Digital Commons Network^™

Design Of Governor-Turbine Models In Stability Studies, Vidyanand Swaminathan

Theses

This thesis investigates the effect of hydro governor-turbine models on the steady state stability of an automatically controlled electric power system. Basically two kinds of hydro governor-turbine models, namely, Impulse and Francis type are studied in depth. Design of a compensating network has also been proposed, which can help improve the stability conditions of a power system which employs a poor governor-turbine model.

The power system investigated includes a large sized hydro generating unit connected to an infinite bus via a power network. This generator employs a modern three-channel fast-acting automatic voltage regulator (AVR). For any operating condition, stability results …

Thermal Desorption Of Phenol Contaminated Clay Soils, Chia-Ling Ting

Theses

Clay mineral/organic reactions have been studied extensively by a numerous physicochemical methods. There also has been extensive research done in the areas of adsorption, Lewis acid-base reactions, desorption, adduct formation. Many of these studies explain the role and dehydration of silicates.

Studies have shown through extraction, thermal analysis, and gas chromatography. That there is more than one type of bonding, weak and strong, taking place between the clay mineral and the organic waste.

In order to determine the practicality of the containment technology, this research has been investigated by using more powerful tools, such as thermogravimetric analysis, differential scanning calorimetry …

Strategic Planning For Management Information System, Hsiu-Li Tsai

Theses

The scope of this thesis is to study the strategic and long term planning in Management Information Systems. How can it be better satisfied to support the multinational business environment. A growing number of corporations are using computer-based information systems to manage their global businesses, the growing penetration of mini-and micro computers in the office and administrative environment, have created more attention on the need for a comprehensive and integrated planning in MIS.

Planning should be made from its time horizon and from its focus. It concentrates on the long-range conceptual planning, medium-range managerial planning, and short-range operational planning. They …

Analysis On Dielectric Resonators, Xuan Tu

Theses

This dissertation deals with the studies and analysis of Dielectric Resonators (DR). A shielded dielectric iesonator structure, consisting of the substrate, the spacer, the dielectric resonator and the metallic shielding is modelled theoretically. The theoretical expressions for the resonance fields are derived by using radial-mode matching and axial mode-matching techniques. In these techniques, the structure is divided into partial regions and the fields in each pai tial region are represented in terms of a series of the appropriate modes with unknown coefficients. Matching the adjacent regions yields a system of linear or nonlinear equations — which then are solved. The …

The Effects Of Position And Gender In Evaluating Job Factors, Yen-Yueh Yin

Theses

This study investigated the extent to which corporate recruiters and students share an understanding of desirable job factors. To identify the differences between the two groups, 114 students and 26 recruiters completed a questionnaire on twenty three job factors. Univariate analyses revealed significant differences between the two groups. The implications of these findings for recruitment, selection, and career counseling are discussed.

Application Of Microwave Energy To Remediation Of Soils Contaminated With Chromium, Chih-Ju Jou

Theses

A process based upon microwave treatment has been developed to render soil non-hazardous after that soil had been classified as hazardous due to heavy metal contamination. It has been applied to chromium-contaminated soil. The object of the present regulations is to prevent damage to water supplies as a result of the leaching of heavy metal ions from the soils. This object is expressed in the standard test for leaching, namely, the EPA EP Leachate test. This process can be used to immobilize metal ions sufficiently to meet the aforementioned standard. The present standard is based upon acid leaching, and not …

A Computer Program On The Economics Of Collection And Sortation Of Recyclable Materials In Municipal Solid Wastes, Ara Nigogos Kahyaoglu

Theses

The first version of the economic of recyclable materials in municipal solid waste analysis program was developed in interpretive BASIC by Rutgers the State University of New Jersey. Since BASIC is a line interpretative language several restrictions were encountered, the major one being the language size restriction.

The first objective was to obtain a truly portable program that would not be dependent on specific compilers and operating systems. The second objective was to generate a program that had the capability for expansion.

The C language was used over other high level languages such as PASCAL and FORTRAN because it had …

Study Of An Analytical Method For Benzo(A)Pyrene Metabolites In Human Urine, Zheng Ouyang

Theses

A method developed by Becher and Bjorseth for analysis of PAH metabolites in urine was employed to investigate human exposure to benzo(a)pyrene (BaP) - an ubiquitous environmental carcinogen. Preliminary results are presented showing the relationship between exposure to BaP and urinary elimination. Although the correlation between the two variables is not statistically significant, there appears to be a positive association with selected exposure varibles such as smoking. The identification of an association may establish urinary BaP as a marker of exposure.

However, detailed study of the analytical procedure indicated that recoveries with this method were as low as 3-8% for …

Organics In Ambient Air By Collection On Tenax, Thermal Desorption,And Capillary Chromatography With Parallel Fid/Ecd Analysis, Chih-Hsiang Liao

Theses

Volatile organics in ambient air were regularly collected on Tenax cartridges at high (10 ml/min) and low (5 ml/min) intake flows. These Tenax samples were analyzed by using a Tekmar Automatic Thermal Desorber and capillary GC system with parallel flame ionization (FID) and electron capture detectors (ECD). A series of quality assurance procedures has been established to improve and assure the accuracy and precision of sample collector and analysis. These procedures relate to performance of the Tekmar thermal desorber, recovery efficiency from the Tenax, and include studies on breakthrough and co-elution. The results demonstrate (1) that from ambient air data …

A Non-Invasive Technique For Burn Area Measurement, Jong-Daw Yu

Theses

The need for a reliable and accurate method for assessing the surface area of burn wounds currently exists in the branch of medicine involved with burn care and treatment. The percentage of the surface area is of critical importance in evaluating fluid replacement amounts and nutritional support during the 24 hours of postburn therapy. A noninvasive technique has been developed which facilitates the measurement of burn area. The method we shall describe is an inexpensive technique to measure the burn areas accurately.

Our imaging system is based on a technique known as structured light. Most structured light computer imaging systems, …

Rays And Beams Near The Shadow Boundary, Weixing Gao

Theses

Asymptotic techniques in wave propagation problems exhibit attractive features in computational aspects compared to numerical methods. However, they experience problems in complicated environments due to the transition regions associated with them. The transition region involving a shadow boundary in the downward refractive index profile has been investigated. The ray paths were determined solving the ray equation analytically. The Green's function due to a line source is constructed and evaluated using numerical integration (reference solution) and asymptotic techniques. Then, the field produced by the source, is synthesized, using superposition of beams generated from complex source point representation. The floating parameters such …

Estimation Of Thermodynamic Properties Of Petroleum Fractions To Supplement The Aspen Simulator, Steven E. Sund

Theses

The objective of this study was to develop a method of estimating hydrocarbon pseudocomponent data in a format that is consistent with the ASPEN simulator. Although algorithms exist to estimate the pseudocomponent properties, no comprehensive program exists for the public version of ASPEN. A computer program was developed which will take a minimum of input data and can generate the necessary pure component properties for an ASPEN simulation. The program is meant to complement the ASPEN simulator, so the input is similar to ASPEN's input. The output can be incorporated directly into an ASPEN input or can be of the …

Caldac, A New Approach To Computer-Assisted Theatrical Lighting Design, David William Zalewski

Theses

CALDAC, which stands for Computer-Assisted Lighting Design and Control, is a design environment integrating two present day state-of-the-art theatrical lighting computer aides, the computer-aided design (CAD) program and the preset storage system. The CALDAC environment also features On-Screen Stage Simulation, a newly proposed design tool. It is shown that this integration offers a strong advantage to the lighting designer and his/her crew.

The thesis begins by introducing the concepts of theatrical lighting design and the evolution of computerized control. The basics of CAD for the lightplot design are presented, followed by an introduction to the concepts of on-screen stage simulation. …

Simulation And Off-Line Programming Of Robotic Workcells, Krishnaprasad V. Kamisetty

Theses

A typical, complex robotic workcell, namely NJIT's Flexible Manufacturing System (FMS) cell has been designed, modelled and simulated to bridge the gap between design and its implementation. McDonnell Douglas' (McAuto) PLACE, BUILD, COMMAND and ADJUST have been used to simulate entire cycle of the NJIT's FMS cell. Various aspects such as "Cycle Time Analysis", robot reachability of various positions in the cell and "Collision Detection" have also been studied and analyzed.

The ease of effecting any modifications to the existing workcell design has been demonstrated. The NJIT's FMS cell consists of the GE P-50 robot, the IBM 7535 robot, the …

User Interactive Compensation For Si/So Systems Via Root-Locus, Shih-Mim Liu

Theses

A powerful computer-aided root-locus method is described and applied to the compensation for SI/SO systems. The approach is based on the concept of continuation methods in which the solution of a parameterized family of algebraic problems is converted into the solution of a differential equation and incorporates the quadratic synthetic division technique. The root-locus is obtained in a systematic manner by numerical integration. Breakaway points are analyzed and classified according to the properties of higher order derivatives. A Turbo Pascal(4.0) program which utilizes the algorithm has been written.

Removal Of Contaminants From Clay Soils By Thermal Desorption, Wen-Ming Mao

Theses

The objective of this study was to investigate the removal of contaminants from clay soils by thermal treatment. There were two phases involved in this project. The first was a study of equilibrium adsorption of clay - organics study, and the second was the determination of the thermal desorption characteristics.

Three organics, phenol, chlorophenol, and chlorobenzene and one clay soil, bentonite, were selected for these studies. The first phase, involved the simulation of the isothermal adsorption simulated the process of contaminants being sorbed onto bentonite. Three different isotherm models,viz, Linear isotherm, Freundlich isotherm, and Langmuir isotherm were evaluated with experimental …

Multiphase Solid-Liquid And Solid-Liquid-Gas Mixing In Stirred Tanks, Jessyca Susanto

Theses

A number of investigations can be found in the literature on the effect of mixing parameters on solid-liquid dispersions in agitated systems. However, the determination of the effect of impeller clearance on minimum suspension speed has received little attention. This work is mainly focused on the determination of the effect of the impeller clearance on N_js (the minimum agitation speed required for complete solid-liquid dispersion) and its corresponding power consumption, using both radial and axial impellers in stirred tanks. In addition, the effect of other significant parameters on N_js was also investigated.

The importance of the impeller clearance …

Methods Of Achieving High Speed On Data Flow Machines, Chung-Lin Yu

Theses

Simultaneity is a key to high speed and large computation. Assuming hardware components of a given speed, it is the only remaining consideration in achieving raw speed. Simultaneity can be shackled by dependencies, however, and years of hardware and software work have been devoted to understanding the types of dependencies and how they can be obeyed or removed from a computation.

In this thesis, the principles of the data flow machines and the structure of the data flow languages are illustrated. Various methods of achieving high speed are discussed. These methods include streams, Lenient Cons (I-structure), and dependence-driven computation, which …

Unified Study Of Trellis Encoded Correlative-Fm, K. Narendra Bhat

Theses

Trellis encoding of correlative-FM is studied from the point of view of the overall structure, performance, bandwidth occupancy, and complexity. Here, correlative (partial-response) coding is used to improve the bandwidth efficiency of MSK (Minimum-Shift Keying) at the expense of performance. Then, trellis codes are used to improve the error-rate performance of the corresponding correlative-FM scheme with little or no increase in bandwidth occupancy (compared to uncoded MSK). In a sense, this is similar to Ungerboeck's coding for (memoryless) PSK modulation.

A new encoding approach, called matched encoding, is used here that produces trellis coded modulations achieving greater coding gains than …

Thermal Decomposition Of Dichloromethane In Hydrogen/Oxygen/Argon Mixtures And In Pure Oxygen, Wen-Pin Ho

Theses

The thermal decomposition of Dichloromethane in hydrogen/oxygen mixtures and argon bath gas was carried out at 1 atmosphere total presure in tubular flow reactors of varied surface to volume (S/V) ratio. The thermal degradation of dichloromethane was analyzed systematically over temperature ranges from 610 to 820°C, with average residence times in range of 0.1 to 2.0 seconds. Five reaction sets in three different size flow reactors were studied.

It was found that the complete decay ( 99% ) of the dichloromethane at 1 second residence time occurs at about 810°C for all the reactants ratio sets. The major products for …

A Cmos Robotic Lan Interface Integrated Circuit Design, Yong-Bin Kim

Theses

This thesis describes the design including specification, schematics,logic and circuit simulation, and standard cell layout for a CMOS mixed-mode I.C. for interfacing sensors into a robotics local area network. The network accepts up to 256 interface chips as nodes in each area. A simple network protocol permits acquisition of digital data from the interface nodes through gateways into ARCNET and MAP.

The sensor chip interfaces directly from analog signals of range 0-1V and 0-20mV. It contains an 8-bit ADC. The application I.C. interfaces to sensors for pressure, tactile stress, humidity, temperature, etc.

Each of the sensor interface node I.C.s is …

Experimental Evaluation Of J-Integral For Fiber Reinforced Concrete Subjected To Impact Loading, Piyushkumar Patel

Theses

This research presents an experimental Evaluation of J-Integral for Fiber Reinforced Concrete Subjected to Impact Loading. Three-point edge notched bend specimen were employed in evaluation of J-Integral using both the multi-specimen, and the single specimen techniques. In the multi-specimen technique three different notch lengths were employed for extracting the energetic fracture parameter J_Ic. In the single specimen technique, the method developed by Rice[13] was used to evaluate J_Ic at three different notch lengths.

Different proportions of fiber were employed in determining the J_Ic values. Experimental results from present study indicates that the J_Ic values calculated …

Optimal Design Of Prestressed Concrete Members Using Numerical Techniques, Nasseruddin Syed

Theses

This research consists of the application of nonlinear optimization techniques for the economical design of prestressed concrete members. A computer program using Lattice and Matrix methods of optimization is employed for least weight design of I-shaped prestressed concrete girders. The program calculates the most optimum values of the cross-sectional dimensions.It has the freedom to impose any constraints on any of the design variables, including sectional dimensions, eccentricities, concrete cover and limiting stresses.

Comparison of results obtained in this thesis with other analytical methods indicate that with the advent of computers, the numerical methods have a definite advantage over other analytical …

Spectrum Analysis Of Heart Rate Variability, Xuming Wang

Theses

This research investigated the respiratory influence on heart rate variability. The heart rate spectrum was obtained from the heart rate variability signal which was extracted from the electrocardiogram We then studied the magnitude of the respiration peak in the heart rate spectrum and examined the dependence of the magnitude of this peak on breathing frequency, subject and day.

An experiment designed to simultaneously acquire the electrocardiogram and the respiration signal was conducted on ten people ranging from 22 to 55 years of age (3 females, 7 males). Three tests were performed on each subject. In each test, 2 different postures …

A Study Of Volatile Organic Compound Emissions In The Ambient Air Of A Sanitary Landfill In Richard W. Dekorte State Park, New Jersey, Minsen Gao

Theses

A study was made of 15 volatile organic compounds (VOCs) in the ambient air emissions of a sanitary landfill located at Richard W. DeKorte Park, Lyndhurst, New Jersey. The samples were collected from July 1986 to September 1987 at 10 designated landfill sites over the selected time period from 4 to 24 hours by drawing the air to be analyzed through a Tenax trap. An average 10 to 15 liters of air sample was collected each time. Sample analysis is done on a Varian Gas Chromatograph (GC) combined with a Tekmar Thermal Desorber. A standard gas mixture of the 15 …

Statistical Multiplexing Of Video Sources For Packet Switching Networks, Krishna Kancherla

Theses

Communication networks are fast evolving towards truly integrated networks handling all types of traffic. They employ integrated switching technologies for voice. video and data. Statistical or asynchronous time division multiplexing of full motion video sources is an initial step towards packetized video networks. The main goal is to utilize the common communication channel efficiently, without loosing quality at the receiver. This work discusses the concept of using statistical multiplexing for packet video communications. The topology of a single internal packet network to support ISDN services has been adopted. Simulations have been carried out to demonstrate the statistical smoothing effect of …

Nonlinear Variants Of The Least Mean Square (Lms) Algorithm, John George Van Saders

Theses

Adaptive systems using the LMS algorithm or its variants usually require bilinear correlation multipliers with high dynamic range and large bandwidth. The class of LMS-type algorithms utilizing zero-memory limiters (on one or both correlation multiplier inputs) to reduce dynamic range are examined. The correlator limiters may be included to simplify the hardware implementation or may arise due to limited dynamic range of the loop components. The application of a theorem due to Price provides a technique for simplifying the analysis, which otherwise might be extremely difficult. The analysis provides closed-form expressions for the mean weight convergence behavior, permitting examination of …

Arithmetic Pipeline Analysis Package Ii, Sai K. Vedantam

Theses

This work describes the implementation of arithmetic pipeline scheduling algorithms, to enhance an existing simulation package. The user need only specify the arithmetic equations to be processed and the required stage configuration. The program automatically performs the tasks of forming the reservation table, building the pipeline and specifying the input/output connectivity for each segment and multiplexer in the pipeline. This package integrates two existing simulation tools and enhances many aspects of the previous programs.

The main application area for such a tool is education. Since it is very easy to use and requires little or no time for one to …

Trellis Coded Partial-Response Channels, Kumari Yalamanchili

Theses

Binary partial-response channels with transfer functions (1+D), (1-D) and (1 — D²) are intersymbol-interference channels which find applications in baseband data communications and magnetic recording systems (tapes, discs, compact discs, etc.). In this thesis we develop a coding technique for improving the reliability of digital transmission over noisy partial-response channels with the above transfer functions. We do so by introducing a new concept, called matched encoding, which arises in the context of trellis coding for channels with memory.

We use inner and outer trellis coding of the partial-response channels. The inner codes called matched inner coset codes, are …

Thermal Decomposition Of 1,1,2- Trichloroethane In Hydrogen In Tubular Flow Reactors At Atmospheric Pressure, Chen-Chung Yeh

Theses

The decomposition of 1,1,2-trichloroethane in a hydrogen gas bath was carried out at 1 atmosphere total pressure in three different surface to volume ratio flow reactors. Temperature ranged from 440 to 850 °C and the residence times studied were in the range 0.2 - 2.3 seconds. Application of the first order rate expression to this data yields a linear relationship for each temperature studied and thus global rate constants for loss of reactant were determined.

It was found that conversion of the reagent was a function of both temperature and residence time. The major products observed are 1, 2-dichloroethylene (CHClCHCl), …