Digital Commons Network^™

Synthesis Of Nickel Nanoparticles By Gamma Irradiation And Femtosecond Laser Ablation, V. M. Rao, Y. Han, H. Tsai, C. H.C. Giraldo, T. Akyurek

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Nickel nanoparticles were synthesized by (i) gamma irradiation of aqueous nickel chloride precursors and (ii) double scan femtosecond laser (FSL) ablation of a pure nickel foil in water. The nanoparticles produced by FSL ablation were further stabilized in acetone. Gamma radiolysis yielded nickel nanoparticles in the 2–22 nm range, with the average particle diameter governed by the total absorbed dose. Nickel nanoparticles produced by double scan FSL ablation were in the 2–17 nm range but less monodispersed than the nanoparticles produced via gamma radiolysis. FSL ablation proved to be superior in terms of yielding a higher number of smaller nanoparticles …

The Hidden Impact Of Workplace Incivility, Joahnna Everard Marquez, Maribeth Gale Lyon, Catherine De La Torre, Barbara Parker

Covenant Nurses Week 2026

No abstract provided.

Planetarity And Relation: Ecology As Method, Ashish Ghadiali

School of Art, Design and Architecture Theses

The List of Works submitted comprises research through film, text, exhibition, performance and policy engagement, developed during a three-year period from 2021 to 2024 in the site-specific location of Southwest England. This multi-modal and interdisciplinary practice is framed in response to the question of how art and cultural strategy can, in the contexts of climate breakdown and global racial inequity, be conceived of as agency for environmental justice. In this integrative summary, I present a theoretical framework where ecology, in response to conditions of environmental crisis, is understood not only as a subject of inquiry but also as method. In …

Feminism, Domestic Abuse And The Singer-Songwriter, Kathryn Ferguson

School of Art, Design and Architecture Theses

This project explores how feminism and domestic abuse can be articulatedthrough songwriting. Research in music therapy, sociology and popular musicincreasingly speaks to the value of songwriting as a tool for personal andcommunity empowerment, but there is space to actively use songwriting toexplore feminist issues independently of the traditional commercial context ofpopular music. Existing feminist music has been deemed as at its mostsuccessful when it is linked clearly to social change in our communities(Greene, 2017, p.8). Modern popular feminist songwriting has been criticised fornot going far enough in deconstructing systemic patterns of patriarchy (Tong,2024, p.9). Considering this, engaging with academic research …

Inked Mobilities: Tattoos As Embodied Visual Narratives Of Youth Migration Between Italy And Australia, Giulia Marchetti

Research outputs 2022 to 2026

This article examines tattoos as embodied visual narratives within a broader study on youth transnational mobility (2019-2023). Focusing on recent Italian migration to and from Australia, 13 tattoos were documented among the 36 participants, acquired shortly before departure, during the stay in Australia, or upon return to Italy. Methodologically, the article proposes tattoo-based interviews as a participatory visual method that mobilises permanently inscribed images as sites of visual elicitation, enabling forms of reflection and storytelling. Tattoos thus operate as relational spaces of dialogue, co-interpretation, and reflexive meaning-making between researcher and participants. Epistemologically, tattoos are approached as visual narratives through which …

Precarity On The Move: The Relative Economic Precarity Of Mobile Youth Moving To Australia, Lara Mckenzie, Anita Harris, Loretta Baldassar

Research outputs 2022 to 2026

Analyses of precarity often focus on how insecure employment, careers, finances, and geographies influence people’s lives for the worse, with young people understood as especially precarious in their economic stability and transitions to adulthood. This article analyses accounts of precarity amongst middling transnationally mobile youth, drawing from 24 semi-structured interviews incoming to Australia, and longitudinal survey data. We show that experiences of economic precarity are impacted by their access to work, government support, ability to access or sustain visas, and access to support from family and partners. By drawing on migration scholars’ observations that transnational mobility can be privileged and …

Inside Out: Improving Large Model Safety, Wei Zhao

Dissertations and Theses Collection (Open Access)

While Large Language Models (LLMs) and Multimodal Large Language Models (MLLMs) are at the frontier of current advancements in artificial intelligence, demonstrating remarkable capabilities across diverse applications, there are growing concerns about their reliability and security. LLMs remain vulnerable to adversarial attacks through carefully crafted prompts that circumvent safety mechanisms, while MLLMs face additional security challenges stemming from their multimodal nature. Despite considerable efforts in reinforcement learning from human feedback (RLHF) and supervised fine-tuning, existing safeguards have proven inadequate in addressing these critical vulnerabilities. This inadequacy stems from the fact that these models are inherently blackboxes that do not provide …

The Impact Of Corporate Mergers And Acquisitions On Performance From The Perspective Of Growth Pressure, Jiandong Wang

Dissertations and Theses Collection (Open Access)

Against the backdrop of economic volatility and intensified industry competition, firms generally face multidimensional growth pressures, including historical growth pressure, social growth pressure, and market competition pressure. Growth pressure is not only related to firms’ operational stability, but also profoundly influences their strategic choices, particularly merger and acquisition (M&A) behaviour.Grounded in performance feedback theory, this study constructs an integrated analytical framework encompassing growth pressure, M&A strategic decisions, and M&A performance, and systematically examines how different types of growth pressure affect firms’ M&A decisions, as well as how M&A performance varies across different firm characteristics and different types of M&A.

The …

Christianity As Coping Mechanisms For Migrants With Mental Health Challenges In Australia: Social Work Implications, Obed Adonteng-Kissi, Nnaemeka Meribe, Kathomi Gatwiri, Lillian Mwanri, Agness Tembo, Frank Darkwa Baffour, Edith N. Botchway-Commey, Aunty Kerrie Doyle, David Chisanga, Ahmed A. Moustafa, Uchechukwu Levi Osuagwu

Research outputs 2022 to 2026

Christian religion may be a powerful resource that can serve as a coping mechanism to resolve challenges and provide comfort to African migrants confronted with mental health challenges. We aimed to explore the coping strategies among African migrants in Australia. We undertook semi-structured interviews online with 11 participants with African backgrounds, comprising six mental health clinicians and five migrant service users living in Australia for at least the past 12 months. Literature exploring religious coping mechanisms, social support and acculturation was drawn on. The interviews were undertaken online via Teams, WhatsApp call, and zoom with participants whom we recruited through …

Delirium In The Acute Care Setting From The Families Perspective: A Scoping Review, Amber Mclean, Beverley Ewens, Amanda Towell-Barnard

Research outputs 2022 to 2026

Aim: To explore the existing literature on delirium within the acute care setting from the family members' perspective and summarise key findings. Design: A scoping review guided by Arksey and O'Malley's methodological framework and refined by the Joanna Briggs Institute. Review Methods: The Population, Concept, and Context framework recommended by the Joanna Briggs Institute's scoping review protocol identified the main concepts in the primary review question. The inclusion criteria focused on primary research studies from any chronological date that explored the family members' experience of delirium within the acute care setting. Following screening by two independent reviewers, data extraction was …

Music Learning And School-Aged Children’S And Adolescents’ Wellbeing: A Scoping Review, Jason Goopy, Stephanie L.R. Macarthur

Research outputs 2022 to 2026

There is compelling evidence that music can support young people’s wellbeing, particularly through music listening to and making. In this article we report a systematic review of music learning and wellbeing literature to offer a new perspective on learning music as a wellbeing strategy. In this review, we investigated (a) what definitions and theories of wellbeing have been used; (b) what methodologies have been employed, particularly measurement tools; (c) what learning contexts and participant demographics have been examined; and (d) what is known about music learning and the wellbeing of school-aged children and adolescents. This review was conducted using the …

Tourism Destination Mobile Applications: An Ai-Human Loop Analysis And Future Research Programme, Arghavan Hadinejad, Naser Pourazad, Lara Stocchi, Violetta Wilk

Research outputs 2022 to 2026

Despite the rise in destination mobile applications (apps) and their significance in the tourism sector, there remains a notable dearth of critical assessments of knowledge on the topic, which is necessary to guide future academic and industry endeavours. To bridge the gap, this research conducts a systematic review to synthesise scholarly knowledge on tourism destination mobile apps. The analysis reveals topical clusters including prototyping and scoping, consolidation, and forecasting and further technological advancements between 2009 and 2023. The existing scholarship is predominantly quantitative and atheoretical, with the Technology Acceptance Model being the most frequently applied framework. The findings reveal four …

Upconversion Photoluminescence In Wsse Alloy Monolayer Under Uniaxial Tensile Strain, Shrawan Roy, Jie Gao, Xiaodong Yang

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The optical responses of monolayer transition metal dichalcogenides (1L-TMDs) can be tuned effectively by using mechanical strain. In this work, the tuning of upconversion photoluminescence (UPL) emission in 1L-WSSe alloy by applying uniaxial tensile strain is investigated. When the uniaxial tensile strain is changed from 0 % to 1.02 %, the peak position of UPL emission has a redshift of around 25.6 nm, and the UPL intensity goes up with an exponential function of the applied strain as the upconversion energy difference is varied from −197 meV to −131 meV. The sublinear power dependence for UPL emission in 1L-WSSe alloy …

A Combined Tomographic Particle Image Velocimetry And Numerical Simulation Approach For Supersonic Wind Tunnel Calibration, Joshua Gary, Josiah Mcdermott, Kyle Worden, Serhat Hosder, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Supersonic wind tunnels remain essential tools for high-speed aerodynamics research, yet the characterization of their free-stream conditions remains technically challenging and lacks standardized criteria for defining "good" flow quality. While traditional calibration methods rely on intrusive probes, recent advances in optical diagnostics offer new opportunities for non-intrusive characterization. In this work, we demonstrate a novel use of Tomographic Particle Image Velocimetry (Tomo-PIV), combined with numerical simulations, as a methodology for supersonic wind tunnel calibration. The approach is applied to the recently upgraded Missouri S&T Supersonic Wind Tunnel, where Tomo-PIV measurements reveal uniform flow with low angularity and low turbulent noise …

Physics-Constrained Generative Adversarial Networks For Dimensionality Reduction In Optimization, Samuel Sisk, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft make a unique form of urban air mobility due to their low noise, zero emission, and precision control. To maximize efficiency, high-fidelity simulation-based multidisciplinary design optimization discovers the optimal balance among subsystems within an eVTOL. However, conventional multidisciplinary design optimization is computationally intensive due to excessive high-fidelity model evaluations. Moreover, complex nonlinear constraints deteriorate optimization efficiency and convergence. While surrogate models enable efficient design optimization, surrogate modeling suffers in large-scale applications and surrogate-based optimization still has to deal with nonlinear constraints. To address these challenges, the authors' previous work proposed physics-constrained generative adversarial …

Tomo-Piv Study Of Baseline Flow Structures Behind A Strut Injector, Josiah Mcdermott, Connor Bell, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Stabilizing combustion in scramjet engines is a formidable challenge due to the small-time scales afforded for air-fuel mixing. Numerous studies in this area have demonstrated the potential of strut-style platforms for fuel injection and mixing enhancement, which remains an active area of research. In the Aerodynamics Research Laboratory at Missouri S&T, a strut-style injector system has recently been installed. In this study, we characterize the baseline flow structures behind this platform absent fuel injection. The wake generated by a strut itself has an appreciable impact on the resulting air-fuel mixing, which motivates its characterization. In future studies, this characterization will …

Optimal Takeoff Trajectory Prediction Of Electric Drones Based On A Fully Automated Optimal Experimental Design Method, Jiachen Wang, Dheeraj Paramkusham, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft is attracting great interest as a viable solution to promote urban aerial mobility with promising flexibility as well as emission reductions. However, the low specific energy of the current battery is still a strong constraint on the range and endurance of eVTOL flights, especially considering the significant power demands during the takeoff process. Engineering design optimization permits promising solutions for the minimum takeoff energy consumption but can be computationally intensive due to iteratively evaluating simulation models. Surrogate-based design optimization is efficient but still relies on optimization iterations which prohibit real-time decision-making. To fill …

Impact Of Dispersed Crystalline Domains On Lithium-Ion Conductivity In Amorphous Li2.99ba0.005ocl Electrolytes, Emmanuel Olugbade, Junquan Ou, Leon Shaw, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Solid-state electrolytes promise safer, high-energy batteries, yet ionic transport is limited by structural heterogeneity and interfacial resistance. We combine hydrothermal synthesis and molecular dynamics (MD) to determine how dispersed crystallinity and interfacial orientation govern lithium-ion conduction in barium-doped anti-perovskite Li_2.99Ba_0.005OCl. Structural and thermal analyses identify a largely amorphous matrix with embedded nano crystallites, and MD captures the same short-range order and dispersion seen experimentally. Electrochemical impedance spectroscopy separates high amorphous-phase conductivity from a pellet-scale response dominated by interfacial limitations, consistent with direct-current polarization. Cyclic voltammetry indicates a broad electrochemical stability window. We quantify transport in crystalline …

Distributed Vibration Sensing For Identification Of Loose Connectors In Coaxial Data Transmission Lines, Saidanvar Esanjonovich Valiev, Anthony C. Okafor, Jeremiah J. Rittenhouse, Jie Huang, Daniel S. Stutts

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This study investigates the effect of vibration-induced loose connections on signal reflection (S11) for loose connection identification in aerospace coaxial cables using distributed sensing approach, which is effective in filtering the noise and identifying minor discontinuities. In this approach, a sliding gated window is applied to S11 signal, a fast Fourier transform is performed over the gated windows, cross-correlation is computed between the baseline and vibration-affected signals, and the standard deviation is mapped along the cable length. Sinewave signals from 9 kHz to 5 GHz were swept through cables with vibrating connectors under three conditions: fully tightened, loosened by 180°, …

Multiphysics Modeling Of Melt Pool Dynamics And Powder Bed Stability In Lpbf Of Inconel 718 For A Circular Cavity, Nayan Pundhir, Oluwapelumi O. Adejumo, Kumbla Chandrashekhara, Joseph W. Newkirk, Heath Misak, Cesar Ortiz Rios

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser powder bed fusion (LPBF) is a metal additive manufacturing process in which a concentrated laser beam selectively melts successive powder layers to fabricate components. Final part quality is highly sensitive to process parameters such as hatch spacing, powder bed density, laser power, and scanning speed. In this study, a computational fluid dynamics model employing discrete element method has been developed in FLOW-3D to simulate LPBF of Inconel 718. The modeled powder bed incorporates particle size distribution data obtained from scanning electron microscopy and is evaluated for single-layer, single-track deposition over a circular cavity. The model captured melt pool dynamics …

Atomized Oxidative Polymerization As A 3d Printing Platform For Binder-Free, Bulk Conductive Polymer Architectures, Tazdik Patwary Plateau, Hiep Pham, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Translating the ultrahigh intrinsic conductivity of conjugated polymers into bulk 3D architectures remains a formidable challenge due to the fundamental dichotomy between rheological printability and electronic purity. Existing strategies necessitate a compromise: solution-processing requires insulating binders that degrade charge transport, while binder-free vapor-phase polymerization (VPP) is kinetically confined to surface-limited thin films by diffusion constraints. Here, we introduce atomized oxidative polymerization (AOP), a manufacturing paradigm that overcomes these kinetic barriers via active, layer-by-layer monomer atomization. This approach ensures stoichiometric reaction conditions throughout the printed volume, driving a structural transition toward highly conductive quinoid-dominant chains with enhanced π-π stacking. The resulting …

Performance Evaluation Of Thick Carbon Fiber-Reinforced Laminates Manufactured Using Six-Magnetron Microwave System, Nayan Pundhir, Sourav Bolar, Kumbla Chandrashekhara, Kristen Donnell, Jim Lua, Kalyan Shrestha, Rui Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Microwave curing is a fast, energy-efficient, and a viable alternative to conventional thermal curing processes. It has been widely adopted for processing carbon fiber-reinforced polymer composites because the high electrical conductivity of carbon fibers enables strong microwave coupling. In this study, IM7/Cycom 5320-1 unidirectional prepreg has been used to fabricate 64-layer laminated composites. Symmetric cross-ply ([0°/90°]16S) and a quasi-isotropic ([45°/90°/−45°/0°]8S) layup have been investigated. A custom-built six-magnetron microwave applicator and an autoclave were employed to manufacture the composite panels. Degree of cure of the manufactured laminates was evaluated via differential scanning calorimetry. Interfacial bonding and porosity of the microwave-cured laminates …

Design, Construction, And Initial Testing Of A Oxy-Acetylene Testing Facility, Blake Bowman, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Thermal Protection Systems (TPS) are critical for atmospheric re-entry and hypersonic flight vehicles, yet ground-based evaluation of TPS materials remains challenging due to the cost, complexity, and limited availability of large arc-jet and inductively coupled plasma (ICP) facilities. Oxy-acetylene testing provides a low-cost and accessible alternative for preliminary material screening, sensor development, and fundamental studies of material response under high heat-flux conditions. This paper presents the design, construction, and initial validation of the High-Enthalpy Acetylene Testing (HEAT) facility at Missouri University of Science and Technology. The facility incorporates a modular experimental architecture, independently controlled oxygen and acetylene mass-flow systems, and …

Tomo-Piv Study Of A Parallel Two-Dimensional Jet In Supersonic Flow, Josiah Mcdermott, Connor Bell, Davide Vigano

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Stabilizing combustion in supersonic flows is a formidable challenge due to the small time scales afforded for air-fuel mixing. Numerous studies in this area have demonstrated the potential of strut-style platforms for fuel injection and mixing enhancement, which remains an active area of research. In the Aerodynamics Research Laboratory at Missouri S&T, a strut-style injector system has recently been installed. In this study, we characterize the flow structures behind this platform in a range of injection pressures and corresponding mass flux ratios. The wake generated by a strut and injection plume, even absent combustion or mixing enhancement geometry, has an …

2-Point Focused Laser Differential Interferometry Measurements Of A Parallel Jet In Supersonic Flow, Joshua Gary, Joseph Villarreal, Davide Vigano

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Turbulence in compressible flows plays a central role in applications such as air-fuel mixing in supersonic combustors and is significantly more complex than incompressible turbulence due to the presence of fluctuating thermodynamic quantities. As such, models like the Strong Reynolds Analogy (SRA) are used to relate these quantities. However, SRA validity has been examined primarily in boundary-layer flows. In this work, a newly developed Two-Point Focused Laser Differential Interferometry (2-FLDI) system is implemented in a two-dimensional parallel supersonic jet. The diagnostic is described in detail, including optical alignment procedures, calibration methods, and data analysis techniques. Measurements acquired at multiple streamwise …

Corrigendum To “3d Semi-Analytical Thermo-Elasto-Plastic Model For Additive Manufacturing”(Additive Manufacturing, (2026), 127, C, (105308), (S2214860426002344), 10.1016/J.Addma.2026.105308), Tao Liu, Ming C. Leu, Edward C. Kinzel, Chinedum Okwudire

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The author regret about the correction in the Equation B(1) in original article. The corrected version of the Equation B(1) is given below,(1.1)∂uxxx,ξ∂x=116πμ1−ν4ν−1x−ξxR3−3x−ξx3R5−8ν−5x−ξxR13+34ν−3x−ξx3R15−18x−ξxzξzR15+30x−ξx3zξzR17−12ν−12ν−1x−ξxR1R1+z+ξz2+4ν−12ν−1x−ξx3R13R1+z+ξz2+8ν−12ν−1x−ξx3R12R1+z+ξz3 The authors would like to apologise for any inconvenience caused. DOI of original article: < 10.1016/j.addma.2026.105308>

Robust Broadband Characterization Of Flexible Absorbers, Sheet Material, And Liquids Using A Coaxial Structure, Joseph Christopher Stecher

Masters Theses

Modern high-frequency measurement systems require reliable calibration and sample positioning to ensure measurement fidelity. This thesis presents three studies addressing practical limitations in broadband material parameter extraction and instrumentation.

The first study introduces a modified Nicolson–Ross–Weir (NRW) technique for flexible, compression-sensitive materials from 100 MHz to 18 GHz. Rigid 3D-printed spacers ensure precise sample positioning, and a T-matrix–based de-embedding procedure removes spacer effects. Validation using microstrip measurements and full-wave simulation confirms accurate permittivity extraction across compression levels.

The second study extends NRW to sheet materials enabling accurate material characterization. Independent validation using toroidal inductors with leakage correction and parallel-plate capacitors …

Empirical-Based Model Of Spatio-Temporal Errors, Godwin Naaba Ndaa

Masters Theses

This research develops an empirical model to characterize spatial-temporal InSAR errors and improve the accuracy of deformation time-series analysis. Using standardized Sentinel-1 HyP3 products and MintPy, the study quantifies how correlated noise affects velocity precision and validates the results against continuous GNSS velocities.

Residual velocities are near-Gaussian, with σ ~0.92–2.04 cm/yr and ~1 cm/yr on average. Variograms show power-law spatial structure with a non-zero nugget implicating troposphere and decorrelation while errors drop exponentially with more acquisitions; spatial uncertainty is strongly affected by unwrapping errors, coherence, and tropospheric noise, not simply troposphere.

A comparative assessment of on-demand cloud processing with other …

Analyzing Sleep Architecture And Brain State Transitions Via Hidden Markov Models On Fmri Data, Brileigh Jay Cates

Masters Theses

Sleep is associated with systematic changes in brain activity and functional connectivity observable in functional magnetic resonance imagining (fMRI) signals. Because subjects often fall asleep during resting-state experiments, the absence of vigilance monitoring can confound the interpretation of resting-state dynamics. Although electroencephalography (EEG) is the gold standard for sleep staging, simultaneous EEG-fMRI acquisition is not always feasible.

This study investigates whether sleep stages can be inferred directly from fMRI using a probabilistic latent-state framework. Hidden Markov Models (HMMs) are applied to blood-oxygen-level-dependent (BOLD) time series to identify latent brain states and their temporal transitions. Inferred states are aligned with EEG-derived …

Post-Release Mortality Of European Bass (Dicentrarchus Labrax) Discarded From Small-Scale Estuarine Fishing, J. E. Stewart, T. Stamp, P. Davies, A. Hall, T. Robbins, L. Stewart, E. V. Sheehan

School of Biological and Marine Sciences

Estuaries provide essential habitats for many fish species, but their confined and accessible nature may increase fish vulnerability to capture, and few empirical studies have quantified the value of restricting net fisheries in such areas. Furthermore, management measures for some fisheries promote discarding (e.g., of European sea bass; Dicentrarchus labrax), yet the mortality of fish discarded from small-scale inshore fisheries is poorly understood. We used condition assessments, Reflex Action Mortality Predictor scores and acoustic tracking to evaluate post-release mortality of bass captured in small-scale estuarine netting and angling. Gillnet-caught bass exhibited a range of stress responses and 20%–24% mortality shortly …