Digital Commons Network^™

Velocity Studies In A Vertical Pipe Flowing Full, Robert Franklin Tindall

Masters Theses

"The purpose of this investigation is to install a hard drawn copper pipe approximately 1/2 inch in diameter, and approximately 35 feet long in a vertical position. The copper pipe is to have pressure takeoff points at various distances along the length of the pipe. The purpose of these takeoffs is to measure the pressure of the water at the point of takeoff in the pipe. The water is to be forced into the pipe, assisted by gravity, thereby causing a pressure of some measurable quanity [sic] greater than absolute zero pressure. The discharge was to be by volumetric measurement, …

An Experimental Study Of Crystallization In Opal Glass, William C. Rous

Masters Theses

"Opal glasses are well known from use in such forms as ointment jars, lighting globes, wall panelling [sic], and decorative effects in glass vases. Cryolite, fluorspar, and sodium fluosilicate are used in varying proportions in most glasses of this type. Since little is known of the mechanism of crystallization in opal glass, there is a definite need of gathering further information on this subject. This information is of particular interest to the manufacturers whose products consist of this type of glass. Further information would aid in control of the characteristics desired and perhaps would allow a more economical control"--Introduction, page …

Design And Test Of An Apparatus For Rate Measurements Of Rapid Gas Reactions, Erich Rolaff

Masters Theses

"The present study on rapid gas reactions was initiated with two main goals in view. The first objective was the development of equipment and methods for the treatment of problems arising in extremely rapid gas phase reactions. In recent years, with the advent of large scale applications of gas turbines and rocket motors, the process of high speed gas reactions, especially those of combustion and oxidation have become of increasing importance...The second main goal of the work was to apply the methods and equipment developed to the investigation of chemical systems of interest"--Introduction, page 1-2.

Effect Of Removed Web-Section On Critical Load For I-Beam Columns, Henri Simon Rigo

Masters Theses

"This investigation deals with a series of column tests of aluminum I-sections which have a perforated web. Specifically, the tests show that the weight is decreased without decrease in strength. Several basic assumptions are made in the design of a column. The physical action of a column is idealized in the derivation of formulae which will predict within reasonable limits the load which the member will sustain. In a given installation of non-homogeneity of material, kinks, uneven bearing, lack of symmetry due to riveting or welding, stress concentration and many other disturbing factors not in agreement with these assumptions may …

The Application Of The Relaxation Method To The Solution Of Steady-State Heat Transfer Through A Concentric Square Insulator, William Edward Simpkin

Masters Theses

"It is the object of this thesis to express the relationship between the heat transfer through a square insulator of variable inside-outside dimension ratios, in terms of a concentric round insulator of the same inside-outside diameter ration, by means of a continuous curve. Mathematically speaking, this thesis will have a plot of a variable coefficient, c_s, to be used...in terms of the ratio of the width of the outside square to the width of the inside square"--Statement of Problem, page 8.

The Precipitation-Runoff Relationship On The Grand River Basin Of Missouri And Iowa, J. Kent Roberts

Masters Theses

"In the study of a drainage basin which is to be utilized for water supply or water power, there is frequently a dearth or complete lack of runoff data, though precipitation data are almost always available. The Water Resources Branch of the United States Geological Survey maintains gaging stations on various streams and runoff records from these streams are available from their publications and offices. Many of these runoff records cover a considerable number of years, and are entirely sufficient for use in an analysis of any drainage basin covered by such data. Some of these gaging stations have not …

Temperature Fluctuations Within A Solid Of Finite Thickness, William Sanford Hogan

Masters Theses

"The object of this thesis is to determine by analytical methods the temperatures within a homogeneous plate of finite thickness subjected to a constant temperature on one side and a periodically fluctuating temperature on the opposite side. The heat flow in the other two directions is considered negligible in this problem. Periodic changes of temperature are frequent in nature and in engineering. The surface of the earth is heated periodically by the sun in its daily and annual cycle and the periodic temperature changes below the surface and the question to which depth these changes are appreciable were dealt with …

Separation Of Copper And Zinc On Synthetic Resins, Ernest Joseph Breton

Masters Theses

"It was desired to know whether ion exchange resins could be of value to the metallurgist in the recovery and separation of metals. The recovery and separation of copper and zinc from dilute solutions on Amberlite IRC-50, a carboxylic resin, and Amberlite IR-120, a nuclear sulfonic resin, were investigated. It was found that Amberlite IRC-50 could effectively remove copper ions from a solution of copper and zinc. Amberlite IR-120, due to the strong sulfonic acid groups, exhibited only a slight preference for copper as compared to zinc. It would seem that a judicious choice of resins coupled with appropriate chemistry …

Rockbursts, Christian Maurice Colson

Masters Theses

"This paper does not pretend to originality; it is an attempt to bring to light the causes and the mechanism of rockbursts, as exposed in the literature. Furthermore, an endeavor has been made to give a comprehensive picture of the prediction, prevention, and control methods of rockbursts. Briefly, what has been done in the field of rockbursts, and what remains open to investigation is submitted to the reader. The choice of rockbursts as a thesis subject appears to be justified by the geologic interest of the question. Detailed geologic observations, and particularly the recording of all the structural features which …

Solid Solution In The Series Sodium Tungsten Bronze, Lithium Tungsten Bronze And Tungstic Oxide, Godrej F. Doctor

Masters Theses

"The tungsten bronzes are a series of anionic substitutional solid solutions of alkali metal metatungstates and tungstic oxide. They are neither alloys nor intermetallic compounds, the term tungsten bronzes was adopted because of their remarkable metallic properties, e.g. luster, specific gravity and especially high electrical conductivity, which resembles to that of graphite. Due to its chemical inactivity and beautiful shades of color, it is used as a coating, especially in the plastic industry and for other ornamental products. The properties and the structure of these bronzes have not been investigated entirely satisfactory; within the last twenty years, only a few …

A Study Of The Efficiency Of Split-Second Delay Electric Blasting Caps In Underground Limestone Mining, John B. H. Fitzwilliam

Masters Theses

"The introduction of electric blasting caps have delay intervals of the order of one-half to one second proved of advantage in many aspects of underground mining, particularly development work. Their use spread, until they now supersede fuse-and-cap firing wherever possible. Split-second delay electric blasting caps are a comparatively recent development from conventional delay caps. They have been found of practicable use in quarrying operations, and have been applied in many phases of underground mining. While evidence, to show that short-delay firing in quarrying is more efficient than instantaneous firing, is becoming increasingly conclusive, it remains to be proved that split-second …

An Ecological Study Of The Foraminifera Of Mason Inlet, North Carolina, Daniel N. Miller Jr.

Masters Theses

"Mason Inlet. North Carolina is a lagoonal marsh area with warm-temperate water, the salinity ranging from fresh to salt water. Nine collecting stations comprise an ecological gradient across the environment.

Forty-two species of foraminifera are recorded from the inlet, ranging in their affinities from brackish water to open-sea facies. Several extensions of range are recorded both northward and southward.

Substratum conditions apparently control the distribution of foraminifera within the inlet. Clean, fine sand provided the largest faunal populations. A depauperate assemblage was found in an inorganic, argillaceous substratum. The largest population of arenaceous forms was found at the channel through …

The Effect Of Pressure Prehydration On The Strength Of Hydraulic Cement Concrete, Thomas Holmes Whitfield Jr.

Masters Theses

"It appears that the rapidity of curing and the degree or ultimate strength of concrete can be influenced by both chemical and physical factors. The main function of the physical factors involved seems to be the creating of a more intimate combination of the cement and water which are the active ingredients. For example, finer grinding of the cement would present more surface area to the water; the application of heat would decrease the amount of surface tension of the water, in addition to speeding the chemical reaction, steam under pressure would force water into the porous particles of cement; …

The Transformation Of The Aluminum-Zinc Eutectoid Alloy At Subcritical Temperatures, Thomas Joseph Burke

Masters Theses

"Interest in the mechanism of the austenite eutectoid transformation in iron-carbon alloys, especially as produced by the isothermal sub-critical techniques introduced by Davenport and Bain, has resulted in the application of similar heat treatment studies to the eutectoid transformations in other alloy systems. The study of the eutectoid transformation is of both fundamental and industrial interest because past experience has shown that these studies yielded much information concerning the nature and mechanism of the changes in eutectoid alloys during the decomposition of the phase stable at high temperatures and has also contributed much toward the development of new properties to …

Geology Of The Crystal Mine, Hardin County, Illinois, John Amsden Emery

Masters Theses

"The study of the geology and mineralization of the Crystal Mine was undertaken at the suggestion of Mr. Dodson G. Gibson of the Crystal Fluorspar Company, who allowed access to the mine and its records for this purpose. The problem was to develop a system of prospecting the so-called bedded-replacement fluorspar deposits of Hardin County, Illinois. It is believed that an economically feasible method has been developed. This method involves not only the actual finding of fluorspar, but also serves as a guide in revealing structural trends suggestive of mineralization.

The fluorspar deposits of the Crystal Mine are representative of …

Efficiency Studies Of The Effect Of Moisture On The Power Consumption Of Mine Scrapers, Georges J. Vigier

Masters Theses

"Many years of practice have resulted in the standardization of several types of scrapers which are now commonly manufactured for use in mining. Although experience has brought out much information on scraping operations, no systematic studies of the efficiency of mine scrapers have been carried out before the experimental works done in the last few years at Missouri School of Mines and Metallurgy. "Purpose of Problem": The purpose of this present study is to consider the effect which moisture in the muck has on the efficiency as regards power consumption and amount of material scraped, of different types of mine …

Intermolecular Potential Functions For Liquid Argon And Liquid Mercury, Richard H. Kerr

Masters Theses

"The purpose of this research is to obtain such intermolecular potential functions for liquid argon and liquid mercury by use of the experimental radial density functions available for these two liquids over a wide range of temperatures. We shall introduce the notion of a correlation between the motions of atoms in neighboring cells in a cell theory of liquid structure, and derive a theoretical radial density function involving the intermolecular potential function for a pair of atoms in the liquid. This radial density function, or as it is frequently termed, the atomic distribution function, applied to the experimental data should …

The Temperature Within A Homogeneous Plate Of Finite Thickness, Charles R. Remington

Masters Theses

"The object of this thesis is to determine by an analytical method the temperature within a homogeneous plate of finite thickness subjected to a constant temperature on one side and a periodic fluctuating temperature, expressible in a Fourier series, on the opposite side. This problem in periodic temperature changes has not, to the author's knowledge, been solved previously. The flow of heat in the problem is considered in only one direction, the x-direction. Flow in the other two directions is considered negligible, or zero. Periodic temperature changes in the earth are of importance. The temperature changes have been used by …

A Study Of Missouri Flint Clay, Edmond Preston Hyatt

Masters Theses

"The problem is one of attempting to explain the peculiar nature of Missouri Flint Clay and to expand the knowledge concerning it. Among the questions for which answers are sought are: What makes Missouri Flint Clay so hard? What happens to Missouri Flint Clay when it is ground? What is the mineralogical constitution of Missouri Flint clay?"--Introduction, The Problem, page 1.

A Determination Of The Surface Tension Of Bismuth, Cadmium, Tin, And Lead, Edward Mckee Chandler

Masters Theses

"Various methods have been employed for the determination of surface tension including capillary rise, drop weight, maximum bubble pressure, sessile drops on flat surfaces, sessile bubbles formed underneath flat surfaces, and the shape of pendent drops. Each method is subject to characteristic advantages and disadvantages. Only two of these will be discussed. The method of maximum bubble pressure allows the formation of a fresh surface for every bubble but does not permit the study of a given sample over a period of time. The sessile drop in direct contrast, allows the observation of the same sample over any period of …

A Grazing Incidence Vacuum Grating Spectrograph For Far Ultra Violet Spectroscopy, Lawrey Huber Chapin

Masters Theses

"Spectroscopy, in the region of the far ultraviolet from 100 Angstroms to 1000 Angstroms, requires special equipment and techniques, inasmuch as these wavelengths are highly absorbed by air. Many gases have resonant frequencies corresponding to the wavelengths mentioned and hence absorption bands appear in the spectrograms obtained by using spectrographs for the visible region. One solution of the problem of obtaining data in this region is to construct a spectrograph from which all intervening gas molecules have been removed, thus eliminating the absorbing material. A vacuum of 10⁻⁴ mm. of mercury is necessary to reduce the absorption to a value …

The Reflection Coefficient At The Truncated Corner Of A Rectangular Wave Guide, John Raymond Barcroft

Masters Theses

"The term wave guide refers to a hollow conducting tube (usually of rectangular or circular cross section) filled with a dielectric (or vacuum) and used for the transmission of electromagnetic waves. We shall consider the guide to be bounded by a perfect conductor and to be filled with a lossless homogeneous isotropic dielectric (or vacuum). The electromagnetic wave in the guide must of course satisfy Maxwell's equation. It must also satisfy the boundary condition that there be no tangential component of electric field at the surface of the conductor. If the electromagnetic waves traveling along the guide meet a discontinuity …

Separation Of Cobalt From Zinc Sulfate Solutions By Synthetic Cation Exchange Resins, Wen-Hsiang Chang

Masters Theses

"The purpose of the present research is primarily to investigate the possibility of the separation and recovery of cobalt from zinc sulfate solutions by means of cation exchange resins. It is thought that such an investigation, seemingly of academic interest, might throw some light on determining the possibility of processing some industrial solutions containing both cobalt and zinc. Cobalt, for instance, has been well known as one of the most detrimental impurities in zinc electrolytic solutions. In spite of various purification treatments, small amounts of cobalt are often present in the electrolytic solution, causing a reduction in current efficiency and …

The Development Of Plans For A National Airport For Ankara, Turkey, Mehmet Ragip Samli

Masters Theses

"'The present rapid development of general interest in aviation has brought to the front a new field of engineering. Development of the airplane has already reached a stage where the limit of its usefulness seems fixed only by the places which may be provided for taking off and landing. Due to the newness of the problem, not every one on whom responsibility rests recognizes the fact that the selection of the proper site and location for an airport is just as much an engineering problem as are its design and construction.'

The Turkish government began construction or the Ankara-Esenboga airport …

A High-Temperature X-Ray Diffraction Camera And Its Application To Copper And Titanium, Robert R. Penman

Masters Theses

"The purpose of this research was threefold, and consists of the following sections: 1. Effective use of a high temperature x-ray camera, capable of reaching temperatures of 1000 ºC. 2. Investigation of the thermal dilation of certain cubic metals. 3. Accurate determination of the lattice constant (aₒ) of Beta Titanium at 900 ºC "--Introduction, page 1.

Examination Of The Underlying Trends In Village And Rural Recreation With Application In The Three Oaks School District, Alfred Pfliger

Masters Theses

No abstract provided.

Reduction Of Zinc Sulphide In A Vacuum, Tien-Shih Liu

Masters Theses

"The successful large scale commercial application of high vacuum for high temperature metallurgical operations is a comparatively new development. The use of Pidgeon and the carbothermic processes for the production of magnesium during the war forced a perfection of both equipments and techniques for high vacuum operations. This opens broadly the way for a great expansion of vacuum metallurgy. Vacuum operation is thus no more a laboratory method - it is a kind of industrial practice. Many metallurgical operations, which cannot be carried out by ordinary processes, are made feasible when conducted in a reduced pressure. typical examples are the …

Barium-Tin Alloys, James Richard Whanger

Masters Theses

"The author attempted to produce alloys of barium and tin using metallic barium and barium hydride. Also, an attempt was made to study the phase diagram using thermal analysis and X-ray investigation"--Introduction, page 2

The Effect Of Silicate Ion And Hydroxyl Ion On The Abstraction Of Potassium Ethyl Xanthate By Galena, Pao-Zung Wu

Masters Theses

"The purpose of this research was to investigate the effect of the silicate ion and the hydroxyl ion on the removal of potassium ethyl xanthate by galena; since the former ion is encountered during flotation owing to dissolution of silicates, and also sodium silicate being often used to disperse gangue minerals, and the latter one is encountered during floating in an alkaline circuit"--Introduction, page 1.

Plateau Characteristics Of Geiger Counters With Respect To Different Gas Mixtures And Pressures, Ralph E. Lee

Masters Theses

"The section of a Geiger Counter is characterized by the so-called plateau curve. In this curve the counting rate of a given counter is plotted as a function of voltage, when the gas which it contains and the radiation to which it is exposed are both kept the same. These curves are characterized by a rapid rise beyond the starting potential (potential at which the counter begins to respond) until a more or less flat region is reached. This flat region is called the plateau of the curve. The slope and width of the plateau curve are dependent upon the …