Digital Commons Network^™

Experimental Investgation Of Core Fluid And Heat Transfer Of Pwr By Using Advanced Measurments Techniques, Saud Aldawood

Doctoral Dissertations

This comprehensive study investigates the thermal-hydraulic mechanisms and convective heat transfer characteristics within (PWRs), with a focus on (SMRs) under both single-phase and two-phase bubbly flow conditions. Specifically, the research investigates the complex bubble dynamics in two-phase flow rod bundles, which are crucial for understanding reactor behavior during loss-of-coolant accidents (LOCA). Employing an advanced experimental setup developed at the (mFReel) at MST, this work measures critical parameters such as void fraction, bubble passage frequency, bubble velocity, bubble chord length, and interfacial area concentration (IAC) using a four-tip optical probe across various locations in the rod bundle. The findings reveal that …

Power Supply Induced Jitter Analysis In High-Speed Drivers, Yifan Ding

Doctoral Dissertations

The Input/Output Buffer Information Specification (IBIS) model faces challenges in accurately simulating power-supply-induced jitter (PSIJ), particularly under nonlinear and time-varying power noise conditions with pre-driver stages. This work introduces advancements in IBIS model modification algorithms to enhance PSIJ simulation accuracy for high-speed drivers.

First, a correction coefficient-based approach was developed to adjust switching coefficients K_pu and K_pd using pre-driver DC jitter sensitivity, significantly improving model robustness under DC and AC power noise. However, its effectiveness diminished under large noise amplitudes due to coefficient shape dominance.

To address this, a simplified algorithm bypassed correction coefficient, directly correlating switching transitions with jitter …

Provenance Of The Uppermost Carboniferous–Lower Triassic Sandstones, Bogda Mountains, Nw China: Implications On The Late Paleozoic Tectonic History Of The Southern Central Asian Orogenic Belt, Sixuan Wu

Doctoral Dissertations

"The Permian-Triassic period represents a significant but insufficiently understood tectonic transition stage in the southern Central Asian Orogenic Belt (CAOB) between the Paleozoic continental amalgamation and Cenozoic orogenic reactivation. This study integrates fieldwork, petrographic, and detrital zircon geochronological data to document the trend of depositional environments, framework grain compositions, and dates of detrital zircon grains of the uppermost Carboniferous–Lower Triassic sandstones from three study areas in Bogda Mountains, the greater Turpan-Junggar basin, NW China, to decipher the spatial and temporal changes in the provenance lithology and area and reconstruct the unroofing history of the southern CAOB.

In the first part …

Metal-Organic Thin Film Coated On Optical Fiber, Nahideh Salehifar

Doctoral Dissertations

This dissertation explores the development of metal-organic framework (MOF)-based optical fiber sensors for detecting volatile organic compounds (VOCs) at low concentrations (parts-per-billion to parts-per-million). In the first part of the study, theoretical calculations were performed using effective medium approximation (EMA) models, including Lorentz–Lorentz, Maxwell–Garnett, and Bruggeman equations, to predict the refractive index changes of MOFs upon gas adsorption. These models were applied to MOFs such as ZIF-7, ZIF-8, ZIF-90, MIL-101(Cr), and HKUST-1 to evaluate their potential for gas sensing.

In the second part of the dissertation, experimental work was conducted to validate the theoretical predictions. MOF-coated optical fibers were fabricated …

On The Importance Of Novel Adsorption Processes And Structured Adsorbents For Biogas Upgrading And Storage, Kyle Newport

Doctoral Dissertations

The current adsorption processes investigated for biogas upgrading encounter severe challenges with regards to both adsorbents and processes, which necessitate the design and development of novel approaches to effectively separate carbon dioxide from methane and, hence, produce pipeline-grade renewable natural gas (RNG) as a fuel. These key challenges include (i) moderate CO2/CH4 selectivity, (ii) relatively long cycle times, (iii) high regeneration energy requirements, (iv) high-pressure drop, and (v) short adsorbent lifetime. The current biogas upgrading processes typically rely on pressure swing adsorption (PSA) or temperature swing adsorption (TSA). While PSA cycles are fast, the system requires large amounts of energy …

Experimental Study Of Defects In Coaxial Wire-Based Laser Metal Deposition, Remy Mathenia

Doctoral Dissertations

This work seeks to improve the usability and capability of coaxial wire-based laser metal deposition (LMD) through the experimental study of process parameters on output geometry, directional effects, and defect formation. Wire-based LMD is a directed energy deposition (DED) strategy that uses a focused laser heat source to melt and fuse metal wire as it is deposited. This process is used to build parts layer-by-layer until a desired geometry is accomplished. LMD enables the creation of complex components at a high build rate with low material and energy waste. This work focuses on the deposition of titanium wire in the …

Mid-Field Shock And Impulse Estimation Methods For Blast Loading On Tall Targets, Ethan Allan Steward

Doctoral Dissertations

Blast resistant structural design continues to be a major research area for governments around the world due to explosive threats from both state and non-state actors. Many of the typical targets of explosive attacks, such as government buildings, commercial high rise office buildings, and apartment complexes are mid to high-occupancy buildings that present a tall profile relative to the charge size and are often clad in curtain walls. In blast resistant structural design, the origin of a shock wave is typically assumed to be in the far-field, creating a wave that is nearly planar and parallel to at least one …

Evaluating And Relaxing The Limits On Flexural Reinforcement Ratio Of Masonry Shear Walls, Tousif Mahmood

Doctoral Dissertations

Reinforced masonry shear walls (RMSWs), essential for lateral and out-of-plane load-resisting systems in modern construction are constrained by TMS 402/602 code limits on reinforcement ratios ("ρ" _"max" ) and axial compressive stresses (≤10% of masonry compressive strength, f_m^'), undermining masonry’s inherent compression capacity under high axial loads. This dissertation investigates the seismic performance of reinforced masonry shear walls (RMSWs) subjected to high axial compressive stresses (10–20% of f_m^'), with a focus on walls violating the maximum reinforcement ratio ("ρ" _"max") and axial load limits of TMS 402-22. Through experimental testing of 30 large-scale fully grouted (FG) and partially grouted (PG) …

Systematic Esd Analysis And Modeling For Electronic Device, Zhekun Peng

Doctoral Dissertations

Systematic ESD analysis provides good pre-compliance to ESD robustness evaluation on the electronic device from device level to component/system level to on-chip level. The whole process involves corona discharge on display, system level ESD analysis on PCB for race condition and transient response and 3D IC package impact to on-die ESD.

ESD to the display cover glass can damage touchscreen traces by sparkless corona discharges on the glass surface. A non-linear time dependent transmission-line model is proposed to model corona streamer propagation in terms of the coupling current and propagation speed. Results are highly promising to model the corona discharge …

The Real-Time Detection Infrastructure Of Ligo, Virgo, And Kagra: Data Products, Current Performance, And Future Developments, Sushant Sharma Chaudhary

Doctoral Dissertations

The discovery of the binary neutron star merger event GW170817 marked the dawn of Multi-Messenger Astronomy (MMA) with Gravitational Waves (GWs). Such multi-messenger events are of immense scientific interest due to the wealth of information they provide through joint observations across different messengers. In this rapidly evolving field, prompt identification and timely distribution of alerts is critical for follow-up observations.

This work offers a comprehensive overview of the LIGO-Virgo-KAGRA (LVK) Collaboration’s low-latency analysis pipeline for GW events, covering key stages from calibration and data analysis to the issuance of public alerts. I examine the latency and accuracy of each stage …

Measurement Method And Applications Of Transfer Function In Rf Desensitization Problem, Xiangrui Su

Doctoral Dissertations

Radio frequency (RF) desensitization issues comprise two components: noise radiation sources and the transfer function from noise sources to the victim antenna. RFI is a critical challenge in modern electronic systems, particularly in densely packed environments. This work presents a comprehensive study of RFI, addressing key aspects through three novel contributions. First, a transfer function measurement method is developed for compact metallic enclosures. This method provides a precise characterization of the electromagnetic (EM) environment within confined spaces, enabling accurate identification of interference pathways. Second, an EM emission management analysis framework is proposed, leveraging transfer functions to quantify and mitigate interference …

Optical Detection Of Instantaneous Microwave Frequency And Displacement, Behzad Boroomandisorkhabi

Doctoral Dissertations

Research presented in this research is focused on developing and implementing novel photonic systems for instantaneous microwave frequency and displacement measurement, emphasizing cost-effectiveness, scalability, and high resolution. The research is encapsulated in three core studies: the design of all-fiber ultrafast ranging Lidar for medical motion management, the application of dispersive interferometry using picosecond laser pulses for laser ranging, and the integration of microwave photonic systems with digital signal processing (DSP) for enhanced measurement precision.

The work achieves micrometer-scale displacement accuracy and microwave frequency resolutions within ±1 MHz across wide dynamic ranges by leveraging dispersive interferometry and time-stretch techniques. The studies …

The Structure, Properties And Dissolution Behaviors Of Phosphate Glasses, Han Zhang

Doctoral Dissertations

The poor chemical durability remains a critical challenge for the application of phosphate glasses. This study investigates the compositional influences on the structure, properties and chemical durability of Li2O-ZnO-P₂O₅ glasses. Their structural characteristics were analyzed utilizing high-performance liquid chromatography, Raman spectroscopy, and X-ray photoelectron spectroscopy. The incorporation of (Li2O+ZnO) in LZeq glasses depolymerizes the phosphate network. In LZ40P and LZ45P glasses, Li⁺ initially replaces Zn²⁺ associated with non-bridging oxygens (NBOs) in Q² tetrahedra. Once the substitution in Q² is complete, further Li⁺ incorporation leads to the replacement of Zn²⁺ in Q^{1 …}

Deep Learning And Adaptive Clustering Approaches For Flood Prediction And Efficient Sensor Placement In Missouri, Fahimeh Sharafkhani

Doctoral Dissertations

Floods represent formidable natural calamities, posing a significant threat to communities and infrastructure due to their unpredictable and often devastating consequences. The occurrence of floods is influenced by a convergence of meteorological, hydrological, and geographical factors, resulting in changes to the patterns of rising water levels. Machine learning models have emerged as favored tools in recent times for modeling water levels and enhancing the precision of flood predictions. This research employs both supervised and unsupervised machine learning models, with the main objective of improving the accuracy of flood predictions and sensor placement. Four distinct deep learning models are used to …

Epitaxial Growth Of Metal-Organic Framwork Thin Films By Electro-Conversion And Electrodeposition, Xiaoting Zhang

Doctoral Dissertations

Electrochemical epitaxy is a facile and inexpensive soft-solution process to fabricate highly ordered thin films. This research focuses on the epitaxial growth of metal-organic framework (MOF) thin films by electrochemical methods which include electro-conversion and electrodeposition.

First, an electrochemical conversion pathway was invented to achieve epitaxial MOF thin films. Epitaxial single-domain Cu-BTC(111) thin films were manufactured by electrochemical oxidation of Cu₂O(111) films electrodeposited on single-crystal Au(111). The single-crystal-like Cu-BTC(111) thin films with out-of-plane and in-plane order provide well-aligned 3.5 Å triangular windows along the [111] direction. Cu-BTC(111) foils were fabricated from the Cu-BTC/Cu₂O system by electrochemical …

Design And Synthesis Of Organocatalyts For Efficient Decontamination Of Organophosphate-Based Nerve Agents And Pesticides, Emmanuel Kingsley Darkwah

Doctoral Dissertations

Exposure to organophosphate-based nerve agents and pesticides poses significant health and security threats to civilians, soldiers, and first responders. Despite extensive efforts to develop chemical detoxification agents for use in topical applications on exposed skin surfaces and for intravenous injections, there remains an unmet need for effective, non-hazardous decontaminating agents. The current state-of-the-art decontaminating agent, Dekon-139 (2,3-butanedione oxime, potassium salt), exhibits adverse effects when applied to the skin.

In this study, we designed and synthesized pharmaceutically relevant aminoguanidine-derived aldimines that are relatively non-toxic and substantially more effective at decontaminating nerve agents and pesticides compared to existing agents, and they act …

Design Of Real-Time And Energy-Efficient Driver Assist Systems Using Electroencephalogram And Neuromorphic Computing, Nathan Alan Lutes

Doctoral Dissertations

Despite the technological breakthroughs in advanced driver assist systems, distracted driving persists as a major challenge to roadway safety. This investigation advances the body of knowledge towards a solution by developing an individualized driver-state detection method using electroencephalogram (EEG) and neuromorphic computing to provide a less invasive and more energy efficient ADAS solution. It furthermore explores the changes in brain functional connectivity under distracted conditions to better understand brain state information that could be used for neuro-feedback intervention systems. The first contribution introduces the concept of using Convolutional Spiking Neural Networks (CSNNs) for recognition of patterns with movement-intention predictive power …

Higher-Order Statistics And Normalized Decay Analysis For Detector Deadtime Characterization, Abdallah Wazzan

Doctoral Dissertations

Detector deadtime limits radiation measurement accuracy at high count rates, yet current methods rely on idealized paralyzable or non-paralyzable models. Real detectors exhibit hybrid behavior requiring advanced characterization approaches. This study explores deadtime characterization using two Monte Carlo simulation approaches: higher-order statistical analysis of inter-arrival times and simplified deadtime correction with hybrid models.

Using MATLAB (PULSE-WIZ), we analyzed full decay curves spanning ~4.5 half-lives of Cobalt-60 and Vanadium-52, examining coefficient of variation (CV), skewness, and kurtosis of inter-arrival times, plus normalized decay curves with Full Width at Half Maximum (FWHM) analysis. Hybrid models incorporated paralyzable and non-paralyzable components with dead …

Advancing Thermodynamic Modeling In Materials Design: From Phase Stability In Metallic Systems To Ferroelectric Property Prediction In Functional Oxide, Kyaw Hla Saing Chak

Doctoral Dissertations

This dissertation advances the CALPHAD (CALculation of PHase Diagrams) approach for thermodynamic modeling which often lacks sufficient description of crystal lattices for critical phases in multicomponent system. Additionally, CALPHAD does not consider the structural features and its connection with functional properties for functional materials. To address these issues, a novel dual-ordered sublattice model for the κ-phase in Fe-Al-C system, (Fe,Al)3(Fe,Al)1(C,Va)1(C,Va)3, is introduced that improves predictions of equilibrium compositions and phase stability by accounting for both substitutional and interstitial ordering. For the Fe-B-C system, new sublattice formulations for FCC [(Fe)1(C,B,Va)1] and BCC [(Fe,B)1(C,B,Va)3], phases enhance boron solubility predictions and reveal insights …

Dynamic Response, Assessment, And Retrofitting Of Prestressed Concrete Bridge Girders Subjected To Lateral Impact Loads, Haitham A. Abdelmalek

Doctoral Dissertations

Over height vehicle collisions pose a growing threat to the resilience of bridge infrastructure across the United States. According to the American Road & Transportation Builders Association (ARTBA, 2024), approximately 36% of all U.S. bridges require major repair or replacement, with an estimated cost of $400 billion. This dissertation investigates the structural dynamic response, damage assessment, and retrofitting strategies for prestressed concrete (PC) bridge girders subjected to lateral impact loading.

The research comprised two main phases: (1) numerical modeling and (2) experimental testing. A validated 3D nonlinear finite element (FE) model was developed to conduct parametric studies on impact behavior, …

Nutrient Fate, Mass Balance, Species Selection, And Plant Management Strategies With Floating Treatment Wetlands, Carla Campbell

Doctoral Dissertations

Excess nutrients in shallow urban ponds can lead to harmful algal blooms, low dissolved oxygen, and internal phosphorus cycling. These effects can compromise municipal water supplies and cause negative impacts on fisheries and recreation. Floating treatment wetlands (FTWs) show promise to mitigate surface water nutrient pollution. However, despite recent research, many aspects of FTWs remain poorly characterized. The contribution of FTW components to nutrient removal, local species selection, and plant management strategies were the focus of this dissertation. Mesocosm experiments revealed that the combination of plants and coir fiber growth media in FTWs appeared to positively affect plant biomass gain …

Synthesis Of Graphene Using Carbonaceous Materials In An Ultrasonic Reactor, Paul Chukwuma Ani

Doctoral Dissertations

The synthesis of high-quality graphene from sustainable carbonaceous feedstocks offers an avenue to reduce the environmental and economic costs associated with conventional graphite-based production. This research investigates the co-utilization of biochar and graphite as precursors for graphene fabrication in an ultrasonic reactor. Biochar was produced from biomass via downdraft gasification at 850 °C, yielding a high fixed-carbon, partially graphitized material with favorable surface area and porosity. Graphite, selected for its crystalline structure, was investigated with biochar to assess the influence of precursor composition on exfoliation efficiency, layer thickness distribution, and defect density. Ultrasonic-assisted liquid-phase exfoliation was employed, with process parameters …

Tailoring Selected Aerogels To Targeted Applications, Stephen Yaw Owusu

Doctoral Dissertations

Aerogels are ultra-lightweight, porous solid materials characterized by a three-dimensional nanostructured network. Owing to their exceptional physical and chemical properties, aerogels have garnered considerable attention within the materials science community and were recognized by IUPAC in 2022 as one of the top ten emerging technologies in chemistry. Although numerous aerogels have been synthesized, only a few have been effectively tailored for specific applications. Optimizing the properties of known aerogels for targeted uses remains challenging. This dissertation investigates strategies for tailoring aerogels derived from isocyanate-benzoxazine, benzodiazine, and phenolic resins to meet the requirements of various advanced applications. The approaches employed include …

Deep Learning Architecture Design For Nano-Satellite Image Super-Resolution, William Everette Symolon

Doctoral Dissertations

Increasing threats to U.S. national security satellite constellations have resulted in an increased interest in constellation resilience and satellite redundancy. NanoSats have contributed to commercial, scientific and government applications in remote sensing, communications, navigation, and research. They also have the potential to enhance satellite constellation resilience. However, the inherent size, weight, and power limitations of NanoSats enforce constraints on imaging hardware; the small lenses and short focal lengths result in imagery with low spatial resolution, which limits the utility of CubeSat images for military planning purposes and national intelligence applications. This research proposed a deep learning architecture capable of enhancing …

Advancements In Signal Processing And Image Reconstruction For Active Microwave Thermographic Measurements, Logan Martin Wilcox

Doctoral Dissertations

Active microwave thermography, or AMT, is a coupled electromagnetic-thermographic nondestructive testing and evaluation technique. AMT has found success in a variety of inspection needs in the aerospace, space, and infrastructure fields due to its unique type of thermal excitation. During an AMT inspection, a specimen is exposed to microwave energy from a radiating source (i.e., an antenna). This exposure to microwave energy results in dielectric/magnetic heating, which causes an increase in temperature and potential defect indications to manifest on an inspection surface (which is measured via an infrared camera). Due to the use of an antenna, there is a spatially …

Machine Learning Models For Location Prediction, Message Routing And Path Planning For Rescue Of Underground Miners, Abhay Goyal

Doctoral Dissertations

Self-rescue during underground mine disasters is vital for miner safety. Evolving hazards and post-disaster conditions demand solutions that enable navigation under severe communication and computational constraints. Centralized systems often fail in such rugged settings, while decentralized methods—particularly Delay Tolerant Networks (DTNs), proven in battlefields and space missions—offer distinct advantages for underground applications. This research addresses five core challenges: (i) predicting miners’ next locations on low-power devices using points of interest and movement sequences; (ii) delivering timely updates on safe routes, evacuation zones, and hazardous areas; (iii) evaluating energy efficiency and comparing graph-based approaches to existing methods; (iv) enabling edge-ready frameworks, …

Investigating The Effects Of Fly Ash On The Properties Of Silica-Deficient High Alumina Materials, Sai Akshay Ponduru

Doctoral Dissertations

This research is made up of five studies mainly focused on attaining sustainability in high alumina cements like calcium aluminate cement (CAC) and calcium sulfoaluminate belite cements (CSAB) by partially replacing them with additives and supplementary cementitious materials (SCMs) like fly ash (FA). The first study focused on understanding the reaction kinetics of CAC and FA binders at different replacement levels (i.e. between 10%-to-50% by mass) and their effect on mechanical properties. It was also shown that the reactive nature of FAs can be determined by calculating a single parameter called number of constraints (nc) derived from topological constraint theory. …

Process-Structure-Property Relationships In Laser Powder Bed Fusion Produced 17-4 Ph Steel, Ben Brown

Doctoral Dissertations

Laser powder bed fusion (LPBF) is a metal additive manufacturing method that produces non-traditional microstructures as a result of the rapid solidification and thermal cycling inherent to the process. When using LPBF-produced material in application, these unique microstructures challenge the applicability of well-developed mechanical property databases achieved by conventional heat treatments. For wider adoption of this technology, a more holistic understanding is necessary on how process attributes develop material structure, which dictate mechanical properties. This dissertation explores the process structure-property relationships in LPBF 17-4 PH steel through systematic evaluation of atmospheric processing and heat treatment effects on microstructure and mechanical …

Identification Of Corrosion Damage, Vibration, And Loose Conections In Aircraft Data Transmission Lines Using Reflected And Transmitted Signals; Formulation Of Vegetable Oil-Based Nanofluids As Cutting Fluids For Mql Machining, Saidanvardzhon Valiev

Doctoral Dissertations

This research presents a novel Frequency Domain Transmitometry (FDT) method that uses transmitted signals (S21) to detect and characterize aircraft data transmission lines (ADTL) corrosion damage without additional reflectometry circuitry. Corrosion experiments were conducted according to ASTM G85-A5 over 14 weeks. Combined FDT and reflected signals (S11) analyses revealed distinct three-peak signatures associated with damage and corrosion. The square root of the Area Under the Curve (AUC) of the FDT damage peak and the Full Width at Three-Quarter Maximum (FW3QM) of the S11 damage peak is correlated with corrosion propagation depth and width. S11 signals were further used for vibration …

Annual Report: Fy 2025 Quality Of Kerosene And Motor Fuel In Tennessee, Tennessee. Department Of Agriculture

Annual Reports on Kerosene & Motor Fuel Quality

The annual report provides data on the effectiveness of the 1989 Kerosene and Motor Fuels Quality Inspection Act, consumer complaints, inspection data, and summary of enforcement.