Digital Commons Network^™

Computing And The Electrical Transport Properties Of Coupled Quantum Networks, Casey Andrew Cain

Doctoral Dissertations

In this dissertation a number of investigations were conducted on ballistic quantum networks in the mesoscopic range. In this regime, the wave nature of electron transport under the influence of transverse magnetic fields leads to interesting applications for digital logic and computing circuits. The work specifically looks at characterizing a few main areas that would be of interest to experimentalists who are working in nanostructure devices, and is organized as a series of papers. The first paper analyzes scaling relations and normal mode charge distributions for such circuits in both isolated and open (terminals attached) form. The second paper compares …

Nmr T₁ Studies Of Colloidal Unimolecular Polymer (Cup) Surface Water, Yousef Abobaker Dawib

Doctoral Dissertations

"This dissertation is subdivided into three topics: Experimental study of colloidal unimolecular polymer (CUP) hydration; probing of polymer chain dynamics by ¹³C solid state NMR technique; and the anticorrosive effect of 5-mercapto-1, 3, 4-thiadiazole-2(3H)-thione (MTT) derivatives.

The states of water in colloidal unimolecular polymer system were investigated by low field proton NMR. Bound and free water fractions were determined using spin-lattice relaxation measurements. A model equation was used to analyze the inversion recovery data.

The proton cross polarization and the pulse sequence for total spinning sideband suppression CP-TOSS NMR method were developed to determine the chain mobility of polymers …

Reliability-Based Optimization Design Of Geosynthetic Reinforced Embankment Slopes, Michelle (Mingyan) Deng

Doctoral Dissertations

"This study examines the optimization design of geosynthetic reinforced embankment slopes (GRES) considering both economic benefits and technical safety requirements. In engineering design, cost is always a big concern. To minimize the cost, engineers tend to seek an optimal combination of design parameters among the considered alternatives while ensuring the optimal solution is safe. Reliability-based optimization (RBO) is such a technique that provides engineers the optimal design with the minimum cost while all technical design requirements are satisfied. The research goal of this study is to implement a mathematical formulation algorithm of the RBO technique in GRES design. To achieve …

Shape Based Classification And Functional Forecast Of Traffic Flow Profiles, Wasim Kayani

Doctoral Dissertations

This dissertation proposes a methodology for traffic flow pattern analysis, its validation, and forecasting. The shape of the daily traffic flows are directly related to the commuter’s traffic behavior which merit analysis based on their shape characteristics. As a departure from the traditional approaches, this research proposed a methodology based on shape for traffic flow analysis. Specifically, Granulometric Size Distributions (GSDs) were used to achieve classification of daily traffic flow patterns. A mathematical morphology method was used that allows the clustering of shapes. The proposed methodology leads to discovery of interesting daily traffic phenomena such as five normal daily traffic …

Performance Analysis And Modelling Of Hybrid Photovoltaic-Thermal Solar Panels, Nicole C. Annis

Doctoral Dissertations

A photovoltaic-thermal (PVT) panel was constructed, tested, and modelled using both MATLAB and TRNSYS. During the experimental testing, which took place on the Missouri University of Science and Technology campus in Rolla, Missouri; two identical PVT panels were tested alongside two PV panels to gather an electrical baseline for comparison. Approximately 69 days’ worth of data were of data were collected during the summer of 2014. The PV electrical, PVT electrical, PVT thermal and PVT combined (electrical and thermal) efficiencies were 3.5-5.6%, 3.4-5.4%, 20.9-11.6%, and 24.3-17.0%, respectively.

A MATLAB program was developed using existing equations for one-dimensional, quasi-steady model of …

Combustion And Pollutant Characteristics Of Ic Engines Fueled With Hydrogen And Diesel/Hydrogen Mixtures Using 3d Computations With Detailed Chemical Kinetics, Hassan A. Khairallah

Doctoral Dissertations

In order to develop design guidelines for optimum operations of internal combustion engines fueled with alternative fuels, a comprehensive understanding combustion behavior and the pollutant formation inside the cylinder are needed. The first part of this thesis aimed to numerically study the engine performance and in-cylinder pollutant formation in a spark ignition engine fueled with hydrogen. Advanced simulations were performed using multi- dimensional software AVL FIRE coupled with CHEMKIN. The detailed chemical reactions with 29 steps of hydrogen oxidation with additional nitrogen oxidation reactions were also employed. Formation rates of nitrogen oxides (NOx) within the engine were accurately predicted using …

Accuracy Of Theory For Calculating Electron Impact Ionization Of Molecules, Hari Chaluvadi

Doctoral Dissertations

The study of electron impact single ionization of atoms and molecules has provided valuable information about fundamental collisions. The most detailed information is obtained from triple differential cross sections (TDCS) in which the energy and momentum of all three final state particles are determined. These cross sections are much more difficult for theory since the detailed kinematics of the experiment become important. There are many theoretical approximations for ionization of molecules. One of the successful methods is the molecular 3-body distorted wave (M3DW) approximation. One of the strengths of the DW approximation is that it can be applied for any …

The Radiation Physics, Mitigation Approaches And Design Guidelines Of High-Speed Connectors And Cables Analyzed With Numerical Modeling, Analytical Formulation And Measurements, Jing Li

Doctoral Dissertations

The dissertation is composed of three papers, which cover the radiation and mitigation of high-speed connectors and cables analyzed with full wave simulation, numerical modeling, analytical formulation and measurements.

In the first paper, the radiation from the optical cage connector in the frequency range of 4-28 GHz is analyzed with validated full-wave simulation model and analytical formulas. The radiation from the optical cage connector is suppressed with absorbing materials, and the coupling path in optical link is verified, together with the optical cage and module enclosure.

In the second paper, radiation from antenna-mode current and TL-mode current is briefly reviewed …

Modelling Of Interconnects In 3dic Based On Layered Green Functions, Siming Pan

Doctoral Dissertations

As traditional CMOS scaling pace gradually slows down, three-dimensional (3D) integration offers another dimension of in the ”More-than-Moore” era. In this dissertation, a number of investigations were conducted to better model interconnects in 3D integrated circuit (IC), to evaluate electrical behavior including delay, power consumption, signal integrity (SI), and power integrity (PI) for 3D ICs. Partial Element Equivalent Circuit (PEEC) method with layered Green’s function is studied here, since it consumes less computational resources and provides better physical insight to model the interconnects in 3DIC for high-speed digital circuits. The work is organized as a series of papers. The first …

Describing Local Community Acceptance With Discrete Choice Theory For Enhanced Community Engagement, Sisi Que

Doctoral Dissertations

This research sought to facilitate improved community (stakeholder) analysis by providing further insight on the determinants of local community acceptance using discrete choice theory. Specifically, the goals were to: (1) Identify, classify, and verify the important project characteristics and key demographic factors which affect local community acceptance of a mining project; (2) Account for the large number of relevant factors inherent in discrete choice experiments for mining community acceptance evaluation; and (3) Examine discrete choice models to select the most appropriate model for mining community consultation. The research will test the hypotheses that various discrete choice models can describe the …

Small Signal Modeling And Analysis Of Microgrid Systems, Md. Rasheduzzaman

Doctoral Dissertations

This dissertation focuses on small-signal modeling and analysis of inverter based microgrid systems. The proposed microgrid consists of two microsources placed on two different buses. The buses are connected using a distribution feeder with some impedance. The proposed microgrid can operate with the grid support, or without the grid support. When operated without the grid support, the standalone system’s microsources participate in controlling the system voltage and frequency. For a non-inertia source, such as the inverter, the load perturbations play an important role in system dynamics. In paper-I, such complex system was studied.

In the grid-tied mode, the microsources share …

Stability Design Criteria And Volt Var Control For Distribution System With Single Phase Solid State Transformers, Darshit Girishchandra Shah

Doctoral Dissertations

Due to recent advancements in semiconductor technology, power electronic converters for high voltage, high power, and high frequency applications will soon be commercially available. Conventional single phase distribution transformers are replaced by solid state transformers (SST) in a distribution test system to investigate their interactive dynamics. Under certain circumstances, instabilities due to harmonic resonance are observed. A design criterion for solid state transformer during no load conditions has been proposed in order to avoid instability using an impedance-based analysis. Stability assessment is also extended to include the impact of distribution system voltages and system wide impedance analysis. It is shown …

Investigation Of Robust Optimization And Evidence Theory With Stochastic Expansions For Aerospace Applications Under Mixed Uncertainty, Harsheel R. Shah

Doctoral Dissertations

One of the primary objectives of this research is to develop a method to model and propagate mixed (aleatory and epistemic) uncertainty in aerospace simulations using DSTE. In order to avoid excessive computational cost associated with large scale applications and the evaluation of Dempster Shafer structures, stochastic expansions are implemented for efficient UQ. The mixed UQ with DSTE approach was demonstrated on an analytical example and high fidelity computational fluid dynamics (CFD) study of transonic flow over a RAE 2822 airfoil.

Another objective is to devise a DSTE based performance assessment framework through the use of quantification of margins and …

Particle Gel Propagation And Blocking Behavior Through High Permeability Streaks And Fractures, Abdulmohsin Imqam

Doctoral Dissertations

Water channeling, one of the primary reservoir conformance problems, is caused by reservoir heterogeneities that lead to the development of high-permeability streaks and fractures. These streaks and fractures prevent large amounts of oil from being recovered. The ultimate objective of this research was to provide comprehensive insight into designing better particle gel treatments intended for use in large openings, including open fractures, high permeability streaks, and conduits to increase oil recovery and reduce water production.

An intensive laboratory study was conducted to better understand the injection and placement mechanisms of millimeter and micron size preformed particle gels (PPGs) through thief …

Development, Testing, And Analytical Modeling Of Fiber-Reinforced Polymer Bridge Deck Panels, Hesham R. Tuwair

Doctoral Dissertations

A fiber-reinforced, polyurethane foam core was developed, tested, and evaluated as a possible replacement for the costly honeycomb core that is currently used to manufacture fiber-reinforced polymer (FRP) bridge deck panels. Replacing these panels would reduce both initial production costs and construction times while also enhancing structural performance. Experimental, numerical, and analytical investigations were each conducted. Three different polyurethane foam (PU) configurations were used for the inner core during the study’s first phase. These configurations consisted of a high-density PU foam (Type 1), a gridwork of thin, interconnecting, glass fiber/resin webs that formed a bidirectional gridwork in-filled with a low-density …

Characterization Of Investment Shell Thermal Properties, Mingzhi Xu

Doctoral Dissertations

Thermal properties of investment casting shells have a great influence on the solidification of metal and thus control the properties of the cast product. Computational simulation requires accurate thermal properties to better represent the real process. Due to the porosity and meta-stable materials used in the investment shells, it is difficult to determine the real time thermal properties as a function of components and thermal processing history. Previous studies measured the thermal properties using a variety of methods, but very few results can be directly used in simulations due to lack of accuracy.

This research developed a new methodology that …

Resistance Switching Of Electrodeposited Cuprous Oxide, Sanaz Yazdanparast

Doctoral Dissertations

In this work, the resistance switching behavior of electrodeposited cuprous oxide (Cu₂O) thin films in Au/Cu₂O/top electrode (Pt, Au-Pd, Al) cells was studied. After an initial FORMING process, the fabricated cells show reversible switching between a low resistance state (16.6 Ω) and a high resistance state (0.4 x 10⁶ Ω). Changing the resistance states in cuprous oxide films depends on the magnitude of the applied voltage which corresponds to unipolar resistance switching behavior of this material. The endurance and retention tests indicate a potential application of the fabricated cells for nonvolatile resistance switching random access …

Seismological Investigation Of The Okavango Rift, Botswana, Youqiang Yu

Doctoral Dissertations

The mechanisms of rifting have been intensively investigated using geological and geophysical techniques beneath mature rift zones. However, current understanding on the earliest stages of rifting is seriously limited. Here we employ recently archived data from 17 broadband seismic stations traversing northern Botswana to conduct the first shear wave splitting and mantle transition zone (MTZ) studies within the Okavango Rift Zone (ORZ). The ORZ is an incipient continental rift situated at the terminal of the southwestern branch of the East African Rift System. The resulting normal MTZ thickness and consistently rift-parallel fast polarizations imply an absence of significant thermal anomalies …

Event Sampled Optimal Adaptive Regulation Of Linear And A Class Of Nonlinear Systems, Avimanyu Sahoo

Doctoral Dissertations

In networked control systems (NCS), wherein a communication network is used to close the feedback loop, the transmission of feedback signals and execution of the controller is currently carried out at periodic sampling instants. Thus, this scheme requires a significant computational power and network bandwidth. In contrast, the event-based aperiodic sampling and control, which is introduced recently, appears to relieve the computational burden and high network resource utilization. Therefore, in this dissertation, a suite of novel event sampled adaptive regulation schemes in both discrete and continuous time domain for uncertain linear and nonlinear systems are designed.

Event sampled Q-learning and …

Local Alternative Sources For Cogeneration Combined Heat And Power System, Abdulhakim Amer Agll

Doctoral Dissertations

"Global demand for energy continues to grow while countries around the globe race to reduce their reliance on fossil fuels and greenhouse gas emissions by implementing policy measures and advancing technology. Sustainability has become an important issue in transportation and infrastructure development projects. While several agencies are trying to incorporate a range of sustainability measures in their goals and missions, only a few planning agencies have been able to implement these policies and they are far from perfect. The low rate of success in implementing sustainable policies is primarily due to incomplete understanding of the system and the interaction between …

Pulsed Inductive Plasma Studies By Spectroscopy And Internal Probe Methods, Warner C. Meeks

Doctoral Dissertations

The broad effort of the Missouri Plasmoid Experiment is to elucidate the energy conversion processes in a pulsed inductive discharge due to the presence of plasma. The test article is a 440 to 490 kHz theta-pinch (or solenoidal) geometry coil with a stored energy of around 80 joules. In this work experimental hydrogen, helium, argon and xenon data at back-fill pressures of 10 to 100 mTorr (1.3 to 133.3 Pa) are obtained and interpreted. Spectral and internal probe studies were performed on MPX Mk.I and Mk.II devices, respectively. IR spectra were acquired in the Mk.I device for argon and xenon. …

Imaging Beneath Standing Bodies Of Water In Karst Terrain, Abdulrahman Masfer Alotaibi

Doctoral Dissertations

"Side scan sonar and down scan sonar, sub bottom profiling, electrical resistivity tomography profiling (underwater cables), and continuous resistivity profiling (towed cable) surveys were conducted to characterize the lake sediments (rock and soil) beneath the man-made Little Prairie Lake, in central Missouri. Sub bottom profiling and electrical resistivity (with marine cables and towed cable) were used to determine variability in the lithology and thickness of sediments (soil and rock) beneath the lake, while side scan sonar was used to map the variations in the lithology/nature of exposed lakebed sediments and to locate the potential hazard of trees. Down scan sonar …

Unmanned Aircraft Systems Image Collection And Computer Vision Image Processing For Surveying And Mapping That Meets Professional Needs, James Preston Peterson Ii

Doctoral Dissertations

"Unmanned Aerial Systems (UAS) are rapidly blurring the lines between traditional and close range photogrammetry, and between surveying and photogrammetry. UAS are providing an economic platform for performing aerial surveying on small projects. The focus of this research was to describe traditional photogrammetric imagery and Light Detection and Ranging (LiDAR) geospatial products, describe close range photogrammetry (CRP), introduce UAS and computer vision (CV), and investigate whether industry mapping standards for accuracy can be met using UAS collection and CV processing. A 120-acre site was selected and 97 aerial targets were surveyed for evaluation purposes. Four UAS flights of varying heights …

Investigation Of Lost Circulation Materials Impact On Fracture Gradient, Mortadha Turki Alsaba

Doctoral Dissertations

"Lost circulation is a challenging problem to be prevented or mitigated during drilling. Lost circulation treatments are widely applied to mitigate losses using a corrective approach or to prevent losses using preventive approaches, also known as "wellbore strengthening". The disagreement among the different wellbore strengthening theories and the lack of understanding the strengthening mechanism resulted in the absence of a standardized method to evaluate the effectiveness of lost circulation materials (LCM) for wellbore strengthening application.

An extensive experimental investigation was performed by constructing a high pressure LCM test apparatus to investigate the effects of different parameters on the sealing efficiency …

Numerical And Field Data Analysis Of Drill Stem Vibration, Mohammed Fayez Al Dushaishi

Doctoral Dissertations

"Drill stem vibration is a major cause of premature failure of drill stem components and drilling inefficiency. In severe cases, drill stem vibration may lead to wellbore instability that could lead to increased operational cost. Drill stem vibrations are affected by design decisions and the drilling environment. Examples are; bottom hole assembly configurations, selection of operational parameters, and frequent changes in lithology. Vibration modeling, analysis of vibration data, and specialized vibration reduction tools are methods in use to prevent and mitigate severe vibrations.

A drill stem vibration model was created using nonlinear strain formulation which couples the axial, lateral and …

Process Design, Dynamics, And Techno-Economic Analysis Of A Sustainable Coal, Wind, And Small Modular Nuclear Reactor Hybrid Energy System, Kyle Lee Buchheit

Doctoral Dissertations

"The availability of cheap electricity is one of the biggest factors for improving quality of life. With the debate on the effects of carbon dioxide emissions continuing, several countries have either implemented or are considering the reduction of emissions through various economic means. The inclusion of a monetary penalty on carbon emissions would increase the prices of electricity produced by carbon-based sources. The push for large-scale renewable sources of energy has met problems with regards to energy storage and availability. The proposed coal, wind, and nuclear hybrid energy system would combine a renewable energy source, wind, with traditional and stable …

Energy Management In Electric Vehicles: Development And Validation Of An Optimal Driving Strategy, Warren Santiago Vaz

Doctoral Dissertations

Electric vehicles (EVs) are a promising alternative energy mode of transportation for the future. However, due to the limited range and relatively long charging time, it is important to use the stored battery energy in the most optimal manner possible. Existing research has focused on improvements to the hardware or improvements to the energy management strategy (EMS). However, EV drivers may adopt a driving strategy that causes the EMS to operate the EV hardware in inefficient regimes just to fulfil the driver demand. The present study develops an optimal driving strategy to help an EV driver choose a driving strategy …

Analysis Of Production And Pressure Data To Characterize The Performance Of Oil And Gas Reservoirs, Abuagila Ramadan Elgmati

Doctoral Dissertations

"Production data analysis is an important tool for estimating important reservoir parameters. In particular, determining the average reservoir pressure (p_av) and tracking its change with time is critical to analyzing and optimizing reservoir performance. The traditional method for determining p_av involves pressure buildup tests. A direct method for estimating (p_av) from flowing pressures and rate data is available. However, the method is for an idealized case that assumes constant production rate during pseudo steady-state (PSS) flow, which is not generally true for real wells. This research extends that approach so that it can …

Privacy-Preserving Query Processing Over Encrypted Data In Cloud, Yousef M. Elmehdwi

Doctoral Dissertations

"The query processing of relational data has been studied extensively throughout the past decade. A number of theoretical and practical solutions to query processing have been proposed under various scenarios. With the recent popularity of cloud computing, data owners now have the opportunity to outsource not only their data but also data processing functionalities to the cloud. Because of data security and personal privacy concerns, sensitive data (e.g., medical records) should be encrypted before being outsourced to a cloud, and the cloud should perform query processing tasks on the encrypted data only. These tasks are termed as Privacy-Preserving Query Processing …

Non-Invasive Imaging And Assessment Of Pavements, Adel Mohamed Elkrry

Doctoral Dissertations

"Eight electrical resistivity tomography (ERT) and multi-channel analysis of surface wave (MASW) case studies are presented. The objective is to assess the condition of pavement, base, native soil, and rock all the way down to the top of the bedrock. Each segment of road way is approximately 1000 ft. long. The cases include US 63 north of Rolla, US 54 in Camden County, Rte. 179 in Jefferson City, HWY AT in Franklin County, I-55 in Pemiscot County, I-55 in Perry County, HWY U in Dent County, I-35 in Daviess County. In addition, there are only three types of pavement in …