Digital Commons Network^™

Review Of Construction Management Procedures Of New Jersey Department Of Transportation With The Objective Of Minimizing Claims, Suresh Kumar Ceyyur

Theses

Recent years have evidenced a growing spate of construction claims being filed against NJDOT. A mail survey was conducted and problem areas of NJDOT construction management procedures frequently contributing to claims have been identified. NJDOT's pre-construction scheduling system has been reviewed to suggest improvements and practical integration to obtain effective feedback. NJDOT's organizational structure has many administrative bottlenecks and is overly bureaucratic. An analysis reveals that by way of minimal revamping and by integrating design and construction divisions better coordination can be achieved, bureaucratic norms reduced and the structure made resilient to react quickly to claim situations. Sources and causes …

Microcomputer Controlled Continuous Activity Monitor For Small Caged Animals, Yogesh Parekh

Theses

The task of this instrumentation system is to measure the activity of rats in a controlled experiment. The system is designed to work in conjunction with the system for studies of metabolic rates in rats. The interface circuits take the picture from a video (vidicon) camera into the computer. Once the picture frame is taken into the high resolution graphics screen memory area, the computer uses this data to detect the activity. The movements of the rat are detected by comparing the number of pixels changed between two consecutive picture frames. The area covered by the rat determines the standing …

The Impact Of Microcomputers On Engineering And Technical Management Functions, Salvatore Savino

Theses

The purpose of this study was to investigate the perceptions of managers as to the effect of computers on management functions.

Manager perceptions were determined by using a ratio scale of value ranging between 0 and 100. Findings are based on questionnaire responses of 121 top, middle, and lower managers in 120 firms in the United States.

Several hypotheses were examined in the study relative to (1) perceived computer impact on management levels, (2) perceived computer impact on the traditional functions of management, (3) perceived computer impact on levels and functions of management (interaction).

Support was provided for hypothesis of …

Application Of The Self-Assessment Technique To Improve The Productivity Of The Project Engineering Function : A Case Study, Roman Stetkiewych

Theses

While traditional industrial engineering methods can be successfully applied to improve productivity in the operations area, their effectiveness is limited where knowledge type work is being performed. For these types of activities, self-assessment has been proposed as a methodology to achieve increased efficiency. This thesis presents the results of applying this concept to the engineering function of a manufacturing firm.

Using a directed set of questionnaires as a focus, a self-assessment of itself was conducted by the Project Engineering Department to consider how well it thought itself to be performing and what its deficiencies were. Co-jointly the departments whose work …

16-Channel Signal Analyzer For Electroencephalograms, Junnyih Chiang

Theses

An instrument has been designed to analyze 16 channels of EEG of a squirrel monkey by using several interface boards controlled by an Apple II computer. This instrumentation system is capable of performing these experiments in an automated manner. It stores the data generated on to a floppy disk, with software control and results may be printed out together with related graphs. Because of the limitation of the floppy disk capacity, we had only developed two versions:

(1) To average the EEG signal up to 8 times for all 16 channels, because a lot of memory is needed to save …

Scheduling Effects Of 5-(3,3-Dimethyl-1-Triazeno)Imidazole-4-Carboxamide (Dtic) And 1,3-Bis-Chloroethyl-1-Nitrosourea (Bcnu) On Mouse Melanoma Cells B16cl5, Gracie V. Coffey

Theses

DTIC and BCNU have been demonstrated to have enhanced chemotherapeutic effects in mice bearing Bl6 mouse melanoma cells. The order of administration seems to be important in maintaining optimum effects. This was shown is a study by Hill et al. (unpublished).

In the present study, mouse melanoma cells, Bl6CL4, were treated with either DTIC or BCNU. The drug was allowed to remain on the cells for 2, 3, or 4 days. The drug-containing media were then removed, the cells were washed and fresh medium was added. The cells were incubated in an atmosphere of 5% CO2 and 95% air at …

The Biodegradation Of Phenolics Using Mixed Liquor From Passaic Valley Sewerage Commissioners Plant, Newark, New Jersey, Daewon Pak

Theses

The biological degradation of phenol, O-chlorophenol, and 2,6-dichlorophenol was studied at room temperature in aerated 5 liter batch reactors using mixed liquor from Passaic Valley Sewerage Commissioners Plant (Newark, New Jersey). From the concentration versus time data, kinetic rate constants were determined for phenol (at 100 ppm), 2'-chlorophenol (at 20 ppm), and 2,6-dichlorophenol (at 10 ppm). Air stripping and adsorption were determined to be insignificant removal mechanisms for the three compounds studied.

It was noted that the biodegradation rates increased after the organisms were acclimated to 100 ppm phenol. In addition, on substrate exposure, the degradation rate increased from the …

Digitally Implemented Klapper-Kratt Fm Detector Using The Intel-292o Digital Signal Processor, Chang-Hwan Park

Theses

This thesis describes and analyses a digitally implemented FM detector, which is a new member of the family of FM detectors introduced by Drs. Klapper and Kratt.

The properties of the new detector are low delay, excellent sensitivity, extreme linearity, and compatibility of components with integrated circuit technology.

A working model is implemented by adapting FIR digital s signal processing methods, and is realized using the Single-Chip Digital Signal Processor Intel-2920 which is comprised of micro-processor, scratch-pad data RAMs, program store EPROMs, A/D and D/A conversion circuitry, and I/O circuitry.

The performance of the working model shows very good linearity …

Analysis And Application Of Automatic Guided Vehicle Systems, Mansuk Bae

Theses

It is the intent of this thesis to analysis the practical applications of Automatic Guided Vehicle Systems (AGVS) as a vital aid in the development of material handling operations within a variety of business sectors.

An evaluation of basis concepts, structural components, practical applications and benefits, and future accessments of AGVS, in terms of material handling are fully discussed. Additionally, a computerized simulation model that calculates "How many Automatic Guided Vehicles Are Needed?" under specific factory conditions and external environmental factors, is both tested and result evaluated.

The author concludes that the use of AGVS as a method for material …

Computerized Instrumentation System For Indirect Measurement Of Metabolic Changes In Rats, Holger Tebbje

Theses

This work describes the further development of a system for the measurement of the energy expenditure of rats. Based on the concept of indirect calorimetry the respiratory exchange is monitored in a controlled experiment. Rats are held in cages through which air is drawn and analyzed. Transducers and sensors, interfaced to the computer, are measuring the composition and the physical parameters of the gas entering and leaving the chambers. The data recieved is processed, displayed on a screen, printed and stored for later analysis.

The accuracy and repeatability of the system improved by measuring additional parameters like barometric pressure and …

Digital Fm-Demodulation Using Digital Signal Processing Techniques, Peter Wagner

Theses

This thesis presents the results of research in the area of digital demodulation of FM signals. The first part of the thesis describes the performance of digital Hilbert-transformers and Differentiators that are optimized in a determined bandwidth. These digital filters are used to build a digital Klapper-Kratt detector. According to this procedure, the coefficients of the digital Klapper-Kratt detectors up to the filter length N=25 are calculated and the resulting discriminator ripple computed and evaluated. One suggested algorithm gives the opportunity to balance the detector at a certain center-frequency. The major part of this thesis describes a new approach towards …

Human Factors In The Design Of Computer Graphics Input/Output Interfaces, Michael Uche Amadi

Theses

Computers are used for solving problems of various kinds and therefore, if the users are to fully benefit from the systems, they must be considered during the earliest stages of the system development. There are three major classes of computer users namely: naive, managerial, and scientific-technical. These users have different characteristics that the designer must consider within his/her system. Only by including such distinctions will these user groups each be able to perform at their respective optimum levels. Just as there are different users, there are also numerous applications to which computers can be applied. This thesis will be restricted …

Standardization, Certification Its Impact On Electronic Systems Manufacturing, Lawrence M. Johmann

Theses

This thesis is a result of an in-depth study of the standardization and certification process in various countries throughout the world. The study was undertaken due to the general lack of readily available information on the subject and problems the author encountered while involved in standardization and certification activities at his previous place of employment.

The thesis discusses product and process standardization and certification and its impact on electronic systems manufacturers. First, the need for standardization and certification is established and its history is reviewed, then the various types and classifications are addressed. Subsequently, standardization in the United States, in …

A Study Of The Human Resources Principles Applied To Telemarketing Programs, Marian Elizabeth Jones

Theses

The objective was to study organizations which have established telemarketing programs to understand the impact of distinct human resources principles used to establish and maintain the sales unit. A questionnaire was developed to determine whether telemarketing programs, which are specifically designed to recruit, select and train inside sales forces, differ from the programs used to do the same with outside sales forces. Furthermore, the sample population was asked whether telemarketing programs contribute to the overall success of the telemarketing force by catering to the special needs of inside sales people. This questionnaire was sent to a sampling of companies who …

An Examination Of Modulation In Shipley S1400 Positive Photoresist As Resist Thickness Varies, Mary Kay Swan

Theses

A method of determining photoresist image modulation was investigated and utilized, in determining the effect of varied resist thicknesses on modulation for both a high and low contrast system. Modulation is defined in terms of maximum and minimum energy required to clear a line/space pattern in the resist image. In This study, useing the resist as the threshold detector, chemical contrast is compared to physical contrast in terms of modulation. Shipley's MF314 and MF312 are the two different contrast development systems used. This study has shown that beyond 11700 Å of resist thickness, physical modulation is reduced to a measure …

Psychic Expression Through Image-Making, Donna De Palma

Theses

None provided.

Terrestrial Invertebrates Of The Virgin Islands, Wendy Jackelow

Theses

None provided.

The Pathological Indications Of Diabetes Mellitus, Patricia Gast

Theses

None provided.

Color: A Semiotic Approach (A Video Tape Presentation), Michele Italiano

Theses

None provided.

Anatomical Study And Illustrative Plates Of The Dwarf Galago Primate, Hugh Nachamie

Theses

None provided.

Brief Looks, Mary Jo Llewellyn

Theses

None provided.

Identity Mark Evaluation And Organization Project, Brian Bennett

Theses

None provided.

A Study Of The Effect Of Ink Viscosity On Dot Gain In Offset Lithography, David Dailey

Theses

Dot gain is the enlargement which takes place in a dot from the time the dot is captured or generated on the film until it is printed. Dot gain can cause many problems, including color variation and loss of contrast, and if uncontrolled is one of the main contributors to waste in offset lithography. Of the many factors influencing dot gain, inks have been found to be a major contributor. One property recommended for further investigation is ink viscosity, which is the resistance to flow of an ink. The purpose of this study was to investigate the effect of ink …

The Creative Imagination, Dorothy Sholtis

Theses

None provided.

Object With Pattern/Rubberstamps And The Metal Cutout, Joan Riccardi

Theses

None provided.

Novel Array Representation Methods In Support Of A Microcomputer-Based Apl Interpreter, Daniel Fleysher

Theses

Objective: To study novel ways of representing data arrays for potential application in a microcomputer-based APL interpreter. The goal is to find, for arrays containing mixed integers and real numbers, a way to improve both storage efficiency and thruput, over that obtainable using conventional APL interpreter array representations. Investigation: For the purposes of this study, three representative APL operators were chosen for implementation - dyadic addition, multiplication and selection. To establish a set of base cases from which to work, these three operators were implemented for two distinctly different data structures: Case-0: arrays containing only fixed length floating point data …

The Power Of Images, Helen Santelli

Theses

None provided.

Model Automatic Focusing System For Linewidth Measuring Instruments, John Ingraham

Theses

This paper discusses research on an automatic focusing system for IC-linewidth measuring instruments. The instrument incorporates a collimated light source, a device to move a sample in small, precise increments, and a charge-coupled device. The autofocusing model would measure the step-height of a dielectric sample and correlate the height to a focus position. Thickness of samples on an enlarged scale were measured to verify the feasibility of this device.

Clouds, Joanne Todaro

Theses

Not Included

Nexus: Painting As A Link To A Primary Reality, Karen Sardisco

Theses

None provided.