Digital Commons Network^™

Adaptive Data Analysis For Damage Detection And System Identification In Civil Infrastructure, Hongya Qu

Doctoral Dissertations

"Time-varying structural systems are often encountered in civil engineering. As extreme events occur more frequently and severely in recent years, more structures are loaded beyond their elastic conditions and may thus experience damage in the years to come. Even if structures remain elastic, energy dissipation devices installed on structures often reveal hysteretic behaviors under earthquake loads. Therefore, it is imperative to develop and implement novel technologies that enable the identification and damage detection of time-varying systems. In this dissertation, adaptive wavelet transform (AWT) and multiple analytical mode decomposition (M-AMD) are proposed and applied to identify system properties and detect damage …

A Proactive Drilling System To Prevent Stuck Pipe And Differential Sticking, Ethar H. K. Alkamil

Doctoral Dissertations

"During drilling operations for the E oilfield in the Mishrif formation in southern Iraq, stuck pipe and differential sticking have been identified as significant geomechanical and drilling problems for several deviated wells. In this work, an integrated approach with three phases is presented to serve as a proactive geo-drilling system to prevent wellbore instability. In the first phase, a comprehensive geomechanical assessment of the Mishrif formation has been carried out to evaluate the in-situ stresses, maximum horizontal stress orientation, pore pressure, rock properties, and rock strength parameters. Moreover, the geomechanical evaluation has been incorporated into the mud design using three …

Soy-Based Polyurethane Foam For Insulation And Structural Applications, Gurjot S. Dhaliwal

Doctoral Dissertations

"Polyurethane (PU) foams are widely used as insulation materials due to their high insulation properties and low cost compared to conventional materials such as styrene and mineral wool. PU foams are traditionally fabricated with petroleum-based precursors. However, high crude price and higher carbon footprint has lead interest of researchers to synthesis PU foams using plant-based raw materials, that are inexpensive and renewable. In this dissertation, PU foams were fabricated using soy-based polyol and its thermal and mechanical properties were investigated. In the first part, of PU foam samples with different formulations were fabricated using soy-based polyol HB230, and varying amounts …

Critical Buckling And Post-Buckling Behavior Of Thin-Walled Liners Encased By Underground Pipelines In Saturated Soils, Zhaochao Li

Doctoral Dissertations

"This study aims to investigate the structural stability of thin-walled liners encased in functionally-obsolete underground pipelines in saturated soil under external hydrostatic pressure, a concentrated load, temperature change or their combination, and develop a simplified circular arch model of thin-walled liners when not constrained by the pipelines. The friction and adhesion on the interface between a liner and its constraining surface (pipeline or grouting), and the pressure gradient on deeply-buried pipelines are neglected. The critical buckling load of elastic liners is analytically derived under a plane strain condition using the principle of minimum potential energy. The analytical solution is either …

Engineering Zeolite Catalysts Through Porosity And Surface Acidity Control For Selective Production Of Light Olefins, Xin Li

Doctoral Dissertations

"Zeolites are broadly used as heterogeneous catalysts in various chemical and petrochemical industries to produce value-added chemicals and fuels, mainly due to their large surface area, acid-base properties, high thermal stability, and excellent shape-selectivity. In this dissertation, various zeolite catalysts were engineered through fine-tuning micro-meso-macro-porosity and surface acidity. The engineered zeolites were used as heterogeneous catalysts for production of light olefins such as ethylene and propylene through alcohol dehydration and hydrocarbon cracking reactions.

To control the zeolite porosity and acidity, SAPO-34@ZSM-5 and SAPO-34@Silicalite-1 composites with core-shell structure were synthesized and evaluated in ethanol dehydration reaction. Analysis of catalytic performance revealed …

Crustal Structure Beneath The Eastern Margin Of The Tibetan Plateau And Adjacent Areas From Receiver Function Stacking And Gravity Modeling, Yunxin Peng

Doctoral Dissertations

"To provide constraints on the mechanisms responsible for the uplift and crustal thickening of the eastern Tibetan Plateau, the thickness and Vp/Vs values of the Moho beneath 153 seismic stations are obtained by stacking P-to-S converted phases from the Moho and gravity modeling. The resulting crustal thickness generally decreases from the northwest to the south-east, from about 60 km in the Bayan Har Block to 30 km in the Sichuan Basin. The crustal Vp/Vs measurements in the Qinling Orogenic Belt, Bayan Har Block, Chuxiong Basin, and Yangtze Platform indicate an overall intermediate to felsic crustal composition. With a relatively thick …

Security Risk Assessment In Cloud Computing Domains, Amartya Sen

Doctoral Dissertations

"Cyber security is one of the primary concerns persistent across any computing platform. While addressing the apprehensions about security risks, an infinite amount of resources cannot be invested in mitigation measures since organizations operate under budgetary constraints. Therefore the task of performing security risk assessment is imperative to designing optimal mitigation measures, as it provides insight about the strengths and weaknesses of different assets affiliated to a computing platform.

The objective of the research presented in this dissertation is to improve upon existing risk assessment frameworks and guidelines associated to different key assets of Cloud computing domains - infrastructure, applications, …

Direct Printing Of Single-Crystal Silicon By Microscale Nanoparticle Printing And Confined Laser Melting And Crystallization, Wan Shou

Doctoral Dissertations

"The transport and interfacial phenomena in laser melting and crystallization of silicon in micro-/nano-scale confinement lacks sufficient understanding. Uncovering the underlying mechanisms, and hence harness the melting and crystallization processes can help the formation of controllable single-crystal structures or patterns. In this dissertation, a molecular dynamics (MD) simulation was conducted to calculate the interfacial free energy of the silicon system in contact with flat and structured walls. Then the calculated interfacial energies were employed to predict the nucleation mechanisms in a slab of liquid silicon confined by two walls and compared with MD simulation results. Further, in combination with a …

Investigation Of Additively Manufactured Polymer And Transparent Polymer Composites, Gregory Taylor

Doctoral Dissertations

"The objective of this study is an investigation of both the characterization of fused deposition modeling (FDM) of polymer thermoplastics and the manufacture of glass-reinforced transparent composites. The flexural behavior and fracture toughness of FDM parts are critical for the evaluation and optimization of both material and process. This study focuses on the performance of FDM Ultem 1010 specimens intended to be used as composite tooling due the material's high heat resistance. A three-point bend test is performed for flexure properties while a single edge notch bend test is performed for fracture toughness. For each of the tests, the build …

Atomic Layer Deposition Prepared Nanostructured Materials For Various Catalytic Reactions, Xiaofeng Wang

Doctoral Dissertations

"Atomic layer deposition (ALD) has been widely used for thin film coating and metal nanoparticles (NPs) preparation. In this report, the applications of ALD prepared nanostructured materials in catalysis were examined.

Highly dispersed Pt monometallic catalysts with different substrates and multi-walled carbon nanotubes (MWCNTs) supported Pt-Co bimetallic catalysts were synthesized by ALD for selective hydrogenation of α, β-unsaturated aldehydes to unsaturated alcohols (UA). Pt/MWCNTs showed the highest selectivity of UA in selective hydrogenation of citral, as compared to Pt/SiO₂, Pt/ALD-Al₂O₃, and Pt/γ-Al₂O₃. After adding Co, the highest selectivity was achieved …

Long-Term Behavior Of Fiber Reinforced Polymer (Frp) Confined Concrete Cylinders Subjected To Severe Weather And Seawater Solution Conditions, Song Wang

Doctoral Dissertations

"This study presents an experimental investigation on durability of fiber-reinforced polymer (FRP) confined concrete cylinders subjected to various environmental conditions. Two types of cylinders were tested in this experiment: concrete-filled FRP tube (CFFT) and hollow-core FRP-concrete-steel (HC-FCS), with FRP tubes having two different constitutive resin components: polyester and epoxy. The specimens were subjected to three different environmental conditions: combined freeze/thaw, wet/dry and heating/cooling cycles with options of continuous water immersion and sustained axial load in an environmental chamber, UV exposure in an UV chamber, and seawater immersion in water tanks with sustained axial load. Mechanical and material characterization tests were …

Modeling And Control Of Probe-On-Probe Dynamics In Dual-Probe Atomic Force Microscopy, Ayad Al-Ogaidi

Doctoral Dissertations

“The atomic force microscope (AFM) is a widely used instrument for imaging and direct manipulation of materials and particles at the nanoscale. The AFM uses a probe, which is a microcantilever with a sharp point at the end. Typically, the AFM is constructed with a single probe. The disadvantage of this construction is that it can only be used either for imaging or manipulation in one implementation. An AFM was constructed using two probes, permitting simultaneous imaging and manipulation. A dual-probe AFM (DP-AFM) provides a foundation for feedback controlled manipulation.

Paper I investigates probe-on-probe contact stability and examines the dynamics …

Design For Optical Metamaterial Design For Optical Metamaterial Absorber, Huixu Deng

Doctoral Dissertations

“Optical metamaterlal (MM) absorbers in the visible or near-infrared range have been widely investigated in these years since they are crucial in many promising applications, such as solar energy harvesting systems, thermo-photovoltaic energy conversion devices, thermal imaging and emissivity control. This dissertation aims to design and investigate various optical metamaterial absorbers based on different mechanisms and theories, such as cavity resonance, impedance match, equivalent circuit model and waveguide stop light mode. First, via utilizing the cavity resonance, a tunable narrowband MM absorber/emitter for thermophotovoltaic (TPV) is designed and analyzed based on gold nanowire cavities to improve the overall efficiency of …

Ferrite Assisted Geometry-Conformal Magnetic Induction Antenna And Subsea Communications For Auvs, Debing Wei, Li Yan, Xuanheng Li, Jie Wang, Jiefu Chen, Miao Pan, Yahong Rosa Zheng

Electrical and Computer Engineering Faculty Research & Creative Works

This paper designs a novel geometry-conformal antenna for Magnetic Induction (MI)-based subsea wireless communications for autonomous underwater vehicles (AUV). The designed tri-directional antennas can be wrapped directly on the surface of AUVs, such that the AUVs fluid dynamics are well maintained to ensure power efficiency of the vehicles. In addition, ferrite materials are added between the MI antenna and the metallic body surface of the AUVs to overcome the shielding effect and enhance the MI signal strength. The designed MI communication system is implemented in hardware and the effectiveness of the geometry-conformal MI antenna is demonstrated through COMSOL simulations and …

Investigation Of High Indium-Composition Ingan/Gan Heterostructures On Zno Grown By Metallic Organic Chemical Vapor Deposition, M. Tian, Y. D. Qian, C. Zhang, L. Li, S. D. Yao, I. T. Ferguson, D. N. Talwar, J. Y. Zhai, D. H. Meng, K. Y. He, L. Y. Wan, Z. C. Feng

Electrical and Computer Engineering Faculty Research & Creative Works

The optical properties and film quality for a series of high-In composition InGaN films grown on ZnO substrate by metal-organic chemical vapor deposition (MOCVD) are characterized by using high resolution X-ray diffraction (HRXRD), Rutherford backscattering (RBS), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL), and Raman scattering spectroscopy (RSS). The In composition is evaluated by analyzing the RBS and PL emission spectra. The XPS measurements revealed the diffusion of Zn atoms from the substrate into InGaN films. All the analyses of experimental measurements have shown that the growth temperature played an important role in indium composition as well as of film quality. …

Synchrotron Radiation X-Ray Absorption Spectroscopy And Spectroscopic Ellipsometry Studies Of Insb Thin Films On Gaas Grown By Metalorganic Chemical Vapor Deposition, Yingda Qian, Yuanlan Liang, Xuguang Luo, Kaiyan He, Wenhong Sun, Hao Hsiung Lin, Devki N. Talwar, Ting Shan Chan, Ian Ferguson, Lingyu Wan, Qingyi Yang, Zhe Chuan Feng

Electrical and Computer Engineering Faculty Research & Creative Works

A series of ultrathin InSb films grown on GaAs by low-pressure metalorganic chemical vapor deposition with different V/III ratios were investigated thoroughly using spectroscopic ellipsometry (SE), X-ray diffraction, and synchrotron radiation X-ray absorption spectroscopy. The results predicted that InSb films on GaAs grown under too high or too low V/III ratios are with poor quality, while those grown with proper V/III ratios of 4.20-4.78 possess the high crystalline quality. The temperature-dependent SE (20-300°C) and simulation showed smooth variations of SE spectra, optical constants (n, k, e1, and ϵ2), and critical energy points (E1, E1+Δ1, E′0, E2, and E′1) for InSb …

Data Analysis Of Low-Salinity Waterflooding To Enhance The Oil Recovery In Sandstone Reservoirs, Nadia Ariani

Masters Theses

"The lack of a single reasonable general mechanism to describe how low-salinity waterflooding can improve oil recovery in both laboratory and field pilot projects has increased the interests of many researchers and stakeholders. There has not been observed the relationship of formation brine salinity and injected brine salinity to see how much salinity is reduced to produce the maximum enhanced oil recovery by LSWF. There is no guidance in what EOR stage the LSWF is best implemented. This work collects data from various published literature to develop a comprehensive data set regarding low-salinity waterflooding in sandstone reservoirs. The LSWF mechanisms …

A Novel Power Integrity Modeling Method Based On Plane Pair Peec, Siqi Bai

Masters Theses

"A low impedance power distribution network (PDN) is essential for high frequency integrated circuits. A novel modeling mothed, i.e. the plane pair PEEC method is proposed in this thesis to model the PDN of the multi-layered printed circuit board. The modeling results agrees favorably with full wave simulation and measurement. A PDN tool is develop based on this method"--Abstract, page iii.

Facile Synthesis Of Nanostructured Metal Borides And Composites For Applications In Sustainable Energy, Maalavan Arivu

Masters Theses

"Electrocatalytic water splitting is a promising solution for sustainable energy generation since one of the half reactions lead to the formation of H₂ which is a clean fuel. The other half of the reaction leading to O₂ evolution is an energy intensive process necessitating the need for an electrocatalyst to break the activation barrier for the commencement of the reaction. In this work we will focus on expanding the family of non-oxidic OER electro-catalysts, especially borides, whereby, apart from facilitating delocalization of electron cloud on the catalytically active transition metal site, low anion electronegativity and increased covalency in …

De-Embedding Method Comparisons And Physics Based Circuit Model For High Frequency D-Probe, Yuan Chen

Masters Theses

"In section 1, the procedures of 1X-Reflect smart fixture de-embedding (SFD), 1-port auto fixture removal (AFR), and 2X-Thru SFD are compared from various perspectives: test fixture design, the de-embedding procedure, and de-embedded results. The accuracy of fixture characterization and the de-embedded result is the key figure of merit (FOM) in each de-embedding method. Full wave models are built to evaluate the FOM of the three methods, by comparing the scattering parameters (S-parameters) and time domain reflectometer (TDR). A test coupon for measuring USB-C cables is adopted to serve as a manufactured validation purpose.

In section 2, a physics-based circuit model …

Bioaccessibility Of Lead From Contaminated Soil Using Phosphate Treatment -- Physiologically Based Extraction Test And In Vitro Gastrointestinal Method Test, Austin Charles Doss

Masters Theses

"Phosphate treatments are used to immobilize lead in soil by forming pyromorphite. Soil from Bonne Terre, Mo was collected to study whether such treatment decreases the bioaccessibility of lead. The soil was treated using 0.5 soil wt% of phosphate. Treatments were: none, phosphoric acid, triple super phosphate, and organic bone meal. Each sample was studied after one, four, sixteen, and twenty weeks; during this time span, water was added approximating the average rainfall rate. Percolated water was collected to test the leached phosphate concentrations. Phosphate was below the detection limit in that leachate. Remediated soil samples were used in Physiologically …

An Integrated Method For Understanding The Fluid Flow Behavior And Forecasting Well Deliverability In Gas Condensate Reservoirs With Water Aquifer Drive, Abdulaziz Mustafa Em. Ellafi

Masters Theses

"Gas condensate reservoirs constitute a significant portion of global hydrocarbon reserves. In these reservoirs, as bottomhole pressure falls below the dew point, liquid develops in the pore space. This results in the formation of a liquid bank near the wellbore region that decreases gas mobility, which then reduces gas inflow. Some gas condensate reservoirs have bottom aquifer drive, which also negatively impacts gas production. This research used a field case study to demonstrate an integrated workflow for forecasting well deliverability in a gas condensate field in Libya. The workflow began with the interpretation of open-hole log data to identify the …

Battery Optimization In Microgrids Using Markov Decision Process Integrated With Load And Solar Forecasting, Prateek Jain

Masters Theses

"Rising climatic concerns call for unconventional/renewable energy sources which reduce the carbon footprint. Microgrids that integrate a variety of renewable energy resources play a key role in utilizing these energy resources in a more efficient and environmentally friendly manner. Battery systems effectively help to utilize these energy resources more efficiently. This research work presents a framework based on Markov Decision Process (MDP) integrated with load and solar forecasting to derive an optimal charging/discharging action of Battery with rolling horizon implementation. The load forecasting regression models are discussed and developed. Also, various solar forecasting models like clear sky, multi-regression and Non-Linear …

Examination Of Shear Friction Design Provisions, Nikkolas J. Edgmond

Masters Theses

"This thesis reports the results of research conducted to establish a state-of-the-art database of shear-friction studies to be turned over to ACI Committee 445-0D as a living document, utilize a subset of the established database to examine the effectiveness of the ACI 318 Code (2014), PCI Design Handbook (2010), AASHTO LRFD Bridge Design Specification (2016) and CSA A23.3 Design of Concrete Structures Standard (2014) provisions to predict shear transfer strength, and examine the effective coefficient of friction (µ_e) approach allowed in the PCI Design Handbook (2010).The shear friction design concept is applicable in conditions where direct shear must …

Effect Of Variation Of Parameters On Biogas Production Using Aspen Plus & Dynamic Simulation Using Mimic, Shruti Shrikant Karambelkar

Masters Theses

"Design and management for Biogas production have gained significance in growing dependency on Renewable energy resources. This would need a detailed information on steady state and dynamic behavior of systems. In order to make this process environmentally ecofriendly, its needs a lot of improvisation on process simulation. Anaerobic digestion helps treat this inefficient water to be converted into water fit for effluent purposes.

Byproducts contain consists of organic, inorganic and wastes which lead to a high COD content and thus, cannot be discarded into the outlets. The anaerobic digestion process. A study of these effects with simulation need to be …

Multi-Objective Optimal Battery Placement In Distribution Networks, Kiana Khalilnejad

Masters Theses

"Due to high penetration of renewable energy resources in today's electricity generation, considerable voltage fluctuations are witnessed in power systems. As an attempt to solve this issue, in this study, multi-objective optimal placement and sizing of distribution-level battery storage system is performed using semidefinite programing. Placement of one or multiple battery system is studied under various objectives including the cost, voltage regulation, reactive power dispatch, renewable resource curtailment, and minimum network power losses. Power flow equations are solved in the form of semidefinite constraints and the rank constraint is ignored. Additionally, combination of these objectives to form a multi-objective problem …

Methodology For 3d Full-Wave Simulation Of Electrostatic Breakdown Across An Air Gap, Darwin Zhang Li

Masters Theses

"The Rompe-Weizel SPICE model is used to obtain the time dependent arc resistance during simulation of air gap discharge. The SPICE model is solved using a circuit simulator, and the accompanying 3D model is solved using the transmission-line matrix time domain numerical method. Transient co-simulation is a new technique that is used to solve both circuit and 3D models at the same time. Transient co-simulation with the Rompe-Weizel SPICE model is first validated for different arc lengths using a simple geometry of a rod discharging to a ground plane. Validation is achieved by comparing the discharge currents from simulation with …

Cloud Transactions And Caching For Improved Performance In Clouds And Dtns, Dileep Mardham

Masters Theses

"In distributed transactional systems deployed over some massively decentralized cloud servers, access policies are typically replicated. Interdependencies ad inconsistencies among policies need to be addressed as they can affect performance, throughput and accuracy. Several stringent levels of policy consistency constraints and enforcement approaches to guarantee the trustworthiness of transactions on cloud servers are proposed. We define a look-up table to store policy versions and the concept of "Tree-Based Consistency" approach to maintain a tree structure of the servers. By integrating look-up table and the consistency tree based approach, we propose an enhanced version of Two-phase validation commit (2PVC) protocol integrated …

Nonlinear Finite Element Analysis Of Concrete Columns Subjected To Complex Loading, Adam Christopher Morgan

Masters Theses

"This study details the development and implementation of a finite element model within a commercial finite element code, Abaqus CAE, for the analysis of reinforced concrete (RC) bridge columns containing interlocking spirals subjected to combined loading conditions including axial, shear, bending, and torsional loads, including the post-peak response. The model is a first of its kind attempt at simulating the response of RC columns with continuous spiral transverse reinforcement and subjected to combined loading conditions including torsion. The model is utilized to determine the quasi-static load-deformation response under various proportions of the input loads and displacements. The resulting quasi-static load-deformations, …

Characterization Of Ionic Liquid Monopropellants For A Multi-Mode Propulsion System, Alex J. Mundahl

Masters Theses

"Multi-mode micropropulsion is a potential game-changing technology enabling rapidly composable small satellites with unprecedented mission flexibility. Maximum mission flexibility requires one shared propellant between the chemical and electric systems. A deep eutectic 1:2 molar ratio mixture of choline-nitrate and glycerol ([Cho][NO₃] - glycerol) is investigated as a fuel component in a binary mixture propellant for such a multi-mode micropropulsion. Specifically, binary mixtures of the novel ionic liquid fuel with hydroxyl-ammonium nitrate (HAN) and ammonium nitrate (AN) are considered and compared against the previously investigated propellant [Emim][EtSO₄]-HAN. Chemical rocket performance simulations predict this new propellant to have …