transverse electric (TE) polarization due to established measurement techniques. In this thesis, the experimental realization and characterization of a dielectric photonic crystal cloak operating under transverse magnetic (TM) polarization are presented. A measurement system operating in the X-band was developed to map the electric field distribution of the transmitted waves. Cloaking performance was first evaluated qualitatively by comparing numerical and experimental field distributions, where restoration of a flat wavefront indicated effective cloaking. Quantitative evaluation was performed by …

Digital Technology And Women’S Health In Nigeria: A Feminist Sts Walkthrough Analysis Of Mdoc Digital Health, Edith Michael Ogbodo

Dissertations, Master's Theses and Master's Reports

This thesis critically examines how a Nigerian digital health platform, mDoc, represents and constructs women’s health. Drawing on Feminist Science and Technology Studies (STS) and Light et al.’s (2018) walkthrough method, the study interrogates the values, assumptions, and power relations embedded in mDoc’s design, language, and governance structures. The analysis reveals that mDoc, despite positioning itself as an equitable solution to Nigeria’s health crisis, reproduces and depoliticizes the structural inequalities it claims to address. Through its neoliberal emphasis on self-care, the individualization of structurally produced suffering, and the datafication of women’s bodies, the platform encodes gendered, colonial, and class-based assumptions …

Development And Calibration Of A 2-D Diesel Oxidation Catalyst Filter (Docf) Model With Spatially Varying Washcoats Using Spacims And Engine Loading Data, Thomas K. Price

Dissertations, Master's Theses and Master's Reports

Diesel engine exhaust contains regulated species, including carbon monoxide, hydrocarbons, nitrogen oxides, and particulate matter (PM). Meeting increasingly stringent emission standards typically requires multiple aftertreatment components, motivating the development of multifunctional devices that reduce system size, cost, and catalyst usage. Computational models are essential for guiding this design process; however, existing models primarily focus on single-function devices and rarely capture the behavior of multifunctional systems with multiple catalyst washcoats. This work presents a physics-based model of a wall-flow diesel oxidation catalyst filter (DOCF), a multifunctional device that integrates the roles of a diesel oxidation catalyst and a diesel particulate filter …

On The Vibrational Dynamics Of Wind Turbine Blades: The Oscillatory Response To Gust Pulses, And The Physical Mechanisms Behind Them, North A. Yates

Dissertations, Master's Theses and Master's Reports

An easily noticed trend in the utility-scale wind turbine industry is that the size of the machines has continued to increase over time. While this may have benefits in terms of increasing the power generation for a single turbine, a major drawback is the rate with which the weight of the turbine blades grow. To ensure these larger machines can be utilized, efforts are being put forth to create lighter blades. This may fix the weight issue, but brings on a new one; these lighter blades can also be more flexible than previously studied ones. It is, therefore, vitally important …

Computational And Ai Frameworks For Identifying Key Regulatory Genes And Their Target Genes In Plants And Humans, Md Khairul Islam

Dissertations, Master's Theses and Master's Reports

This dissertation presents computational and AI-driven frameworks for identifying key regulatory genes and their downstream targets across plant and human biological systems. Three studies address distinct challenges in genomic regulation using advanced machine learning and bioinformatics approaches.

The first study introduces DyGAF (Dynamic Gene Attention Focus), a dual-attention transformer framework that identifies and ranks disease-relevant biomarker genes by simultaneously modeling independent molecular responses and interdependent regulatory network behavior. Two attention models provide complementary perspectives on gene importance and are fused through a novel combination metric. Applied to COVID-19 nasopharyngeal swab profiles, the attention-weighted representations achieved 94.23% classification accuracy, high sensitivity, …

Exploring Fructose Mimetics As Chemotherapeutic Potentiators: Impact On Glut5-Mediated Cancer Cell Vulnerability, Vedant Buwa

Dissertations, Master's Theses and Master's Reports

Metabolic reprogramming toward increased sugar uptake is a hallmark of cancer, and fructose-specific uptake through the facilitative transporter GLUT5 is selectively upregulated in several adenocarcinomas, including breast and lung cancer. This dissertation develops and characterizes a panel of fluorescent fructose mimetics – the coumarin-based ManCou probes and the quinolinone-based ManQuin probes – as GLUT5-targeted reporters, cytotoxic effectors, and chemosensitization adjuvants, and establishes the boundaries within which each role holds.

The central experimental strategy pairs each GLUT5-targeted glycoconjugate with its sugar-free aglycone control, isolating transporter-mediated cytotoxicity from cytotoxicity intrinsic to the fluorophore itself. In luminal (MCF7) and triple-negative (MDA-MB-231) breast carcinoma, …

Machine Learning And Multi-Scale Optimization For Control And Energy Management In Connected And Automated Vehicle Propulsion Systems, Joshua D. Orlando

Dissertations, Master's Theses and Master's Reports

This dissertation presents a multi-scale optimization framework leveraging machine learning (ML) to enhance energy efficiency in connected and automated vehicle (CAV) propulsion systems. As transportation transitions toward hybridization and automation, the integration of vehicle-to-everything (V2X) connectivity and advanced control algorithms offers unprecedented opportunities for energy reduction. This research addresses three critical scales of vehicle energy management: multiple vehicle-level coordination, component-level powertrain dynamics, and real-time vehicle parameter estimation.

First, the research investigates the energy consumption characteristics of heterogeneous propulsion systems—ranging from internal combustion engines to battery electric vehicles across light- and heavy-duty sectors—on arterial roadways. Utilizing Particle Swarm Optimization (PSO) and …

Reading Between The Lines: Protected, But Not From Interpretation, Hooriya Habib

Dissertations, Master's Theses and Master's Reports

In the realm of television, audiences are interactive viewers who decode meaning based on their lived experiences. Given that each culture has its own set of cultural codes it uses as a lens to navigate life, meanings do not remain constant. This cultural media study breaks down three advertisements to study the effectiveness of these advertisements in relation to religious and cultural codes. Using Stuart Hall’s (1980) encoding/decoding model, an oppositional reading was employed to understand the disconnect that may be caused between an audience of rural Pakistani women and the producers. Objects of focus were nonverbal codes such as …

Design And Experimental Evaluation Of A Custom Vision-Guided Approach To 2d Part Localization For Industrial Robots, Faisal Ali

Dissertations, Master's Theses and Master's Reports

Vision-guided robots offer a clear advantage over teach-pendant programming for battery handling, where modern packs hold thousands of cells and teaching each position by hand does not scale. Commercial vision systems address this need, but their calibration, detection, and coordinate-conversion stages are closed to the user, making it hard to incorporate newer learning-based methods. This work presents a modular, custom-built vision-guided system using an Orbbec Gemini 435Le eye-in-hand camera, an NVIDIA Jetson Orin Nano, an Allen-Bradley Micro850 PLC, and a FANUC LR Mate 200iC, communicating over Modbus TCP and EtherNet/IP. A per-hole classification model resolves each known hole into a …

Physicochemical Characterization Of Small Extracellular Vesicles: Effects Of Immobilization, Isolation, And Disease State, Bianca M. Mercado Velez

Dissertations, Master's Theses and Master's Reports

Cancer treatments and survival outcomes have improved significantly in the last couple of decades, with survival rates increasing in the U.S. Despite improvements in treatment outcomes, early detection and treatment are crucial for improving cancer prognosis and survival rates. The standard cancer diagnostic procedure of tissue biopsy is highly invasive, leading to the further spread of cancer in some cases. Alternatively, the extraction of biofluids from cancer patients, also called a liquid biopsy, is increasingly popular because it is less invasive and more representative of the tumor microenvironment, which contains cancer cells, tumor genetic material, and extracellular vesicles, including small …

Study Of Bearing Capacity Testing And Soil Preparation Techniques In Lunar Highlands Simulant At Field Scale, Christi A. Lecaptain

Dissertations, Master's Theses and Master's Reports

Humanity seeks to return to the surface of the Moon with the advent of the Artemis missions. These endeavors plan to be the beginning of a new era as NASA and other space organizations seek to establish a lunar base. Ahead of any astronauts or mining infrastructure, the physical groundwork will need to be laid to support the arrival of rockets, boots, and rover wheels. As surfaces are prepared, they will need to be tested and verified to ensure the stability of any structures placed on top. Understanding the bearing capacity is vital to soil quality testing. A standard terrestrial …

Antenna-Based Sensors For Dielectric Characterization Of Materials, Hilary Scott Nkimbeng Cho

Dissertations, Master's Theses and Master's Reports

This research introduces antenna-based sensors for dielectric characterization aimed at overcoming the limitations of conventional microwave sensors. Although traditional microwave sensors are widely used for their noncontact operation, high sensitivity, and ability to penetrate various materials, they often face challenges such as large size and high-power consumption. To address these issues, antenna-based sensors are explored for their compactness, ease of fabrication, and flexible design adaptability across diverse sensing applications. An in-depth analysis of multiple antenna sensor configurations is conducted, followed by the design and development of high-performance sensing structures. A saw-tooth slot antenna sensor is developed for highly sensitive liquid …