Digital Commons Network^™

Permeability Of Poly (Ethylene Terephthalate), James G. Harvey

Masters Theses

"Corrosion is a phenomenon which has been the subject of extensive research, in order to find a way to control or completely stop it. Two general methods, either placing the material which corrodes in an anti-corrosive atmosphere or protecting the material which corrodes from the corrosive atmosphere, are the chief means of preventing corrosion today.

The second method is probably most widely used presently. One of the most important methods of protection is by means of organic protective coatings, or paints, but at best these only retard corrosion, due to the fact that corrosive media e.g. water vapor, ions etc. …

A Theoretical Study Of The Mechanism For The Haeffner Effect, David Charles Jacobs

Masters Theses

"In 1953, E. Haeffner reported that when he had passed a direct electric current through a length of capillary filled with liquid mercury, the lighter mercury isotopes were enriched at the positive terminal and the heavier mercury isotopes were enriched at the negative terminal. This phenomenon is referred to as the Haeffner Effect. Since Haeffner’s original experiment, other investigators have obtained similar results in other liquid metal systems.

When a direct electric current passes through a metallic conductor a free energy gradient is established. The direction of the negative free energy gradient is in the direction of the positive terminal. …

A Study Of Heat Transfer Coefficients On Cylindrical Pipe In Turbulent Flow, Dennie Lee Adkins

Masters Theses

"This thesis represents a study of the effects of turbulent motion on heat transfer coefficients on cylindrical pipe.

The turbulent motion was created by cutting transverse slots in a spiral configuration along the pipe length.

An induction heater was used for the heat source and water as the cooling medium. The water was conducted over the pipe surface and through the slots.

This caused the laminar layer along the pipe surface to be broken up and an increase in the heat transfer coefficient was experienced.

The main objective of this test was to find if a relation existed between the …

Sage Of Bluffdale: John Russell, Editor And Writer, Helen E. Sanders

Masters Theses

No abstract provided.

An Analysis Of The Financial Structure Of The Eastern Illinois University Union, Howard L. Unterbrink

Masters Theses

No abstract provided.

Developing In-Service Training In Guidance, Melba A. Huning

Masters Theses

No abstract provided.

A Study Of Characteristics And Achievement Of Transfer Students Admitted To Eastern Illinois University, David A. Diederich

Masters Theses

No abstract provided.

Proposed Procedures In The Development And Initiation Of An Elementary School Guidance Program, Andrew J. Cain

Masters Theses

No abstract provided.

A Study Of The Effectiveness Of Listening Instruction In Grades Five And Six, Terry R. Shepherd

Masters Theses

No abstract provided.

Considerations For The Implementation Of A Team Teaching Program In General Business, Joseph Daughhetee

Masters Theses

No abstract provided.

Transpiration Cooling Of A Heat Generating Porous Plate, M. K. A. Hameed

Masters Theses

"This investigation is a continuation of a thesis by T. S. Purewal. Several of the simplifying assumptions made by the above author are either ignored or the justifiability of such assumptions is probed into in order to obtain a more rigorous solution. Effects of the assorted grain size, non-Newtonian cooling, direction of coolant flow, thickness of the porous heat generating plate, specific heat of the coolant, and compressibility of the coolant are investigated in this thesis. Variation of maximum temperature of both coolant and the solid material for different types of heat source distribution are also studied.

As the grain …

The Removal Of Sub-Structure From Alpha Uranium, Albert E. Bolon

Masters Theses

"The possibility of obtaining larger, perfect single crystals of alpha uranium by a modified strain-anneal method has been investigated. A -196°C tensile deformation was performed on pseudo single crystal rods which had been prepared by the phase transformation method. The specimens were subsequently annealed at 650°C.

It was found that by utilizing pseudo single crystals with a prescribed crystallographic orientation with respect to the tensile axis that recrystallized crystals of comparable size and perfection to those prepared by the grain coarsening method could be produced. Grain coarsening is the presently accepted process for preparing perfect single crystals of alpha uranium. …

A Survey Of The Methods Of Gas Analysis, Yadvendra V. Desai

Masters Theses

"The object of this thesis is to survey the different types of gas analyses. Subject concentration will be centered on the general and specific instrumental methods of gas analysis. A general account of continuous automatic gas analyzers will be included. References are included for the use of those who desire a more comprehensive knowledge of a specific method of gas analysis.

During recent years, the importance of gas analysis has been considerably increased with the advancement of science and technology. Gas analysis mainly involves the identification, quantitative evaluation and separation of the components of a gaseous mixture. Thus it includes …

Preliminary Investigation Of The Effects Of Seeding Fusion Cast Refractories, Thomas Spencer Montgomery

Masters Theses

"The crystallization process in a zirconia-alumina- silica melt of high viscosity was studied, A system was used of the same composition found in commercial electrocast glass tank refractories. Artificial nucleation was tried in an attempt to control the process of crystallization; the method involved the addition of suitable "seeding" material.

It was found that introduction of nucleation agents consisting of the major component oxides of the system had noted effect upon the course of crystallization. Preferred orientation normally found in unseeded electrocast refractories was diminished with the addition of zirconia grains and amplified with particles of tabular alumina.

Results obtained …

A Study Of The Electro-Chemical Injection Of Ca(Oh)₂ Into Pure Kaolin Clay, Sam Michael Savas Jr.

Masters Theses

"The work presented in this thesis is the investigation and study of a possible and successful means of injecting an electrolyte solution into a fine grain soil mass with the use of electric current and to measure some of the changes of its physical properties. A NoKarb Georgia Kaolin Clay was treated by passing a preferential electrolyte solution of Ca(OH)₂ using direct current for a period of one and six days. The tests performed during this investigation included the following: (a) tri-axial tests, (b) atterberg limits, (c) pH determination, (d) moisture content change (from treatment), (e) visual settling of treated …

The Influence Of Bench Geometry On Blasting Effects For Vertical Cylindrical Charges, Thomas E. Pearse

Masters Theses

"Blasting phenomena are affected by many factors. Previous investigators have studied many of these factors, however, the influence of charge length and explosive detonation velocity have apparently not been thoroughly examined.

It was found by this investigation that the detonation pressure of a commercial explosive is closely controlled by the detonation velocity. The detonation velocity, in turn, will largely determine the necessary blast geometry that can be successfully employed. Relationships were derived between the detonation velocity, in relation to the rock energy propagation velocity, and blast geometry for both bottom and collar primed blasts.

The resultant force magnitude and direction …

A Study Of The Problems Of Design Of Optimum Vibration Absorbers For Multi-Mass Systems, James C. Villegas

Masters Theses

"The purpose of this investigation was to continue the preliminary work of Burrows on the application of tuned and damped vibration absorbers to the reduction of vibratory stresses in a multi-mass torsional vibration system. A hypothetical engine system was chosen for both investigations because it had many complicating factors and gave an eminently practical subject for study.

Attention was centered on the reduction of stresses resulting at higher speeds of the machine system and on developing methods and criteria for the designing of effective absorbers where several modes of vibration exist in the operating speed range of the machine"--Abstract, page …

Geology Of The Esterbrook Area, Converse And Albany Counties, Wyoming, Michael Nolan Greeley

Masters Theses

"The Esterbrook area lies within the Laramie Range in Converse and Albany Counties, Wyoming. Exposures include Precambrian metamorphic and igneous rocks, the Tertiary White River formation, and Quaternary alluvium.

Hornblende schist and mica-quartz schist comprise the Precambrian metamorphic rocks. Foliation planes of these rocks trend northeast and dip steeply to the southeast. Metamorphic rocks of younger age probably lie to the southeast.

A distinctive, Precambrian silicic pluton of biotite-leucogranite with marginal zones of muscovite-leucogranite and alaskite passively intrudes the metamorphic rocks, generally parallel to the foliation trends. Numerous granite pegmatites show a zonal distribution around the pluton and appear to …

A Determination Of Vapor Pressure Of Barium In The Thermal Production Of Barium Metal, Thomas A. Theobald

Masters Theses

The Knudsen effusion method was used to find the equilibrium reaction pressure of barium for the following reactions:
4BaO + 2Al - 3Ba + BaO·Al₂O₃ (l)
4BaO + Si - 2Ba + 2BaO·SiO₂ (2).
The resulting barium pressure for reaction (l) ranged from 0.27 mm. Hg to 1.77 mm. Hg in a temperature range of 940°C to 1086°C. The barium pressures for reaction (2) varied from 0.38 mm. Hg to 1.94 mm. Hg in a temperature range of 1000°C to 1086°C. The free energies of formation of BaO·Al₂O₃ and 2BaO·SiO₂ at 1087°C …

A Comparison Of A-C And D-C Lead Compensation From D-C Prototype Networks, Piyush Parikh

Masters Theses

"The object of this thesis is to study the difference in transient and frequency response characteristics between a prototype d-c phase lead compensating network and an equivalent a-c phase lead compensating network.

A second order servo is selected to be compensated and five d-c prototype and equivalent a-c phase lead compensating networks are designed. The frequency characteristics of the a-c networks are obtained experimentally and these of the d-c networks are obtained analytically. The characteristics of both networks are compared and their differences are studied. The transient characteristics of the d-c and a-c compensated closed-loop systems to a step input …

A Model Study Of The Behavior Of Elastic Liners In Shallow Underground Openings, Martin Samuel Oudenhoven

Masters Theses

"Models of epoxy resin were used in a stress freezing technique to determine areas of possible failure in lined circular openings. These models were loaded in a centrifuge for a fixed period of time, after which they were analyzed photoelastically. The material characteristic changes, with time, were recorded on graphs and used in the analysis.

Two types of tests were conducted; one, where the lining thickness was changed and, the other, where materials of the liner and plate material were changed.

The resulting analyses furnished proof that the greater the rigidity of the lining, the higher the stress developed in …

A Model Study Of The Application Of Roof Bolts Under Unsymmetrical Loading Conditions, Friedrich H. K. Esser

Masters Theses

"When coal is extracted by the long wall mining method, two gate-roads on either side of the working face are driven with the advancing operation. In the surroundings of these openings the state of stress which existed prior to mining is not only disturbed by the drifting process of the gate-roads but also by the coal extraction in the long wall, resulting in an "unsymmetrical" stress distribution. Varying incremental pressure components and the high complexity of strata movements make it extremely difficult to control the rock behavior under unsymmetrical conditions by conventional support. Application of roof bolts as an auxiliary …

A Survey Of Merit Rating In Industry, N. K. Nahavandi

Masters Theses

Introduction

Personnel administration is but one phase of industrial management. It has been defined as:

"Personnel administration means organizing and treating people at work so that their effort. singly and collectively, will bring the best results possible. This requires quite specific information about the employee and his job. It implies knowing what the employee is doing, and how and why it differs from what is wanted of him. It implies having some idea of the employees' capacity in relation to the responsibilities of his present assignment. It implies having a measure of the employers' contribution to the organization, and understanding …

Studies Involving Modification Of The Megregian Method Of Fluoride Determination And Application To Fluoride Balance Studies In Infants, Gene R. Wright

Masters Theses

Introduction

At the request of Dr. Frederick Margolis, M.D., and in association with The Upjohn Company, this research problem was initiated as a participation in the investigation of whether or not fluoride ingested as a constituent of the Upjohn 47-M liquid vitamin preparation is retained in an infant's body to the same extent as is fluoride ingested as the sodium salt by itself--either in solution or in tablet form. The retention patterns may be studied indirectly by measuring the amounts of fluoride excreted in the urine and in the feces during each of a series of equal time intervals after …

Ground Water Investigation In The Southern Half Of Franklin County, Missouri, Kemal Piskin

Masters Theses

"Increasing population and industrialization in Franklin County, Missouri, has led to increased demand for water. Much of this demand will be satisfied from ground water resources. Although the general geology of Franklin County has been mentioned in several publications, no detailed study of structure and ground water geology had been done. This thesis consists of study of stratigraphy, lithology, and geologic structure, and analysis of well log data to determine occurrence and availability of ground water, in the southern half of Franklin County.

Stratigraphy and lithology is compiled from previous literature, modified to agree with well log data. Structural geology …

A Study Comparing Two Isometric Contraction Training Methods For Increasing Strength, William Ray Bockwitz

Masters Theses

No abstract provided.

The Effect Of Resistive Exercises Upon The Velocity Of A Thrown Baseball, Donald Allan Rasmussen

Masters Theses

No abstract provided.

A History Of Intercollegiate Baseball At Eastern Illinois University From 1904 To 1962, Ronald Francis Kirby

Masters Theses

No abstract provided by author.

A Study Of Segregation In Cast Aluminum-Uranium Alloys, B. L. Bramfitt

Masters Theses

"This investigation involves a photomicrographic study of the segregation resulting from the eutectic solidification characteristics of aluminum-uranium alloys, ranging from 5 to 30 weight percent uranium. The segregation can occur in either of two manners; the first, due to the gravitational forces acting upon the growing particles which nucleate in the melt and the second, due to the mode and rate of heat transfer through the material. It was found that segregation occurred only as the result of the latter factor due to the small volume of the ingot and the rapid rate of heat transfer. The segregation was measured …

A Preliminary Study Of The Effect Of Heat Treatment On The Strength And Microstructure Of A Glass-Ceramic Material, P. D. Ownby

Masters Theses

"The strength and microstructure of a glass-ceramic material of the composition 53 percent SiO₂, 19 percent Al₂O₃, 15 percent MgO, and 13 percent Li₂O were studied. Cylindrical specimens of glass were formed and heat-treated to six different temperature levels for various time periods. The method of strength testing used was a diametral compression loading technique. It was found that the strength of this material increased initially with heat-treatment but then decreased. The strength characteristics of the completely crystallized glass ceramic material were found to be dependent on the initial nucleation period. Some factors which influenced anomalous crystal growth are described. …