Digital Commons Network^™

A Correlation Function For Liquid Argon, Walter Graham

Masters Theses

"X-ray scattering patterns have given considerable information concerning atomic distributions in matter, both crystalline and amorphous. Work on the diffraction of x-rays by crystals was begun in 1912 by Friedrich, Knipping, and Laue, and much valuable information concerning the arrangement of atoms in crystals has been supplied by this method. Diffraction of x-rays by gases was studied as early as 1911, and work in this field has given information concerning the arrangement of atoms in molecules and electron distribution in atoms. Work on the diffraction of x-rays by liquids was begun by Friedrich who obtained diffraction patterns of Canada Balsam, …

A Method Of Mining The Kumtepe Lignite Deposit Of Turkey, Hilmi Dokuzoglu

Masters Theses

"The Agacle lignite deposit, as a potential source of fuel, near Istanbul, Turkey has been used in this study to apply the principles of strip mining operations. The details of the deposit upon which this thesis is predicated will be presented later in this paper.

The fuel requirement of the city of Istanbul with a population of nearly a million is considerably greater then can easily be met. Some of the fuel needs are accommodated by electrical energy by producer gas, by bituminous coal brought from Zonguldak (about 200 miles from the city), by charcoal, and by fuel wood. During …

An Analysis And Evaluation Of Industrial Arts Projects Used In Midwestern Ohio, Henry W. Krause

Masters Theses

Chapter I

Introduction

Philosophy and Aims of Secondary Education

Recent social and economic conflicts have caused educators to examine their philosophies in the light of the needs of present-day society. The cultural view of education has given way to a growing emphasis upon the importance of functional education. Bode¹ tries to account for this when he says that the "rugged individualism" based upon a policy a "laissex faire" has changed to a conception that industry must contribute to the continuous development of functional education.

The classical curriculum of yesterday does not serve the youth of today with respect to …

Effects Of Wave Action Upon The Design Of The Breakwater For Istanbul Harbor, Melih Suat Durusan

Masters Theses

"The city of Istanbul is situated on the southern entrance of the Bosphorus which separates Asia from Europe; at the same time it is the only strait that leads to the Black Sea. Istanbul is the city that connects Europe-Asia highways and railways. These features show that Istanbul is a very important port. The Golden Horn and the southern end of the Bosphorus constitute a natural harbor which has been in use for many years. Although the natural harbor has served its purpose in the past, the present conditions necessitate the presence of a new harbor...One economical method of improving …

The Temperature Within A Homogeneous Plate Of Finite Thickness, Charles R. Remington

Masters Theses

"The object of this thesis is to determine by an analytical method the temperature within a homogeneous plate of finite thickness subjected to a constant temperature on one side and a periodic fluctuating temperature, expressible in a Fourier series, on the opposite side. This problem in periodic temperature changes has not, to the author's knowledge, been solved previously. The flow of heat in the problem is considered in only one direction, the x-direction. Flow in the other two directions is considered negligible, or zero. Periodic temperature changes in the earth are of importance. The temperature changes have been used by …

Calculations Of Maximum Sag Of A Transmission Line With An Ice Load On One Span, Rodney A. Schaefer

Masters Theses

"An important problem concerning electric power lines is the calculation of the maximum sag occurring when there is an ice load on only one span. The object of this thesis is to determine a practical method for calculating the maximum sag of a transmission line, suspended on suspension insulators, with the aforementioned loading conditions. This paper is limited to the case where the supports of the transmission line are at equal elevations and all span lengths are equal"--Introduction, page 1.

A Study Of Mine Scraper Efficiency On Materials Of Different Specific Gravities, Kermit Guy Rowley

Masters Theses

"The purpose of this study is to determine the effect that the specific gravity of the material scraped has on the power consumption and the efficiency of the common types of mine scrapers. As scraper weight, rope speed, and moisture content of the muck are important factors affecting the power consumption and efficiency, these variables are the ones considered for each type scraper. Two materials of different specific gravities are used in the study with an equal number of tests run on each material"--Introduction, Purpose of Problem, page 2.

Efficiency Studies Of The Effect Of Moisture On The Power Consumption Of Mine Scrapers, Georges J. Vigier

Masters Theses

"Many years of practice have resulted in the standardization of several types of scrapers which are now commonly manufactured for use in mining. Although experience has brought out much information on scraping operations, no systematic studies of the efficiency of mine scrapers have been carried out before the experimental works done in the last few years at Missouri School of Mines and Metallurgy. "Purpose of Problem": The purpose of this present study is to consider the effect which moisture in the muck has on the efficiency as regards power consumption and amount of material scraped, of different types of mine …

A Study Of The Efficiency Of Split-Second Delay Electric Blasting Caps In Underground Limestone Mining, John B. H. Fitzwilliam

Masters Theses

"The introduction of electric blasting caps have delay intervals of the order of one-half to one second proved of advantage in many aspects of underground mining, particularly development work. Their use spread, until they now supersede fuse-and-cap firing wherever possible. Split-second delay electric blasting caps are a comparatively recent development from conventional delay caps. They have been found of practicable use in quarrying operations, and have been applied in many phases of underground mining. While evidence, to show that short-delay firing in quarrying is more efficient than instantaneous firing, is becoming increasingly conclusive, it remains to be proved that split-second …

The Freezing Temperatures Of The System Aniline-Ortho Toluidine, Ray W. Fahien

Masters Theses

"The purpose of this investigation was to determine the freezing temperatures of the system aniline-ortho toluidine and to speculate on the theoretical significance of these results. The properties of this system are of considerable practical engineering interest since the system falls in a class of low-freezing organic mixtures which may have value as fuels for jet propulsion devices required to operate at extreme altitudes or in Arctic regions. Since nitric acid has been found to be a very effective and convenient oxidizer, the search for a suitable fuel to be used in combination led to aniline as having the most …

The Determination Of The Solubility Of Hafnium Oxide In Aqueous Solution By The Radioactive Tracer Technique, Hampden O. Banks

Masters Theses

"To date, there is no information in the open literature concerning the solubility of hafnium oxide in water other than the fact that it is very insoluble. This lack of experimental information is due, partly, to the fact that hafnium is a relatively new addition to the list of known elements"--Introduction, page 1.

Hydraulic Scale For Measurement Of Dynamometer And Other Forces, John Richard Barton

Masters Theses

"The object of this investigation is to design, build, test, and develop, a hydraulic type scale primarily to be used for measuring dynamometer forces. The scale however is not limited to use on dynamometers, but may be used for other types of force measurements such as the continuous weighing of material on a conveyor belt in conjunction with a recording pressure gage. The scale has numerous applications in determining forces where conventional scales are now used. This particular subject was chosen because of the need for a convenient, inexpensive, and accurate scale for use in measuring the force exerted by …

A Comparative Study Of Some Rock Drill Bits, Charles Roger Knopp

Masters Theses

"The detachable single-use rick-drill bit has attracted considerable attention in the mining industry of the United States during the past few years. While this type of bit has been used for some time in other countries, it has been only recently that these bits have been manufactured in the United States. It was decided to test this type of bit and make a comparative study of a single-use bit and a widely used detachable rock-drill bit"--Introduction, page 1.

A Study Of Cast Eutectic Structures By Means Of Optical And X-Ray Microscopy, John Stanton Winston

Masters Theses

"The present research is the result of interest in two rather broad, and at first thought, seemingly entirely separate topics: the structure of eutectics and x-ray microscopy. D. Hanson in 1923 in his correspondence with Albert M. Portevin in regard to his article on the structure of eutectics states, "A point that always stuck him (D. Hanson) in examining eutectics was that one of the constituents always formed a continuous phase round the other one. The orientation of one constituent was either constant or varied in a uniform manner. What, however, was the condition of the 'enveloped' constituent, which formed …

Velocity Studies In A Vertical Pipe Flowing Full, Robert Franklin Tindall

Masters Theses

"The purpose of this investigation is to install a hard drawn copper pipe approximately 1/2 inch in diameter, and approximately 35 feet long in a vertical position. The copper pipe is to have pressure takeoff points at various distances along the length of the pipe. The purpose of these takeoffs is to measure the pressure of the water at the point of takeoff in the pipe. The water is to be forced into the pipe, assisted by gravity, thereby causing a pressure of some measurable quanity [sic] greater than absolute zero pressure. The discharge was to be by volumetric measurement, …

Thermal Recovery Of Petroleum By Electrical Heating, Harold Roy Coffer

Masters Theses

"It is the purpose of this investigation to study the feasibility of recovering oil from laboratory size cores by passing electric current through the formation. If a voltage of sufficient magnitude could be applied to the formation to cause a flow of current, the formation would be heated. This heat should stimulate the flow of oil. The expansion of any gas present in the core together with the formation of hydrocarbon vapors should provide sufficient expulsive force to drive oil from the core. The effect of power expenditure, the necessary voltages, the changes of conductivity and power factor of the …

Solid Solution In The Series Sodium Tungsten Bronze, Lithium Tungsten Bronze And Tungstic Oxide, Godrej F. Doctor

Masters Theses

"The tungsten bronzes are a series of anionic substitutional solid solutions of alkali metal metatungstates and tungstic oxide. They are neither alloys nor intermetallic compounds, the term tungsten bronzes was adopted because of their remarkable metallic properties, e.g. luster, specific gravity and especially high electrical conductivity, which resembles to that of graphite. Due to its chemical inactivity and beautiful shades of color, it is used as a coating, especially in the plastic industry and for other ornamental products. The properties and the structure of these bronzes have not been investigated entirely satisfactory; within the last twenty years, only a few …

A High-Temperature X-Ray Diffraction Camera And Its Application To Copper And Titanium, Robert R. Penman

Masters Theses

"The purpose of this research was threefold, and consists of the following sections: 1. Effective use of a high temperature x-ray camera, capable of reaching temperatures of 1000 ºC. 2. Investigation of the thermal dilation of certain cubic metals. 3. Accurate determination of the lattice constant (aₒ) of Beta Titanium at 900 ºC "--Introduction, page 1.

The Nature Of Molecular Films Of Oleic Acid On Quartz, Kenneth Lee Keating

Masters Theses

"The purpose of this research was to show the nature of oleic acid on quartz mineral by transferring calcium oleate films, known to be monomolecular and of a definite orientation, to the surface of a piece of quartz, and measuring the resulting coated mineral by contact angle technique"--Introduction, page 1.

The Study Of Effect Of Definite Grain Sized Sand On The Shearing Strength Of Clays, Faruk Omer Akkoseoglu

Masters Theses

"Slopes of all kinds, including mountains, hills, sea coast bluffs, river banks, and man made cuts and fills, stay in place only because of the shearing strength possessed by the soil or rock of which they are composed. The resistance of soils to shearing strength is probably the most important of all the soil properties to foundation engineers. Most of the serious structural failures which are due to unexpected soil behaviour are caused by deficiency in the shearing strength of the soil. Water, on the other hand, possesses no static strength in shear, therefore bodies of water have no surface …

Effects Of Sand Admixtures On The Physical Properties Of Soils, Necati Kanatsiz

Masters Theses

"The purpose of this study is to determine the effects of sand admixtures on the physical properties of soils. Soil may be defined as a heterogenous [sic] collection of rock and mineral fragments whose decomposition and disintegration have been brought about by the action of physical, chemical, and biological forces, working singly or in combination...In the conviction that the study of soils, with respect to highway engineering, is becoming more and more important this study was undertaken in order to learn whether the addition of sand would lead to desirable results, and if not, at least secure some further addition …

The Theory Of Limit Design As Applied To Column Analysis, John Francis Mccarthy

Masters Theses

"In any discussion of compression members of a structure, account has to be taken primarily of the relative "slenderness" or bending weakness of the member. If the member be so short that axial loading causes very slight deflection at any point throughout the member, it is usually designated a simple compression member and no account is taken of the additional stresses due to the deflection. When, however, the ratio of the length to the least radius of gyration of the member becomes so large that bending stresses cannot be ignored, the member is usually called a column and its consequent …

Periodic Heat Flow In A Semi-Infinite Solid, Warren George Heidbrier

Masters Theses

"The object of this investigation is to determine by analytical means the temperature within a homogeneous semi-infinite solid, as a function of time, while the solid is receiving heat periodically by radiation on its one flat surface. Periodic heat flow means that heat flow is a continuous function of time and repeats itself at regular intervals. A semi-infinite solid has only one bounding plane and extends to infinity in all other directions...Much of this work deals with the soil temperatures of the earth both at the surface and at various depths. The surface of the earth is subjected to daily …

An Experimental Study Of Crystallization In Opal Glass, William C. Rous

Masters Theses

"Opal glasses are well known from use in such forms as ointment jars, lighting globes, wall panelling [sic], and decorative effects in glass vases. Cryolite, fluorspar, and sodium fluosilicate are used in varying proportions in most glasses of this type. Since little is known of the mechanism of crystallization in opal glass, there is a definite need of gathering further information on this subject. This information is of particular interest to the manufacturers whose products consist of this type of glass. Further information would aid in control of the characteristics desired and perhaps would allow a more economical control"--Introduction, page …

Design And Test Of An Apparatus For Rate Measurements Of Rapid Gas Reactions, Erich Rolaff

Masters Theses

"The present study on rapid gas reactions was initiated with two main goals in view. The first objective was the development of equipment and methods for the treatment of problems arising in extremely rapid gas phase reactions. In recent years, with the advent of large scale applications of gas turbines and rocket motors, the process of high speed gas reactions, especially those of combustion and oxidation have become of increasing importance...The second main goal of the work was to apply the methods and equipment developed to the investigation of chemical systems of interest"--Introduction, page 1-2.

Effect Of Removed Web-Section On Critical Load For I-Beam Columns, Henri Simon Rigo

Masters Theses

"This investigation deals with a series of column tests of aluminum I-sections which have a perforated web. Specifically, the tests show that the weight is decreased without decrease in strength. Several basic assumptions are made in the design of a column. The physical action of a column is idealized in the derivation of formulae which will predict within reasonable limits the load which the member will sustain. In a given installation of non-homogeneity of material, kinks, uneven bearing, lack of symmetry due to riveting or welding, stress concentration and many other disturbing factors not in agreement with these assumptions may …

The Application Of The Relaxation Method To The Solution Of Steady-State Heat Transfer Through A Concentric Square Insulator, William Edward Simpkin

Masters Theses

"It is the object of this thesis to express the relationship between the heat transfer through a square insulator of variable inside-outside dimension ratios, in terms of a concentric round insulator of the same inside-outside diameter ration, by means of a continuous curve. Mathematically speaking, this thesis will have a plot of a variable coefficient, c_s, to be used...in terms of the ratio of the width of the outside square to the width of the inside square"--Statement of Problem, page 8.

Flood Control With Retarding Basin Type Reservoirs In Meramec Basin, Missouri, Ilhan Kaya Ozbilen

Masters Theses

"When rainfall occurs that provides more runoff than can be carried within the normal channels of existing streams a flood results. The excess water overflows the valley lands, invades developed areas, and causes destruction of property or, in extreme cases, loss of human life...Many structures are built to control water: Waterways of proper depth and width provide arteries of transportation; water controlled and discharged through water-wheels provides power; water may be caught in storage basins and distributed for irrigation or water supply; and water that is an actual or potential source of damage or danger to property or to human …

The Precipitation-Runoff Relationship On The Grand River Basin Of Missouri And Iowa, J. Kent Roberts

Masters Theses

"In the study of a drainage basin which is to be utilized for water supply or water power, there is frequently a dearth or complete lack of runoff data, though precipitation data are almost always available. The Water Resources Branch of the United States Geological Survey maintains gaging stations on various streams and runoff records from these streams are available from their publications and offices. Many of these runoff records cover a considerable number of years, and are entirely sufficient for use in an analysis of any drainage basin covered by such data. Some of these gaging stations have not …

A Determination Of The Economic Feasibility Of Producing Marginal Gas Wells, Horace Tharp Mann

Masters Theses

"The purpose of this investigation is to show that it is economically feasible to produce marginal gas wells in such a manner that all the gas from the edge of the field will be captured by the first row of wells. In this problem the permeability of the sand is to be variable but known, and the effects of this variable permeability on the pressure distribution, and resulting gas production, will be discussed.

In many gas fields the point at which it is generally considered unprofitable to drill new wells is well inside the boundary of the reservoir. This is …