Digital Commons Network^™

Rockbursts, Christian Maurice Colson

Masters Theses

"This paper does not pretend to originality; it is an attempt to bring to light the causes and the mechanism of rockbursts, as exposed in the literature. Furthermore, an endeavor has been made to give a comprehensive picture of the prediction, prevention, and control methods of rockbursts. Briefly, what has been done in the field of rockbursts, and what remains open to investigation is submitted to the reader. The choice of rockbursts as a thesis subject appears to be justified by the geologic interest of the question. Detailed geologic observations, and particularly the recording of all the structural features which …

The Reflection Coefficient At The Truncated Corner Of A Rectangular Wave Guide, John Raymond Barcroft

Masters Theses

"The term wave guide refers to a hollow conducting tube (usually of rectangular or circular cross section) filled with a dielectric (or vacuum) and used for the transmission of electromagnetic waves. We shall consider the guide to be bounded by a perfect conductor and to be filled with a lossless homogeneous isotropic dielectric (or vacuum). The electromagnetic wave in the guide must of course satisfy Maxwell's equation. It must also satisfy the boundary condition that there be no tangential component of electric field at the surface of the conductor. If the electromagnetic waves traveling along the guide meet a discontinuity …

Solid Solution In The Series Sodium Tungsten Bronze, Lithium Tungsten Bronze And Tungstic Oxide, Godrej F. Doctor

Masters Theses

"The tungsten bronzes are a series of anionic substitutional solid solutions of alkali metal metatungstates and tungstic oxide. They are neither alloys nor intermetallic compounds, the term tungsten bronzes was adopted because of their remarkable metallic properties, e.g. luster, specific gravity and especially high electrical conductivity, which resembles to that of graphite. Due to its chemical inactivity and beautiful shades of color, it is used as a coating, especially in the plastic industry and for other ornamental products. The properties and the structure of these bronzes have not been investigated entirely satisfactory; within the last twenty years, only a few …

A High-Temperature X-Ray Diffraction Camera And Its Application To Copper And Titanium, Robert R. Penman

Masters Theses

"The purpose of this research was threefold, and consists of the following sections: 1. Effective use of a high temperature x-ray camera, capable of reaching temperatures of 1000 ºC. 2. Investigation of the thermal dilation of certain cubic metals. 3. Accurate determination of the lattice constant (aₒ) of Beta Titanium at 900 ºC "--Introduction, page 1.

A Comprehensive Traffic Survey Of Phelps County, Missouri, Clifford D. Muir

Masters Theses

"The purpose of this study is two fold. The first of these purposes is to serve as a pattern or guide for any county or township wishing to conduct a comprehensive traffic survey. The second purpose of this study is to provide traffic classification and other data on a typical county system of rural roads. Today, many counties in the United States are faced with the problem of inadequate roads, due to the modernization of the American farm. While they realize this problem exists, may county governments have developed no organized method of studying and determining their needs...When the author …

A Study Of The Influence Of A Church School Upon Its Youth, Esther Jane Deweerd

Masters Theses

First Paragraph:

There is a growing need for more effective religious training for youth today. Educators recognize this and articles appearing in our magazine and papers sense it too. Studies and research into what the young people themselves feel also indicates that they recognize this lack in their training. The problem is receiving much thought and study by educators, church workers, and legislators alike, and valuable suggestions appear in these same periodicals, showing us ways of meeting this need. A few examples will show us what they are saying.

Design Of A Wind Tunnel For The Missouri School Of Mines And Metallurgy, William E. Speece

Masters Theses

"For some time there has been a need for a wind tunnel at the School of Mines for experimental work in the Civil and Mechanical Engineering Departments. With the expanding program and the possibility of establishing an Aeronautical Engineering School here, the need will be even more pronounced. So the problem will be of definite practical value. It was the original idea to design a small tunnel, build the tunnel, and to run a series of smoke tests on various structural models. However, after discussing the possibility of such a problem with school authorities, it was decided that if a …

A Preliminary Investigation Of The Titanium-Copper Equilibrium System, August Robert Savu

Masters Theses

"The element titanium has a high degree of chemical activity at room temperature when in a finely divided condition. In the massive state this activity is only exhibited at high temperatures. The powdered metal is highly pyrophoric. Titanium forms quite stable sulphides and carbides, although these are subject to oxidation at high temperatures. It also form nitrides. Titanium being a transitional element forms hydrides with hydrogen which are stable at ordinary temperatures, but which dissociate at red heat liberating the hydrogen and leaving the metallic titanium in a very active state. Alloys are formed with such metals as aluminum, manganese, …

Geology And Mineralization Of The Minerva Mine No. 1, Hardin County, Illinois, Matthew Peter Nackowski

Masters Theses

"This study originally was undertaken to describe the witherite identified in specimens collected at the Minerva Oil Company Mine No. 1, Hardin County, Illinois. The original specimens of witherite were collected on October 25, 1948, by Charles E. Tothill, while on a senior trip through the fluorspar mine. The witherite was identified by Dr. O. R. Grawe, Chairman of the Geology Department, Missouri School of Mines, Rolla, Missouri, to whom the specimens were presented. Dr. Grawe suggested that the writer visit the southern Illinois fluorspar area to determine the occurrence and distribution of the witherite. This mineral had been described …

A Study Of The Power Consumption Of Mine Scrapers, Stanley Francis Johnsen

Masters Theses

"Since scrapers were first employed in underground mining work, numerous changes in scraper design have transpired until now there are several common types of scrapers in use in mines over the world. The proved models of scrapers have been developed over a period of more than fifty years. Although specific scrapers have been tested to determine the amount of power consumed, no literature could be found concerning the relative power consumption of the different types of scrapers when operated under identical conditions. Purpose of Problem - The purpose of this study is to determine the relative efficiency of different types …

Aerodynamic Research For An Improved Rotor Control System On Helicopters, Delmar Wallace Breuer

Masters Theses

"Since the author has always been interested in Aeronautical Engineering, and in particular, rotary-winged-aircraft, the problem of research for aerodynamic improvement of rotary-wing control systems was chosen. This problem was suggested by the Army Aircorps Officials of Wright-Patterson Field of Dayton, Ohio as being a valuable and practical problem for the government. It is also valuable and practical for the author since it follows his general course of undergraduate study and since it fits closely into the field for which he is preparing himself...The requirement with which the author is most concerned is the design system for the producing of …

Analytical Investigation Of Thin And Moderately Thick-Walled Tubing Under Peripheral And Biaxial Loading, Frank Joseph Cizek

Masters Theses

"The problem then, resolves itself into a study of the behavior of thin-walled and moderately thick-walled cylinders under the effects of an external fluid pressure acting alone, or the effects of an external fluid pressure acting simultaneously with an axial loading. In this thesis a theoretical or analytical approach will be used. Some application and reference will be made to oil-well casings in particular, but the solutions will not be restricted to oil-well casing alone. it must be recognized that the tubing problem involves the problem of unstability before the proportional limit of the metal is exceeded and a similar …

The Barite Industry In The United States, James Byron Chaney

Masters Theses

"Within the past few years, barite has become one of the most important non-metallic substance mined in the United States, as expressed by the large increase in production since 1943. The purpose of this treatise is to combine in a single volume important information concerning the geographical distribution, geology, mining methods, milling or beneficiation methods, production and utilization of barite in the United States. A large number of references has been used in preparing this treatment. The information has, as far as possible, been brought up-to-date. It is thought by the writer that the paper will present to the reader …

A Correlation Of Formulas For The Flow Of Fluids In Pipes, John Gorman Duba

Masters Theses

"At present there exist two quite distinct fields in fluid flow in pipes, the one in water supply and the other in the petroleum industry. It is the purpose of this paper to discuss the various pipeline flow formulas as used in both fields and to correlate the exponential type formula which is much used in practice with the Nikuradse curves obtained in the laboratory"--A Brief Historical Review, page 5.

An Investigation Of The Amount And Kinds Of Material Pertaining To Safety Education To Be Found In Social Studies Textbooks, Dorothy D. Osborn

Masters Theses

Chapter I

Introduction

The Problem

In spite of the fact that safety education is acquiring a definitive place in elementary school curricula, there are still many secondary school educators who are indifferent to the need of including work in safety in the already crowded school program. However, our modern mode of living with its increased tempo and its concentration of population has intensified daily hazards to such an extent that the school must consider education for safety as part of its program. Time, effort, and money spent on education of children whose lives are to be taken in adolescence by …

Geology Of The Berryman Area, Washington County, Missouri, Jack Alexander James

Masters Theses

"Purpose and scope - The are discussed in this thesis was selected because of recent exploration for lead within this region and because of the need for more detailed information of the structure and geologic history of the area. The work constitutes part of a program of geologic mapping by the Missouri Geological Survey and Water Resources to complete the mapping of a strip of quadrangles extending across the Ozark Uplift from Rolla eastward to the Mississippi River"--Introduction, page 1.

The Effect Of Spontaneous Crystallization Of Some Inorganic Compounds At The Critical Temperature Of Their Solvents, John William Buttrey

Masters Theses

"For many years the phenomena which occur at the critical temperature of liquids have been investigated. And since 1912, when Laue and other discovered that a beam of x-rays could be made to yield a diffraction pattern by passing it through a crystal, scientists have been attempting to change the x-ray pattern for various crystals by somehow changing the arrangement of the atoms in the crystal lattice. Harvalik has already shown that crystallization occurs when a solvent reaches the critical point and his work indicates that under these conditions of crystallization there is a change in the crystal pattern. The …

Hysteresis Loss Of Supermalloy At Different Temperatures, Chester Ray Holland

Masters Theses

"The object of this investigation was to measure the hysteresis loss of supermalloy at different temperatures, and to see if temperature had any effect on hysteresis loss and permeability. The maximum magnetizing current was held constant for all temperatures"--Introduction, page 1.

A Comparative Study Of Some Rock Drill Bits, Paul Louis Terrasson

Masters Theses

"This paper describes a comparative study which was made of the wear and efficiency of different types of rock-drill bits when used under various drilling conditions...The four types of experiments which were carried out had the following purposes: 1. Determine the influence of the size of the bit. 2. Determine the influence of the design of the bit. 3. Determine the influence of the type of hammer. 4. Compare the performances of steel and tungsten carbide bits in limestone and in granite"--Introduction, page 1.

Radioactivity Of The Pre-Cambrian Section Of The Bourbon, Missouri, Well Core By Measurement Of The Total Hard Gamma Radiation, Paul E. Damon

Masters Theses

"In December of 1947 Mr. Robert Van Nostrand and the writer became interested in the problem of the distribution of natural radioactivity and the applications of radioactivity to geology. A cooperative survey of the literature on the subject was undertaken. Later the writer decided to follow up the survey with a research project. Consultations with Dr. Z. V. Harvalik of the Missouri School of Mines Physics Department, and Dr. E. L. Clark and Mr. O. M. Bishop of the Missouri Geological Survey, followed. The nature of the project was evolved when Dr. Clark, with the consent of the U. S. …

The Solubility Of Copper In High-Iron And Low-Iron Slags, Charles Burroughs Gill

Masters Theses

"A thesis giving the details of construction of a rotating induction furnace and its use to experimentally determine the amounts of copper absorbed in high-iron and low-iron slags at various temperatures. A rotating induction furnace is advantageous for slag study in that the slag is contained in a molten pure metal cup and does not come in contact with any refractory, which would be attacked by the slag and contaminate it. The molten pure metal cup is formed by melting the pure metal in a refractory crucible and spinning this inside an induction coil. The induction coil supplies heat for …

The Use Of Wetting Agents In Clay Bodies, Nathan Russell Sewell

Masters Theses

"It has been observed that one of the weak points in the present method of commercially preparing stiff mud bodies is the de-airing process, which involves passing them thru a vacuum chamber. Difficulties in maintaining a good vacuum, power costs, and work stoppages due to clogged vacuum chambers, are some of the problems. It was thought that perhaps a very definite contribution could be made in the field of ceramic engineering if some method could be devised for preparing a workable ceramic body of good dry and fired properties without the use of a vacuum chamber. In attacking the problem, …

Ceramic Possibilities Of Some Missouri Clays And Shales, Leonard Nathanael Larson

Masters Theses

"Although many of the shales and clays of Missouri have in the past been, or are presently being used for the manufacture of heavy clay products such as face brick, common brick, sewer pipe, and tile, there is in these post-war years a significant shortage of these products within the state and country. Especially in the northwestern part of Missouri is there a distinct shortage, as only one structural clay plant is known to be operating in that area. The St. Louis and Southeastern Missouri districts are better prepared to meet construction demands, with several structural clay plants operating at …

A Study Of Mine Scraper Buckets And Their Efficiency, Austin Bond Clayton

Masters Theses

"The use of power drawn scrapers, often called "slushing", for the moving of ore, stops filling, and waste rock has become standard practice in many mining operations. Several types of scrapers have been developed by practical application or by trial and error methods. However, a direct comparison of these scraper types under identical conditions has not been noted in a review of literature on the subject of mechanical loading. Written inquiries to authorities on scraping practice have brought replies that no previous comparisons of scraper types on a modal scale have been attempted. Therefore, the following thesis problem was set …

An Analysis Of Man Power Efficiency In Drilling Procedures In The Tri-State Mining District, Julian Alban Fuller

Masters Theses

"This thesis embodies the results of an investigation, by the time study method, of certain phases of drilling procedures recently brought into practice in the Tri-State mining district. The field work was accomplished during the months of July, and August 1945; the data obtained therefrom and the analysis presented in this dissertation apply to the practice in effect at that time"--Preface, page ii.

A Study Of The Separation Of Feldspar From Missouri Granite, Vernon Louis Kasten

Masters Theses

"The greatest use of feldspar is as a flux in the Ceramic Industry where it is used in the manufacture of abrasives, floor tile, terra cotta, china, and earthenware of all types. It is also used in the manufacture of glass and enamels, and much is used as grinding medium in powdered form because it is softer than the common abrasive, quartz...Missouri Granites are composed of feldspar, quartz, mica, and other materials, which may or may not occur in all the samples. It is the purpose of this investigation to attempt a separation of the feldspar from these other components …

The Analysis, Evaluation, And Selection Of American History Textbooks For Senior High School Classroom Use, Fred A. Weiss

Masters Theses

Chapter I

The Purpose and Procedure of this Study

Introduction

American history has long held a well-established place in the curriculum of the senior high schools of the United States. In many schools every pupil is required to take American history in order to be eligible to graduate from high school. If American history is not included as a specific subject offered in the curriculum of a senior high school, then one may expect to find it incorporated into some other part of the curriculum, perhaps into a general social studies course.

Recovery Of Manganese From Oxidized Ores As Iron-And Phosphorus-Free Soluble Salts, Emil Pietz

Masters Theses

"There is a great demand at present for this country to develop its manganese resources. The hazards encountered because of the present international crisis make it almost impossible to import high-grade ores. Manganese is one of the most important strategic metals because it is vital to the production of steel. After the stock piles are depleted and the imports decreased, the deficit must be supplied by the domestic deposits. A great deal of research has been done to concentrate the domestic low-grade ores but new problems have always been encountered. The differences in the properties of the low-grade ores from …

A Study Of Former Students Of Maher’S Business College, Merlin J. Claucherty

Masters Theses

Chapter I

The Value of Follow-Up of Teaching and Guidance in Business Colleges

Introduction

It is the constant desire of every business college to keep up-to-date with that which is current in business procedure and education. A number of investigation have been made by placement offices, research bureaus, and training institutions for the purpose of assisting young people to become better adjusted to the community and to determine the supply and demand of employment in the different occupations.

Electrodeposition Of Copper-Lead Alloys From A 7.2 Per Cent Amine Solution Saturated With Respect To Copper And Lead. Study Of The Production Of Cupric Oxide To Be Used As Solute, Edmund Simon Roszkowski

Masters Theses

"The purpose of this work is to deposit electrolytically a copper-lead alloy from an amine solution for use specifically as a bearing metal. Generally speaking there are four classes of bearing metals: tin base alloys or the babbitts; the cadmium base alloys or the white metals; the silver alloys; and the copper-lead alloys. Additions of other metals may be employed to produce alloys with certain desirable properties"--Introduction, page 1.