Digital Commons Network^™

The Barite Industry In The United States, James Byron Chaney

Masters Theses

"Within the past few years, barite has become one of the most important non-metallic substance mined in the United States, as expressed by the large increase in production since 1943. The purpose of this treatise is to combine in a single volume important information concerning the geographical distribution, geology, mining methods, milling or beneficiation methods, production and utilization of barite in the United States. A large number of references has been used in preparing this treatment. The information has, as far as possible, been brought up-to-date. It is thought by the writer that the paper will present to the reader …

Further Studies - Heat Transfer Coefficients For Liquids In Forced Convection Normal To Banks Of Staggered Tubes, Terrell C. Claunch

Masters Theses

"The problem for these experiments may be divided into two sections. The first section of the problem consists of setting up procedure for duplicating data. The second section is that of studying and explaining characteristics of the resulting curves. Correlation of the data obtained will be necessary in order to obtain the curves. In order that the first section of the problem could be solved it was necessary to establish a standard of cleanliness for the apparatus used. Establishment of procedures for the operations and cleaning of the apparatus was necessary. Before Kenneth E. Rudert began his design and construction …

Effect Of Transition Elements On The Transmittance Of B₂O₃ Glasses, Chandubhai Gordhanbhai Amin

Masters Theses

"For many years, boric oxide has been used extensively as a minor constituents in silicate glasses, because of its beneficial influence on their physical properties as well as on glass melting processes; but when used without silica or in too large proportion, the resulting glasses lack chemical durability...Because of its detrimental effect as a major constituent in silicate glasses or in borate glasses, very little work has been done on borate glasses, especially on colored borate glasses...The purpose of this investigation is to find out the effect of the transition elements on the transmission curves of the colored borate glasses"--Introduction, …

Preparation Of Copper Single Crystals By Means Of Powder Metallurgy Methods, Wei-Kung Chang

Masters Theses

"Since different mechanical properties of metals result from different grain size became known, the metallurgists have been interested in finding out the true nature of the grain boundaries. Consequently, several different theories concerning the mechanism of recrystallization, grain growth, and the structure of metals were advanced and studied. These threw much light on the difference of properties between polycrystalline metals and single crystals of the same metals. The single crystals of metals were studied because they enabled the investigator to determine the important points of metallic behavior. The first work on single crystals was rather obscure and limited to isolated, …

An Investigation Of An Electronic Ignition System For Internal Combustion Engines, Richard David Wheat

Masters Theses

"Many types of electric ignition systems have been developed, used, and discarded in favor of systems less expensive and more adaptable to internal combustion engines, Two types which might be classified as high-tension, jump-spark systems are in common use today. These two systems are (1) Battery-coil ignition used mainly on automobiles, and (2) Magneto-ignition used extensively on aircraft engines. A considerable amount of work has been done to determine the extent to which the character and intensity of the electric spark affect the ignition process. This work has revealed that a certain minimum amount of energy is required from the …

Barium-Tin Alloys, James Richard Whanger

Masters Theses

"The author attempted to produce alloys of barium and tin using metallic barium and barium hydride. Also, an attempt was made to study the phase diagram using thermal analysis and X-ray investigation"--Introduction, page 2

Efficiency Of Various Types Of Reinforcement In Controlling Opening Of Cracks In Concrete Pavements, Frederick Richard Heartz

Masters Theses

"To date very little work has been done on the subject of the amount of crack opening for different loads on concrete pavement. It is a known fact that these cracks must be held together sufficiently to have aggregate interlocking action if the pavement is to transfer loads from one edge of a crack to the other. The maximum permissable [sic] opening has been set at .027 inches by the Highway Research Board. The author has attempted in this investigations (1) to determine the effect of different spacing and different sizes of longitudinal and transverse wires in controlling crack opening …

A Study Of Cathode Drift Compensation In D-C Amplifiers, Joseph W. Rittenhouse

Masters Theses

"The expression, cathode drift, has to do with the random variations in vacuum tube plate current which are attributable to similar variations in emission velocities of electrons leaving hot cathodes. The fact that these random current changes appear to result from spurious drifts in cathode potential, since all other electrode potentials are unrelated to them, give rise to the expression, cathode drift...The problem with which this paper is concerned is a study of some of the possibilities of compensating for cathode drift effects in a single amplifier stage. Specifically, this paper will: (A) present a detailed mathematical and graphical analysis …

The Establishment And Analysis Of A Triangulation System For The Teaching Of Advanced Surveying, Philip Blaine Newlin

Masters Theses

"The first thought of establishing a triangulation system for the University of Arizona student work was conceived early in the fall of 1947, when the author first learned that he would be in charge of the advanced surveying field parties during the spring semester. These men were to be instructed in the accepted manner of conducting surveys of higher order. This would include the measuring of a base line of second or first order accuracy, the turning of horizontal angles with this same degree of accuracy, the determination of the azimuth of the lines by astronomical observations, the running of …

A Graphic Method For Determining Pressure Losses Due To Air Friction In Mine Airways, Robert F. Bruzewski

Masters Theses

"One of the most important factors that influence the selection of a fan or blower for circulating a desired quantity of air through mine workings is the total pressure that is required to overcome the resistance of the airways. Ordinarily, the major portion of this resistance is that caused by friction of the moving air on the surface of the airways. The pressure that is required to overcome this frictional resistance is calculated by means of the friction formula"--Introduction, page 1.

A Correlation Of Formulas For The Flow Of Fluids In Pipes, John Gorman Duba

Masters Theses

"At present there exist two quite distinct fields in fluid flow in pipes, the one in water supply and the other in the petroleum industry. It is the purpose of this paper to discuss the various pipeline flow formulas as used in both fields and to correlate the exponential type formula which is much used in practice with the Nikuradse curves obtained in the laboratory"--A Brief Historical Review, page 5.

The Theory Of Limit Design As Applied To The Design Of A Continuous Beam Over Three Supports, Robert F. Davidson

Masters Theses

"The theory of Limit Design is the application of the theory of Plasticity to the estimation of the actual carrying capacity of a structure. In this theory, as it is applied to statistically indeterminate structures, the areas of most unfavorable stress are allowed to be stressed beyond the yield point and into the plastic range of stress. It was formerly held that, by assuming elastic behavior, all questions of strength of materials that concern the Structural Engineer were capable of solution. However, it is now becoming recognized, from actual measurements of deformations of structures and from tests carried to near …

Reduction Of Zinc Sulphide In A Vacuum, Tien-Shih Liu

Masters Theses

"The successful large scale commercial application of high vacuum for high temperature metallurgical operations is a comparatively new development. The use of Pidgeon and the carbothermic processes for the production of magnesium during the war forced a perfection of both equipments and techniques for high vacuum operations. This opens broadly the way for a great expansion of vacuum metallurgy. Vacuum operation is thus no more a laboratory method - it is a kind of industrial practice. Many metallurgical operations, which cannot be carried out by ordinary processes, are made feasible when conducted in a reduced pressure. typical examples are the …

The Effect Of Silicate Ion And Hydroxyl Ion On The Abstraction Of Potassium Ethyl Xanthate By Galena, Pao-Zung Wu

Masters Theses

"The purpose of this research was to investigate the effect of the silicate ion and the hydroxyl ion on the removal of potassium ethyl xanthate by galena; since the former ion is encountered during flotation owing to dissolution of silicates, and also sodium silicate being often used to disperse gangue minerals, and the latter one is encountered during floating in an alkaline circuit"--Introduction, page 1.

A Proposed Program For The Veterans’ Institute At Dowagiac, Michigan, Harold E. Telfer

Masters Theses

Chapter I

Introduction

The close of World War II and the return to civilian life of its large number of young men and women veterans has been a period of rapid adjustments. A large number of these adjustments have been facilitated, or at least affected, by the legislative provisions of the national government. These provisions, in turn, have been affected by the applications made of them by local communities and their agencies. One example of the local application of the aims of the veterans' benefit laws is the Veterans' Institute jointly sponsored in Dowagiac, Michigan, by the Cass Country Veterans' …

An Investigation Of The Amount And Kinds Of Material Pertaining To Safety Education To Be Found In Social Studies Textbooks, Dorothy D. Osborn

Masters Theses

Chapter I

Introduction

The Problem

In spite of the fact that safety education is acquiring a definitive place in elementary school curricula, there are still many secondary school educators who are indifferent to the need of including work in safety in the already crowded school program. However, our modern mode of living with its increased tempo and its concentration of population has intensified daily hazards to such an extent that the school must consider education for safety as part of its program. Time, effort, and money spent on education of children whose lives are to be taken in adolescence by …

A Microwave Polarimeter, Alfred E. Schwaneke

Masters Theses

"The dissertation on the following pages may read more like a construction article than an approach to a study of physical phenomena. If so, its purpose is clearly defined. this subject has been studied little from an experimental viewpoint, so one of the main objectives of this writing is to describe the instrument so others may read the article and reproduce this or an equivalent device without a great amount of reading and searching for information on just how to fabricate and mount the parts. No single book or article that I know of covers the inexpensive construction of such …

Air Cooled Engine Cooling Fins Redesigned By Use Of The Membrane Analogy For Heat Conduction, Eberhard Hammel Miller

Masters Theses

"The purpose of this investigation is to determine the feasibility of applying the two-dimensional heat conduction membrane analogy to the redesign of cooling fins of air-cooled engines"--Preface, page ii.

Properties Of Wire Suitable For The Fabrication Of Wire Cloth, Campbell William Floyd Funk

Masters Theses

"In the highly competative [sic] wire cloth industry, improvement of product quality is of paramount importance. With an eye to the future, the Ludlow Saylor Wire Company of St. Louis decided to embark upon a research program with the hope of improving the quality of their products above already high standards. An industrial research fellowship was instituted at the Missouri School of Mines and Metallurgy at Rolla for graduate research studies of the metallurgical, mechanical and chemical properties of wire as the [sic] pertain to the weaving of industrial wire cloth. Although relatively small quantities of wire are defective, their …

The Influence Of Grade Strength On The Efficiency Of Gelatin Dynamite, Kenneth George Ackermann

Masters Theses

"This study of the relative effectiveness of different grade-strengths of Special Gelatin dynamite in dolomitic limestone was conducted at the Experimental Mine of the Missouri School of Mines and Metallurgy, Rolla, Missouri"--Introduction, page 1.

A Test Method For Measuring The Flow In Refractory Materials At High Temperatures, Christen Knudsen

Masters Theses

"One of the most important properties of refractory materials is the ability to resist stress which may either be directly applied or originate in the material. The factors which govern the resistance to stress include the modulus of elasticity, the ultimate strength under different types of stress, and the "flow" characteristics which become of importance when the material is stressed at the temperature at which plasticity is developed. Systematic determinations of the mechanical properties such as modulus of elasticity and ultimate or breaking stress is rather difficult or more or less impossible to carry out at the temperature at which …

Synthesis Involving Waste Carbon Dioxide, Glenn Eldon Brand

Masters Theses

"Many industries, ranging from power plants to breweries, produce large quantities of carbon dioxide as a by-product. The burning of limestone with natural gas produces a relatively clean gas in which the carbon dioxide content may exceed 40 per cent. It is with this type gas that the present thesis will be concerned. In this process the burning of the limestone is accomplished by using natural gas as a fuel, burning usually under a pressure of about two pounds, and obtaining carbon dioxide from the combustion of the gas and the decomposition of the limestone. Such a plant producing 70 …

Geology Of The Berryman Area, Washington County, Missouri, Jack Alexander James

Masters Theses

"Purpose and scope - The are discussed in this thesis was selected because of recent exploration for lead within this region and because of the need for more detailed information of the structure and geologic history of the area. The work constitutes part of a program of geologic mapping by the Missouri Geological Survey and Water Resources to complete the mapping of a strip of quadrangles extending across the Ozark Uplift from Rolla eastward to the Mississippi River"--Introduction, page 1.

The Effects Of Moisture In Grog Upon Dry Pressed Mixes Containing Grog, Charles L. Mckinnis

Masters Theses

"It has been found that the aging of clay-grog-water mixes before pressing proves to be quite beneficial. The purpose of the aging period is to allow the added water to disseminate throughout the mixture of clay (plastic) and grog (non-plastic) in an effort to bring about the best bonding action possible. The clay-grog-water mixture, if not aged, is of a sticky consistency; while, if the same mixture is aged for twenty-four (24) hours, it is readily workable. This process of aging has long been recognized as a "must" in the Ceramic Industry in obtaining mixtures of ideal workability"--Introduction, page 2.

The Design, Construction, And Testing Of A Heat Exchanger For Determining Heat Transfer Coefficients For Liquids In Forced Convection Normal To Banks Of Staggered Tubes, Kenneth Edwin Rudert

Masters Theses

"Many studies of heat transmission have been carried out on various kinds of heat exchangers. Film coefficients have been determined and the data correlated by equations. In particular, film coefficients have been obtained for gases in turbulent flow normal to both a single cylinder and banks of staggered tubes. Very little data has been published on liquid film coefficients for flow at right angles, or normal to banks of staggered tubes...It is the purpose of this paper to present the results obtained from tests made on an originally designed heat exchanger built in the laboratory. The exchanger is a non-baffled …

The Effect Of Spontaneous Crystallization Of Some Inorganic Compounds At The Critical Temperature Of Their Solvents, John William Buttrey

Masters Theses

"For many years the phenomena which occur at the critical temperature of liquids have been investigated. And since 1912, when Laue and other discovered that a beam of x-rays could be made to yield a diffraction pattern by passing it through a crystal, scientists have been attempting to change the x-ray pattern for various crystals by somehow changing the arrangement of the atoms in the crystal lattice. Harvalik has already shown that crystallization occurs when a solvent reaches the critical point and his work indicates that under these conditions of crystallization there is a change in the crystal pattern. The …

The Mechanical Anchorage Value Of The Transverse Wires In Welded Wire Reinforcement Fabric, Ernst August Weinel

Masters Theses

"The tests reported in this paper were performed in an effort to secure data concerning characteristic properties of Welded Wire Reinforcement Fabric. This fabric has been used, up to the present time, primarily for temperature reinforcement. Limited attention has been focused on its potentialities for use as main tension reinforcing steel, particularly concrete highway slabs and floor slab reinforcement for buildings. The manufacturers of the Welded Wire Reinforcement Fabric believe their product can be used to better advantage as main tension reinforcement in reinforced concrete structures both from an economic and structural viewpoint, than structural steel reinforcing bars"--Object of Research, …

Hysteresis Loss Of Supermalloy At Different Temperatures, Chester Ray Holland

Masters Theses

"The object of this investigation was to measure the hysteresis loss of supermalloy at different temperatures, and to see if temperature had any effect on hysteresis loss and permeability. The maximum magnetizing current was held constant for all temperatures"--Introduction, page 1.

Liquid-Vapor Equilibria In The System Methanol-Ethylene Glycol-Water, John Wilson Sjoberg

Masters Theses

"The freezing points of the system methanol-glycol-water were investigated by Conrad, Hill and Ballman to determine the suitability of such mixtures for use as an antifreeze. The low freezing points obtained seem to warrant further investigation of other properties of the system. Especially important would be the vapor-liquid equilibrium relations of the system, since one of the desirable features of such a mixture would be low vapor pressures. It is well known that when one substance is dissolved in another, each lowers the vapor pressure of the other. It was for the purpose of determining these relations that the present …

A Study Of The Separation Of Wolframite From Tin-Oxide, Chih-Wen Ying

Masters Theses

"A number of mines in china, Bolivia, England, and other countries contain both tin-oxide and wolframite. Owing to the fact that the specific gravity of tin-oxide and wolframite is so nearly the same, considerable difficulty is experienced in making a gravity separation, and all attempts to do so by wet or dry concentration have given very poor results. The perfection of magnetic separators has done much to mitigate this difficulty, so that now complex ores of this nature can be treated in a satisfactory manner. The mixed concentrate from the tables or other concentrators, after being roasted to expel sulfur …