Digital Commons Network^™

The Design Of A Molten Fueled, Vortex Reactor, For Use As A Rocket Propulsion Device, Robert Philip Schmitt

Masters Theses

"The purpose of this investigation is to design a nuclear reactor which can be used as a rocket propulsion device. The reactor investigated is fueled with a molten uranium-bismuth alloy and utilizes a two phase vortex flow principle. Hydrogen is employed as a coolant and rocket propellant. The hydrogen is heated directly by the fuel thus eliminating the need for heat exchangers. The major part of the investigation consists of a two group neutron diffusion study to show the operational feasibility of this type of reactor and to obtain an optimum design. the study shows that this type of reactor …

From Romance To Realism: A Study Of Sinclair Lewis's Early Novels Culminating In Main Street, Sylvia Walborn

Masters Theses

No abstract provided.

Effect Of Nitrogen Fertilization On The Establishment, Density, And Strength Of Merion Kentucky Bluegrass Sod Grown On A Mineral Soil, Kent W. Kurtz

Masters Theses

No abstract provided.

The Developing Image Of The Soviet Union: A Case Study Of Soviet Participation In Unesco, 1946 To 1967, Jerry J. Morris

Masters Theses

No abstract provided.

Constant Elements Of Soviet Inspection Proposals For Disarmament, Philip Clifton Lewis

Masters Theses

No abstract provided.

A Method For The Calculation Of The Electric Microfield Distribution In A System Of Charged Hard Spheres, Ronald M. Flegal

Masters Theses

No abstract provided.

The Application Of Behavioral Principles To The Modification Of An Acting Out Child's Classroom Behavior In A Regular Classroom, Marjorie M. Mcarthur

Masters Theses

No abstract provided.

The Development And Use Of A Double Beam Photoelectric Polarimeter For The Study Of The Faraday Effect, John Norman Rowe

Masters Theses

No abstract provided.

A Study Of Aquisition Of Stimulus Matching, Stanley George Smith

Masters Theses

No abstract provided.

Development Of A Method For Measuring Magneto-Optical Rotatory Dispersion, Donald K. Loving

Masters Theses

No abstract provided.

Stress Analysis Of A Wall Footing Subjected To External Vertical Loads And Overturning Moments By The Finite Element Method, Adil Godiwalla

Masters Theses

"This investigation pertains to the stress analysis by the finite element method of a wall footing subjected to external vertical loads and external overturning moments. This problem has been reduced to a two-dimensional stress analysis problem by taking a unit length of the wall. A rectangular plate - element is used throughout this investigation. The development of the matrix equations is shown and the solution is performed by digital computer. Stresses in the horizontal direction show essentially linear variation which is in agreement with simple structural theory, while stresses in the vertical direction show severe perturbation near the column load. …

Vapor Pressure And Evaporation Coefficient Of Cadmium Oxide, R. Tom Coyle Jr.

Masters Theses

"Knudsen effusion experiments were carried out on CdO in fused silica crucibles at temperatures of 918°K, 1008°K with orifice areas from 2.742x10^-3 cm² to 30.52x10^-2 cm². The experiments were made in a molybdenum-wire, resistance-heated vacuum furnace. Several orifice areas were used at each temperature and reciprocal pressure versus orifice area plots were made. These plots yielded an upper limit to the evaporation coefficient of. 4.15x10^-2. An equilibrium constant for the vaporization reaction

CdO(s) = Cd(g) + 1/20₂ (g)

of

log Keq = 11.12 - 1.952x10⁴/T.

was obtained. Second and third …

Computer Solutions To Depletion Drive Hydrocarbon Systems, Tu Kao Chen

Masters Theses

"Three computer analyses of oil production by depletion drive have been developed. These analyses, Tarner's method of depletion drive oil production prediction, depletion drive performance productions of Schilthuis, and depletion drive calculations by a finite difference material balance, have been programmed for computers having Fortran IV compilers and a minimum of 40 K bytes of core storage capacity. Modifications have been incorporated in the last two techniques for (a) constant volume injection of produced gas, (b) the presence of a gas cap, (c) gas-cap injection of produced gas volumes, (d) varying water encroachment and production, and/or, (e) varying sweep efficiencies …

Gap-Graded Gravel For Asphaltic Paving Mixtures, Ernest Harrington Martin

Masters Theses

"The objective of this investigation was to determine if naturally occurring gap-graded gravel can produce asphaltic mixtures meeting minimum requirements for satisfactory pavement behavior.

Ten gap-graded mixes were blended by eliminating certain intermediate sized fractions or combination of fractions from the gradation of a control mix. The weight of the fractions eliminated was distributed to either the coarser or finer aggregate fractions.

All specimens were prepared and tested in strict accordance with procedures set forth in ASTM Designation D1559, "Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus."

The physical properties compared and analyzed were (1) unit weight, (2) …

Dynamic Response Of A Simply Supported Beam To An Accelerating Point Load, Joseph Victor Cusumano

Masters Theses

"An analysis based on linear theory is presented for determining the dynamic response of a simply supported beam on an elastic foundation acted upon by a moving time dependent point force with axial forces included. This thesis extends the present theory to include an analysis of a point force accelerating uniformly across the beam. In particular, it is shown that the customary resonance conditions which are prevalent for a point force moving with uniform velocity no longer exist for the case of a point force accelerating uniformly across the beam.

The basic problem and its solution are presented for a …

Stresses In A Thick Spherical Shell, David Wayne Moore

Masters Theses

"This thesis reports a method to evaluate the stresses in a segment of a thick spherical shell. In the numerical examples loads due to thermal expansion as the shell is constrained at the free edge and a dead load acting vertically downward were considered for a shell assumed pinned but free to rotate and for a shell assumed completely fixed at the edge. A concrete shell was specifically studied but the method would also apply to a shell of any homogeneous, isotropic material"--Abstract, page i.

Convective Heat Transfer In Small Cylindrical Enclosures Heated From Below, Donald Wayne Land

Masters Theses

"Free convection in enclosed air spaces is often of prime importance in the design and analysis of panels utilizing the insulating properties of air and other gases. Previous investigations were performed on very thin air layers.

This thesis presents the results of an experimental investigation to determine the heat transfer by convection and conduction through air layers with relative sizes in terms of length/diameter ratios of one-fourth to one.

Eight cylindrical samples were tested. Four had inside diameters of 2.0 inches, and the others were 2.75 inches in diameter. Heat was transferred across the air layers by both conduction and …

Foreign And American Students Opinions Of Social, Political And Religious Attitudes In The American Culture, Robert K. Luther

Masters Theses

No abstract provided.

A Survey Of Entry Jobs And Entry Requirements In Primary Metal And Fabricated Metal Firms In Rock Falls And Sterling, Illinois, E. Kenton Peak

Masters Theses

No abstract provided.

The Design, Development, And Manufacture Of A Tool Grinding Fixture, Lawrence Carrell Jr.

Masters Theses

No abstract provided by author.

The Truman-Macarthur Controversy -- A Reappraisal, Ronald Lee Walker

Masters Theses

No abstract provided.

A Comparative Study Of The Concept Of Man As Revealed In The Works Of Certain Contemporary Painters, Larry S. Barnfield

Masters Theses

No abstract provided.

A Ten Year Educational Plan For Paris Union District #95, Paris, Illinois, Joseph A. Doglio

Masters Theses

No abstract provided.

A Comparison Of Strength Properties Of Heat Treated Aisi 1065 Steels At High Strength Levels, Robert Lowell Hollenbeck

Masters Theses

"Six AISI C 1065 steels were heat treated and tensile tested in order to evaluate their ductility at high strength levels. Heat treating and tensile testing procedures were developed for use working with these steels at tensile strengths of 300,000 psi and higher. The austenitizing procedure in the hardening operation was found to affect the strength and ductility of the high strength samples. Rapidly heating to the austenitizing temperature followed by an immediate quench produced better properties than slow heating followed by a soaking period before the quench. However, it was concluded that the carbon contents of the steels studied …

A Determination Of The Rate Of Evaporation Of Zinc At Atmospheric Pressure., Yu Ming Su

Masters Theses

"Measurements of evaporation rates of zinc in three different residual gases, e.g., argon, carbon monoxide, and hydrogen at one atmosphere pressure, were made. It was found that the rate of evaporation of zinc in one atmosphere of argon was almost the same as that in carbon monoxide, while the rate in hydrogen was almost twice the rate in argon or carbon monoxide. Measurements of evaporation rate of zinc in one atmosphere of argon-oxygen mixtures were also made. The evaporation rate was considerably reduced because the formation of the oxide film retards the zinc vapor escaping from the evaporating surface"--Abstract, page …

Film Boiling From Horizontal Plates With Low Thermal Capacity, K. M. Ragsdell

Masters Theses

"The object of this investigation was to obtain data for saturated film pool boiling from a low thermal capacity flat plate at atmospheric pressure. A test plate, constructed from resistance strip, was placed horizontally in a pool of liquid, and was heated electrically. Refrigerant-11 and nitrogen were used as the boiling liquids. Heat transfer results were obtained in both fluids over a temperature range of approximately 1200F⁰ (400-1600⁰F). Surface size, roughness and orientation effects were observed for flat horizontal heated surfaces with one dimension near the most dangerous wavelength. No surface material effect was observed. Excellent correlation of the data …

The Design Of A Drum Memory System, Frederick W. Lynch

Masters Theses

"Three methods for obtaining an auxiliary memory for an SCC-650 (Scientific Control Corporation) digital computer are presented. A logic design is then developed on the basis of using the drum and write circuits from an available IBM-650 digital computer and constructing the remaining logic functions. The results of the logic design are the transfer equations necessary to implement the memory system"--Abstract, page ii.

Shutdown Reactivity Worth Of Reactor Control Rods By A Subcritical Multiplication Method, Leslie Roger Conner

Masters Theses

"Two modified subcritical multiplication methods for measuring the reactivity worth of control elements were developed and investigated. The first involved the calibration of a subcritical count interval by the asymptotic period method. The second involved the calibration of a subcritical count interval by a rod interchange with the reactor regulating rod which had previously been calibrated by the asymptotic period method. The accuracy of these methods is relatively poor. this inaccuracy is due to shadowing effects and to the spatial harmonics which exist in the core. An investigation of the spatial harmonics to determine the best location for the neutron …

The Design And Construction Of An Apparatus For The Plane Wave Analysis Of Mufflers, Stephen Philip Buckley

Masters Theses

"In the following report, a method for evaluating the attenuation characteristics of a general muffler as well as the design, construction and use of the associated apparatus are described. The method combines accepted plane wave theory and experimental techniques into a relatively straightforward approach to the analysis of acoustic filters. Equations are developed to cover the frequency range between 300 and 4000 cycles per second. Deviations from these equations extend the use of the equipment to low frequencies without the need for unduly long and cumbersome apparatus. This method, which may be called the standing wave method, utilizes a standing …

Some Effects Of Nickel On The Microbial Population Of Activated Sludge, Virgil Eugene Carr

Masters Theses

"The purpose of this investigation was to study the effects of nickel on the microbial population of activated sludge, to establish a relationship between effluent quality and changes in microbial population, and to determine the fate of nickel applied. Five one liter fill and draw activated sludge units were fed settled domestic sewage and received constant daily nickel doses of 1-10 mg/l, and a 50 mg/l slug dose applied after 27-30 days of operation. The parameters used were the chemical oxygen demand (COD) of the effluent and membrane filtered effluent, mixed liquor and effluent total suspended solids, mixed liquor volatile …