Digital Commons Network^™

The Contemporary Vessel, Alice Carroll

Theses

None provided.

Line Reproduction In Mapping Utilizing The Four Color Process Model, John R. Handy

Theses

The application of the four-color process to printing fine line work found on topographical maps was investigated. A description of the mapping process is included and the reason why the four-color process would be advantageous to cartographic printing was discussed. The chapter on fourcolor process theory was included for the benefit of the cartographic community - The experimental design for data transfer, color tolerance, target design to match spot and process color, as well as color space employed, were reviewed. The reasons for the use of a direct digital proofing system were explained. The results of data transfer were evaluated …

Quantitative Assessment Of Myocardial Oxygen Supply And Demand Using A Dynamic Model Of The Cardiovascular System, Badrinath R. Puranic

Theses

A quantitative understanding of the changes in coronary, pulmonary and systemic hemodynamic variables and their effect on myocardial supply and demand is important to the better management of anesthetic care of patients with impaired cardiac function. Animal studies have identified those hemodynamic factors that play an important role in determining the balance between oxygen supply and demand for the myocardium. These include myocardial contractility, left ventricular end-diastolic volume, systemic arterial pressure, systemic vascular resistance, and heart rate. The interactions of these factors are complex and their combined effects on myocardial oxygen supply and demand are difficult to predict a priori. …

The Durability Of Hot Mix Asphalt With Petroleum Contaminated Soils, Bonnie H. Dubose

Theses

Petroleum contaminated soils are considered solid waste They must be taken to solid waste facilities such as landfills or some other method must be found to deal with them. Landfills are becoming limited and is looked upon by the government as the least attractive option. One method that looks promising is to use petroleum contaminated soils in Hot Mix Asphalt Concrete.

In the research program the following are examined: 1) Investigation of material properties of the petroleum contaminated soil and aggregates 2) The proper procedure to produce a design blend of asphalt concrete. 3) Establishing the test procedure protocol to …

Catalytic Ozone/Ultraviolet Light Oxidation Of Organics In Water : Integrated Charcoal/Ozonation/Uv Radiation, Dawei Wang

Theses

A novel heterogeneous catalytic-oxidation technology where activated carbon is used as a catalyst-adsorbent, ozone serves as the oxidant and UV light as activation agent, is developed in a lab scale study. We demonstrate this process for destruction of recalcitrant organics in water i.e: combined oxidation by ozone, UV light plus activated carbon. The investigation includes evalution of various operating conditions: ozone levels, activated carbon levels; time for complete destruction of the individual target pollutants, plus evalution of activity of the continuously recativated carbon surface in-situ. All experiments were performed at room temperature in a semi-batch reactor. Seven representative chemicals was …

Bacterial Biosorption Of Heavy Metals From Liquid Wastestreams, Emilia Rus

Theses

In this study, immobilized activated sludge from a municipal wastewater aerobic treatment plant has been evaluated as a potential biosorbent for the removal of heavy metals from liquid waste streams. The method of immobilization consists of entrapment of the microorganisms in calcium alginate beads.

The affinity of immobilized activated sludge to cadmium, lead, chromium and copper has been evaluated under well defined laboratory conditions.

Initially, the time course of metallic ions uptake and the effect of pH and temperature on biosorption were studied for each metal. Then the biosorption pattern and the effect of biosorbent concentration on binding capacity were …

Errors In Constant-Velocity Shaft Couplings, Philip M. Remington

Theses

A Multiloop spatial system of rotations is used to represent a shaft coupling, allowing a transmission plane which may deviate from the plane of symmetry to be specified. The plane of transmission, for intersecting input and output shaft axes, is the locus of intersections of screw axes that compose the system. By prescribing the transmission plane outside of the plane of symmetry (commonly called the "homokinetic plane" or "bisecting plane") to pecified orientations, a phase shift between the input and output shaft rotational displacements will he quantified. The rotational phase shift between the input and output shafts can be evaluated …

Quantitative Measurement Of Pyrolysis And Combustion Species Concentration By Molecular-Beam-Sampling-Mass-Spectrometry, Xian Zhong

Theses

A molecular-beam-sampling apparatus utilizing both a time-of-flight mass spectrometer with vacuum ultraviolet (VUV) photoionization and a quadrupole mass spectrometer with electron impact ionization is described. These systems are used to analyze reactants and products, as well as reactive intermediates, from flow tube experiments at reduced pressures and elevated temperatures. It is shown that the quadrupole signal sensitivity can be predicted using literature cross sections which are based upon the atom hybridization within the various molecules. Measurements of the VUV photoionization sensitivity for stable species led to development of a group additivity approach to predict cross sections. This approach was extended …

Thermal Decomposition Of Dichloromethane In Absence And Presence Of Added Oxygen And/Or Methane, Hong-Ming Chiang

Theses

Thermal decomposition experiments on dichloromethane in absence and presence of added O₂ and/or ₄ and in argon bath gas were conducted in a tubular flow reactor. The thermal reactions were studied at 1 atmosphere pressure with residence times of 0.3 - 2.0 seconds in the temperature range from 680 to 840 °C.

The degradation of dichloromethane and the decomposition product distributions were studied in both oxidative and pyrolytic reaction environments. The slowest decay of dichloromethane occurred when CH₄ was present and 02 was absent. The concentration of all products, (except HCl, CO, and CO₂ in the oxidation), …

Synthesis Of Bisphenol A Bis-2-Hydroxypropylmethacrylate (Bisgma) And Diethylchlorophosphate And 2-Hydroxyethylmethacrylate (Decp-Hema) And Preparation Of Dental Adhesives, Da Xie

Theses

BisGMA and DECP-HEMA were separately synthesized from Bisphenol A and glycidyl methacrylate and from diethylchlorophosphate and 2-hydroxyethyl-methacrylate. The structure of the monomer, BisGMA, was further analyzed by means of chromatography, VPO, IR, FTIR and GC-MASS.

Based on the main monomers, BisGMA, DECP-HEMA and an organosilane compound, a dental adhesive has been formulated. Although the tervile strength of the adhesive has been found to be not as good as the adhesive formulated by a previous worker (student), its applicability to teeth is more suitable for clinic practice.

Porting Cosmos Expert System From Unix To Dos, Ching-Jeng Chiu

Theses

COSMOS is an object-oriented Knowledge Based System building Tools (KBSTs) to solve problem in engineering industry. COSMOS stands for C++ Object-oriented System Made for expert System development.

In order to provide more people those who don't have a Sun workstation to use this expert system, our task is porting COSMOS form UNIX to DOS.

Because the differents of workstation environment, the user interface and structure of original COSMOS no longer can be used, therefore we made some necessary change before we porting it to IBM Personal Computer.

In stead of X Window system®, we implemented ObjectWindows® runs on Microsoft WindowsTM. …

Uses And Applications Of Artificial Intelligence In Manufacturing, Manojkumar H. Desai

Theses

The purpose of the THESIS is to provide engineers and personnels with a overview of the concepts that underline Artificial Intelligence and Expert Systems. Artificial Intelligence is concerned with the developments of theories and techniques required to provide a computational engine with the abilities to perceive, think and act, in an intelligent manner in a complex environment.

Expert system is branch of Artificial Intelligence where the methods of reasoning emulate those of human experts. Artificial Intelligence derives it's power from its ability to represent complex forms of knowledge, some of it common sense, heuristic and symbolic, and the ability to …

The Acoustic Properties Of Human Femoral Bone, Mark Lacianca

Theses

Over the last decade, interest has grown in the use of the scanning acoustic microscope (SAM), with a single lens being used for both transmitting and receiving the acoustic signal. A major objective of this thesis was to determine if the transmission and ultrasonic techniques yield similar "quantitative" results, when measuring the elastic constants of human femoral bone. The transmission technique has been used since 1970 to yield values for the elastic properties of calcified tissue. Previously the SAM has been used as a qualitative tool, where an acoustic impedance map is produced. This map can show areas of bone …

Development Of The Interface Between Cad And Waterjet Nc Systems, Sivayasivan Sambandan

Theses

There has been a continuous need in the present to develop softwares that provide interface between cutting machines and computer control. There involves a number of complex stages from the birth of an algorithm, to develop such software, till the end where it successfully gets tested and implemented. Cutting Path Simulation (CPS) is a partially developed software designed to model 2-d and 3-d objects and down load them to water jet cutting machine. Additional menus were created in the software to perform specific functions. Bugs that existed in the previously done work were removed. Investigation was conducted on the feasibility …

Application Of Desktop Manufacturing System (Sla) For The Manufacturing Of A Centrifugal Pump Impeller Using Cad (I-Deas), Wasimuddin Azam Muhammad Syed

Theses

Desktop Manufacturing (DTM) systems which combine personal computer, laser and other technologies are being used to sculpt objects from computer generated models created on computer aided design (CAD) workstations. As a member of DTM systems, StereoLithography Apparatus (SLA) transforms 3-dimensional designs into a 3-D output. This can substantially reduce the time required to produce a prototype through the process of photopolymerization. The process involves the transfer of a liquid plastic monomer into a solid polymer by exposing it to ultraviolet light.

Although the process looks productive, inefficiencies can occur, if incorrect parameters are selected before its application for a particular …

Domain Analysis Within The Gensif Framework, Heiko Thimm

Theses

The GenSIF framework which is targeted towards very large, distributed, and complex software systems recently has been proposed to accomplish a form of systems engineering and systems development in which the issue of systems integration is considered from the beginning on.

One of the components of GenSIF is domain analysis. Domain analysis leads to the design of a domain model. The specific needs GenSIF has in that area were investigated with an emphasis on domain modeling. Main points addressed in that investigation were the issue regarding the relevant information for the domain modeling process and the required type of domain …

Planning Of Optimal Transit System Design, Yongning Liu

Theses

This study presents a methodological approach for finding an optimal design of bus transit service in an urban transportation corridor with elastic demand and under various objective functions. Service design decision variables to be optimized include the route length, route density, headway, number of stops and stop spacing pattern. The objective functions that optimize the transit system design include: minimizing operator cost, maximizing profit, minimizing sum of operator and user costs and maximizing the users' net benefits.

The analysis uses an elastic demand function wherein the number of trips are sensitive to the quality of service provided and price charged …

Sgml-Based Publishing, Erinne G. Cheney

Theses

None provided.

Sculpture In Space, Jui-Chang Liao

Theses

None provided.

New York State Urban Cultural Park System, Jeanne S. Fagan

Theses

This study focused upon the New York State Urban Cultural Park System (UCP) . An urban cultural park is a designated historical area in a community which has been revitalized to interpret the community's role in the cultural development of the region and state. Unlike typical green space "parks", the UCP will include the areas where residents work, live and play- The roles of Cultural Tourism and Tourism Development in the UCP were investigated. Interviews of individuals involved in the planning, development and implementation of the UCP were conducted. Site visitations were conducted to several of the UCP communities. The …

Blood Pressure Monitoring System, Fa-Liang Wang

Theses

In order to control disease and survive, humans have been struggling thousands of years with the expenditure of human energy and money. We retain the heritage of our ancestors' medical knowledge, and develop our accumulated medical technology for ourselves and our offspring. Human are still seeking convenient, continuous and accurate methods for obtaining data that can be read directly from our body in order to control disease. Some of these methods are: taking urine to identify many diseases , sampling serum to check for plasma glucose, and applying a sensor to measure blood pressure and pulse rate.

Computers In College Art And Design Programs, Marla Jo Keating

Theses

None provided.

Fashion In Sculpture, Yi-Meei Wang

Theses

None provided.

Evaluation Of Digital Image Compression Algorithms For Use On Lap Top Computers, Bernard V. Brower

Theses

A technique for the evaluation of image compression algorithms was developed. This technique was then applied in the evaluation of six image compression algorithms (ARIDPCM, ISO/JPEG DCT, zonal DCT, proprietary wavelet, proprietary sub-band coding and the proprietary DCT). Of the six algorithms evaluated, the Wavelet algorithm performed the best on average in image quality at all bit rates. The JPEG DCT was concluded to be the most useful algorithm because of its performance and the advantages that come with being an international standard.

Wall Works: Painting As Record And Revelation, Donna Kristoff

Theses

None provided.

Eco Battery Exchange System, Rit Kasetsuwan

Theses

None provided.

A Survey Of Musical Attitudes At Hazelwood Central High School, John L. Meurer

Theses

The purpose of this study was to determine by survey whether or not the parents and students of Hazelwood Central High School were satisfied with the curriculum and trends of the instrumental music program . The survey was compiled from current literature dealing with politics, competition, music curriculum vs. academics, and jazz education.

In this study data were collected by surveying graduating seniors and parents from the music classes of 1991. The sample consisted of 34 students and 35 parents. The data gathered for this study were analyzed by the t-test for significant differences between parents and students. Differences were …

Rheumatoid Arthritis And Myasthenia Gravis As Examples Of Autoimmune Diseases, Michael Collins

Theses

None provided.

Cicc Information System, Chang-Mei Lin

Theses

The CICC Information system is an interactive media project simulated to be provided by the Chinese Information and Culture Center (CICC). It provides various Chinese information and the CICC services via the telecommunication network between the end-users' computer and the terminal of the CICC. Through this connection, the user can not only search the Chinese art and culture information they are interested in, but also acquire the services providing by the CICC Library, Taipei Gallery and Taipei Theater. The intention of this project is to design an electronic information system for the real world. Both interface design and audio-visual aspect …

Interactive Origami, Wilai Asawadechsakdi

Theses

None provided.