Digital Commons Network^™

Compensator Design For Unity Feedback Systems Using An Analytical Method, Chang-Yu Wu

Masters Theses

“In control systems engineering it is frequently necessary to compensate a fixed plant whose transfer function cannot be changed. Usually the characteristics of the resulting system are established in terms of steady-state and transient performance specifications. Generally it is necessary to insert a compensator which insures stability as well as satisfies the specifications.

In this thesis an analytical method is developed to determine the transfer function of the compensator in order to satisfy the following set of specifications. The fixed system is assumed to contain one non-linearity, saturation. The input to the saturable device is constrained in a statistical …

Zirconium Chloride Nuclear Battery, Lonnie J. Shalton

Masters Theses

"An investigation of the neutron absorption characteristics of zirconium chloride was made to verify the reports of Chicago Development Corporation (5810 47th Ave., Riverdale, Md.) that ZrCl Blight be used as a power source for a nuclear battery. The company detected what they believed to be a beta current when the ZrCl was bombarded with neutrons from a slightly enriched uranium source. Investigation using higher powered neutron sources revealed that such a current was highly improbable and the company incorrectly interpeted the phenomena. Reports in the literature also confirmed that an electric current from the ZrCl using a low powered …

The Characteristics Of Radial Strain Propagation Induced By Explosive Impact In Jefferson City Dolomite., Choon K. Quan

Masters Theses

"Blasting effects depend largely on peak radial strains propagated in rock media by explosive impact. To improve blasting design and control of secondary effects (e.g., structural fatigue), an equation for peak radial strain propagation induced by explosions was developed as follows: Emax = K e^-αr /r

An instrumental technique was designed to test the validity of the equation in the Jefferson City dolomite. Results showed ii that for 1-lb charges of 60% ammonia-gelatin explosive, peak strains, at any distance r, were reduced in amplitude in accordance with an exponential decay function of the type Emax = 281 e^{-0.026r …}

Investigations Of The Feasibility Of Transporting Ore In Open-Flumes., Kirtikant R. Sheth

Masters Theses

"Considerable effort has been expended and many data are published on developing the technologies of pipeline transportation and hydraulic hoisting. However, comparatively little information is available on the techniques of hydraulic mining, and nearly none ii is reported on conveying slurries in open flumes. For this reason, the author chose to investigate some of the parameters that influence open-flume transport.

It was found that Durand has assembled the findings of several investigators into a simple mathematical expression which is accepted as a standard for designing slurry pipelines. ·Further investigation by the writer revealed that Durand's formula, with only minor modification, …

The Design, Construction, And Evaluation Of A Vortex Stabilized Plasma Generator, Ronald Ray Williams

Masters Theses

“This report presents the design, construction, and evaluation of a vortex stabilized arc plasma generation facility operating on argon.

The facility consisted of five basic systems; the plasma genera- tor, the electrical power system, the argon flow system, the cooling system, and instrumentation.

The facility was designed to meet four general requirements; stable arc operation, low electrode deterioration, low cost of construction, and provisions for determination of the operating characteristics and thermal properties of the plasma.

Experimental results obtained in the laboratory agreed well with the design conditions. The rate of energy dissipated in the electric arc varied from 7. …

The Effect Of An Induction Field On Transducers., Ratilal S. Patel

Masters Theses

"This report presents the results of an experimental investigation on the effect of an induction field on transducer output. Various types of transducers; strain gages, thermocouples, and thermistors, were used. The changes in the output of these transducers were measured for various induction field conditions.

Measurements must often be made where strong electrical fields are present. Strain gages are used to measure the stresses in electrical machinery. Thermocouples and thermistors used for measuring the temperature of materials undergoing heat treatment with an induction heater are also subjected to an induction field.

The general experimental procedure was the same throughout the …

Construction And Test Of Equipment For Use In Ultrasonic Pulse Echo Studies., Charles Joseph Reinheimer

Masters Theses

"An ultrasonic pulse generator was constructed with a variable pulse width ranging from 4 microseconds to 10 milliseconds and a repetition period varying from 15 milliseconds to 5 seconds. The oscillator had an almost continuous range from 500 kilocycles to 18 megacycles per second.

Its applicability in studies of internal friction of metals was demonstrated with a single crystal aluminum sample"-- Abstract, p. vi

Anodic Dissolution And Disintegration Of Indium, Thallium, And Indium-Cadmium Solid Solutions And Valency Of The Ions Going Into Solution., Richard Lloyd Martin

Masters Theses

"Indium was found to form only In⁺³ ions when dissolving anodically in aqueous acid solutions. Thallium dissolves anodically in acid solutions giving Tl⁺¹ ions only. The reason why Faraday's law is not being formed is that the anode undergoes partial disintegration producing small metallic particles.

Disintegration of these anodes depends on several factors: the nature and concentration of the corrosive medium, the surface condition of the anode, the current density, and the temperature of the corrosive solution. Disintegration may be due to different mechanisms depending on the nature of the electrolyte" -- Abstract, p. ii

The Toxic Effects And Fate Of Selected Pesticides In Natural Water., Donald Lee Evans

Masters Theses

"The extensive application of synthetic organic pesticides in the United States has created many problems, particularly with respect to fish life. While a number of investigations have been undertaken to determine the toxicity of several pesticides to various species of fish, a great deal of research work is needed before the problem is completely understood.

The individual toxicities of DDT, BHC, 2.,4-D, and Sevin to western golden shiners were determined by means of the bioassay procedure at a t empera t ure Of 16oc. The four chemicals studied were found to be toxic to the test fish with Median Tolerance …

Estimating Bench Design Parameters For Open-Cut Excavation, Rajni K. Gandhi

Masters Theses

"There are no direct relationships available that provide a basis for bench design of multiple-bench, open-cut earth excavations in competent materials when power shovels are employed. This study was undertaken to determine if mathematical design expressions could be developed when the production rate, material's properties, and equipment operating characteristics were known.

It was found that all bench dimensions were a function of the bench height, which in turn was controlled by the required rate of production. The investigation revealed that suitable relationships could be developed to guide in the control of bank stability, choice of shovel capacity, determination of the …

Effect Of Poly-Ethylene Glycol, A Non-Shrinking Agent, On Strength Properties Of Concrete., Vasantrai Vallabhbhai Desai

Masters Theses

"This thesis describes laboratory test made on plain concrete cylinders and ~earns for compressive strength, flexural strength, durability and shrinkage, using poly-ethylene glycol (ElOOO) as a non-shrinking admixture. The tests were conducted in the Materials Laboratory of the Civil Engineering Department.

The test results show that poly-ethylene glycol has the effect of reducing the compressive and flexural strength of plain concrete. The admixture also has the effect of reducing shrinkage, and reversing it, causing expansion with large percentage of its use. For the number of cycles of alternate freezing and thawing reported the admixture did not have any effect on …

Artifact Filter., Kent William Swearingen

Masters Theses

"Peripheral blood pulse monitors are highly susceptible to noise-artifact-- in their present stage of development. The purpose of this thesis is to demonstrate a feasible means for filtering the artifact, using existing monitors. Since no peripheral pulse monitor (transducer) was available for experimentation, a simulated test input was devised with frequency variations from JO cycles/minute to 1.50 cycles/minute.

The filtering circuit predicts the time location of each input pulse. The location of the prediction is governed by the accuracy of the preceding prediction. This is controlled by an R-C timing circuit with a Schmitt Trigger and relay.

From the data …

The Effect Of Matrix Condition In The Solution Of A System Of Linear Algebraic Equations., Herbert R. Alcorn

Masters Theses

"The solution of a system of linear non-homogeneous equations may contain errors which originate from many sources. A system of linear equations in which small changes in the coefficients cause large changes in the solution is unstable and the coefficient matrix is ill- conditioned .

The purpose of this study is to define several measures of matrix condition and to test them by correlation with a measure of the actual errors introduced into a system of equations.

The study indicates that three of the five measures of condition tested were reliable indices of the magnitude of error to expect in …

A Study On Estimating Parameters Restricted By Linear Inequalities, William Lawrence May

Masters Theses

“A comparison of two methods for estimating parameters restricted by linear inequalities in linear statistical models was made.

The first method consisted of finding the least squares estimates of the parameters disregarding the restrictions, and then forcing those parameters that were outside of their allowable ranges to the nearest endpoints of those ranges.

The second method made use of quadratic programming to minimize the same sum of squares that the first method minimized while keeping the parameters inside or at the endpoints of their allowable ranges.

The quadratic programming gave better estimates of the parameters in the sense that the …

Study Of Mass Transfer In Oscillating Droplets., Subhash Vishnu Gangal

Masters Theses

"The object of this investigation was to study the resistance to mass transfer inside single oscillating liquid droplets falling in a liquid medium. The following four systems were studied: (1) 3% acetic acid in nitrobenzene and water, (2) 25% acetic acid in nitrobenzene and water, (3) 3% acetic acid in nitrobenzene and glycerin in water, and (4) benzyl alcohol and water. The individual mass transfer coefficients were computed by using the Handlos and Baron relation and were compared with the experimentally determined dispersed phase mass transfer coefficients. The average absolute deviation of the observed values of dispersed phase mass transferred …

Longitudinal Spin Relaxation Of Optically Excited Rubidium., John Robert Martin

Masters Theses

"This thesis is intended to be a guide to the theory and experimental procedures of optical pumping in one of its most usual applications. It is also intended to be an extension of the work done here by Steinbruegge¹ in 1963 along with several significant changes and improvements in experimental techniques. A study is made of the optical pumping of rubidium vapor, and results are given stating the most efficient methods with which to produce large populations of optically oriented rubidium atoms, and thereby determine the relaxation properties of a given rubidium system"-- Abstract, p. ii

Densification Studies Of Three-Component Refractory Grog Systems., Jerome Dale Patterson

Masters Theses

"The bulk density and crushing strength properties of three-component refractory grog systems that were formed by mechanical impact or by mechanical vibration were determined.

Aqueous alkali silicate solutions of various types, concentrations, and amounts were investigated as room temperature binders for these grog systems. Compositions having maximum bulk densities were determined for each of six different three-component refractory grog systems. The densification rate curves for systems formed by mechanical impact were determined"--Abstract, p. ii

Transverse Spin Relaxation Of Optically Pumped Rubidium., Robert Evans Hufft

Masters Theses

The study of the transverse spin relaxation of rubidium vapor is a continuation of the work done by Kenneth Steinbruegge¹ and that in progress by John Martin² at the University of Missouri at Rolla. The purpose of the experiment is to study the change of intensity of the transmitted pumping light at resonance in the longitudinal direction, and the observation of the high frequency modulation of a second "cross" beam of light perpendicular to the first. Under resonant conditions this "cross" beam will exhibit a phase coherence and a loss of phase coherence when parameters of the experiment …

Investigation Of The Effect Of The Wall Thickness On The Residual Stresses Developed In Thick Wall Cylinders Due To Water Quenching From The Outside Surface., Ghanshyam Chandubhai Patel

Masters Theses

"This investigation has been made to determine the residual stresses in thick wall cylinders by the use of strain gages.

The cylinders were quenched from their outer surface i n water from a temperature of 1000°F, and the resulting residual stresses were determined by Sachs boring-out method. The effect of the wall thickness of the cylinders on the residual stresses and the error developed due to the boring operation were discussed"--Abstract, p. ii

A Study Of The Separation Of A Mixture Of Carbon Dioxide And Hydrogen By Means Of An Orifice., Larry Gene Bauer

Masters Theses

"The purpose of the investigation was an attempt to verify a statement made by Partridge in an effort to discover a new method of separating gaseous mixtures. Partridge stated that when a constant pressure is applied on two gases of different specific gravity, a larger volume of the l igl1ter gas is forced through the orifice. Orifices of 1.016, 0.319, and 0.222 millimeter in diameter were used in the course of the investigation.

It was found that with the apparatus used in the research endeavor, no separation of the mixture of hydrogen and carbon dioxide could be obtained"--Abstract, p. i

Influence Of Quartz Particle Size And Concentration On The Fracture Stresses Of Triaxial Alumina Porcelain., John David Weyand

Masters Theses

"Quartz particles were introduced into a typical triaxial alumina porcelain. Three levels of particle size and three levels of concentration were studied. The strength sample sizes were large. A diametral- compression loading method was used for strength testing. It was found that the porcelain strength decreased with increasing grain size and concentration of quartz particles. A linear relationship existed between log quartz concentration and mean fracture stress"--Abstract, p. ii

The Effect Of The Static Compaction On The Mechanical And Physical Properties Of Asphalt Concrete Hot-Mixes, Abdel-Gawad A. Bahgat

Masters Theses

"The objective of this investigation was to study the effect of the static compaction effort upon the physical and mechanical properties of asphalt concrete hot mixes. To study the effect of the static compaction upon the physical properties of the asphalt mixes, six mixes were prepared using hard, well graded crushed limestone as an aggregate, blended with an 85-100 penetration grade asphalt cement. The control mix was prepared and tested in accordance with the Marshall method for mix design. The other five mixes were prepared and tested using the same procedures of Marshall except for compaction, where five different static …

The Dielectric Properties Of Thallium Nitrate., Gene E. Gowins

Masters Theses

"The purpose of this research was to investigate the dielectric behavior of thallous nitrate and to determine whether it belongs to space group Pbnm or to Pbn2.

The growing of single crystals of thallous nitrate which are suitable for dielectric measurements is difficult because the crystals are prone to initiate a dendritic growth habit. In the present work single crystals of thallous nitrate were obtained, however, by slow evaporation of an aqueous solution at 55 degrees centigrade. The crystals were plates, not larger than 8 x 8 x 2 mm, whose principal faces were subsequently indentifled as (001) planes. The …

A Method To Give The Best Linear Combination Of Order Statistics To Estimate The Mean Of Any Symmetric Population, Robert M. Smith

Masters Theses

“This paper gives a distribution for the ratio of two non-independent normally distributed random variables. The random variables involved are jointly distributed as the bivariate normal with means zero and variance- covariance matrix V.

The sample mean and one-half the sum of the smallest and largest sample observations from the symmetrically truncated Cauchy density function are compared as estimates of the mean of this density function. The reason for this comparison is to determine which of these two estimators gives the best estimate of the mean.

A method to empirically determine the best linear combination of order statistics for any …

A Study Of The Stabilization Of Putnam Silt Loam With Large Organic Cations, George C. Bennett Jr.

Masters Theses

"Laboratory tests were conducted to determine if Aliquat, a quaternary ammonium chloride compound, could be used to change the physical properties of Putnam silt loam. The effects of adding varying amounts of Aliquat to the soil were measured in terms of the results of Atterberg limits tests, the moisture-density relationship, unconfined and triaxial compressive strength, and capillary adsorption characteristics. A small change in the Atterberg limits, the optimum moisture content, and the maximum dry density was noted. An increase in the unconfined compressive strength and a reduction in the moisture adsorption potential was accomplished by the addition of 0.25 and …

The Effect Of Surface Roughness, Cure Pressure, And Temperature Level On The Thermal Resistance Of Bonds And Contacts, David Leo Schwaller

Masters Theses

"This investigation was conducted to determine the thermal effect of temperature level, surface roughness, and curing pressure on bars and bonded interfaces.

The equipment used in this investigation is shown in Fig. 1 and Fig. 2. The four specimens used, cylindrical aluminum alloy bars, were cut radially at their midpoints and faced on a lathe. Heat was supplied by an electrical resistance heating element and an ice bath was used to conduct heat from the alloy specimen. A heat shield was used to insure one dimensional heat flow. Spacers were placed in the insulation at the top, the interface, and …

Determination Of The Fast Flux Of U.M.R. Reactor, Dave Vibhakar Ratilal

Masters Theses

"Measurements of fast flux of University of Missouri at Rolla, Reactor have been made using: (n,p) reactions in Mg²⁷ and Ni⁵⁸ and (n,α) reactions in Al²⁷. The effective activation cross sections at respective threshold energies for various foils have been obtained from AERE and AECL reports and from literature published by various investigators. A RIDL 400 channel analyzer was used for counting"--Abstract, page 1.

A Study Of Stability Of Numerical Solution For Parabolic Partial Differential Equations., Tsang-Chi Huang

Masters Theses

"Parabolic partial differential equations hold a very important position in science and technology since they are encountered frequently in the solution of diffusion and heat-conduction problems. Theoretically, it is possible to solve many of these equations by analytical methods, but the modern development of mathematics has revealed that there are numerous difficulties in obtaining the solution. Numerical solutions for most applied problems of a parabolic partial differential equation type are practically necessary, thus methods for numerical solution or approximate solution became more important. Since numerical results are required for most applied problems of a parabolic partial differential equation type a …

The Effect Of Plastic Deformations On Grain Boundaries., Jayendra Jamnadas Shah

Masters Theses

"The purpose of this study is to determine the effect of the plastic deformations on the grain boundaries and the grain structure of mild steel. Five beams tested were of A-36 steel and of 6 WF 20 rolled section. Central loading was used to develop a plastic tinge at the cent1:1r.

At the center, where a plastic hinge was formed, the effect of the plastic deformations on the grain structure was severe in all the samples taken from the tension side of all plastically or partially plastically loaded beams. In fully plastically loaded beams this effect had spread on both …

A Study Of The Crystallographic Orientation Dependence Of Electrical Resistivity In Zinc, Paul Frederic Becher

Masters Theses

"A potentiometer and galvanometer setup was used to obtain electrical resistivity data for polycrystalline zinc. Cold working textures were investigated by the reflection technique with a quadrant x-ray spectrometer.

Resistivity data were obtained for specimens that were reduced up to forty per cent from the as received condition, and the corresponding textures were studied. The results indicated that the resistivity change in the rolling direction is due to the reorientation of the c-axis in the rolling caused by cold working"--Abstract, page ii.