Digital Commons Network^™

Design, Graphic Arts, And Environment, Sondra Zalewski

Theses

The environment draws great attention today from many people and businesses. Some companies are beginning to play off these concerns in their marketing approach, while others dodge the topic at all turns. While many people feel we have serious environmental problems, others do not. It is a subject with which everyone is, perhaps, too hasty in their judgment. This thesis project encourages behavioral awareness and provides information from a multitude of sources so that a practical, rather than radical, view may develop. Information surrounding issues about the environment appear in many diverse publications. The sources of information, as well as …

A Hybrid Voice/Text Electronic Mail System: An Application Of The Integrated Services Digital Network, Andrew Mcbride

Theses

The objective of this thesis is to present a useful application for the Integrated Services Digital Network (ISDN) that is expected to one day replace the analog phone system in use today. ISDN itself and its continuing evolution are detailed. The system developed as a part of this thesis involved the creation of an inexpensive "phone terminal" that can serve as an ISDN terminal and also as a bridge to a Local Area Network (LAN). The "phone terminal" provides a hybrid electronic mail system that allows the attachment of speech to text within a message. Messages created with this "phone …

Testing Chromatic Adaption Models Using Object Colors, Elizabeth Pirrotta

Theses

The objective of this research was to determine which published chromatic adaptation model performed best under a single set of conditions. Previous research has been conducted to study chromatic adaptation, develop models and to indirectly test those models. This research directly tested the performance of these models using printed, simple-field, object colors through a successive-ganzfe/cf haploscopic, paired comparison, matching experiment. The chromatic adaptation models tested were CIELAB, CIELUV, Fairchild '91, Hunt '91, LABHNU2, Nayatani et al. '90 and von Kries. The test illuminant was incandescent at 231 lux. Model predictions were calculated for the reference simulated daylight at 2,396 lux. …

Daedalus: Cockpit Flight Management System, Jeffrey Paris

Theses

The purpose of this thesis was to design a portable computer-based flight management system for general aviation pilots.

Interiors, Dana Ranke

Theses

None provided.

Type Pictures: The Life And Work Of Albert Schiller, Michael Keefe

Theses

None provided.

Delicate Intimacies, Jeanne Marie Ferraro

Theses

None provided.

Design, Construction, And Operation Of Water Treatment Plant Residual Monofills, Haitao Bian

Theses

Due to the stringent environmental regulations, landfilling becomes the most viable option for ultimate disposal of water treatment plant (WTP) residues. At present, most states apply the regulations for municipal solid waste (MSW) landfills to the landfilling of WTP residues. This is too stringent since the WTP residues are not hazardous. Therefore, development of suitable criteria for WTP residual monofills is necessary and urgent.

A set of environmental and geotechnical experiments was conducted to characterize WTP residues. It can be concluded that very little leachate will be produced and migration of leachate is unlikely. Also it was noted that insignificant …

Implementation Of An Automatic Mapping Tool For Massively Parallel Computing, Ajitha Gadangi

Theses

In this thesis, an implementation of a generic technique for fine grain mapping of portable parallel algorithms onto multiprocessor architectures is presented. The implemented mapping algorithm is a component of Cluster-M. Cluster-M is a novel parallel programming tool which facilitates the design and mapping of portable softwares onto various parallel systems. The other components of Cluster-M are the Specifications and the Representations. Using the Specifications, machine independent parallel algorithms are presented in a "clustered" fashion specifying the concurrent computations and communications at every step of the overall execution. The Representations, on the other hand, are a form of clustering the …

A Graphical Tool For Timed Petri Nets Using Object Oriented Programming, Baopu Liu

Theses

The objective of this effort is to develop a computer tool for drawing, editing and simulating Timed Petri Nets using object oriented programming. The developed C++ based Timed Petri Net Simulation Tool, TimedPNT, is capable of simulating discrete systems with both deterministic and stochastic delays. Preselection is used for conflict resolution. Performance and utilization results are automatically collected. XView™ Toolkit is used for building the TimedPNT's interactive graphical interface in compliance with AT&T's OPENLOOK® standard on a SunSparc™ IPX running SunOSTM 4.1.2. Compliance with the X Window standard makes the developed tool portable to other X Window based systems.

Graphical Oodb Modeling For Medical Information Standards (Gommis), Jiping Liu

Theses

The graphical representation of database schemata has been a useful tool for the designer and users of database systems. Such a tool for OODB schemata should incorporate a wide variety of symbols which cover most concepts of existing Object-Oriented Database (OODB), so it is sufficient to support a diverse group of object-oriented data models.

In this paper we created a. graphical representation, using the OOdini system and language, of the European Prestandard for Medical Informatics on Message Exchange of Laboratory Information. This European Prestandard describes a standardized format for messages to be exchanged between a. health care provider and a …

Concurrent Engineering And Design For Manufacture In The Medical Device Industry, Martin A. Mathelier

Theses

Concurrent Engineering (CE) is an approach to product development in which engineers work on design and manufacturability at the same time. The ultimate goal of concurrent engineering is to reduce the time-to-market while improving quality. This thesis goes into details about the tools necessary to achieve successful product development in the Medical Device Industry. The novelty of this thesis is not in the tools themselves but rather in the way that they are applied to the medical device industry. The need for the CE approach is of utmost importance because of the vast competition in the medical device industry.

The …

Prediction Of Linear And Non-Linear Components Of Cutter Deflection In End Milling Tools, Kimberly Nazimek

Theses

In this study, cutter length, cutter diameter, depth of cut, and magnitude of the instantaneous force vector are examined to determine their effects on cutter deflection during end milling. Their contributions to both linear and non-linear cutter deflection are examined. Models are developed to compute deflection for both flat and ball end mills. These models are evaluated to determine the contribution of each type of deflection encountered during a variety of milling conditions. A discussion on the transfer of deflection data to an estimation of machining accuracy is then presented.

Intelad : Intelligent Computer Workstation Adjustment Software, David W. Venezia

Theses

Muscular-skeletal disorders are a significant safety concern for professional computer users. Regard for human health, regulatory emphasis, and the inherent cost of the disorders give rise to this point. In an attempt to reduce the risk of injury to computer operators from Carpal Tunnel Syndrome, this body of work provides an easy to use tool capable of determining the near optimal workstation orientation for any operator/workstation combination. Using a unique algorithm and compiled anthropometric data, computer software has been specially developed to map individual workstations in the Cartesian coordinate system. This mapping yields a recommended orientation that is compared to …

Development Of A Non-Intrusive Particle Motion Tracking Technique For Granular Flow Experiments, Jerry R. Volcy

Theses

Implementation aspects of monitoring the position and orientation of a one-inch diameter particle in space non-intrusively based on the principle of magnetic induction coupling are discussed. A radio-transmitter embedded within the particle induces voltages in receiver antennae. Position and orientation of the particle are deciphered from these voltages. A previously developed math model that predicts the voltage induced in an antenna given the position and orientation of the transmitter with respect to the antenna as well as the numerical techniques used to obtain the inverse solution of computing position and orientation from a given set of voltages are used.

Practical …

Investigation Of Reduced Hypercube (Rh) Networks : Embedding And Routing Capabilities, Michalis A. Sideras

Theses

The choice of a topology for the interconnection of resources in a distributed-memory parallel computing system is a major design decision. The direct binary hypercube has been widely used for this purpose due to its low diameter and its ability to efficiently emulate other important structures. The aforementioned strong properties of the hypercube come at the cost of high VLSI complexity due to the increase in the number of communication ports and channels per node with an increase in the total number of nodes. The reduced hypercube (RH) topology, which is obtained by a uniform reduction in the number of …

Measurement Of Heart Rate Variability Using Correlation Dimension And Entropy, Su Zhang

Theses

Heart rate variability regulation is controlled by the autonomic nervous system. Disorders of the autonomic nervous system may cause the loss of heart rate variability. Two new approaches, correlation dimension and entropy, based on ideas from nonlinear dynamics, have been applied to studying heart rate variability. The correlation dimension measures the extent of correlation between the data points. The entropy measures the amount of information needed to specify the state of a system. The interbeat interval signal (1BI) from eighteen subjects (nine normal controls and nine patients with Chronic Fatigue Syndrome (CFS) ) have been analyzed and compared. The results …

Study On The Remediation Of Organic Soil Contaminated With Polychlorinated Biphenyls Using A Variable Frequency Microwave Furnace, Lili Zou

Theses

The development of new and innovative remediation technologies for soil contaminated with Polychlorinated Biphenyl (PCB) is necessary to fulfill the need of cleanup of contaminated sites. In the past eight years the Laboratory for Microwave treatment as Hazardous Substance Management Research Center has investigated the use of Microwave energy to remediate contaminated soils. A major drawback of using single frequencies of the microwave range is the non-uniformity of the electromagnetic field. In this thesis a Variable Frequency Microwave Furnace (operating between 2.40 and 7.50 GHz) is used to improve the uniformity of the field. A new method is used to …

Authentication For Mobile Computing, Andreas Keppler

Theses

Host mobility is becoming an increasingly important feature with the recent arrival of laptop and palmtop computers, the development of wireless network interfaces and the implementation of global networks. Unfortunately, this mobile environment is also much more vulnerable to penetration by intruders. A possible means of protection can be authentication. This guarantees the identity of a communication peer.

This thesis studies the constraints imposed on the mobile environment with respect to authentication. It compares the two prevailing authentication mechanisms, Kerberos and SPX, and tries to make suggestions of how a mechanism can be adapted to the mobile environment.

Sensitivity Analysis In Energy Responsive Design, Bratati Biswas

Theses

Energy responsive design involves the conscious use of climatic elements and natural processes in the design of spaces. Buildings are designed to react favorably with the environment to produce balanced comfort conditions. Passive solar building design utilizes this concept to heat or cool a building by natural means. In this approach, building components and materials are articulated to make maximum use of solar radiation and climatic elements producing energy responsive spaces.

The purpose of this research is to help designers to design with energy in mind. Energy related decisions are required during conceptual design and is not an add-on item …

Sulfuric Acid Resistance Of Fly Ash Mortar, Walairat Bumrongjaroen

Theses

Crown corrosion of concrete pipe and its subsequent repair is a topic much discussed in recent years. Present protective methods have not worked effectively. Due to its properties and its low cost, fly ash was used as a cement replacement of mortar to investigate its sulfuric acid resistance.

Different types and different percentages of fly ashes were mixed with and without admixtures including microsilica, and superplasticizer. The main parameters investigated included the chemical compounds, the fineness and the volume of fly ash. 2"x2" cubes were immersed in a 10% sulfuric acid pond. The weight of each cube was determined continuously …

Pyrolysis And Oxidation Reaction Of 1,2, Dichloroethylene In Ar; Ar And Ch4; Ar, Ch4 And O2 Mixtures, Byung Ik Park

Theses

The thermal reaction of trans-1,2-dichloroethylene (DCEE) in methane and oxygen mixtures in Ar bath gas has been studied in 10.5 mm I.D. tubular flow quartz reactors at I atmosphere pressure, isothermal temperature between 575°C and 1000°C, and times of 0.3 to 2.0 seconds.

The thermal reaction of trans-1,2-dichloroethylene in the gas phase proceeds via unimolecular HCI elimination under the reaction condition of the present experiments. The chain branching C-Cl bond fission reaction is expected to become important at the higher temperature, competing With the HCI elimination.

The decay trans- 1,2- dichloroethylene, intermediates and final product distributions varied in the absence …

An Adaptive Fusion Model For Distributed Detection Systems With Unequiprobable Sources, Yuzheng Zhang

Theses

In a traditional communication system, a single sensor such as a radar or a sonar is used to detect targets. Since the reliability of a single sensor is limited, distributed detection systems in which several sensors are employed simultaneously have received increasing attention in recent years. We consider a distributed detection system which consists of a number of independent local detectors and a fusion center. Chair and Varshney have derived an optimal decision rule for fusing decisions based on. the Baysian criterion. To implement such a rule, the probability of detection P_D and the probability of false alarm …

Fast Point Pattern Matching By Heuristic And Stochastic Optimization Techniques, Ashish Agrawal

Theses

This work is concerned with one of the methodologies used in the final stages of machine vision: the matching of model point patterns to observed point patterns. Conventional search methods not only fail to arrive at the optimal match, but are also computationally expensive and time consuming. To arrive at the optimal pattern match, stochastic and heuristic optimization as the search technique, exploiting Simulated Annealing (SA), Evolutionary Programming (EP) and Mean Field Annealing (MFA), are explored in detail. A comparison of results obtained using SA versus "hill-climbing" and "exhaustive search" techniques, and results of EP are presented. The relative effectiveness …

Fabrication Of Micron-Sized Mirror/Cantilever Silicon Devices For Crosspoint Switching Arrays, Yasser A. Abdel-Aziez

Theses

This thesis describes the fabrication of micron-sized vertical mirrors at the end of horizontal cantilevers, that are electrostatically controlled. The mirrors, 40x 40 μm with thicknesses of 1.5-6 μm, were made by using the etch resistance to 40% KOH etchant of <111> planes and oxide stripes. The cantilever beams, 100 to 350 μm long and 0.44 to 0.81 μm thick, were fabricated using the etch resistance of heavily doped boron layers to 10% KOH at 50 °C. Two technologies to introduce the boron layers were investigated. The ion implantation approach was based on thick oxide/photoresist masking. A maximum doping of 2.5 …

Photoluminescence Study Of Gallium Arsenide, Aluminum Gallium Arsenide, And Gallium Antimonide Thin Films Grown By Metalorganic Chemical Vapor Deposition, John Mark Koons

Theses

The photoluminescence produced by four MOCVD grown epitaxial thin film samples was studied to give insight into sample quality. The four samples under this study were GaAs on a GaAs substrate, Al_.25Ga_.75As on a GaAs substrate, Al_.30Ga_.7OAs on a GaAs substrate, and GaSb on a GaSb substrate. Excitation was achieved through the use of the 514.0 nm line of an argon ion laser, and sample cooling was attained by use of a cryostat cooler using helium gas to attain a low temperature limit of 10°K. The GaAs and Al_.30Ga_{.7O …}

Biomechanical Comparison Of Interosseous And Subperiosteal Flexor Tendon Reattachment, Alisa Beth Olin

Theses

This study was undertaken to biomechanically compare the interosseous and subperiosteal distal flexor tendon reattachment techniques. Twenty New Zealand white rabbits underwent division of the right second and third hind limb profundus flexor tendon distal to the insertion of the superficial flexor. All tendons were repaired using the Kleinnert-Bunnell configuration with a 5-0 nylon tied over a cotton pad on the dorsum of the digit. In half of the animals, the second profundus was reattached into a hole in the middle phalanx and the third profundus was reattached after periosteal stripping of the middle phalanx. The other animals underwent subperiosteal …

Development And Evaluation Of A Nfweav Simulation Model For Weaving Areas Under Non-Freeway Condition, Wen-Min Pan

Theses

The development of a microscopic digital computer simulation model representing vehicle interaction at a weaving area under non-freeway condition is presented. Weaving areas are classified into two categories: 1. Weaving caused by merging and diverging of a ramp with an arterial, 2. On/off ramps connecting an arterial with a highway. The principal characteristics of the simulation model are the following: 1) a car following and lane changing model were used to represent vehicle movements; 2) an anti-collision check algorithm was developed for all vehicle movements; 3) driver merging urgency and follower courtesy model were developed for weaving vehicles. The simulation …

Performance Of National Research And Education Network While Transmitting Healthcare Information Data, Bhavesh Mahendra Shukla

Theses

National Research and Education Network(NREN) is a first step in the process of building a National Information Infrastructure(NII). NII will ultimately lead to Broadband Integrated Services Digital Network(B-ISDN), a network which will support global exchange of voice, data, images and video.

NREN will evolve out of present National Science Foundation Network (NSFNET), also known as Interim NREN. At present NSFNET operates at 45 MBits/sec. By 1996, there are plans to boost the data rate to 155 MBits/sec and to 620 MBits/sec by the turn of century.

In this thesis, present actual NSFNET is simulated using software simulation tool Networkll.5. The …

Design And Implementation Of Ipis : An X-Window Based Image Processing Interactive System, Eduardo Morales

Theses

Most of image processing systems are based on command line functions or can only display one image at a time. This is a serious inconvenience for those who need an interactive system session or want to compare two images processed by different techniques at the same time.

The system was designed with these problems in mind. It is able to display the processed image right after an operation and to display several images simultaneously, making it simple to compare techniques. The system was also created with the purpose to be used in an academic environment. Its structured design makes it …