Digital Commons Network^™

A Method Of Evaluating First Line Supervisory Training, Benjamin I. Killian

Masters Theses

Preface

This study is prepared to establish a method of evaluating supervisory training. An attempt to evaluate the following hypotheses will be considered: (1) There is a method of selecting the basic performance areas of a first line supervisor. (2) There are acceptable standards of performance in the basic area. (3) Performance appraisals prior to the introduction of training will determine sub-standard performance in the selected areas. (4) Follow-up performance appraisals will indicate the effectiveness of training in improving performance without undue contamination of the criteria by other influences.

During the study other areas of investigation to be examined are: …

Sage Of Bluffdale: John Russell, Editor And Writer, Helen E. Sanders

Masters Theses

No abstract provided.

An Office Machines Survey And Its Implications For The Business Education Department At The East Richland High School In Olney, Illinois, Robert W. Akes

Masters Theses

No abstract provided.

Developing In-Service Training In Guidance, Melba A. Huning

Masters Theses

No abstract provided.

Some Problems And Leisure Time Activities Of High Ability Students Of Casey Community High School, C-1, Doris J. Lee

Masters Theses

No abstract provided.

A Study Of Characteristics And Achievement Of Transfer Students Admitted To Eastern Illinois University, David A. Diederich

Masters Theses

No abstract provided.

Proposed Procedures In The Development And Initiation Of An Elementary School Guidance Program, Andrew J. Cain

Masters Theses

No abstract provided.

A Study Of The Effectiveness Of Listening Instruction In Grades Five And Six, Terry R. Shepherd

Masters Theses

No abstract provided.

A Survey Of Merit Rating In Industry, N. K. Nahavandi

Masters Theses

Introduction

Personnel administration is but one phase of industrial management. It has been defined as:

"Personnel administration means organizing and treating people at work so that their effort. singly and collectively, will bring the best results possible. This requires quite specific information about the employee and his job. It implies knowing what the employee is doing, and how and why it differs from what is wanted of him. It implies having some idea of the employees' capacity in relation to the responsibilities of his present assignment. It implies having a measure of the employers' contribution to the organization, and understanding …

A Study Of Aging In An Old Order Amish Mennonite Community, Louise Chahbazi

Masters Theses

Introduction

The Old Order Amish Mennonites, undoubtedly the plainest of the "plain people," have a high regard for the beliefs and customs of their forebears. Their forefathers had no telephones, automobiles, electric lights, radios, or church buildings, so the Amish of today work the land with horses, travel in buggies, burn gas lights, gather in homes for worship services, and wear styles of dress which were common in seventeenth and eighteenth century Europe.

Estimates made on the basis of recorded church membership in the Mennonite Yearbook place the Amish population of the United States at approximately 57,000. Their high birth …

A Study Comparing Two Isometric Contraction Training Methods For Increasing Strength, William Ray Bockwitz

Masters Theses

No abstract provided.

Some Source Materials For Use In Teaching American History To An Accelerated Group In The Junior High School, June B. Bouknight

Masters Theses

No abstract provided.

A Comparison Of A-C And D-C Lead Compensation From D-C Prototype Networks, Piyush Parikh

Masters Theses

"The object of this thesis is to study the difference in transient and frequency response characteristics between a prototype d-c phase lead compensating network and an equivalent a-c phase lead compensating network.

A second order servo is selected to be compensated and five d-c prototype and equivalent a-c phase lead compensating networks are designed. The frequency characteristics of the a-c networks are obtained experimentally and these of the d-c networks are obtained analytically. The characteristics of both networks are compared and their differences are studied. The transient characteristics of the d-c and a-c compensated closed-loop systems to a step input …

A Comparison Of The Load Carrying Characteristics Of Hydrostatic Thrust Bearing Using Monatomic, Diatomic, And Triatomic Gases, Joseph C. Pigott

Masters Theses

"The purpose of this investigation is to compare the load carrying characteristics of gases with different ratios of specific heat. The design, construction, and operation of an apparatus for testing and comparing the load carrying characteristics of gases are described. Several monatomic, diatomic, and triatomic gases were tested and the results evaluated and compared. The data are tabulated and displayed in a series of curves.

It was found that the monatomic gases exhibit a greater clearance for a given load and a greater total load carrying capacity than the diatomic gases which in turn have a greater clearance and total …

Comparative Analysis Of Specific Training And Conditioning Methods Pertaining To Competitive Swimming, Donald Dean Oberg

Masters Theses

No abstract provided.

Problems Involved In Counseling Adolescents, Millie M. Angle

Masters Theses

No abstract provided.

A Guidance Program For The Primary Grades, Ogreata M. Morgan

Masters Theses

No abstract provided.

An Analysis Of The Teacher Education Scholarship Students Of The Classes Of 1959 And 1961 At Eastern Illinois University, Dareld S. Swisher

Masters Theses

No abstract provided.

The Influence Of Economics Upon The Voice Of John Steinbeck: Some Evidence From Selected Readings, Bernard Earl Eagleton

Masters Theses

No abstract provided.

Transpiration Cooling Of A Heat Generating Porous Plate, M. K. A. Hameed

Masters Theses

"This investigation is a continuation of a thesis by T. S. Purewal. Several of the simplifying assumptions made by the above author are either ignored or the justifiability of such assumptions is probed into in order to obtain a more rigorous solution. Effects of the assorted grain size, non-Newtonian cooling, direction of coolant flow, thickness of the porous heat generating plate, specific heat of the coolant, and compressibility of the coolant are investigated in this thesis. Variation of maximum temperature of both coolant and the solid material for different types of heat source distribution are also studied.

As the grain …

A Model Study Of The Behavior Of Elastic Liners In Shallow Underground Openings, Martin Samuel Oudenhoven

Masters Theses

"Models of epoxy resin were used in a stress freezing technique to determine areas of possible failure in lined circular openings. These models were loaded in a centrifuge for a fixed period of time, after which they were analyzed photoelastically. The material characteristic changes, with time, were recorded on graphs and used in the analysis.

Two types of tests were conducted; one, where the lining thickness was changed and, the other, where materials of the liner and plate material were changed.

The resulting analyses furnished proof that the greater the rigidity of the lining, the higher the stress developed in …

A Study Of The Electro-Chemical Injection Of Ca(Oh)₂ Into Pure Kaolin Clay, Sam Michael Savas Jr.

Masters Theses

"The work presented in this thesis is the investigation and study of a possible and successful means of injecting an electrolyte solution into a fine grain soil mass with the use of electric current and to measure some of the changes of its physical properties. A NoKarb Georgia Kaolin Clay was treated by passing a preferential electrolyte solution of Ca(OH)₂ using direct current for a period of one and six days. The tests performed during this investigation included the following: (a) tri-axial tests, (b) atterberg limits, (c) pH determination, (d) moisture content change (from treatment), (e) visual settling of treated …

A Study Of The Problems Of Design Of Optimum Vibration Absorbers For Multi-Mass Systems, James C. Villegas

Masters Theses

"The purpose of this investigation was to continue the preliminary work of Burrows on the application of tuned and damped vibration absorbers to the reduction of vibratory stresses in a multi-mass torsional vibration system. A hypothetical engine system was chosen for both investigations because it had many complicating factors and gave an eminently practical subject for study.

Attention was centered on the reduction of stresses resulting at higher speeds of the machine system and on developing methods and criteria for the designing of effective absorbers where several modes of vibration exist in the operating speed range of the machine"--Abstract, page …

A Study Of The Stress Distribution Around Circular Openings Using Multilayered Photoelastic Material, Donald Frank Haber

Masters Theses

"Stress analysis as applied to mine openings ranges from the completely empirical to the completely theoretical. However, it is only through the ultimate utilization of the two methods that a guide to the Interpretation of mine stress phenomenon may be obtained. The bridge between the two approaches lies in the field of model study. Specifically, this is an Investigation into determining the feasibility of using multilayered photoelastic materials in models such that a more exact approximation of the underground stress distribution around mine openings can be made.

The two major objectives in this study for determining the feasibility of using …

Model Analysis By The Moiré Method, David D. Kick

Masters Theses

"This study presents the use of Moiré fringes for model analysis of deflections and strains. Deflection of a beam, strain in a disk, and an Influence diagram for a frame are presented as examples of uses of the Moiré method. The necessary equations for the determination of strain using the Moiré method are also derived and presented in this work"--Abstract, page v.

Porous Cooling Of A Pile, Tarsem Singh Purewal

Masters Theses

"In this investigation the problem of a limiting case of steady state one dimensional solid-fluid Newtonian heat transfer is examined in which an incompressible non-heat generating coolant fluid is flowing through a heat generating porous plate.

The effect of grain size on the Newtonian heat transfer in the porous plate with various kinds of internal heat generations is determined analytically. The temperature difference between the solid and the coolant fluid through the porous plate is determined. All the previous studies assume that in the porous plate, coolant fluid temperature and solid temperatures are approximately equal. This analysis eliminates this simplifying …

A Study Of Several Commercial Steels In The Red Short Range, Jorge Alberto Espana

Masters Theses

"The red short phenomenon present in steel, was studied by means of torsion tests at temperatures between 800 and 1200⁰C. Cold drawn bars of different compositions of steels were tested, and the number of turns to failure and maximum twisting torque were plotted versus temperature.

All the steels tested, exhibited to have a certain degree of red shortness. By comparing the curves and the respective chemical analyses, the detrimental effect of sulphur and lead and the beneficial effect of manganese, was established.

Microscopic examinations revealed the intergranular nature of the cracks in the red short range. Sulphur and oxide distribution …

Permeability Of Poly (Ethylene Terephthalate), James G. Harvey

Masters Theses

"Corrosion is a phenomenon which has been the subject of extensive research, in order to find a way to control or completely stop it. Two general methods, either placing the material which corrodes in an anti-corrosive atmosphere or protecting the material which corrodes from the corrosive atmosphere, are the chief means of preventing corrosion today.

The second method is probably most widely used presently. One of the most important methods of protection is by means of organic protective coatings, or paints, but at best these only retard corrosion, due to the fact that corrosive media e.g. water vapor, ions etc. …

Development Of A Simple Bar Method Thermal Conductivity Test, V. J. Flanigan

Masters Theses

"A linear flow bar method type apparatus was set up for finding thermal conductivities by comparison techniques. Comparison technique consist of using a standard specimen where the thermal conductivity is known and comparing it to the unknown specimens to find their conductivity. Apparatus of this type usually uses thermocouples for the required temperature measurements, but thermistors were used in this experiment. The thermistors used required calibration to measure accurate temperatures and this was accomplished by using the known temperatures of the changes of state of some common materials. Five alloys were used to evaluate the method: SAE 1020 steel, gray …

The Effect Of The Rolling Load On The Micro-Structure Of Low Carbon Sheet Steel, Jerry Lee Cadden

Masters Theses

"A Stanat 315, two high-four high, combination rolling mill is used to cold roll annealed, low carbon steel strips. A method of measuring the rolling load was presented. The method consisted of constructing a load cell using SR-4 strain gages attached to a steel column. The load cell was placed under the hold down screw of the rolling mill and a known load was applied. The stresses from this load were transferred to the mill housing where another SR-4 strain gage was located. The strain in the mill housing was recorded at the corresponding applied load. During rolling, the strain …