Digital Commons Network^™

Marks: The Adorned Self, Tom Santelli

Theses

None provided.

"Because Social Issues Should Be Addressed", Cathrine Ackerman

Theses

None provided.

Performance Analysis Of Symbol Timing Recovery Circuits Employed In Digital Communications Systems, Elisha Yegal Bar-Ness

Theses

An analytical approach is presented for the jitter performance of a timing recovery circuit consisting of a prefilter, a zero-memory nonlinear device, and a narrow band postfilter tuned to the pulse repetition frequency. Assuming first a squarer type of nonlinearity, analytical expressions for the rms jitter in the timing wave are obtained as a function of the pre and post filtering characteristics. These expressions are suitable for judging the case where the baseband signal is bandlimited. Also for some specific examples, the jitter performance of this kind of STR circuit is evaluated.

Secondly, a general type of nonlinerity is assumed, …

Multistage Interconnection Networks : Improved Routing Algorithms And Fault Tolerance, Kuo-Yu Chen

Theses

Multistage interconnection networks for use by multiprocessor systems are optimal in terms of the number of switching element, but the routing algorithms used to set up these networks are suboptimal in terms of time. The network set-up time and reliability are the major factors to affect the performance of multistage interconnection networks. This work improves routing on Benes and Clos networks as well as the fault tolerant capability. The permutation representation is examined as well as the Clos and Benes networks. A modified edge coloring algorithm is applied to the regular bipartite multigraph which represents a Clos network. The looping …

Task Scheduling For Fms Based On Genetic Algorithm, Hung-Yuan Li

Theses

A Flexible Manufacturing System (FMS) consisting of p automated guided vehicles (AGV's), m workstations and n tasks is studied. The main problem investigated in this thesis is to find an optimal or suboptimal task scheduling for p AGV's among m workstations to complete n tasks.

An efficient approach based on genetic algorithms has been designed and implemented to solve the problem of task scheduling for a FMS. Near-optimal, or even optimal, task scheduling is accomplished by genetic algorithms. Simulation results on the algorithm are also discussed.

Petri Net Modeling And Analysis Of An Fms Cell, Paresh A. Patel

Theses

Petri nets have evolved into a powerful tool for the modeling, analysis and design of asynchronous, concurrent systems. This thesis presents the modeling and analysis of a flexible manufacturing system (FMS) cell using Petri nets. In order to improve the productivity of such systems, the building of mathematical models is a crucial step.

In this thesis, the theory and application of Petri nets are presented with emphasis on their application to the modeling and analysis of practical automated manufacturing systems. The theory of Petri nets includes their basic notation and properties. In order to illustrate how a Petri net with …

A Parallelogram Four-Frame Model In 3-D Motion And Structure Recovery Using Unified Optical Flow Field Approach, Zhichun Lin

Theses

In this paper a new concept of the unified optical flow field (UOFF) for 3 D motion analysis from a stereo image sequence is implemented which is an extension of the temporal optical flow formulations developed by Horn and Schunck. A four frame model is established and a spatial optical flow is also introduced.

In order to alleviate the problem of the strict requirement of two identical sensors in common stereo imagery a new imaging system is presented in this paper that needs only one camera, two plane mirrors and two switches to generate a phase shifted binocular sequence of …

Simulation Of Voice And Data Integration, Urmila S. Patel

Theses

A simulation model of integrated voice and data is developed. The data packets are transmitted during voice inactivity (i.e. silence duration). A statistical model of voice (talkspurt) and silence duration is generated. inter-arrival time between data packets is modeled using geometrical distribution. The data traffic statistics is simulated for a given voice activity model and various data packet arrival rates. Four important results are obtained by performing this simulation: 1. Average data packet delay versus arrival rate. 2. The optimal ratio of data packet arrival rate to average data packet delay. 3. Probability of wait time for various data packet …

Size Reduction Of Polymeric Particulates By Jet Milling, Cheng Hua

Theses

A basic theory for the size reduction operation by jet milling has been developed.

Typical samples of feedstock have been analyzed using screen analysis to determine the initial distribution of polymeric particulate sizes prior to jet milling.

A statistical theory .was developed using probabilities to represent the likelihood that specific size reductions would occur. These probabilities include the effects of various equipment.

The theory was then used to predict the distribution of polymeric particulate sizes after jet milling. The agreement between the predictions and actual results was within 5 %.

Encouraged by the successful work of the simulation of the …

Design For Manufacturability, Kocherlakota Sreedhar

Theses

Design for Manufacturability represents a new awareness of the importance of design as the first manufacturing step. It recognizes that a company cannot meet all its objectives with isolated design and manufacturing operations. The Design for Manufacturability approach embodies certain underlying imperatives that help maintain communication between all components of the Manufacturing and Design system and permit flexibility to adopt and to modify design during each stage of the product realization. Design for Manufacturability cannot be bought or sold and it should be implemented by management. Complete support of management to the implementation is very important to the success of …

Design For Manufacturability : Re-Design Of Pencil Sharpener For The Ease Of Assembly, Amit R. Rathod

Theses

A Design For Manufacturability (DFM) approach is used to analyze the existing design of a pencil sharpener, and to reduce and re-design the parts of pencil sharpener for the ease of assembly. The procedure for the selection of a suitable and economical assembly method is based on the Boothroyd and Dewhurst methods. Analysis of the initial design for manual assembly and re-design for automatic as well as manual assembly is presented. An algorithmic approach for simplified generation of all mechanical assembly sequences and selection of the assembly sequences is presented using De Fazio and Whitney approach.

The Design And Testing Of A Personal Computer Controlled Scanning Acoustic Microscope For Orthopaedic Surgical Applications, Hubert Heinrich Berndt

Theses

This thesis describes scanning acoustic microscopy and ultrasonic image processing to characterize and evaluate materials of known properties, as well as novel materials. This work describes the assembly and testing of a PC based device for nondestructive evaluation of bone materials for usage in orthopaedics research. It includes the identification of some hardware problems and their solution, and it also describes different image processing techniques that have been developed and applied in this work. In a growing number of disciplines it has been discovered that an acoustic microscope can provide new information, especially about the elastic properties of specimens and …

Development Of An Adaptive Fuzzy Shell Clustering Algorithm And Validity Measures, Kurra Bhaswan

Theses

In objective functional based fuzzy clustering algorithms the weighted sum of the distances of the feature vectors from cluster prototype are minimized. The fuzzy memberships are utilized as weighing factors. The cluster prototype can be a point or a line or a plane, etc. This work extends the recent concept of using curved prototypes by utilizing the Adaptive Norm Theorem proposed by Dave¹ to develop an algorithm for the detection of fuzzy hyper-ellipsoidal shell prototypes. The Objective functional associates a norm for each cluster in which to measure the proximity of the shell prototype adaptively. The resulting implementation necessitates …

The Bandwidth Allocation Of Atm Control By Neural Networks, Jin-Syan Chou

Theses

In this thesis, we develop a neural network method based on Adaptive Resonance Theory to train and control the optimum bandwidth allocation of ATM network. In Broadband Integrated Service Digital Network (BISDN), the Asynchronous Transfer Mode (ATM) is already adopted as the transfer facility by CCITT. ATM is a high-bandwidth, low- delay, fast-packet switching and multiplexing technique. Using ATM technique, we can flexibly rearrange the network and reassign the bandwidth to meet the requirement of all types of services. As an effective optimization method, Genetic Algorithm (GA) is applied to implement the bandwidth allocation of ATM. Then, we use Adaptive …

A Modified M/G/1/N System And Its Application, Bernice Annette Figueroa

Theses

We study a single server queueing system with finite buffer, Poisson arrivals and exceptional service requirements for the first customer in each busy period. The system is studied as a Markov Chain and the limiting probability distributions are obtained. The explicit form sorution for the queue length distribution, blocking probability, waiting time distribution as well as the busy period are derived through the Laplace-Stieltjes transform method. These results are then applied to a tandem system with a finite buffer in front of the first station and no intermediate buffer between the two stations. Finally, similar results are obtained for the …

The Neural Network Based Control System For Dynamic Channel Allocation In Pcn Communications, Ching-Yao Huang

Theses

A neural network based control system (NNCS) is adopted in this paper to conduct the channel allocation task in the personal communication networks (PCN). Binary adaptive resonance theory (ART-1) that was modified for pattern matching and provided the corresponding responses is selected as the basic algorithm for the system. Digital portable radio technology can provide reliable access to high quality wireless service for many users. Low power transmission requirement and small cell size configuration that can support more users and diverse services than cellular radio system are the attractive attributes of PCN. Assigning multiple time slots to a user in …

Automatic Infrared And Visual Inspection Of Solder Joints On Pcbs, Jiang Huang

Theses

This thesis reports the research results of automatic inspection of solder joints on printed circuit boards (PCBs). The previous work on this regard has been advanced significantly in the following three aspects. With the application of some microlens and the principle of geometric optics solder joints of real size are inspected in this work instead of larger simulation solder joints in the previous work. A new set of features is formulated and used for infrared inspection. Consequently, better results have been achieved in this work.

Reasonably good results demonstrate the capability of infrared inspection of solder joints on PCBs. Once …

Computer Graphic Simulation Of Sweeping Of Solid Objects, Jr-Jyun Jang

Theses

This thesis is on the computer graphic simulation of the swept volume of a solid object undergoing Euclidean motions (including translation and rotation). The study helps visualize different types of Euclidean motions and supports the previously developed swept volume theories by providing graphic realism.Included in the thesis presentation are the following :

1. Description of Euclidean motions of polyhedral objects, using ruled surfaces to represent swept volumes.
2. Representation of sweeping of solid objects, -using parametric cubic equation and sweep differential equation.
3. Simulation of motions of PUMA and IBM robots.
4. Wire-frame and shaded image displays of swept volumes.

Expert System For Blown Film Extrusion, Jiachyi Li

Theses

Expert systems and blown film extrusion are two subjects to deal with in this thesis. Expert systems are an aspect of artificial intelligence, or a computer's ability to think. The determination of a suitable expert system for particular problem is an important factor in current societies. Blown film is extruded as a continuous tube which is air cooled, collapsed, and wound onto a roll as a double layer of film. Such film, if heat sealed and perforated, makes a roll of bags. There are many factors that affect blown film extrusion. Therefore, using expert system to evaluate blown film extrusion …

Application Of Expert System For Control Of Heating Distribution Network : A Case Study, Jun Li

Theses

The use of an expert system for the heating distribution network is an application of artificial intelligence to the domain of energy engineering.

The development of an expert system for a heating distribution network is explained. The expert system is implemented through the software Kee. The expert system is used to monitor the heating distribution network, and to complement some functions of the controls such as balancing the system pressure, stabilizing output, in addition to fault diagnosis, system process simulation. It serves also as a medium to system moniting, and operator training. Many other functions will be developed on the …

Workstation Allocation Schemes For Response Time Improvement In A Multiserver Pc Lan, Asit V. Merchant

Theses

Microcomputer Local Area Networks have recently become quite popular. Higher demand in term of number of users who contribute a variable amount of load has led to Multiple File servers in a LAN. As a result of variable load, response time at workstations differ significantly depending not only on total load on the network but also on workstation distribution across servers. The goal of this study is to develop schemes to keep response time as low as possible and constant among workstations. This study is based on minimizing response time and containing it or keeping it constant by distributing workstations …

A Comparative Study Of Image Coding Techniques : Filter Banks Vs. Discrete Cosine Transform, Hosam Fawzi Mutlag

Theses

Subband coding of still image frames using Binomial PR-QMF has been presented in this thesis. Simulation results have shown that the performance of subband coding using a low complexity coder is practically the same as the performance of the industry standard (8 x 8) DCT based image coder.

A low bit rate adaptive video coding technique is also introduced in this thesis. The redundancy within adjacent video frames is exploited by motion compensated interframe prediction. The Motion Compensated Frame Difference (MCFD) signals are filtered by employing Binomial PR-QMF structure into four subbands. Then, the subbands are quantized using an efficient …

Analysis And Implementation Of A Navigation System Using Vanishing Points In A Generalized Environment, Rolf Schuster

Theses

The development of accurate sensors is of crucial importance in navigation of mobile autonomous robots. The following master's thesis analyzes the use of vanishing points for robot navigation. Parallel lines in the environment of the robot are used to compute vanishing points which serve as a reference for guiding a robot. To accomplish the navigation tasks, three subtasks are to be performed: detection of straight lines, computation of vanishing points, and robot navigation with vanishing points.

An edge detection algorithm is presented that combines Sobel and Laplacian of Gaussian operators. The algorithm preserves the precision of the Laplacian of Gaussian …

Controlling Hazards Associated With Confined Spaces, Srinivas S. Varahabhotla

Theses

Work in Confined Spaces poses special health and safety problems. To avoid the serious consequences which may follow poorly planned or poorly supervised confined space work, a comprehensive program of recognition, evaluation and control of potential dangers must be developed.

The work force should be aware of the extreme dangers associated with confined space and of the procedures and equipment used to overcome these dangers effectively and safely.

The purpose of this thesis is to present the hazardous conditions in a confined space and different means of overcoming these dangers which are not readily apparent. It shows how confined spaces …

Implementation Of Automated Assembly, Kang H. Kong

Theses

Research has shown that about 60 - 80% wealth producing activities is related to manufacturing in major industrial countries.

Increased competition in industry has resulted in a greater emphasis on using automation to improve productivity and quality and also to reduce cost.

Most of the manufacturing works such as machining, painting, storage, retrieval, inspection and transportation have changed to automation successfully, except assembly. Manual assembly is predominant over automatic assembly techniques due to inherent assembly problem and the fact that the assembly machines lack the innate intelligence of human operator and lack sufficient flexibility to changeover when product designs and …

A Mouse-Driven Interface For Androx Ics-400, Chin-Tien Chen

Theses

A mouse-driven interface is extremely useful for software performing image processing tasks. This thesis describes an implementation of a mouse-driven interface for the Androx ICS-400 image processing board. The Androx board is housed in a Sun 4/330 running a UNIX-based operating system. The main goal of this interface is to provide a consistent and friendly user interface for image processing tasks and integrating the Sun window libraries with the Androx libraries. Various image processing tasks, such as gray scale and binary morphological operations, histogram, thresholding, filtering, spot, logical operations, arithmetic operations, zooming, scrolling, rank and image acquisition are implemented in …

A Process For Implementing Cim In A Small Manufacturing Facility, Tushar R. Desai

Theses

This work is dedicated to small manufacturing enterprises seeking to explore Computer Integrated Manufacturing (CIM) technology, which is the recent trend in the manufacturing world. The main theme of this thesis is to improve productivity, product quality and reliability, and to reduce costs by integrating various discipline in small manufacturing environment, using computer technology.

To achieve this goal, a hypothetical small manufacturing company was chosen as a subject. The typical functional and organizational structures were analyzed and possible problem areas were highlighted. The problems relating to manufacturing process were studied in detail, and possible solutions were proposed to computerize the …

Implementation Of A Production Planning And Control System In A Small Manufacturing Company, Carmelo Pernice

Theses

This thesis analyzed and discussed the implementation of a production control system in a small manufacturing firm. The basic concepts of production control were provided to give insight on the methodologies typically applied in production control systems. Overviews were presented on Material Resource Planning, Capacity Planning, and Shop Floor Control, as well as any supporting methodologies and technologies.

As with any project, some investigation was done in order to choose a system which best suits the company's needs. At Teledyne Adams, The DCD Shop Floor Control System was chosen since it is capable of handling batch manufacturing as well as …

Bad Data Identification In Power Systems, Shichun Zou

Theses

Two classes of bad data (BD) identification methods in power system state estimation are studied.

The first class is the perturbation method. In this method, the obtained measurements are perturbed a few times. Each time a state is obtained from which measurement corrections are calculated. The statistics of the corrections corresponding to a BD are different from those corresponding to a healthy data. The method uses those differences for identification purposes.

The effectiveness of different indicators is studied. These include the normalized residual, the weighted residual, and residuals incorporating the statistics of the corrections.

The success rate of using the …

Performance Evaluation In Terms Of Congestion And Flow Control Of Interconnected Token Ring Local Area Networks, Muhammad Salim Raza

Theses

In an interconnected network, if user demands are allowed to exceed the system capacity, unpleasant congestion effects occur which rapidly neutralize the delay and efficiency advantages. Congestion can be eliminated by using an appropriate set of traffic monitoring and control procedures called flow control procedures. This thesis first investigates the major technical concepts underlying the token-ring technology; performance and flow control issues and then gives an approximate analytical solution in terms of mean end-toned delay in a system of token-ring local area network interconnected through bridges. The analytical solution is based on an approximation of the mean end-to-end delay in …