Digital Commons Network^™

Establishing Pteridine Metabolism In A Breast Cancer Cell Model And Quantification Of Silver Nanoparticle Interactions With Yeast Cells Using Mass Spectrometry, Lindsey Katherine Rasmussen

Doctoral Dissertations

"Recent advances in analytical methods have furthered the quantitative insights that can be gleaned from cellular analyses, with applications in cancer and nanoparticle research. In the first part of the research presented, a recently developed HPLC-MS/MS method was advanced to elucidate pteridine metabolism in an isogenic progressive MCF10A breast cancer cell model. The folate-derived pteridine pathway in breast cells was established by individually dosing cell cultures with folic acid and 15 pteridines. Eight potential pteridine biomarkers in breast cancer cells were identified including pterin and isoxanthopterin, which yielded the first in vitro evidence for the cellular metabolisms behind previously reported …

Design And Performance Of Self-Consolidating And Thixotropic Ultra-High-Performance Concrete For Infrastructure Construction And Rehabilitation, Le Teng

Doctoral Dissertations

"The objective of this research is to develop two classes of ultra-high-performance concrete (UHPC), one with self-consolidating consistency and the other with improved thixotropy. Tailoring the rheological properties of low yield stress UHPC can improve dispersion and orientation of steel fibers used in the design of UHPC, hence enhancing the tensile and flexural properties. Similarly, improving the thixotropy of UHPC can enable unique performance for the design of thin bonded bridge deck overlay. The research investigated various thixotropy enhancing admixtures to enhance the structural build-up at rest of UHPC. A total of 16 bonded overlay slab specimens were used to …

Development And Testing Of A New Air-Assisted Flare System For Low Flow Conditions, Hayder Alhameedi

Doctoral Dissertations

"Flare systems provide a safe, efficient, and reliable way to treat unwanted flammable gases that come from relief devices of various chemical processing equipment to ensure the safety of personnel and equipment. Flare systems are classified according to the assist media type as non-assisted (utility), steam-, air-, and pressure-assisted flares. The assist medium enhances mixing between flare gases and surrounding air and induces more air into the combustion zone. An air-assisted flare system is the preferred flare type in regions where steam is unavailable or is costly to supply or ambient temperatures are too low. The environmental protection agency (EPA) …

Data-Driven Modeling And Simulations Of Seismic Waves, Yixuan Wu

Doctoral Dissertations

"In recent decades, nonlocal models have been proved to be very effective in the study of complex processes and multiscale phenomena arising in many fields, such as quantum mechanics, geophysics, and cardiac electrophysiology. The fractional Laplacian(−Δ)^��/2 can be reviewed as nonlocal generalization of the classical Laplacian which has been widely used for the description of memory and hereditary properties of various material and process. However, the nonlocality property of fractional Laplacian introduces challenges in mathematical analysis and computation. Compared to the classical Laplacian, existing numerical methods for the fractional Laplacian still remain limited. The objectives of this research are …

Advanced Materials And Processes For Gas Separation And Storage Applications, Qasim Mohammed Al-Naddaf

Doctoral Dissertations

"Transition to a clean, renewable energy future requires departure from thermally driven separation processes. In that regard, development of new materials that exhibit high adsorption capacity and selectivity, fast kinetics, and long-term durability under multicomponent conditions is becoming attractive for the applications in clean energy. Moreover, novel sorbents and separation systems that can store gases at normal conditions offer a promising approach for stationary or onboard gas storage. Due to the limitations on the surface area and biding energy restrict commercial materials effectiveness as a potential adsorption and storage material. There is significant interest in the properties of hybrid materials …

Engineering Ni/Al2o3 Catalysts By Atomic Layer Deposition For Methane Reforming, Baitang Jin

Doctoral Dissertations

"Dry reforming of methane (DRM) could be a promising choice to utilize natural gas (mainly methane or CH₄), recycle captured CO₂, and produce valuable syngas. Promoters (e.g., CeO₂ and MgO) on Ni/Al₂O₃ prepared by atomic layer deposition (ALD) and ALD-prepared ultrathin overcoating (e.g., ZrO₂ and CeO_x) on Ni/Al₂O₃ prepared by incipient wetness method were investigated for methane reforming.

MgO and CeO₂ prepared by traditional incipient wetness method were used to promote the performance of ALD-prepared Ni nanoparticles (NPs) supported on four-channel α-Al₂O_{3 …}

Corrosion Resistance Performance Investigation Of Mild Steel Bar Coated With Magnesium Phosphate Cement Paste, Fan Zhang

Doctoral Dissertations

"In this research study, the anti-corrosion mechanism of reinforcement embedded in magnesium potassium phosphate cement (MKPC) is explored. In addition, one type of additives, metakaolin, and one type of retarder, boric acid, are employed in MKPC to modify its properties in order to further investigate corrosion resistance and to achieve mass-production coating reinforcement at the work site. This coating method may be practical for some underwater construction and some traditional reinforcement concrete structures to reduce the reinforcement corrosion rate and to eventually extend service life in both repair and new construction applications.

By comparing the electrochemical properties of bare ribbed …

Electrocatalytic Processes For Energy Storage & Conversion, Apurv Saxena

Doctoral Dissertations

"The continuous excessive usage of fossil fuels has resulted in its fast depletion leading to an escalating energy crisis as well as several environmental issues leading to increased research towards sustainable energy conversion. Electrocatalysts play crucial role in the development of numerous novel energy conversion devices including fuel cells and solar fuel generators.

High-efficiency and cost-effective catalysts are required for large-scale implementation of these new devices. Over the last few years transition metal chalcogenides have emerged as highly efficient electrocatalysts for several electrochemical devices such as water splitting, carbon dioxide electroreduction and, solar energy converters. These transition metal chalcogenides exhibit …

Processing To Enable Direct-Write Additive Manufacturing Of Ceramics And Ceramic Composites, Austin Martin

Doctoral Dissertations

"This research focuses on the processing of novel feedstocks for and during direct-write additive manufacturing (AM), specifically the direct ink writing (DIW) and Ceramic On-Demand Extrusion (CODE) manufacturing processes, in order to produce ceramic and ceramic-based composite components. Strongly dispersed, concentrated (φ = 0.42), nanoparticle (d₅₀ ~0.3 µm), zirconia (ZrO₂) pastes were used to print densely filled, large continuous volume (≳ 1 cm³) ceramic components. An elastic shear modulus (G’) of 56,000 Pa and yield stresses between 6 and 10 Pa allowed for printed components of 34.5 mm in height over 115 layers without slumping …

Oxidation Of Silicon Carbide And Graphite For High Temperature Gas-Cooled Reactor Applications, Adam Thomas Bratten

Doctoral Dissertations

"This research focuses on the oxidation behavior of silicon carbide and matrix grade graphite, specifically as it pertains to accident scenarios in Gen IV thermal spectrum high temperature gas cooled nuclear reactors. It is imperative to understand the oxidation behavior of such materials to predict their response to off-normal environments and certify their accident tolerance to implement Gen IV reactors. The onset of oxidation temperature of matrix graphite was found to have a strong dependence on the microstructure, and therefore processing parameters, of the materials. The A3-3 type grade contained regions of partially graphitized carbon that were more disordered and …

Surface Modification To Improve The Electrochemical Performance Of Cathode Materials For Lithium-Ion Batteries And Sodium-Ion Batteries, Han Yu

Doctoral Dissertations

"The specific capacity of active materials as well as their cycling stability are the main limiting factors for the performance of lithium-ion batteries (LIBs) and sodium-ion batteries (SIB). Atomic layer deposition (ALD) is considered as a promising surface modification method to enhance the electrochemical performance of active materials for LIBs and SIBs.

In this research, we are committed to using ALD to modify the cathode materials of LIB, by coating different films on the surface of different cathode materials and constructing a stable and favorable interface layer for lithium-ion transport, so that we can protect the active materials from the …

Processing And Characterization Of Tini-Based Alloys Fabricated By Laser Aided Manufacturing, Yitao Chen

Doctoral Dissertations

"Laser powder-based directed energy deposition (DED) is a major laser aided additive manufacturing (AM) process for metals. It applies laser energy to deposit metal powders to form 3D metal parts. Apart from manufacturing traditional alloys, DED can also be used to develop advanced alloys with the novel idea of elemental powder mixture feedstock. TiNi-based alloy is a type of shape memory alloy (SMA), a smart material with unique shape memory effects. Using laser powder DED to synthesize TiNi-based SMAs from elemental powder mixture can create more possibilities in new compositions and properties. It can also overcome the limitations of conventional …

Signal Integrity Analysis And Electromagnetic Inteference Modeling For Autonomous Vehicles, Yuandong Guo

Doctoral Dissertations

"An autonomous vehicle (AV) may employ various sensors to detect the environment, and the hardware for self-driving should be able to process large volume of sensor data and make real-time decisions. For signal integrity (SI), both the bandwidths and data rates of the high-speed channels should meet the requirements. The electromagnetic interference (EMI) noise may become a major concern with the ever-increasing number of electric modules. This research focuses on both SI analysis and EMI modeling for AVs. The first topic is accurate and broadband three-phase motor modeling. The novel modeling methodology for a typical three-phase motor is presented, using …

Use Of Cellular Concrete For Air Convection Embankment To Protect Permafrost Foundation In Cold Regions, Hanli Wu

Doctoral Dissertations

"Crushed-rock air convection embankment (ACE) has been used to mitigate thaw settlement, and pavement distresses caused by climatic extremes in permafrost regions for over three decades. However, the desired crushed rocks needed for ACE are not readily available in many areas of interior Alaska. Burdened by the need to ship suitable rocks to remote locations, the cost of constructing an ACE is often prohibitively high, which prevents its wide use in Alaska. An existing cementitious material, cellular concrete, may provide the solution.

This study intends to systematically characterize the heat transfer patterns of ACE and identify the performance benefits of …

Secure And Efficient Information Management In Delay(Disruption) Tolerant Network, Shudip Datta

Doctoral Dissertations

"In environments like international military coalitions on the battlefield or multi-party relief work in a disaster zone, multiple teams are deployed to serve different mission goals by the command-and-control center (CC). They may need to survey damages and send information to the CC for situational awareness and also transfer messages to each other for mission purposes. However, due to the damaged network infrastructure in the emergency, nodes need to relay messages using the store and forward paradigm, also called Delay-tolerant Networks (DTNs). In DTN, the limited bandwidth, energy, and contacts among the nodes, and their interdependency impose several challenges such …

Investigating The Interaction Between The Recycled Components And The Asphalt Binders, Plant, Lab, And Field Mixes, Eslam Deef-Allah

Doctoral Dissertations

"Modifying asphalt binders and mixes with recycled components is common practice due to their environmental and economic merits. Literature has indicated that different recycled components interact with (blend with) asphalt differently, ranging from no blending, partial blending, or full blending. The degree of blending between recycled components and virgin asphalt binders (VABs) and the exchanged components impact the performance of modified asphalt binders. However, the nature of the interaction process between the recycled components and the VABs is not fully understood. The primary objective of this study was to explore the interactions between recycled components and VABs. By understanding the …

Computational Fluid Dynamics Techniques For Multiphase Flow Systems, Jose Sebastian Uribe Lopez

Doctoral Dissertations

"Mathematical modelling of multiphase flow systems has been a major and persistent challenge over the last decades. Vast attempts to obtain predictive models can be found reported in literature, where major advances can be recognized in recent years, paired to enhancements in computer science and engineering. Notwithstanding, universally valid models with a mechanistic development are far from being achieved. The current status of modelling any multiphase flow system relies on the model order reduction of purely theoretical models. Such reductions and simplifications become the source of deviations in the predictions of the experimentally measured parameters and will constrain the applicability …

Pi And Emi Analysis Of 3d Ic System With Tsvs And Co-Packaged Optics, Wei Zhang

Doctoral Dissertations

"With the demand for developing high-capacity, high-density, high-power optical links for data center communications, co-packaged optics is a promising solution. When the three-dimensional (3D) IC and optic engines are integrated into the same package, the design of such systems in terms of signal integrity, power integrity, and electromagnetic interference will be more challenging.

This first paper mainly focuses on modeling the bias-voltage-dependent, temperature-dependent, and light-intensity-dependent hysteresis behavior of a through-silicon-vias (TSV) structure in 3D IC and analyzing its effect on the power integrity of a system with 3D IC.

This second paper investigates the scaled tendency of the emissions in …

Accuracy Improvement Of Cable Harness Modeling & Analytical Modeling Of Multi-Reflections In High-Speed Signal Channels, Muqi Ouyang

Doctoral Dissertations

"Cable harnesses are widely used in modern vehicles to power electric systems locating at different locations throughout the vehicle and to establish signal channels for data communications between these systems. Generally, a cable harness consists of multiple wires and its geometry can be very complicated, making full-wave modeling and simulation approaches computational resource-intensive. To cut down the computational effort, the hybrid multiconductor transmission-line (MTL) method has been developed, and the generalized MTL (GMTL) method and the multiple scattering (MS) method have been developed to improve the accuracy of the hybrid MTL method. In this research, the convergence issue in the …

Synergistic Effect Of Shrinkage Mitigating Strategies On Performance Of Fiber-Reinforced Cementitious Composites, Kamran Aghaee

Doctoral Dissertations

"The advantages of using shrinkage mitigating strategies to reduce shrinkage and mitigate cracking of concrete is well documented. However, the benefits and drawbacks of employing multiple strategies have not been explored. The main objective of this study is to provide insights into the mechanisms of using multiple strategies to enhance shrinkage and cracking resistance to promote the properties of high-performance cementitious composites (HPC) designated for infrastructural construction, repair, and 3D printing applications. HPC mixtures were prepared with steel and synthetic macro and microfibers, expansive agent (EA), and shrinkage reducing admixture (SRA) coupled with various curing methods e.g., internal curing using …

The Effect Of Mass Transport On Deposit Quality In Copper Electrowinning, Joseph Bauer

Doctoral Dissertations

"Roughness and nodulation of copper electrodeposits depend strongly on mass transfer conditions of copper ions to the electrode surface. Mass transfer properties in electrowinning electrolytes were first characterized. The effective diffusivity of cupric ion was measured with a rotating disk electrode in CuSO₄-H₂SO₄ electrolytes at temperatures relevant to electrowinning, with and without additives. Adding 20 mg L^-1 of chloride ion increased the measured diffusion coefficient, but commercial smoothing additives had little effect. An empirical formula to predict cupric diffusivity was generated for later use in mass transport modeling.

Boundary layer thickness information for commercial …

Design And Synthesis Of Purine Based Neuroprotectors And Novel Synthetic Methods For The Trifluoromethylation Of Aldehyde Hydrazones, Puspa Aryal

Doctoral Dissertations

"Purine-derived compounds are widely investigated as cyclin-dependent kinase inhibitors that have broad applications in the design of pharmaceuticals for treating diseases, such as diabetes, atherosclerosis, and cancers. Towards the goal of effective AGE-inhibitors, and neuroprotector compounds we have synthesized a series of novel purine-based triazoles and investigated their neuroprotective effects, using SHSY-3Y human neuroblastoma cell line. Through these studies, we have identified purine-based neuroprotector compounds that favorably modulate oxidative stress induced by the Fenton reaction-generated reactive oxygen species (ROS).

The C(sp²−H)-trifluoromethylation of hydrazones would give access to the αtrifluoromethylated hydrazones that can serve as intermediates in the synthesis …

Multifunctional Behaviors Of Two-Dimensional Materials And Their Composites, Yanxiao Li

Doctoral Dissertations

"Two-dimensional (2D) materials, including graphene, transition metal carbides or nitrides (TMC/Ns), have rich surface chemistry, superb electrical and mechanical properties. These unique properties make them ideal for multifunctional devices. Among them, we focused on graphene and TMC/Ns (i.e., MXenes), as well as their composites. Unlike the well-known graphene, MXenes, are relatively new and typically synthesized by the selective etching of the “A” layers from the layered carbides and /or nitrides known as MAX phases, which introduce MXenes with rich terminal groups (e.g. -O-, -OH, -F).

During my Ph.D. study, firstly, the adhesive and frictional behaviors, which are related to successful …

Multi-Stage Multi-Market Optimal Bidding Strategy In Electricity Markets, Hossein Mehdipourpicha

Doctoral Dissertations

"Restructuring of power industry created the competitive situations for different MPs through designing appropriate electricity markets. Typically, in pool-based electricity markets, MPs submit their offers, and ISO clears the market and notifies MPs of the cleared power amounts and market prices. In this situation, designing an effective bidding strategy for MPs who seek to maximize their profits has thus become one of the crucial yet difficult tasks that still need further exploration. The majority of recent studies overlooked this problem for the purely financial players. Therefore, designing an efficient strategy for virtual bidder in the pool-based electricity markets is studied …

Laterally Heterogeneous Seismic Anisotropy Investigated By Shear Wave Splitting Analyses, Yan Jia

Doctoral Dissertations

"Numerous geophysical studies suggest that seismic anisotropy is a nearly ubiquitous property of the Earth’s crust and upper mantle. In this study, we utilize the shear wave splitting technique to investigate the piercing-point-dependent azimuthal anisotropy beneath the northeastern edge of the Sichuan Basin in central China, and the spatial and temporal variations of anisotropy near the 2019 M7.1 Ridgecrest earthquake in California, respectively. A clear back azimuthal dependence of the splitting parameters and the lack of a 90° or 180° periodicity of azimuthal variation in the observed fast orientations provide strong evidence for the existence of piercing-point-dependent anisotropy beneath the …

Groundwater Withdrawal Estimation Using Integrated Remote Sensing Products And Machine Learning, Sayantan Majumdar

Doctoral Dissertations

"The rising demands for water, food, and energy primarily driven by the increasing global population constitute a pressing issue worldwide. Therefore, the water-food-energy nexus plays a substantial role in developing globally applicable sustainable solutions. Recent technological advancements, including the earth observation programs using spaceborne remote sensing platforms, have enabled us to monitor various critical components affecting the globe. Groundwater, which comprises the world's 30% freshwater, is one such key component of the global water resources and supplies nearly half of the global drinking water.

Despite groundwater overdraft in many parts of the world, including the United States (US), there are …

Using Computational Methods To Optimize High Heat Flux Component Thermal Performance In Magnetic Confinement Fusion Reactor Research, Monica Gehrig

Doctoral Dissertations

"Heat transfer enhancement by means of internally modified geometries in tubes and channels is an important mechanism to improve the survivability of components in extreme high-heat flux environments. Various features such as ribs and fins are studied using computational fluid dynamics in both uniform and one-sided heating in tubes and rectangular channels respectively to determine the most effective geometries across a variety of different flow and heating conditions. This work examines heat transfer enhancement and rib geometry optimization to support experimental research for nuclear fusion applications. The project begins by designing and analyzing test sections supporting a helium flow loop …

Molten Steel Interactions With Tundish Linings And Refractory Glazes, Tyler Michael Richards

Doctoral Dissertations

"In the final stages of casting, molten steel is in contact with two main types of refractories: the working lining of the tundish used to serve as an intermediate vessel between the ladle and copper mold, and the various glazed carbon-bearing refractories used to control the flow of steel from the ladle to the tundish and from the tundish to the mold. If steel interacts with these refractories in such a way as to result in the formation of inclusions, it may be too late to remove them, leading to degradation of the steel’s mechanical properties. Understanding these interactions and …

Promoting Distributed Energy Deployment And Diffusion For Sustainable Civil Infrastructure Using Multi-Agent Based Modeling And Quantitative Analytics, Gasser Ali

Doctoral Dissertations

"Distributed Solar Generation (DSG) using small-scale Photo-Voltaic (PV) is an evolving technology with increasingly growing market penetration due to its significant benefits to consumers and broader power systems. DSG is sustainable, provides reliability, and is cost-effective where solar energy is abundant. However, the increasingly growing adoption of DSG creates uncertainties in forecasting electric power demand and market behavior. It also causes concerns of a “utility death spiral”. To this end, the goal of this research is to critically analyze the diffusion and benefits of DSG in the electric power infrastructure as a complex System-of-Systems (SoS). Specifically, this dissertation addresses the …

Mantle Flow And Transition Zone Discontinuities Beneath The Carribean Plate: Constraints From Shear Wave Splitting And Receiver Function Analyses, Tu Xue

Doctoral Dissertations

"Azimuthal anisotropy quantified by teleseismic SKS, SKKS, PKS (“XKS”) and local S wave splitting parameters is used to investigate lithospheric deformation and asthenospheric flow beneath the boundary zone of the North American and Caribbean plates and adjacent areas. A total of 4915 XKS and 1202 pairs of local S wave splitting parameters were obtained at 24 broad band seismic stations. The XKS observations can be divided into two groups based on the spatial distribution of the resulting fast polarization orientations. Those observed on the Caribbean Plate are mostly WNW-ESE which are roughly trench-parallel. In contrast, the fast orientations observed on …