Digital Commons Network^™

Characterization Of Pulse Duplicator Model For Testing Of Heart Valves, Pankesh Nilkamal Kadam

Theses

The design and development of a pulse duplicator system for testing of prosthetic valves is described. The performance characteristics were evaluated by computing the input impedance of the system from the measured pressure and flow signals for different simulation configurations. The study has been further extended to determine the feasibility of evaluating the cardiovascular status of a patient after major open heart procedure or in state of shock.

Built on hydrodynamic principles, the model allows for a wide range of heart rates, flow rates and mean pressures to be simulated. The artificial circulatory system used as a load to the …

Indicators Of Microbial Activity In Biological Treatment Of Hazardous Wastes, Alexander Mclean Sherrin

Theses

Three methods were used to measure the activity of mixed liquor from the Livingston, N.J. municipal wastewater treatment plant on exposure to phenol. The three methods were, substrate removal rate (SRR), dissolved oxygen uptake rate (DOUR), and the dye reduction rate (DRR). Parameters from each test were compared for reproducibility and ease of determination. The SRR test gave the most reproducible results, while the DOUR test was the least reproducible. Although the reproducibility of the DRR test was close to that of the SRR test, the DRR was more time consuming and required a greater degree of expertise and training. …

Process Hazard Review For Drug Development, Rudolph R. Schwarz

Theses

The development of drugs has become increasingly complex, requiring the use of a wide variety of pharmaceutical actives and isolated intermediates, a majority of which are not always completely characterized with respect to their hazard potential. This can present a source of potential exposure to those who handle these substances during initial drug development, manufacturing of the drug active and ultimately the finished pharamaceutical product. It is, therefore, essential that safety and health information be documented and communicated during the entire drug development process.

The need for application of process hazard review techniques to the development of new drug materials …

Analysis Of Nitrated Polycyclic Hydrocarbons, Pah-Quinones And Related Compounds In Ambient Air, Yalan Wang

Theses

Studies were conducted to characterized airborne particulate extractable organic matter (EOM) with respect to chemical composition and biological activity. It has been well established that the nitrated polycyclic hydrocarbons (nitroPAH) are environmental contaminants. To identify nitro-PAH in ambient air sample, a technique was developed involving introduction of a reducer column into an reversephase high performance liquid chromatography (HPLC) system. Strong fluorescence signals were achieved from nitro-PAH and detected together with u.v. signals for the qualitative and quantitative analysis of nitro-PAH. 2-Nitrotriptycene was synthesized according to published procedures and used as an internal standard. By use of the above technique, 9nitroanthracene, …

Feasibility Of Using Canine Olfaction As A Means Of Detecting Hazardous Substances, Stuart David Messur

Theses

Two specific applications for using canine olfaction as a means of detecting hazardous substances have been recognized: detection of residual contamination on hazardous waste cleanup equipment (DECON), and detection of leaking underground gasoline tanks (LUST).

With the DECON project, the dog's ability to detect low emissions of some common hazardous compounds was tested. As a safe and effective training tool for presenting hazardous compounds to the dog, permeation tubes filled with m-xylene or 1,1,1-trichloroethane were constructed and calibrated. Hidden tubes emitting as low as 0.5 µg/min were consistently detected by the dogs. During olfactory field tests, "hot spots" of m-xylene …

Hardware Based Data Compression System Using Sliding Dictionary Algorithm, Hemant L. Nerurkar

Theses

Popular data compression schemes found in the literature are software based and present innumerable difficulties in hardware implementation. A data compression scheme, which can be directly implemented in hardware using systolic arrays, has been described. The scheme has a remarkable ability to 'adapt' itself to the changing statistics of the source file. Results generated after a comprehensive study and simulations of the algorithm have been presented. The scheme is inherently suitable for parallel processing. It can be incorporated in transmitting devices since it can be fabricated on a single VLSI chip. Comparison has been made with the LZW scheme. A …

Kinetic Study Of Degradation Of Refractory Organic Chemicals : 2, 4-Dichlorophenol, 2, 4-D And Pyridine; Using Ozone/Hydrogen Peroxide/Uv Radiation, Milind K. Pradhan

Theses

In this study Ozone/Hydrogen Peroxide/UV radiation is used to destroy refractory organic chemicals in aqueous solutions. 2,4-dichlorophenol, 2,4-D and Pyridine are the three chemicals used. Hydrogen Peroxide in combination with UV light proved to be most effective in destroying the parent chemical completely. Ozone and UV system was the next most effective system. UV alone was the least effective.

Kinetic study of the Hydrogen Peroxide and UV system was done using a Chemkin program. The results predicted by the Chemkin program matched closely with the experimental results. More work is currently being done using the Chemkin program to study other …

Graphical Interpretation Of U.S. Tidal Data, Vaheh Shahbazian

Theses

Numerous Shore line operations relating to industry and conservation would benefit from convenient access to continuous tidal predictions. Easy Graphical access to continuous long term predictions of tidal heights at a location of interest will simplify operations that are sensetive to tidal predictions. A specific example, is the implementation of a protective measurements against flooding and destruction of shoreline facilities particularly at times of high tides.

This thesis consists of three things. First, rendering NOAA's data in a form accessable to a PC user. Second, it provides a Basic program for prediction of tides. Third , PC user programming Resourses …

A Cad Tool For Edif Model Generation, Sri Nagesh Valluri

Theses

This thesis describes a new CAD tool designed to create models proposed by Electronic Design Interchange Format steering committee. In its present form the system can generate models for standard SSI and MSI devices. The menu driven window based fillup the form features of the tool allows a novice user to provide structural and timing informations of the device from any manufacture's data book. The software performs online checking of the user data and guides them to generate the correct model.

Current Trends In Facilities Planning, Chaochou Yang

Theses

In the past year the costs of computing and computer graphics have come down dramatically. At the same time, the computer graphic system has become easier to use, As a result, computer support has become more costeffective than before.

In this thesis, the writer describes types of systems first, then looks at computer usage. He first defines the technologies of DSS, CAD and MIS, then takes a detailed, step-by-step look at facilities planning and the various ways in which computers are used for support. Well-conceived planning is an important prerequisite to effective computer use. The remainder of the thesis expands …

Xilinx Asic Design For A Single Board Computer, Hong Zhan Ye

Theses

Xilinx Application-Specific IC is a new kind of programmable cell array with high design flexibility and functional density. It not only has excellent circuit-board utilization and low power consumption, but it also offers easy implementation with lower engineering cost and very short production-rampup period.

This thesis provides a complete and specific procedure for implementing Xilinx LCA into a 8052AH-BASIC based single board computer with XACT development system. It verifies all the results from debugging SBC2064 design using both XACT query system and P-SILOS simulator.

The technology of implementing a whole system design with software and hardware fully proves the possibility …

Just-In-Time In The United States : Culture And Competitive Manufacturing, Wolfram Pabst Von Ohain

Theses

Richard Schonberger, 'the' Guru of Just-in-Time' in the United States, wrote in the preface of his 1986 book World Class Manufacturing:

"...Japanese success is rot mature-based. Its basis is a quite different set of concepts, principles, policies, and techniques for managing and operating a manufacturing enterprise. All of it is easy to understand, not hand to accept (once known), eminently teachable and learnable, and not so difficult to apply.

If Just-in-Time is such 'a piece of cake' one would expect that most American companies would practice Just-in-Time. As commonly known, most American companies do not follow the philosophy of Just-in-Time. …

Studies Directed Toward Beta-Cyclodextrin And Capped Beta-Cyclodextrin Mimics Of Alpha-Chymotrypsin, Preston Marlon Canzius

Theses

Molecular mechanics calculations were used to investigate beta-cyclodextrin and capped beta-cyclodextrin as models for the active site of alpha-chymotrypsin. The Amber molecular mechanics force field was used to investigate the effect that addition of the caps has on the conformation of the beta-cyclodextrin macrocycle.

The RMS module of Amber was used to calculate differences in position between the atoms of the minimized mimics and those of the X-ray crystal structure. The deviation in position of the atoms of the minimized capped beta-cyclodextrin macrocycle was found to be larger than that of the minimized beta-cyclodextrin, indicating that the caps do affect …

Separation Of Chromium From Waste Sludges By An Electric Membrane Process, Freeman Nai-Tchun Ho

Theses

The process is characterized by using metallic membrane as a filter which is charged by a separate DC-power supply and it may become experimentally very effective in increasing the separation potency and migration flux. The technique of integrating migration with electromembrane was evaluated for the removal of chromium. The transport was found to be adequately described by an equation in which the rate is proportional to the chromium concentration. The rate of dichromate ions transported across the membranes and the gel water content of membrane increased when the ratio of electromembrane potential and cell system potential was increased. The back …

Construction Loan Proposal : A Model For Contractors, Saeed Ahmed

Theses

This thesis is an attempt to outline a construction loan proposal. The purpose is to provide an average contractor with an insight which could help him toward a preparation of a better proposal and better understanding of the subject matter itself.

Feasibility Of State-Of-The-Art Project Planning Techniques In Pakistan, Ahmed Mansoor Ansari

Theses

The objective of this work is two-fold:

1. Technological transfer of the best suitable state of the art techniques for implementation in the construction industry of Pakistan.

2. A vehicle intended for American readers to gain insight of the present methods of working in Pakistan.

In harmony to the first of the forestated ambitions this work covers subjects widely ranging from introducing the concept of proven scheduling techniques as CPM, PERT to the application of these techniques via advanced computer technology.

Frequently, American professionals and consulting firms are invited to participate to administer or design specialist construction projects in Pakistan. …

Management Training In Small Business, Harry L. Bargholz

Theses

Human Resources Professionals are often faced with the issue of "the need for and usefulness of management training." In addition, small business people believe that the needed training is unwanted and, in somecases, impossible to deliver. On the other side of the issue, training supporters point to the need for knowledge, the constant obsolescence of learned skills and the highly competitive nature of the marketplace.

The argument continues that whereas managers in larger firms may be able to afford numerous in-house training programs or be able to send employees to assorted workshops and conferences, the manager in a small enterprise …

Groundwater Contamination Studies At A Sanitary Landfill In New Jersey, Yau-Chorng Chien

Theses

Edgeboro Landfill, a site used for the disposal of municipal and industrial refuse, is one of the largest landfills in New Jersey. The landfill has been in operation since 1954, serving the solid waste disposal needs of local townships and a major portion of Middlessex and the surrounding counties. The landfill was not equipped with a liner and a leachate collection system at the time of start up. The leachate collection line around the landfill, on-site leachate treatment by three stabilization ponds and subsurface cut-off wall were provided to minimize the discharge of leachate into adjacent waters in 1979. Groundwater …

Energy Analysis Of A Multistory Office Building Using Bin Method Computer Program, Mohammed Nasim Ghauri

Theses

The consumption of energy by an HVAC system in a high rise office building was investigated by comparing results obtained from ASEAM and Trakload (two microcomputer programs) with the manual calculations and DOE-2 (Department of Energy Program) results obtained by Tishman Research Corporation. The study was performed on the Public Service Building of Newark, New Jersey. It is a 26 story office building, designed to be energy efficient.

The results obtained show that, the energy consumed by the HVAC system is a substantial amount of the total energy used but the controlling factors are electrical lighting and equipment. Both of …

Failure Surface Of A Square And Rectangular Reinforced Concrete Members [Sic] Under Combined Biaxial Bending And Tension, Ravindra M. Khanapure

Theses

This thesis describes the development and use of three dimensional strength interaction diagrams of reinforced concrete sections for different loading conditions. It also gives a comprehensive overview of modes of failure surfaces and provides design aids for members subjected to biaxial bending and axial tension. This is the phenomena which is rather overlooked analytically and graphical predictions are made. The computer program provides a special tool for the analysis and fast interation of combination of loadings and moments.

Office Automation, Nanda Kishore Krishnaiah

Theses

This thesis gives an overview of the technology available to management for implementing office automation. It explores the methodology for creating an integrated automated office. It discusses methods for linking automated offices through the concept of networking and it addresses the major behavioral aspects associated with the implementation of automation in the office. The most significant part of this thesis is that the conceptual design model is illustrated by the application to an actual case study. The author was involved as a team member in an automation project with the Center for Information Age Technology, at New Jersey Institute of …

Implementation Of Case (Common Application Service Element) And Application Interface For Manufacturing Automation Protocol, Amit Limaye

Theses

In 1980 General Motors formed a task force committee to explore solution to incompatibility of computer network on machine floor which control programmable devices, Robots etc. After receiving the various existing standards, the committee came up with first draft of Manufacturing & Automation Protocol (MAP 1.0) in April 1984. Further reviews resulted in different versions of MAP standards and presently, efforts are being made to come up with MAP 3.0.

MAP enables information to be readily transferred between computers, people and equipment and thus truely interconnecting open systems. The ultimate goal of these efforts is to be able to produce …

Sorption Characteristics And Their Effects On Geotechnical Properties Of Illite, Gnanmoorthy Selvakumar

Theses

An experimental investigation of the sorption characteristics of phenol, chlorophenol and chlorobenzene on to illite and of the effect of sorption on the geotechnical properties of illite was performed. Various adsorption isotherms have been considered for the equilibrium adsorption study data. It was found that the Freundlich adsorption isotherm closely fits the experimental results. In addition, the results of desorption study indicated that the sorption process for these systems is not completely reversible.

The index properties of illite were found to be influenced by the sorption of contaminants, i.e., the Atterberg limits of illite increased in accordance with increases in …

High Tech Transition And The Organization, Chetan H. Shah

Theses

The future outlook of any corporation depends upon the resourcefulness of those who manage the planning and operating functions of the business. Time and accuracy are two critical criteria in effective managerial reports for decision making. The electronic computer is a welcome addition into the industry. While its applications to payroll, accounting, sales, and inventory have been extensive, computing has nevertheless been criticized. This study concentrates on determining the impact computing has had on the managers and especially on the people working in the organization from clerks to the top level management.

While an investigation of the existing literature was …

Wear And Development Of Wear Testing Methodology, Tirumalai S. Suresh

Theses

The existing wear and friction theories, and wear testing methods have been analysed to meet the objective of this study. One of the key factors in the analysis of a wear problem is the computation of wear and friction coefficient for a material, under real operating conditions. A new wear testing methodology has been developed and a wear tester has been designed and assembled. The tests have been performed at constant sliding speed and different applied loads for a Cast-Iron - hardened Steel pair.

An Investigation Of Quantification Of Image Quality With Respect To Screen Ruling On The Appearance Of Multicolor Print, Yi-Sheng Lu

Theses

Using a finer screen ruling will result in an improved final image quality in the color printing process. Studies have shown that beyond certain screen frequencies any further increase in the number of lines per inch has negligible benefit on multicolor process printing when using the half-tone printing precess. The objective of this research is to quantify the image quality of multicolor process printing by comparing the results of using several different screen rulings. The final image quality was subjectively evaluated based on the appearance of otherwise identical reproductions with the only difference being the screen ruling. The results of …

Images Of My Mind, Mary Loomis Rickman

Theses

Not Included

The Corporate Identity Process: Development & Application, Lisa Grande

Theses

Not Included

Frame Design, Bonnie House

Theses

Not Included

A Series Of Fourteen Posters, Ok-Hee Nam

Theses

None provided.