Digital Commons Network^™

Bio-Mechanics Of The Hip Joint And The Engineering Considerations In The Treatment Of Unstable Intertrochanteric Fractures, Manoj D. Nene

Theses

Numerous previous attempts have been made to determine the magnitude and the direction of forces acting on the hip joint. The mechanism of femoral neck fractures and the frequently occurring failure of its internal fixation has led engineers to analyze the forces involved. An unstable intertrochanteric fracture is one which lacks continuity of the bone cortex on the opposing surfaces of the proximal and digital fragments. A mathematical model is created in this study to examine the 135° and 150° nail plate. The results give an approximate estimation of stresses on the two plates. A 3D finite element model of …

Cascading Space Efficient Variation Of The Lzw Algorithm And Arithmetic Coding, Shobha Raj

Theses

Two known compression algorithms appropriate for communication are LZW and the Arithmetic Coding method. Both are adaptive and require no extra communication from the encoder to the decoder. Here we have considered a space efficient variation of the LZW algorithm which achieves better compression.

We present a scheme to cascade the space efficient variation of the LZW algorithm with Arithmetic Coding into a space efficient data compression algorithm which achieves a higher compression ratio and is appropriate for communication.

Knowledge Based Designing Of Broadband Coaxial Cable Networks, Tauqir Hameed

Theses

The objective of this research was to build a broadband coaxial cable network. One of the basic requirement of a network is the physical link transmission medium. For the purposes of this research, broadband coaxial cable was chosen as a physical medium of data communication. The approach taken in this research was to divide network design into three main steps. In the first step, the decision on topology of the network was determined. Both Star and Minimum Spanning Tree topologies were used and then the Esau-Williams Algorithm was employed to minimize the cable length. In the second step, various signal …

Optimization Algorithms For Shortest Path Analysis, Susan M. Hojnacki

Theses

Discrete optimization algorithms exist for analysis of network optimization of flow problems. Computer programs written from these algorithms can be used for local area network analysis of point-to-point computer networks, transportation networks, resource allocation, distribution, and production scheduling. One aspect of a network that can be optimized using discrete optimization algorithms is the length of the path that data will take when traveling through the network. One node in the network signifies the source node and a second node is the sink or destination. The object is to find the shortest path between the two nodes. The definition of shortest …

Formation Of Low Temperature Silicon Dioxide Films Using Chemical Vapor Deposition, Hsiao-Hui Chen

Theses

Low Temperature Oxide (LTO) thin films were prepared using a Low Pressure Chemical Vapor Deposition process. The process was characterized by applying traditional statistical studies and response surface technique. The uniformities within wafer and from wafer to wafer were examined by determining the mean and the standard deviation of films thicknesses. Response surface methodology was employed to determine the optimum process conditions. Time, temperature and gas flow ratio were used as the experimental factors. Index of refraction and deposition rate were used as the experimental responses. Additionally, etch rate, density, dielectric constant and infrared (IR) spectra were found for the …

Mobile Manipulator Path Planning By A Genetic Algorithm, Min Zhao

Theses

The thesis addresses the path planning problem for a mobile manipulator system which is used to perform a sequence of tasks specified by locations and minimum oriented force capabilities. The problem is to find an optimal sequence of base positions and manipulator configurations for performing a sequence of tasks given a series of task specifications. The formulation of the problem is nonlinear. The feasible regions for the problem are nonconvex and unconnected. Genetic algorithms applied to such problems appear to be very promising while traditional optimization methods cause difficulties. Computer simulation is carried out on a three degrees-of-freedom manipulator mounted …

Biodegradation Of Diflufenican Using Anaerobic Microbial Consortia, Velukumar T. Nanjagowder

Theses

In this thesis I examine the feasibility of using anaerobic microbial consortia from digested anaerobic sludge to degrade Diflufenican, a fluorinated herbicide released into the environment as a result of agricultural usage. The compound is manufactured by Rhone Poulenc and it is an active ingredient of agricultural herbicides. The anaerobic digested sludge served both as a source of microorganisms and as a growth medium. Initial studies were conducted by making a stock solution of 1 ppm concentration of Diflufenican in acetone, the optimal solubility of the compound as suggested in the material safety data sheet is 0.05 ppm in water. …

Work-Preserving Real-Time Emulation Of Meshes On Butterfly Networks, Alf-Christian Achilles

Theses

The emulation of a guest network G on a host network H is work-preserving and real-time if the inefficiency, that is the ratio W_G/W_H of the amounts of work done in both networks, and the slowdown of the emulation are O(1).

In this thesis we show that an infinite number of meshes can be emulated on a butterfly in a work-preserving real-time manner, despite the fact that any emulation of an s x s-node mesh in a butterfly with load 1 has a dilation of Ω(logs).

The recursive embedding of a mesh in a butterfly presented by …

A Three-Dimensional Finite Element Stress Analysis Of Interface Conditions In Porous Coated Hip Prosthesis, Siu-For Yau

Theses

A three-dimensional finite element model of a collar-type hip stem and both the cortical and cancellous bones is used to investigate the stress distributions on an implanted femoral stem, adjacent bone, and specifically at the bone/implant interface for various amounts of porous coating and different stem materials. The finite element model consists of 909 nodes comprising 536 linear eight-node solid brick elements and 176 two-node interface elements. The finite element analysis code employed is SUPERTAB from SDRC. The interface elements consist of coincident-node spring elements and gap elements which model the rigidly bonded and loose interfaces respectively. Local coordinate systems …

Low Pressure Chemical Vapor Deposition (Lpcvd) Of Silicon Carbide From Diethylsilane, Yi-Tong Shi

Theses

The depositions of amorphous and cubic-crystal SiC from a new chemical vapor deposition source, diethylsilane(DES), have been studied. Amorphous SiC thin films and crystalline cubic-SiC materials have been deposited on silicon wafers at temperature lower and higher than 850C, respectively. The activation energy and a reaction mechanism involving the production and subsequent desorption of diethylsilene has been suggested, which explains the observed deposition dependency with the temperature and reactor pressure. A model based on the polymerization of DES is offered and the deposition rate is found to be the result of a large number of simultaneously occuring deposition processes for …

Oscillatory Potentials Model And Parameter Identification, Huizhong Pan

Theses

Two mathematicals model are presented for the oscillatory potentials of the electroretinogram. These models represent the oscillatory potential in terms of sets of parameters whose values may provide information of diagnostic value.

The test setup and protocol for obtaining the oscillatory potentials are described, as well as the data processing including acquisition up to identification of the model parameters.

Data from eight subjects, five normals and three diabetics, were used to evaluate the two models. These preliminary test results show a marked difference in the values of some of the model parameters between normals and diabetics.

A Microengineered Beam Diaphragm Structure For The High Performance Pressure Sensor, Alkesh Shah

Theses

The thesis details the design for a novel microengineered beam diaphragm structure for piezoresistive pressure sensor applications. The beam diaphragm structure is used as a pressure sensing device, within a Wheatstone bridge circuit. The single crystal silicon with [100] orientation is used for the beam diaphragm structure.

It has the advantages of high sensitivity(2.56 v/v/mm of Hg), good linearity(3Kpa to 1.4 Mpa) and overpressure protection with the help of the bosses. It's protection range is about 400 times the standard pressure range. The beam diaphragm structure has two rectangular bosses which are formed by anisotropic etching. Two pairs of diffused …

Low-Temperature Crosslinking Of Polycyclopentadiene, Lawrence Peters

Theses

Cyclopentadiene was polymerized via a Diels-Alder mechanism at 174°C under an inert atmosphere. The polymer obtained after ll hrs of reaction had a low bulk viscosity of 8 cps and a viscosity-average molecular weight, Mv, of up to 3000. An unsaturated polyester was synthesized from maleic anhydride and ethylene glycol in the presence of chlorosulfonic acid at room temperature. The polyester had an intrinsic viscosity of 0.024 cps. At 60°C, polycyclopentadiene (PCPD), and the unsaturated polyester were reacted to yield a viscous liquid which was crosslinked at room temperature over 48 hours in the presence of styrene, triethyleneglycol dimethacrylate (TEGDMA), …

Colorimetric Tolerances Of Digital Images, Mike Stokes

Theses

An environment to derive colorimetric tolerances of images was established and an experiment using this new environment was performed. This environment allows for images to be digitally captured, colorimetrically manipulated, displayed, observed, and statistically evaluated. The visual experiment measured perceptibility and acceptability colorimetric tolerances for images using paired comparison techniques. Thirty-two observers judged six typical photographic scenes displayed on a high resolution color monitor. These scenes were manipulated using ten linear and nonlinear functions in the CIELAB dimensions of lightness, chroma, and hue angle. The tolerances were determined using probit analysis. It was found that scene content did not significantly …

Substitution Of The Statistical Range For The Variance In Two Local Noise Smoothing Algorithms, Marc R. Lapointe

Theses

The statistical range was substituted for the variance in local noise smoothing algorithms proposed by Tomita and Tsuji, and by Nagao and Matsuyama in order to reduce computer processing time. Images of low, medium, and high information content were corrupted by two levels of combined additive and multiplicative noise and were processed by the original and modified algorithms for both the uncorrelated and correlated noise cases. A subjective paired comparison was performed on the resulting images based on four evaluation criteria, and a normalization of the data between observers as well as hypothesis testing were carried out. Under the conditions …

Adaption And Application Of Morphological Pseudoconvolutions To Scanning Tunneling And Atomic Force Microscopy, Andrew D. Weisman

Theses

A recently developed class of digital filters known as morphological pseudoconvolutions are adapted and applied to Scanning Tunneling Microscopy (STM) and Atomic Force Microscopy (AFM) images. These filters are shown to outperform, both visually and in the mean square error sense, previously introduced Wiener filtering techniques. The filters are compared on typical STM/AFM images, using both modeled and actual data. The technique is general, and is shown to perform very well on many types of STM and AFM images.

The Search For The Active Site Configuration Of Glutamate Dehydrogenase I) Reactivity Of Lys-126 Ii) Preparation Of O-Se-Nadp+, Deborah Judd

Theses

None provided.

A Novel Test Structure For Automated Measurement Of Charge Transfer Efficiency In Charge Coupled Imaging Devices, Herbert J. Erhardt

Theses

None provided.

A Parameterized Cmos Standard Cell Library And A Full 8-Bit Grey Scale Morphological Array Processor, Lawrence H. Rubin

Theses

The creation of a parameterized, full custom CMOS VLSI design library is discussed. This library consists of a schematic component library that is integrated with both logic and circuit level simulators, as well as a corresponding layout cell library that is integrated with automatic place-and-route tools as well as several layout verification tools. The library enabled the design and implementation of a Morphological Array Processor (MAP). This VLSI chip fully implements the morphological operations of erosion and dilation using a 7x7 matrix. It will operate on a 512x512 image in real time (60 images per second). The chip is designed …

Thermal Stresses In Closed Spherical Shells, Frank W. Keene

Theses

The purpose of this work is to discuss thermal stresses in closed spherical shells. This effort is further limited to linear thermoelastic stresses in "thin" shells. The basic concepts associated with three-dimensional continuum mechanics are presented in both direct and general tensor notation. The three-dimensional equations are reduced to the two-dimensional equations of shells under going finite displacements. These are subsequently reduced to those pertaining to spherical shells. A review of the recent literature associated with thermal stresses in spherical shells is included. An appendix is provided which reviews some of the basic elements of general tensors.

Generating Just Temperament With Ideal Rate Multiplication, Andrew C. Moore

Theses

I have developed a new rate multiplication method. I call it ideal because the quality of the frequency approximation that it makes is maximized, and it extends the range of its frequency scaling factor to all the rational numbers between zero and one. In addition, each input control code produces a unique output frequency. The input code is necessarily not straight binary, so the circuit is not pin compatible with other rate multipliers. I designed the ideal rate multiplier as a method for easily producing just tempered musical intervals. Even a three bit ideal rate multiplier produces many recognizable musical …

A Comparative Analysis Of The Efficacy Of Zero-Order, First-Order And Monod Kinetic Models In Representing Raw Aerobic Biodegradation Data, Andrew I. Bakun

Theses

A total of 148 raw aerobic biodegradation data sets from batch and continuous stirred-tank reactors were extracted from the open literature and previous NJIT MS theses. Kinetic analysis of each of these data sets was performed with respect to the following commonly used empirical models: (1) zero-order, (2) first-order, and (3) Monod. Two constant-biomass versions of each model were evaluated; one in which So (i.e., the boundary condition for substrate concentration at time equal to zero) was assumed to be equal to the measured value of the initial substrate concentration and the other in which So was treated as a …

Color Variation Of The Gray Balance Target As Related To Color Misregistration In Multi-Angle Halftone Color Printing, Tuo Wu

Theses

This study was to investigate how color variation of a gray balance target was related to color misregistration in the multi-angle halftone color printing process. The dot overlap ping patterns of a gray balance target with 25%, 50% and 75% screen period off-register conditions were simulated on computer; the Neugebauer fractional areas from the ran domly selected thirty-one unit areas were calculated through the application of CAD pro grams and programing. The n-modified Neugebauer equations were then used to predict the colors of the targets and color differences between them. In order to verify the theo retical findings, an experimental …

Visual Determination Of Industrial Color-Difference Tolerances Using Probit Analysis, Gregory Snyder

Theses

A perceptibility study was conducted to visually determine the median tolerance values of 45 color-difference vectors in CIELAB color space using surface mode viewing of paint samples. Nine different color centers, each compris ing five color vectors, were employed to collect a superthreshold dataset. Fifty color-normal observers made quantal judgements under simulated Dg^ illuminant regarding the magnitude of color-difference pairs based on comparisons to a near-neutral color-difference anchor pair. Probit analysis was applied to the response frequencies for each vector to estimate the parameters of the distribution and the median tolerance values. Results indicated the probit adequately models the response …

Performance Analysis Of Symbol Timing Recovery Circuits Employed In Digital Communications Systems, Elisha Yegal Bar-Ness

Theses

An analytical approach is presented for the jitter performance of a timing recovery circuit consisting of a prefilter, a zero-memory nonlinear device, and a narrow band postfilter tuned to the pulse repetition frequency. Assuming first a squarer type of nonlinearity, analytical expressions for the rms jitter in the timing wave are obtained as a function of the pre and post filtering characteristics. These expressions are suitable for judging the case where the baseband signal is bandlimited. Also for some specific examples, the jitter performance of this kind of STR circuit is evaluated.

Secondly, a general type of nonlinerity is assumed, …

Dynamic Analysis Of The Generalized Slider Crank, Sahidur Rahman

Theses

A numerical technique is used to analyze the kinematics of the generalized slider crank mechanism and an analytical technique to derive dynamic force equations for that mechanism has been formulated. The numerical technique used for displacement analysis is based on a combination of Newton-Raphson and Davidon-Fletcher-Powell optimization algorithm using dual-number coordinate-transformation matrices. Velocity analysis is performed by using a dual number method. Finally, dynamic force analysis is accomplished on the basis of the dual-Euler equation and D'Alembert's principle. The approach is developed in such a manner that a digital computer can detect when a solution is possible and then solve …

Task Scheduling For Fms Based On Genetic Algorithm, Hung-Yuan Li

Theses

A Flexible Manufacturing System (FMS) consisting of p automated guided vehicles (AGV's), m workstations and n tasks is studied. The main problem investigated in this thesis is to find an optimal or suboptimal task scheduling for p AGV's among m workstations to complete n tasks.

An efficient approach based on genetic algorithms has been designed and implemented to solve the problem of task scheduling for a FMS. Near-optimal, or even optimal, task scheduling is accomplished by genetic algorithms. Simulation results on the algorithm are also discussed.

Petri Net Modeling And Analysis Of An Fms Cell, Paresh A. Patel

Theses

Petri nets have evolved into a powerful tool for the modeling, analysis and design of asynchronous, concurrent systems. This thesis presents the modeling and analysis of a flexible manufacturing system (FMS) cell using Petri nets. In order to improve the productivity of such systems, the building of mathematical models is a crucial step.

In this thesis, the theory and application of Petri nets are presented with emphasis on their application to the modeling and analysis of practical automated manufacturing systems. The theory of Petri nets includes their basic notation and properties. In order to illustrate how a Petri net with …

Biological Coal Desulfurization, Ming Le

Theses

Sulfur removal from coal before combustion is of considerable interest to avoid emission of oxides of sulfur(SO_x). Chemical and physical methods have been developed for removing the inorganic sulfur component in coal. This component is generally associated with pyrites(FeS2). However, no commerical methods have been developed for the removal of the organic sulfur conponent. This study describes microbial methods for removing organically bound sulfur from coal. The specific goals of this study were to ascertain whether a robust biologically active population such as activated sludge biomass can remove organic sulfur from coal and to devise sulfur analytical methods …

A Parallelogram Four-Frame Model In 3-D Motion And Structure Recovery Using Unified Optical Flow Field Approach, Zhichun Lin

Theses

In this paper a new concept of the unified optical flow field (UOFF) for 3 D motion analysis from a stereo image sequence is implemented which is an extension of the temporal optical flow formulations developed by Horn and Schunck. A four frame model is established and a spatial optical flow is also introduced.

In order to alleviate the problem of the strict requirement of two identical sensors in common stereo imagery a new imaging system is presented in this paper that needs only one camera, two plane mirrors and two switches to generate a phase shifted binocular sequence of …