Digital Commons Network^™

Distortional Buckling Of Cold-Formed Steel Members, Maximiliano Malite, Roberto Martins Goncalves, Jorge Munaiar Neto, Gustavo M. B. Chodraui

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

Cold-formed steel members are widely employed in steel construction because their structural components are lighter and more economical than traditional hot-rolled ones. Nowadays, the easy availability and accessible cost of high-strength low-alloy steels, weathering steels and zinc-coated steels have led to members with high width/thickness ratios, rendering them even more susceptible to local buckling, which is characterized by a plate buckling and which can also lead to another buckling mode called distortional buckling, affecting mainly members with edge stiffeners (lipped channels and Z-sections, hat, rack, etc.). Hence, current versions of technical codes for cold-formed steel design have warned about the …

2006 Cfw Initial Planning Meeting, Illinois Wesleyan University

Minutes

No abstract provided.

October 26, 2006 Minutes, Illinois Wesleyan University

Minutes

No abstract provided.

Shear Lag Effect On Bolted L-Shaped Metal Studs In A Wall Assembly, Chi-Ling Pan

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

The Missouri Miner, October 26, 2006

The Missouri Miner Newspaper

No abstract provided.

Influence Of Profile Distortion On The Shear Flexibility Of Profiled Steel Sheeting Diaphragms, M. Duerr, H. Saal

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Performance Of Ridge And Eaves Joints In Cold-Formed Steel Portal Frames, Dan Dubbina, Aurel Stratan, Adrian Ciutina, Zsolt Nagy

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Structural Behaviour Of High Strength Cold-Formed Steel Z Purlins With Overlaps, K. F. Chung, H. C. Ho

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Buckling Behavior Of Cold-Formed Scaffolding Tubes, A. Hubner, H. Saal

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Cold-Formed Steel Pitched-Roof Portal Frames Of Back-To-Back Plain Channel Sections And Bolted Joints, Aurel Stratan, Zsolt Nagy

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Designing Cold-Formed Steel Using The Direct Strength Method, Benjamin W. Schafer

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Testing And Design Of Light Gauge Steel Frame 9mm Osb Panel Shear Walls, C. Blais

CCFSS Proceedings of International Specialty Conference on Cold-Formed Steel Structures (1971 - 2018)

No abstract provided.

Mustang Daily, October 25, 2006

Cal Poly Student Newspaper

Student newspaper of California Polytechnic State University, San Luis Obispo, CA.

The Cord Weekly (October 25, 2006)

The Cord

No abstract provided.

Usa V. Tirado

2006 Decisions

USDC for the Western District of Pennsylvania

Characterization Of Error-Tolerant Applications When Protecting Control Data, Darshan D. Thaker, Diana Franklin, John Y. Oliver, Susmit Biswas, Derek Lockhart, Tzvetan Metodi, Frederic T. Chong

Electrical Engineering

Soft errors have become a significant concern and recent studies have measured the "architectural vulnerability factor" of systems to such errors, or conversely, the potential that a soft error is masked by latches or other system behavior. We take soft-error tolerance one step further and examine when an application can tolerate errors that are not masked. For example, a video decoder or approximation algorithm can tolerate errors if the user is willing to accept degraded output. The key observation is that while the decoder can tolerate error in its data, it can not tolerate error in its control. We first …

What Is Good Practice In Health And Physical Education?, Tj Lynch

Plymouth Institute of Education

St. Elizabeth's Catholic Primary School was recently awarded the 2006 ACHPER Queensland Teresa Carlson award for their outstanding Health and Physical Education (HPE) programme. HPE specialist teacher, Tim Lynch provides an overview of this programme for Years 1-7.

Montana Kaimin, October 25, 2006, Students Of The University Of Montana, Missoula

Montana Kaimin, 1898-present

Student newspaper of the University of Montana, Missoula. Page 3 is missing.

The Winonan, Winona State University

The Winonan - 2000s

No abstract provided.

Measured Impacts Of Proper Air Conditioning Sizing In Four Florida Case Study Homes, Florida Solar Energy Center, Jeffrey Sonne

FSEC Energy Research Center®

Previous studies have shown that residential air-conditioning system oversizing is a common practice that has both energy and comfort penalties. A Florida Power and Light / Florida Solar Energy Center (FSEC) study involving over 350 homes found that 50% of the studies AC systems were over sized by 120% or more (James et al. 1997). The same study found oversizing AC systems by 1.0 to 1.2 times Manual J resulted in 3.7% higher cooling energy use and oversizing systems 1.2 to 1.5 times Manual J resulted in 9.3% higher cooling energy use.

The goal of Task 3.2, Benefits of Proper …

The Daily Gamecock, Wednesday, October 25, 2006, University Of South Carolina, Office Of Student Media

October

No abstract provided.

Townsend’S Big-Eared Bat (Corynorhinus Townsendii): A Technical Conservation Assessment, Jeffery C. Gruver, Douglas A. Keinath

KIP Articles

No abstract provided.

Mining The Arabidopsis Thaliana Genome For Highly-Divergent Seven Transmembrane Receptors, Etsuko N. Moriyama, Pooja K. Strope, Stephen O. Opiyo, Zhongying Chen, Alan M. Jones

School of Biological Sciences: Faculty Publications

To identify divergent seven-transmembrane receptor (7TMR) candidates from the Arabidopsis thaliana genome, multiple protein classification methods were combined, including both alignmentbased and alignment-free classifiers. This resolved problems in optimally training individual classifiers using limited and divergent samples, and increased stringency for candidate proteins. We identified 394 proteins as 7TMR candidates and highlighted 54 with corresponding expression patterns for further investigation.

Campus Chronicle, Jeremy Harmsen, Malina Doke, Monica Bollenbaugh, Malin Cheney, Kelly Cheney, Jeni Gieseke, Jesi Landwier, Megan Lyon, Alex Middleton, Aleah Christianson, Megan Harrison, Rick Farlow, Julie Roosa

Campus Chronicle

No abstract provided.

The Daily Egyptian, October 25, 2006, Daily Egyptian Staff

October 2006

No abstract provided.

Daily Eastern News: October 25, 2006, Eastern Illinois University

October

No abstract provided.

The Lumberjack, October 25, 2006

Cal Poly Humboldt's Student Newspaper

The student newspaper of Humboldt State University.

Evolution Of Surface Morphology Of Thermo-Mechanically Cycled Nicocraly Bond Coats, J. Shi, Anette M. Karlsson, B. Baufeld, M. Bartsch

Mechanical Engineering Faculty Publications

We investigate morphological surface instabilities on bond coat surfaces of thermal barrier coatings, induced due to thermo-mechanical loading. Experimental results of hollow circular cylindrical specimens, consisting of a directionally solidified superalloy (IN 100 DS) coated with a NiCoCrAlY bond coat, show that the morphological instabilities are strongly dependent on the load conditions. In particular, the morphological instabilities develop during thermal cycling with a thermal gradient over the cylinder wall, whereas the surface remains smooth for thermal cyclic conditions without a gradient. Furthermore, if a cyclic, axial tensile force is applied (synchronized with the thermal cycling), the morphological instabilities become aligned …

Fermiology And Superconductivity At High Magnetic Fields In A Completely Organic Cation Radical Salt, J. S. Brooks, V. Williams, E. Choi, D. Graf, M. Tokumoto, S. Uji, F. Zuo, J. Wosnitza, J. A. Schlueter, H. David, Rolf Walter Winter, Gary L. Gard, K. Storr

Chemistry Faculty Publications and Presentations

We report specialized interplane magnetoresistance (MR) measurements on the organic superconducting compound β″–(BEDT-TTF)₂SF₅CH₂CF₂SO₃ (where BEDT-TTF is bis(ethylenedithio)tetrathiafulvalene) in both the superconducting (Tc ∼ 5K) and normal states versus magnetic field direction. In the normal state, detailed angular-dependent magnetoresistance oscillation (AMRO) studies reveal peculiar features of the Fermi surface topology of this compound, and very high magnetic field studies further support the unusual nature of the electronic structure. In the superconducting state we investigate, through detailedAMRO measurements, the anomalous MR peak that appears within the superconducting field-temperature phase diagram. Our results reveal a direct connection between the superconducting state determined from …

Fall Tax Planning, Tina N. Barrett

Cornhusker Economics

There are many benefits to doing fall tax planning for your operation, but the best is what it may cost you if you don’t do it. Really good tax planning requires someone who is knowledgeable in the changes made in the tax law each year, creative enough to think outside of what is normal and realistic enough to know what is possible.