Digital Commons Network^™

Laser Sintering And Aerosol Printing Of Conductive Nanoparticles, Mahati Guntupalli

Masters Theses

"Fabrication and printing of nanoparticles is an essential step in the manufacturing of low cost- high efficiency electronic devices. High material costs of noble metal particles necessitates the investigation for a potential substituent. Conventional methods of manufacturing are time consuming and uneconomical, thus intense research is being done to employ new methods for cost, time and space effective manufacturing process.

The first part of the thesis presents the fabrication of Copper nanoparticles. As an economical substituent for noble metal nanoparticles, Copper nanoparticles satisfy various properties as conductive inks, simultaneously suffering from the vital problem of oxidation. The acceleration effects of …

Mitigation Of Glass Weave Skew Using A Combination Of Low Dk Spread Glass, Multi-Ply Dielectric And Routing Direction, Kartheek Nalla

Masters Theses

"As the data rates increase into the multi-gigabit range, the bit periods fall in the range of few tens of picoseconds. At above few Gbps, it becomes very important to reduce skew between differential pairs as it can adversely impact the signal eye and thereby increase bit error rate. The goal of this study is to mitigate the skew contributed by woven glass fabric of PCB dielectrics.

The glass weave skew between differential pairs in a PCB occurs due to the difference in dielectric constants (DK) of glass and resin. This thesis aims to mitigate the skew by reducing the …

Oxidative Dehydrogenation Of Light Alkanes With Carbon Dioxide, Marktus A. Atanga

Masters Theses

”Most experts studying the global ecosystem and climate suggest that rising anthropogenic CO₂ emissions have contributed to significant global climate change in the last half-century. The development of effective strategies that convert CO₂ into energy, fuels, and chemicals are greatly preferable to oceanic or geologic sequestration options because they offer the potential to create new commercially-viable products from renewable carbon feedstock. On the other hand, the selective oxidative dehydrogenation of light alkanes (C₂-C₄) to corresponding olefins, methane reforming, and methane coupling are the major challenges for producing valuable and versatile feedstocks. The oxidative dehydrogenation …

Thresholding Techniques For Discrimination Of Seborrheic Keratosis From Melanoma In Dermoscopy Images, Pramada Kishtagari

Masters Theses

“Malignant melanoma is a very deadly form of skin cancer which has claimed many lives over the past few years. If detected early this can be cured, hence early detection of malignant melanoma is essential. Unfortunately melanoma is mimicked by seborrheic keratosis, a benign skin cancer. Identifying malignant melanoma as seborrheic keratosis using clinical diagnosis can prove fatal to the patient. To prevent such errors, dermoscopy, a common non-invasive skin imaging technique, is used which improves the diagnosis of these pigmented lesions by visualizing the morphological structures. This study proposes an automatic method by applying image processing techniques to aid …

Gravity And Magnetic Investigations Of The North-Eastern Kansas Section Of The Midcontinent Rift System, Ozgun Kamil Sahin

Masters Theses

"The Midcontinent Rift System (MRS) is a major Precambrian magmatic province on the North American continent. It formed when the North American craton began to split apart during the Mesoproterozoic era (1,100 Ma). As a result of the extension and possibly the effects of a rising mantle plume, a thick layer of basalt and numerous reverse and normal faults were formed. The basalt layer is buried below sedimentary formations and makes it difficult for seismic techniques to image. On the other hand, gravity and magnetic methods can be utilized for focused depths, and the basalt layer of the system can …

Mechanics Of Impulse Force Reduction For Mitigating Dump Truck Vibrations Under Hislo Conditions, Danish Ali

Masters Theses

"The deployment of large capacity shovels and dump trucks, for achieving economic bulk production capacities, has resulted in high impact shovel loading operations (HISLO). These large shovels generate high impact forces when loading dump trucks with over 100-ton passes under gravity. The impact forces also generate high frequency shock waves, which cause severe truck vibrations, and thus, expose dump truck operators to high levels of whole body vibrations (WBV). The dynamic impact force generates these vibrations, and thus, there is a need to develop efficient technologies to eliminate or reduce its impact. Existing literature and industry practice show that this …

Tracking Silver, Gold, And Titanium Dioxide Nanoparticles Through Drinking Water Systems By Single Particle - Inductively Coupled Plasma - Mass Spectrometry, Ariel Renee Donovan

Masters Theses

"Single particle (SP)-ICP-MS methods were developed to characterize and quantify Ti-containing, titanium dioxide, silver, and gold NP concentration, size, size distribution and dissolved metal element concentration in surface water and treated drinking water. The effectiveness of conventional drinking water treatments (including lime softening, alum coagulation, filtration, and disinfection) to remove NPs from surface water was evaluated using six-gang stirrer jar test simulations. Six-gang stirrers were used to simulate drinking water treatments including lime softening, alum coagulation, powdered activated carbon sorption, filtration, and disinfection by free chlorine. Lime softening effectively removed most nanoparticles added. Source and drinking waters from three large …

The Mantle Transition Zone Beneath South America From Stacking Of P-To-S Receiver Functions, B. A. Goetze

Masters Theses

"The Mantle Transition Zone (MTZ) beneath South America is investigated with stacking of Receiver Functions (RFs) of converted P-to-S phases from the velocity discontinuities at 410 km (d410) and 660 km (d660). A total of 785 seismic stations provided 22,235 high quality RFs, allowing 1,717 MTZ thickness measurements in circular bins of 2⁰ radius. An apparent MTZ structure is derived using the IASP91 reference model, where the d410 mean depth is 409.1 km and the d660 is 661.5 km, and the mean MTZ thickness is 251.8 km. This model presents coherent depressions and uplifts of the discontinuities matching well known …

Effect Of Sparse-Build Internal Structure On Performance Of Fused Deposition Modeling Parts, Shixuan Meng

Masters Theses

"Fused deposition modeling (FDM) technology has been used in additive manufacturing for years and is able to significantly reduce both manufacturing time and cost for production tooling and end-use parts. Autoclave molding is one of the conventional tools used to produce composite parts. In autoclave molding, the soft composite material is positioned on the molding tool, and then subjected to vacuum and elevated temperatures to facilitate the curing of the resin. With additive manufacturing (AM), it is possible to fabricate the molding tool with a sparse internal structure, thereby reducing the fabrication time and cost compared to a solid tool. …

Measurements And Simulation Of Conductor-Related Loss Of Pcb Transmission Lines, Oleg Kashurkin

Masters Theses

"With continuously increasing data rates Signal Integrity (SI) problems become more and more challenging. One of the main issues in high-speed data transfer is the frequency-dependent loss of transmission lines. This thesis is dedicated to conductor-related loss mechanisms in printed circuit board (PCB) transmission lines.

This thesis provides the experimental investigation of conductor properties used for fabrication of PCBs. Particularly, the resistivity and conductivity along with the temperature coefficients of eleven copper types is measured and reported. A four probe measurement technique is used. Results were verified by two independent measurements and show discrepancy of less than 0.5%.

Another major …

Assessing Downstream Stormwater Impacts For Urban Watershed Planning, Johanna Meyer Pavlowsky

Masters Theses

"The urbanization of watersheds has caused debilitating effects to downstream aquatic ecosystems in catchments and streams. The implementation of green infrastructure (GI), such as permeable pavements and bioretention facilities, has been shown to alleviate these effects by both reducing runoff and mitigating pollutants; however, the implements are often not designed with a specific goal of water improvement. This study targets understanding a small, impaired urban watershed, and the benefits green infrastructure may have to provide environmental, social, and economic improvement to the watershed.

Portions of Rolla including much of the S&T campus drain into the impaired urban waterbody Frisco Lake, …

Material Properties Affecting The Penetration Of Metal Targets By Copper Linear Shaped Charges, Kevin Lee Phelps

Masters Theses

"A linear shaped charge (LSC) is an explosive device used in demolition, aerospace, and in other applications that require the cutting of metal. Users of LSC's typically know the size of shaped charge needed to cut their target but commonly encounter previously untested materials. The motivation for this thesis is to provide an understanding as to what target material properties are good indicators of cutting performance so the selection of LSC can be more efficient. The author found that penetration theories for other types shaped charges were insufficient for the LSC, possibly because of the relatively slow projectile created by …

A Meta-Architecture Analysis For A Coevolved System-Of-Systems, George Anthony Muller Iv

Masters Theses

"Modern engineered systems are becoming increasingly complex. This is driven in part by an increase in the use of systems-of-systems and network-centric concepts to improve system performance. The growth of systems-of-systems allows stakeholders to achieve improved performance, but also presents new challenges due to increased complexity. These challenges include managing the integration of asynchronously developed systems and assessing SoS performance in uncertain environments.

Many modern systems-of-systems must adapt to operating environment changes to maintain or improve performance. Coevolution is the result of the system and the environment adapting to changes in each other to obtain a performance advantage. The complexity …

Application Of Embedded Frequency Selective Surfaces For Structural Health Monitoring, Dustin Franklin Pieper

Masters Theses

"This thesis proposes the use of Frequency Selective Surfaces (FSSs) as an embedded structural health monitoring (SHM) sensor. FSSs are periodic arrays of conductive elements that filter certain frequencies of incident electromagnetic radiation. The behavior of this filter is heavily dependent on the geometry of the FSS and local environment. Therefore, by monitoring how this filtering response changes when the geometric or environmental changes take place, information about those changes may be determined. In previous works, FSS-based sensing has shown promise for sensing normal strain (a stretching or compressing geometrical deformation). This concept is extended in this thesis by investigating …

A Cost Benefit Analysis Of Sst Based Volt-Var Control, Guruprasad Ramani

Masters Theses

"The overall objective of this thesis work is to improve system power quality with the help of solid state transformers (SSTs). Two methods to improve the system power quality are explored: a) achieving a unity power factor at all the load buses, and b) improving the system voltage profile to meet a desired voltage regulation requirement of 0.95

Numerical Analysis Of Flexural Slip During Viscoelastic Buckle Folding, Davi Rodrigues Damasceno

Masters Theses

"Flexural slip is considered to be an important folding mechanism contributing in the development of different folds such as chevron, and kink-band buckle folds. Various filed studies have provided a general conceptual and qualitative understanding of flexural slip. However, quantitative evidence of the importance of the flexural slip mechanism during fold evolution is sparse, as the actual amount of surface parallel displacement, and timing, is difficult to measure accurately, due to the lack of suitable strain markers.

In this study 2D finite element analysis is used to overcome these disadvantages and to simulate flexural slip during viscoelastic buckle folding. Variations …

On The Double Chain Ladder For Reserve Estimation With Bootstrap Applications, Larissa Schoepf

Masters Theses

"To avoid insolvency, insurance companies must have enough reserves to fulfill their present and future commitment-refer to in this thesis as outstanding claims towards policyholders. This entails having an accurate and reliable estimate of funds necessary to cover those claims as they are presented. One of the major techniques used by practitioners and researchers is the single chain ladder method. However, though most popular and widely used, the method does not offer a good understanding of the distributional properties of the way claims evolve. In a series of recent papers, researchers have focused on two potential components of outstanding claims, …

Yik Yak Posts: A Discourse Analysis, Snehal Ravindra Shirke

Masters Theses

"Anonymity and geolocation create a unique environment for users to communicate with each other. Discourse analysis was conducted to study the posts made on Yik Yak, an anonymous social networking mobile application to understand the communication patterns on an anonymous platform and the posts about taboo topics. The posts were analyzed specifically for patterns on taboo topics and how students interact on the anonymous platform on a particular campus (Missouri S&T campus). Student research assistants coded the collected posts into the pre-defined taboo categories namely sexual activity, non-sexual bodily functions, sexual orientation, mental/emotional health, and "other" taboo topics. I found …

Reprocessing And Structural Interpretation Of Multichannel Seismic Reflection Data From Penobscot, Nova Scotia, Fulya Gizem Yagci

Masters Theses

"Penobscot area is located in the Scotian Basin, which was occurred as a result of extension in the eastern North America border. 2-D data set that was utilized for the study consists of three multichannel seismic profiles that were collected from Penobscot Parcel 8. The main purpose of the study was to enhance signal-to-noise ratio of the seismic reflection sections suppressing high frequency noise and multiples, and removing diffractions. In addition, while the resolution of the sections were enhanced, determining the correct processing techniques and parameters for better results was the another important criteria.

The processing steps included deconvolution, minimum …

Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang

Masters Theses

"The offshore Nile Delta is characterized by variations of the maximum horizontal stress orientation in subsalt and supra-salt sequences. Margin-parallel SH, typical for tertiary deltas, is observed for regions that are below or do not contain evaporites. In sequences underlain by evaporates pre-dominantly margin-normal SH is observed. This observation yielded the first conclusive in situ evidence that salt acts as a mechanical detachment layer. In this study, 3D finite element analysis (FEA) is used to simulate the total stress distribution in the offshore Nile Delta featuring evaporate sequences. Several parameters such as different salt sequence geometries, friction coefficient on faults, …

Study On The Applicability Of Relative Permeability Modifiers For Water Shutoff Using Numerical Simulation, Dheiaa Khafief Khashan Alfarge

Masters Theses

"Water production is a challenging problem to be controlled during hydrocarbon-reservoirs production life. Disproportionate Permeability Reduction (DPR) is often used as water shutoff treatment in production wells when other conventional solutions like mechanical isolations are difficult to perform. This study applied numerical simulation methods to diagnose the factors impacting DPR treatment success on macroscopic level and to see when, where and at which conditions DPR treatment can give best results.

This work indicated that the following points should be considered before DPR treatment is executed in any reservoir to get a successful treatment. Firstly, this research explored that DPR performance …

Mixing Dynamics In Municipal Water Storage Tanks, Pramod Narayan Bangalore

Masters Theses

"The purpose of this study is to investigate the effects of different control variables on mixing in municipal water storage tanks using Computational Fluid Dynamics(CFD) solutions with ANSYS FLUENT for isothermal, positively and negatively buoyant inflow conditions. Poor mixing of old water and new water leads to dead zone formation, which when introduced in the distribution system can cause major water quality issues. Data for this study was generated using Multiphase CFD flow modeling technique using Volume of Fluid (VOF) approach with species transport. The vessel was considered to be mixed when Coefficient of Variation (COV) dropped below 0.10.

Results …

Automated Design Of Boolean Satisfiability Solvers Employing Evolutionary Computation, Alex Raymond Bertels

Masters Theses

"Modern society gives rise to complex problems which sometimes lend themselves to being transformed into Boolean satisfiability (SAT) decision problems; this thesis presents an example from the program understanding domain. Current conflict-driven clause learning (CDCL) SAT solvers employ all-purpose heuristics for making decisions when finding truth assignments for arbitrary logical expressions called SAT instances. The instances derived from a particular problem class exhibit a unique underlying structure which impacts a solver's effectiveness. Thus, tailoring the solver heuristics to a particular problem class can significantly enhance the solver's performance; however, manual specialization is very labor intensive. Automated development may apply hyper-heuristics …

Hybrid Manufacturing Processes For Fusion Welding And Friction Stir Welding Of Aerospace Grade Aluminum Alloys, Megan Alexandra Gegesky

Masters Theses

"Friction stir welding and processing can provide for joints in aerospace grade aluminum alloys that have preferable material properties as compared to fusion welding techniques. Aerospace grade aluminum alloys such as AA2024-T3 and AA7075-T6 are considered non-weldable by traditional fusion welding techniques. Improved mechanical properties over previously used techniques are usually preferable for aerospace applications. Therefore, by combining traditional fusion welding and friction stir processing techniques, it could be plausible to create more difficult geometries in manufactured parts instead of using traditional techniques. While this combination of fusion welding and friction stir processing is not a new technology, its introduction …

Mixed Metal Oxide Catalysts Supported On H-Beta For Hydrogenolysis Of Glycerol Into 1,3-Propanediol, Amit Kant

Masters Theses

"Bioglycerol is the by-product which is produced largely from the microbial fermentation, hydrogenolysis of glucose in the mixture of polyols, fatty ester, soap manufacturing process and fatty acid production. Hydrogenolysis of glycerol is one of the most promising ways to convert glycerol and many work has been done towards 1,3-propanediol, 1,2-propanediol and 1-propanol using various metals and mixed-metal oxides such as W, Ru, Rh, Pt, Pd, Cu, Ni and different zeolites have been extensively used as the active components.

It has been well documented that the presence of Bronsted acid sites leads to the formation of acrolein, while Lewis acid …

Influence Of Mix Design Parameters On Dynamic Segregation Of Self-Consolidating Concrete And Consequences On Performance Of Precast Beams, Aida Margarita Ley Hernandez

Masters Theses

"Self-Consolidating Concrete (SCC) is more vulnerable to stability problems as a consequence of its high flowing ability compared to conventional vibrated concrete. Dynamic segregation refers to the tendency of the concrete constituents to separate from the suspended matrix, usually in horizontal direction while being cast into the formwork or due to an impact. Similarly to static segregation, dynamic segregation can affect the homogeneity of SCC. Therefore, it is highly essential to ensure a proper dynamic stability in order to enhance the uniformity of in-situ properties of pre-stressed beams.

In this research project, the effects of SCC mix design parameters are …

Study Jitter Amplification Of A Passive Channel And Investigation Of S₂₁ Magnitude Extraction Methodologies Using A Pattern Generator And Oscilloscope, Xinyun Guo

Masters Theses

"Recently the clock channel jitter amplification has been observed in several publications. Currently in many high-speed I/O systems, to avoid the cost and the complex clock recovery circuit design, people use traces forwarding clock signal from transmitting IC to receiving IC. When these clock traces are long enough, the amount of attenuation will induce not only inter-symbol-interference (ISI) but also modulate with the input jitter. Eventually it will lead some type of jitter been amplified after the channel. Similarly, the high speed communication channel (data channel) will also face this issue. Since there are no studies on the jitter amplification …

Thrust Sensing For Small Uavs, Christopher Scott Marchman

Masters Theses

"Unmanned aerial vehicles (UAVs) have become prevalent in both military and civilian applications. UAVs have many size categories from large-scale aircraft to micro air vehicles. The performance, health, and efficiency for UAVs of smaller sizes can be difficult to assess and few associated instrumentation systems have been developed. Thrust measurements on the ground can characterize systems especially when combined with simultaneous motor power measurements. This thesis demonstrates the use of strain measurements to measure the thrust produced by motor/propeller combinations for such small UAVs. A full-bridge Wheatstone circuit and electrical resistance strain gauges were used in conjunction with constant-stress cantilever …

Developing An Idealistic Model To Characterize And Optimize A Photovoltaic Battery Systems, Pavani Reddy Nalladimmu

Masters Theses

"Solar energy is one of the most abundant and clean energy sources of renewable energy. Due to its unsteady nature, most photovoltaic systems require a solar storage system. Ultracapacitors have proven to be an effective solar energy storage component due to their wide range of input voltages and high power density. This research focuses on characterizing the performance of a PV/UCAP hybrid storage system to meet required household loads at various locations throughout the US as a backup energy source. A calibrated empirical model was developed to characterize system performance. A load profile was designed based on a typical 2 …

Intensity Control Of Dielectric Barrier Discharge Filaments, Matthew Crawford Paliwoda

Masters Theses

"When operated in a filamentary mode, a volume dielectric barrier discharge (DBD) is known to produce patterned plasma structures. These structures are currently being explored for reconfigurable metamaterial applications. In this work the presence and intensity of a single filament, within an array of filaments, was controlled by adjusting the voltage to that filament's individual needle electrode. The current, voltage, and time-averaged normalized light intensity were measured while varying the voltage of the needle through a self-biasing resistance. For a 7.5 kV, 3.2 kHz DBD in air, the needle-controlled filament intensity varies from that of the surrounding filaments to zero …