Digital Commons Network^™

Ibm/Xt-Based Automatic Monitoring Instrumentation System For Eating Behavior Studies In Rats, Binghong Gui

Theses

An auto-feeding system based on the IBM-XT microcomputer has been designed for use in the anti-obesity research program in the Pharmacology Department at Hoffmann-La Roche Inc. By using this system, experimental rats can be automatically fed, some which have been given anti-obesity drugs and some which have not. The system can also collect data, such as eating times and food intake, which are used for studying the rat's eating behavior.

The system is designed to control thirty six cages with one experimental rat in each cage and it performs three functions:

1 ) To automatically dispense a preset quantity of …

A Dynamic Set-Based Multiaccess Protocol For Local Area Networks, Parul S. Nanavati

Theses

The packet-broadcasting technique brings together the advantages of both packet switching and broadcast communication. The central problem of a packet broadcast network is conflict resolution among the users sharing the broadcast communication link. Collisions are the major source of transmission errors which degrade the performance of a LAN. Proposed here is a novel multiaccess protocol which offers full communication resources to the user at low traffic requirements. It dynamically adjusts the number of users allowed to access the medium at heavy traffic requirements such that number of collisions are reduced and thus maintains the efficient utilization of the medium and …

Reliability Problems In Semiconductor Lasers, Ajay R. Patel

Theses

The stability and reliability of semiconductor laser is dependent on its design, fabrication, and output power. The best way to assure high reliability of these devices is by accelerated aging test and by selection of strict and meaningful criteria for the acceptance or rejection of a particular device. In this thesis emphasis is given on different failure mechanisms that are known. As new development takes place, other mechanisms may be found. Catastrophic degradation, gradual degradation, darkline defects, and contamination during the fabrication process are the main source of device failure.

The noise generation and the packaging issue of semiconductor laser …

Microprocessor Testing And Computer Aided Diagnosability Of Digital Circuits, Shirish Patel

Theses

Computer Aided Diagnosability Of Circuits (CADOC), a new method is developed for isolating and pin-pointing a faulty device in digital circuits. CADOC is based on graph-theoretic principle and PFD numbers. Without considering any SA1 or SAO faults, we can zoom out faulty device by selecting different diagnostic path to narrow down the faulty region and to isolate the faulty device. The efficiency of this new technique is confirmed by applying the technique to many examples.

Reliability Evaluation Of Liquid Crystal Displays Under Accelerated Test Conditions, Ishatdev Singh Rathore

Theses

This thesis deals with the recent study of reliability of liquid crystal displays. This study determined the effects of high temperature on LCD reliability. To accomplish this, reliability life testing was done on different kinds of LCD samples under different operating conditions. The tests were carried out on the samples of two different vendors at two different temperatures. No humidity was added in any test.

Vendor No. 1

1. 120 units at 77° ± l° C.

2. 80 units at 85° ± 1° C.

Vendor No. 2

1. 60 hard and 60 soft glass units at 77° ± 1°C.

2. …

Culture Analysis In A Merger Environment, Dorairaj Sharathram

Theses

The effects of the merger upon the People Express Airline company is studied with particular emphasis upon changes in corporate culture and structure.

A case study approach utilizes an extensive literature search and interviews with People Express executives. It is confirmed that the structural change has led to the cultural change.

With a unique style of management structure and culture, People Express, due to its own mistakes and problems, quickly lost its market share and allowed itself to be taken over by Continental Airlines a subsidiary of Houston based Texas Air Corp.

It is interesting to note that the corporate …

The Changing Role Of The Electric Utility Rates Manager, Richard J. Tutela

Theses

The Changing Role of the Electric Utility Rates Manager will examine the rapidly changing functions of the electric utility rates and regulatory affairs executives. It will explore the changing attitudes, responsibilities, concerns, and required resources of the incumbents. Moreover, it will project and examine the issues which will be of major concern before the turn of the century.

Expectations are that the future functions associated with managing electric rates will soon be significantly different than those in recent past. Further, expectations are to find that if some specific issues which are projected to be of major concern are not properly …

Analysis Of Spread Spectrum System Using Direct Sequence Technique In Jamming Environment, Kandarp A. Vyas

Theses

A spread spectrum system is a means of transmitting data over a channel In addition it offers a wide variety of features like data security and signal hiding This work studies in detail a spread spectrum system using direct sequence binary phase shift keying. The Sliding Correlator and Sequential Detector techniques have been used to achieve synchronization. A brief study of pseudorandom noise has been presented. System was simulated on UNIX using 'c'. A modified version, suitable for software implementation, of Sliding Correlator and Sequential Detector was, used. Results generated using tins model are presented here.

The State And Future Of Televised Professional Training Systems, Robert Michael Brady

Theses

This paper investigates the topic of televised professional training -- that is training and educating managers and technical professionals via live or videotaped television broadcasts. The investigation begins with a description of how some typical educational networks operate; it then goes on to analyze in a strictly theoretical sense, some of the advantages and disadvantages that such a system would have compared with the traditional methods of offering continuing education; it then discusses the results of two specially prepared surveys -- one addressed to the administrator/manager, and one addressed to the student. These areas are then united in a final …

An Investigation Of Interrupt Handling Schemes In Pipeline Processors, Shailesh Ratilal Gami

Theses

In order to acheive higher performance in a pipeline processor, proper interrupt handling is essential. In a pipeline processor, interrupt handling is difficult because many instructions are in the processor at the same time. This study describes and evaluates the different solutions to interrupt handling. Several pipelined 32-bit microprocessors have also been studied and their architectural and programming features are compared.

Performance Of Single Dwell Serial Synchronization System, Chan-Yee Hsiung

Theses

By using the sampling theorem, the problem of the detection of a signal in white Gaussian noise, reduces to the consideration of the sum of the squares of statistically independent Gaussian variates. If the transmitter and and receiver are not synchronous, then no data transmission is possible and the decision statistic has a central chi-square distribution. Otherwise, the decision statistic has a non-central chi-square distribution. Also, this. paper presents a method to calculate the mean and variance of the acquisition time which are the most important parameters to evaluate the performance of a PN spread synchronization system. In addition, the …

Development Of 8052ah-Basic Based Single Board Computer Ii, Suping Lou

Theses

8052AH-BAISC Based Single Board Computer II ( SBC II ) is designed and developed for the application in biomedical instruments as an embedded central processing unit. SBC II offers powerful function in digital signal acquisition, storage and processing, smart on-board EPROM programming, various preipheries supporting and custom supervisor program. The techniques of design and development of SBC II includes computer aided circuits analysis and schematic, optimal design algorithms and computerized setting up SBC II prototype.

This thesis combines the analysis of SBC II circuitry, set up and operation of the complete computer aided electrical circuit design software OrCAD/SDT specifics in …

Rf Characterization Of A Directly Modulated Ingaasp Buried Heterostructure Laser Diode, Charlotte Alvarez

Theses

The use of fiber optics for the transmission of microwave signals had its beginnings in 1984. Applications were limited to the lower microwave frequency regions. Technology in this field is advancing rapidly due to the high demand driven by the telecommunications community for high speed digital applications. Extensive research and development efforts are underway by both the component manufacturers and the subsystem end user. Most of the near term applications of microwaves in fiber optics are in weapon systems and communication systems for military and other government agencies.

The high frequency modulation characteristics of Lytel's InGaAsP 1300 nm buried heterostructure …

Messaging, The Effects Of The Use Of Voice Mail On The Use Of Electronic Mail, Terese M. De Troia

Theses

A number of office automation products have evolved over the years to address the messaging needs of organizations. The 1800's brought us telegraph systems which led the way for teletype and Telex systems, followed by facsimilie, computer-based message systems, document based electronic mail and, most recently, voice store and forward (or voice messaging) systems (Advances in Office Automation, 1985). Voice messaging systems, a newly emerging method of communications, are having a significant impact on communications. The concept of messaging services is rapidly gaining acceptance in business communities (Girishankar 1986, Hirschheim 1985). With costs rising and time becoming more valuable, organizations …

Two Domain Heat Transfer Studies Using A Coupled Finite-Difference And Boundary Element Programs, Serap Dikmenli

Theses

An iterative coupling of a finite-difference boundary layer code "STAN5"' and a boundary element code "BEASY"2 have been used to study two dimensional convective-conductive problems. The coupling method essentially leaves undisturbed the codes of these programs and uses their custom features in their applicable domains. The boundary layer program is used-in the convective domain, while "BEASY" is used in the solid domain. Compatability conditions are established between these domain solutions and an iterative scheme is used until these conditions are mutually satisfied.

The indirect communication of compatability (boundary) criteria between these programs was achieved by two editor/data-transferor like programs. Combined …

Independent Equations Method For Power System State-Estimation, Shun-Gee Lin

Theses

The problem of power system state estimation (PSSE) is to convert the available. redundant and noise contaminated measurements, and other information into a best estimate of the state of the system.

Methods to solve the PSSE, including the sub-problems of bad data presence detection, identification and reconstruction, are reviewed. The Independent Equations Method (IEM) was selected for in-depth study and analysis.

The tree method for bad data identification is tested and failed due to the suspected ill-conditioning of the sensitivity matrix. For bad-data reconstruction, the IEM fails as described. Modifications that saves computing time and ensures reconstruction success are presented …

Interface To 8052ah-Basic Microcontroller For A Multichannel Priority Interrupt System, Chen-Tung Mo

Theses

This thesis presents the design and development of a system with the capability to detect up to forty channels of signals generated from different analog sources and to process them under the control of a microcomputer.

The present work offers the design and implementation of a hardware interface unit in a multichannel real-time data acquisition system as well as the application software program to operate it. This kind of system can be widely used in process control, musical instrument interfacing, and machine automation.

This interface unit follows the general instrumentation architecture in both signal processing and logic control. The software …

High Frequency Gaussian Beams Solution Of A Plane Wave Coupling Into Cylindrical Cavity, Christine Issa Mourad

Theses

Propagation of high frequency fields as a superposition of Gaussian beams instead of geometrical ray fields has potential advantages in complicated environments because the beams do not fail in ray optic transition regions. While the Gaussian beam method can be made rigorous through self consistent stacking of displaced and tilted beams on a Gabor phase space lattice, with retention of full beam spectra, computation is facilitated when the propagation domain is covered with paraxially approximated nontilted beams. The spectral deficiencies introduced by this simplified propagation model depend on the propagation environment. They are examined here for a plane wave coupling …

Analysis And Simulation Of Chirp Radar System, Tina Tsung Tsai

Theses

This paper consists of a technique to design a Chirp radar system and proposes a solution to optimize the design of the linear time delay network required in such systems. A Chirp radar system has a wide bandwidth for high range resolution, and long pulse duration for high velocity resolution and high transmitted energy. The technique of a pulse compression system offers a means of increasing the average power available to illuminate radar targets without any loss of the resolution at the receiver needed for the tactical requirements of the system. This is accomplished by transmitting a wide pulse in …

Automatic Generation Of Robot Paths For Waterjet Cutting From Autocad Drawings, Samir Vij

Theses

The automatic generation of robot paths for a commercial water-jet cutting system by establishing a link with a commercial CAD system, in an attempt to achieve paper-less manufacturing and to minimize human interface is the objective of this thesis.

Water-jet cutting is an emerging technology with unlimited potential for a wide variety of manufacturing applications. Water-jet cutting systems integrated with robotic work cells allow the user to cut a variety of parts through part programs generated for robot controllers. The system employed is an Ingersoll-Rand water-jet cutting system, the movement of which is controlled by an Allen-Bradley 8200R programmable robot …

Design Of A Fiber Optic Oxygen Sensor Based On Immobilized Hemoglobin, Mendu Govind Raj

Theses

The fiber optic Oxygen sensor consists of a thin layer of immobilized deoxyhemoglobin at the common end of a bifurcated fiber. Immobilization is done using the alginate gel procedure. The immobilized reagent is separated from the standard oxygen sample by the gel with or without semi-permeable membrane, and the entire configuration is enclosed in an oxygen free sample cell. Light from a tungsten-halogen lamp, filtered through a 405nm filter is passed through one arm of a bifurcated fiber to the sample cell. The reflected intensity (a highly polished aluminum foil or a plate is placed at the bottom of the …

Seaforms, Karen Louise Wright

Theses

None provided.

Design And Implementation Of A Simulator For A Local Area Network Utilizing An Ibm Pc/At Or Compatible Computer, Christian G. Midgley

Theses

The purpose of this project is to provide a fixture which may be used as a local area network for a course similar to the Small Systems Workshop course (EECC756) as taught in the spring of 1986. This fixture will provide the physical layer of the local area network. This network would be Ethernet like but use an RS-232C communication between the fixture and the nodes. In addition to simulating the ether the fixture would provide for on-line analysis of the packets being sent to provide feedback to the student as well as the professor. The IBM PC/AT type personal …

A Study In Music Visualization, Charles Marsh

Theses

None provided.

Port-A-Map, Viriya Pungthong

Theses

None provided.

An Investigation Of Consumers' Preference For A Typestyle In Relation To A Display Poster, Brad Weaver

Theses

None provided.

A Colorimetric Analysis Of Color Variation Due To Changes In Simulated Ink Trapping, Mary Louise Bulger

Theses

The purpose of this study was to address, through colorimetric analysis, color variation as it relates to the efficiency of trapping. A developing awareness of colorimetric analysis in the graphic arts, as well as the realization of some of the limitations of densitometry when applied to color analysis provided impetus for such a study.

Comparison Between Edge Tracing And Slit Tracing In The Measurement Of The Otf, J. S. Perron

Theses

A study was performed to compare two methods of measuring the Optical Transfer Function (OTF), namely edge tracing and slit tracing, to evaluate the performances and limitations of each method. Edge tracing is a very common method of measuring the OTF of an optical system. It is simple to set up, but the sampling size is limited and derivation of the Edge Spread Function is required in order to obtain the Line Spread Function (LSF). This derivation induces considerable high frequency noise. A competing method, slit tracing, is more complex mainly because of physical limitations such as the actual slit …

Criteria For Identifying Artistically Talented Students In Elementary Education, Mary C. Tevlin

Theses

To objectively identify an "artistically talented'' student in an elementary art class is a difficult procedure. Many processes have been used in recent years in order to place these art students in gifted art programs.

This paper examines the literature describing many tests and procedures that have been used to assess students in the area of visual arts ability. It examines research identifying the behaviors and characteristics of visually talented art students and has formulated a questionnaire for teachers to use when identifying artistically talented students in elementary education.

The questionnaire was piloted in one school district. Revisions were made, …

The Kingdom, The Power, And The Glory, Craig Varjabedian

Theses

None provided.