Digital Commons Network^™

High Tech Transition And The Organization, Chetan H. Shah

Theses

The future outlook of any corporation depends upon the resourcefulness of those who manage the planning and operating functions of the business. Time and accuracy are two critical criteria in effective managerial reports for decision making. The electronic computer is a welcome addition into the industry. While its applications to payroll, accounting, sales, and inventory have been extensive, computing has nevertheless been criticized. This study concentrates on determining the impact computing has had on the managers and especially on the people working in the organization from clerks to the top level management.

While an investigation of the existing literature was …

Investigation Of The Size Of Gallium Clusters Formed Using A Modified Ion Cluster Beam Source With A Crucible Temperature Of 1250 Degrees C, Sujit M. Shah

Theses

Energy analysis of the ionized gallium clusters was done by retarding field method. The objective of this research was to investigate the possibility of gallium cluster formation during nozzle jet expansion and to estimate the probability of ionization of clusters. The measurements at a crucible temperature of 1250°C corresponding to gallium vapor pressure of 0.23 torr (inside the crucible) showed that no large cluster sizes could be obtained. The relationship between mass deposition rate (atoms/cm2-sec) and cluster size (atoms/cluster) showed that there were two distinct peaks. One with a cluster size of 1 atom/cluster and the other with about 13 …

Graphical Interpretation Of U.S. Tidal Data, Vaheh Shahbazian

Theses

Numerous Shore line operations relating to industry and conservation would benefit from convenient access to continuous tidal predictions. Easy Graphical access to continuous long term predictions of tidal heights at a location of interest will simplify operations that are sensetive to tidal predictions. A specific example, is the implementation of a protective measurements against flooding and destruction of shoreline facilities particularly at times of high tides.

This thesis consists of three things. First, rendering NOAA's data in a form accessable to a PC user. Second, it provides a Basic program for prediction of tides. Third , PC user programming Resourses …

Reliability Studies On Microcircuit, Salim Shehadeh

Theses

The primary objective of this thesis is to determine and analyze the failure mechanisms of Low Power Schottky microcircuit device (2-Input NAND Gate). Pinpoint the causes, and suggest the precautionary measures that prevent the occurrence of these failures. To achieve this goal, the study went in two directions, theoretical and experimental. The theoretical part is a comprehensive review of the work done on Low Power Schottky 2-Input NAND Gates since 1960 up to date.

The experimental part of the study is a life test ( 1000 hours ) of 2-Input NAND Gates under humidity and high temperature.

For each unit, …

Life Testing Of Solid Dielectric Materials, Muhammad Irfan Soomro

Theses

The main objective of this thesis was to find correlation between the electrical noise generated within the body of the solid dielectric material with the failure (puncture), under simultaneously applied thermal and electrical stresses.

The term 'Corona' is commonly used to describe any partial discharges occurring in voids (defects) in the material. Precisely corona is a flow of electrons and ions which occur in a void in air or other gasses. This event emits acoustic, optical and radio frequency energy, and can be detected by measuring any of these radiations. In the present thesis, Radio Interference Voltage (RIV) technique was …

Method Of Moments Analysis Of Very Thin Wires Using The Mini-Numerical Electromagnetics Code, Douglas F. Stolarz

Theses

The analysis of thin wire antenna systems in the presence of a conducting ground plane is an important engineering problem. This thesis presents an analysis of wire radiators using the method of moments as implemented in the Mini-Numerical Electromagnetics Code (MININEC). Due to singularities in the formulation, MININEC yields inaccurate results for very thin wires. This code was modified by introducing filament currents for very thin wire structures thereby eliminating inaccuracy due to the treatment of singularities.

The modified code was tested on a monopole over a perfect ground, symmetrical and asymmetrical dipoles in free space, and inverted L and …

Novel High Resolution Columns For Gas Chromatography, Douglas Kenneth Stout

Theses

A study was conducted to determine if BN would be a reliable solid phase or support for open tubular capillary columns and to develop a technique for the deposition of BN on the column's inner walls. The theoretical plate results for constructed precoated BN columns demonstrated that BN can be employed as solid stationary phase, but evinces low separation characteristics due to the nature of the drawing process. The development of a simple BN precoating process was tested on various diameter capillary columns and found to provide an excellent support for highly polar liquid stationary phases. Capillary columns with a …

Wear And Development Of Wear Testing Methodology, Tirumalai S. Suresh

Theses

The existing wear and friction theories, and wear testing methods have been analysed to meet the objective of this study. One of the key factors in the analysis of a wear problem is the computation of wear and friction coefficient for a material, under real operating conditions. A new wear testing methodology has been developed and a wear tester has been designed and assembled. The tests have been performed at constant sliding speed and different applied loads for a Cast-Iron - hardened Steel pair.

Simulation Of Hvac Systems And Library Building Of New Jersey Institute Of Technology Newark, N.J., Muhammad A. Syed

Theses

The HVCASIM⁺ Building Systems and Equipment simulation program package developed at National Bureau of Standards has been used to simulate the building load and HVAC systems of N.J.I.T. library building, This report describes the procedure and strategy adopted to simulate the library building and the HVAC systems.

The library building has been simulated with two different sets of parameters, first with original design data and then with modifications for energy conservation, which ware suggested by the energy management consultants M/s Engineers Incorporated, as a part of the New Jersey Department of Energy School Grant program.

The results of tho …

A Cad Tool For Edif Model Generation, Sri Nagesh Valluri

Theses

This thesis describes a new CAD tool designed to create models proposed by Electronic Design Interchange Format steering committee. In its present form the system can generate models for standard SSI and MSI devices. The menu driven window based fillup the form features of the tool allows a novice user to provide structural and timing informations of the device from any manufacture's data book. The software performs online checking of the user data and guides them to generate the correct model.

Benzene Losses From Aqueous Solutions During Geotechnical Laboratory Testing, Konstadinos Vogiatzis

Theses

This study addressed the problem of using volatile organics in geotechnical laboratory tests. Previous experiments with volatile organics such as benzene and trichloroethylene with soils had shown significant concentration losses during the tests. The purpose of the study was to identify the sources of loss and to quantify the magnitude of loss.

Vapor - liquid equilibrium was used to predict theoretical evaporation losses of benzene from aqueous solutions. Calculations were made for both an infinite volume of air and for a finite volume. Experiments were then performed to verify the theoretical predictions.

Other losses considered were those during solution preparation, …

Implementation Of Xilinx Development System And Xilinx Lca Application, Youcheng Wu

Theses

The Xilinx Application-Specific Integrated Circuit (ASIC) is a large array of programmable logic cells. Creating logic design using the Xilinx ASIC offers ease of implementation, high function density, design flexibility and lower consumption of supply power. The techniques of implementation of system and design with Xilinx CAD/CAM System include system analysis, modification, update, optimal design algorithms and real circuit emulation.

This thesis combines the setup and operation of the complete Xilinx system, and implement Xilinx LCA into 8052AH-BASIC based Single Board Computer and user's menu of real LCA chip evaluation Board. It presents our own design, construction, test and demonstration …

Current Trends In Facilities Planning, Chaochou Yang

Theses

In the past year the costs of computing and computer graphics have come down dramatically. At the same time, the computer graphic system has become easier to use, As a result, computer support has become more costeffective than before.

In this thesis, the writer describes types of systems first, then looks at computer usage. He first defines the technologies of DSS, CAD and MIS, then takes a detailed, step-by-step look at facilities planning and the various ways in which computers are used for support. Well-conceived planning is an important prerequisite to effective computer use. The remainder of the thesis expands …

Xilinx Asic Design For A Single Board Computer, Hong Zhan Ye

Theses

Xilinx Application-Specific IC is a new kind of programmable cell array with high design flexibility and functional density. It not only has excellent circuit-board utilization and low power consumption, but it also offers easy implementation with lower engineering cost and very short production-rampup period.

This thesis provides a complete and specific procedure for implementing Xilinx LCA into a 8052AH-BASIC based single board computer with XACT development system. It verifies all the results from debugging SBC2064 design using both XACT query system and P-SILOS simulator.

The technology of implementing a whole system design with software and hardware fully proves the possibility …

On Weakly Coupled Hyperbolic And Parabolic Partial Differential Equations Arising In Chemical Engineering Problems, Zhifeng Zhang

Theses

Many of the mathematical models arising in dynamical chemical processes are systems of weakly coupled hyperbolic and parabolic partial differential equations with constant coefficients. It is shown in this paper that this kind of systems of partial differential equations can be treated using generalizations of Green's functions. The Green's function is completely defined, including all boundary conditions, for systems with nonselfadjoint operators as well as those which are selfadjoint. The Green's functions can be expressed in terms of eigenvalues and eigenfunctions of the operator and the adjoint operator when they can be obtained. We develop a method based on higher …

The Study Of The Response Of Nucleus Ambiguus Neurons To Blood Pressure Changes, Adrienne Zoe

Theses

The purpose of the project is to aid the study of the response of nucleus ambiguus neurons to changes in blood pressure. The sampling runs indicate that there is a correlation between blood pressure and neuron activity for some of the neurons monitored. Some neurons react to blood pressure increases by Increased neural firing rate while others react by decreased neural firing rate. Some neurons do not respond to blood pressure manipulation comprising the non-vagal neurons. A system was developed for the DIN PC to collect electrocardiogram, blood pressure, and neuron activity from a dog, and to perform non-real time …

A Mathematical Model Of Photopolymerization In A Batch Reactor, Jyh-Yao Li

Theses

A mathematical model of a photo initiated additionpolymerization in a batch reactor was developed.

The model considered initiation, propagation and, termination to simulate the addition polymerization process, The model has the advantage that the concentration of any particular n-mer may be calculated without calculating all of its precursors. Other methods do not have this property. An analytical solution to the model for the photopolymerization of styrene was solved. The calculations were run on a VAX 8800 computer and the results were then compared with the experimental results. The calculated results fitted the experimental results to some extent. Effects from the …

Non-Linear Finite Element Of Analysis Of Reinforced Concrete Members, Chellathurai Jeyamohan

Theses

A finite element analysis of reinforced concrete members is used to study the initiation and propagation of cracks and the behavior at the interface of concrete and steel. The increase of concrete strength due to the biaxial compression and the shear capacity of the cracked elements are also considered in the analysis.

The results of the present analysis are compared with some available experimental data in beam tests. It has been found that the present analysis is capable of calculating the stress ( or moment ) and strain ( or deformation ) from zero load upto the ultimate load.

Time Series Analysis Of Respiration Component In Heart Rate Variability, Anuradha Ramaswamy Iyengar

Theses

Time series signal processing techniques (Fourier based) were applied to analyze the relationship between heart rate and respiration. This analysis takes advantage of the different timing charecteristics of the autonomic nervous system inputs to analyze their influence on the heart rate.

Data from three experiments were analyzed. The first set of data was from helicopter pilots of the US Army. They injected atropine into themselves on certain days. The effect of atropine on the heart rate spectrum and the relationship between heart rate and respiration was studied. It was found that atropine abolishes the respiration peak in the heart rate …

Analysis Of Nitrated Polycyclic Hydrocarbons, Pah-Quinones And Related Compounds In Ambient Air, Yalan Wang

Theses

Studies were conducted to characterized airborne particulate extractable organic matter (EOM) with respect to chemical composition and biological activity. It has been well established that the nitrated polycyclic hydrocarbons (nitroPAH) are environmental contaminants. To identify nitro-PAH in ambient air sample, a technique was developed involving introduction of a reducer column into an reversephase high performance liquid chromatography (HPLC) system. Strong fluorescence signals were achieved from nitro-PAH and detected together with u.v. signals for the qualitative and quantitative analysis of nitro-PAH. 2-Nitrotriptycene was synthesized according to published procedures and used as an internal standard. By use of the above technique, 9nitroanthracene, …

Feasibility Of Using Canine Olfaction As A Means Of Detecting Hazardous Substances, Stuart David Messur

Theses

Two specific applications for using canine olfaction as a means of detecting hazardous substances have been recognized: detection of residual contamination on hazardous waste cleanup equipment (DECON), and detection of leaking underground gasoline tanks (LUST).

With the DECON project, the dog's ability to detect low emissions of some common hazardous compounds was tested. As a safe and effective training tool for presenting hazardous compounds to the dog, permeation tubes filled with m-xylene or 1,1,1-trichloroethane were constructed and calibrated. Hidden tubes emitting as low as 0.5 µg/min were consistently detected by the dogs. During olfactory field tests, "hot spots" of m-xylene …

An Investigation Of Electrical And Optical Properties Of Sputtered Amorphous Silicon Nitride And Germanium Thin Films, Rajendra S. Khandelwal

Theses

Low temperature preparation of thin amorphous Silicon Nitride and Germanium Films by direct RF sputter deposition was investigated. Influence of various sputtering parameters on film properties was studied. Infrared transmission spectrophotometry was used to evaluate optical properties of the films whereas electrical characteristics of the films were determined from current-voltage measurements of MIS structures. For Silicon Nitride films it was observed that the stoichiometry, as indicated by the IR transmission, dielectric constant and current density versus square root of electric field measurements, was a strong function of the sputtering gas composition and particularly the Ar/N ratio in the sputtering gas. …

Properties Of Sputtered A-Ge And A-Ge : H Thin Films, Hanjin Cho

Theses

The effect of the amorphous and glassy structure of amorphous germanium films on their electrical characteristics was investigated experimentally. The films were deposited onto silicon substrates using a modified MRC 8800 triode sputtering system. The Poole-Frenkel and Schottky mechanisms are discussed in detail and the shortcomings of the accepted picture of the former in amorphous materials are dealt with. It was concluded on the basis available evidence that the current flow in amorphous germanium favors the Poole-Frenkel mechanism at high fields.

Amorphous hydrogenated germanium films which were deposited by bias sputtering were characterized by measuring the infrared absorption. The films …

Process Hazard Review For Drug Development, Rudolph R. Schwarz

Theses

The development of drugs has become increasingly complex, requiring the use of a wide variety of pharmaceutical actives and isolated intermediates, a majority of which are not always completely characterized with respect to their hazard potential. This can present a source of potential exposure to those who handle these substances during initial drug development, manufacturing of the drug active and ultimately the finished pharamaceutical product. It is, therefore, essential that safety and health information be documented and communicated during the entire drug development process.

The need for application of process hazard review techniques to the development of new drug materials …

Stress Analysis Of A Stepped Shaft With A Keyway, Irfan Hussain Sabir

Theses

A stress concentration case which is encountered in practice more than any other is the shoulder fillet. Shafts, axles, spindles, rotors etc., usually involve, in each case, a number of diameters connected by shoulders with fillet radii and very often it is necessary for a keyway to be near a shoulder. The objective in this study is to analyse the stresses in a shouldered shaft with a keyway subjected to an axial tensile load and to study the dependence of the keyway-end stresses on the distance between the shoulder fillet and the keyway end. This is done by performing a …

Construction Loan Proposal : A Model For Contractors, Saeed Ahmed

Theses

This thesis is an attempt to outline a construction loan proposal. The purpose is to provide an average contractor with an insight which could help him toward a preparation of a better proposal and better understanding of the subject matter itself.

Feasibility Of State-Of-The-Art Project Planning Techniques In Pakistan, Ahmed Mansoor Ansari

Theses

The objective of this work is two-fold:

1. Technological transfer of the best suitable state of the art techniques for implementation in the construction industry of Pakistan.

2. A vehicle intended for American readers to gain insight of the present methods of working in Pakistan.

In harmony to the first of the forestated ambitions this work covers subjects widely ranging from introducing the concept of proven scheduling techniques as CPM, PERT to the application of these techniques via advanced computer technology.

Frequently, American professionals and consulting firms are invited to participate to administer or design specialist construction projects in Pakistan. …

Study Of Reliability And Failure Mechanism Of Solid Tantalum Capacitor, Rajan N. Bhatt

Theses

Today, reliability is acknowledged as an important item in design and operation of the electronic systems.

This thesis provides some theory, and experiments are instituted to evaluate the reliability of SOLID TANTALUM CAPACITORS made by reputed manufacturers. The experiment was conducted on four batches of tantalum capacitors at different temperatures at different humidity levels. One chapter is on different manufacturing techniques presently applied.

Literature study concentrates on the reliability in solid tantalum capacitors developed between 1961 and 1986.

Several failure mechanism with figure are illustrated to point out how higher reliability of solid tantalum capacitor may be developed.

The bibliography …

Management And Organizational Effectiveness Examined : Past Practices And Theories Versus The Future, Ronald J. Boyer

Theses

The primary objective for this thesis is to collect and analyze data on how a new model for business organizations might best be formulated. There seems to be a consensus among authorities in the field that because modern business practices are so complex, indeed they have been revolutionized in many areas in the past decade. New organizational techniques must be devised if organizations are to remain as effective and as efficient as in the previous area. Some have claimed that the present structural model has reached the point of no return-that is, no longer functional because of such factors as …

Finite Element Stress Analysis Of The Femoral Hip Stem Prosthesis - Bone Interface, Mark C. Buechel

Theses

A three-dimensional finite element model is used to examine the stresses of the femoral hip stem prosthesis and surrounding bone, specifically at the interface between the stem and the bone. Using General Electric's GEOMOD modelling program, 3-dimensional models of the hip stem prosthesis, and both the cortical and cancellous bone, are generated. Due to the complexity of the individual models, General Electric's SUPERTAB modelling program is required to merge the three separate models into one complete model. The model is then broken down into finite elements for analysis. The model assumes isotropic properties to cortical bone and cancellous bone. Several …