Digital Commons Network^™

Registration And Segmentation Of Multimodality Images For Post Processing Of Skeleton In Preclinical Oncology Studies, Vineeth Radhakrishnan

Masters Theses

Advancements in medical imaging techniques provide biomedical researchers with quality anatomical and functional information inside preclinical subjects in the fields of cancer, osteopathic, cardiovascular, and neurodegenerative research. The throughput of the preclinical imaging studies is a critical factor which determines the pace of small animal medical research. The time involved in manual analysis of large amount of imaging data prior to data interpretation by the researcher, limits the number of studies in a time frame.

In the proposed solution, an automated image segmentation method was used to segment individual vertebrae in mice. Individual vertebrae of MOBY atlas were manually segmented …

Internal Fault Location In Transformer Windings, Samir Yehya Abed-Alkareem Alzekri

Masters Theses

Power transformers are one of the most important components in electrical power systems. During their lifetime they are exposed to various electrical faults which are originated from transient overvoltages, electromagnetic forces due to over-currents, ageing, etc.

Internal winding faults are among the most common causes of transformer failure. Once a fault occurs, a fast an efficient method for its detection and location is required to avoid further delays in the network operation. This paper introduces a simple method for the location of internal winding faults. This method is based on time domain terminal measurements of wave propagation along the winding. …

Analysis Of Pedestrian And Bicycle Crashes In Michigan, Ahmed Abbas Ghubin Al-Zubaidi

Masters Theses

Vulnerable road users such as pedestrian and bicyclists are more likely to sustain a severe injury when they are involved in a crash with motor vehicles. Identifying the causes of crashes involving pedestrians and bicyclists is essential to reducing the number and the severity of such crashes. This study identified the causes and risk behaviors associated with pedestrian and bicycle crashes in Michigan by reviewing selected individual crash report (i.e., UD-10). Crash reports for all pedestrian and bicycle fatal crashes (K) and a sample of incapacitating injury crashes (A) from 2010 to 2014 were reviewed and typed individually using the …

The Decomposition Of Hydroxylammonium Nitrate Under Vacuum Conditions, Gregory A. Neff

Masters Theses

This research investigates the decomposition of the ionic liquid: hydroxylammonium nitrate (HAN), under vacuum conditions. All research was conducted at the Aerospace Laboratory for Plasma Experiments (ALPE) at Western Michigan University. Hydroxylammonium nitrate solution 24% wt. in H2O was used consistently throughout this research. A variety of temperatures and pressures ranging from 23°C to 645°C and 6E-3 Torr to 4 Torr, respectively, were used to decompose HAN. The primary gaseous species resulting from these decomposition conditions are N2O, NO, and trace amounts of NO2. The formation of H2O, and N2 is conditional on the experimental conditions, and the formation of …

Lnfluence Of Persulfate On Solidification/Stabilization Characteristics Of Iss Treatment, Jeffrey M. Hudson

Masters Theses

Two environmental remediation technologies that lend themselves well to being combined in a single application are In Situ Chemical Oxidation (ISCO) using activated persulfate (PS), and In Situ Stabilization (ISS). Persulfate can be activated by increasing the pH to 10.5 and/or increasing temperatures to 30ºC. Many common ISS amendments increase temperature to 30°C and/or pH to 10.5 when in contact with soil water. Laboratory experiments were conducted with various soils to determine the ability of eight ISS amendments to activate persulfate. All eight ISS amendments activated persulfate. This work also showed that the relative contribution of heat vs. alkaline activation …

Model Based Vehicle Simulation For Electrically Actuated Transmission Test Cells, Kenneth L. Gruel

Masters Theses

The Eaton Vehicle Group is responsible for the development of a large family of automotive products, including manual and automated manual transmissions for light, medium, and heavy duty vehicles. To further expand the transmission testing capabilities at Vehicle Group headquarters, the Vehicle Simulator system was developed and integrated into an existing motor-based test cell. System development time and cost were reduced by leveraging readily available vehicle models and real-time hardware. The Vehicle Simulator system allows a user to control the speed and torque settings of the test cell motors in manual mode, or switch the motors to vehicle emulation mode. …

A Parameterized Implementation Of A Hybrid Fuzzy Boolean Finite State Machine Using An Fpga, Sean T. Fuller

Masters Theses

A fuzzy system based on the extended Hybrid Fuzzy Boolean Finite State Machine (HFBFSM) model is designed and implemented in a Xilinx Zynq® all programmable System on Chip (SoC). The system allows for a single dominant crisp state and multiple non-dominant states to be activated simultaneously. A method is proposed to calculate the degree of membership of non-dominant states, β, by the distance of defuzzified fuzzy inputs to state transition trigger mechanisms.

The HFB-FSM is was realized by the author using custom logic written in VHDL (Very High Speed Integrated Circuit (VHSIC) Hardware Description Language) in the Programmable Logic (PL) …

Environmental Applications Of Chromatography-Mass Spectrometry, Wisam Abdulabbas Flayyih Al Isawi

Masters Theses

Gas chromatography-mass spectrometry (GC-MS) and liquid chromatographymass spectrometry (LC-MS) are powerful analytical techniques that combine the separation power in a stationary phase with the detection power of mass spectrometry. GCMS and LC-MS have gained dominant positions in identifying and quantifying different analyte species due to their high selectivity, high sensitivity, and high reproducibility.

My research utilizes the analytical power of LC-MS and GC-MS to address two environmental issues: 1) Identification of biodegradation products of the ionic liquid 1- butyl-3-methylimidazolium chloride (BMIMCl) by an activated sludge microbial community using LC-MS and 2) identification and quantification of polycyclic aromatic hydrocarbons (PAHs) in …

Comprehensive Evaluation Of The Effectiveness Of Pedestrian Countdown Signals On Road Users In Michigan, Richard Atta Boateng

Masters Theses

Pedestrian countdown signals (PCSs) are specifically designed to improve pedestrian safety at intersections. Installation of these devices may be with push buttons or without push buttons. Studies have shown that intersections where PCSs with push buttons have been installed have recorded reduction in pedestrian violation as well as reduction in the number of pedestrians trapped in the roadway. Studies have also shown that PCSs may be used by approaching drivers in the same way as other traffic signal anticipation devices such as green signal countdown (GSC). While other signal anticipation devices have been found to benefit drivers, a very limited …

Evaluation Of An Alternative Natural Surfactant For Non Aqueous Phase Liquid Remediation, Brian A. Beach

Masters Theses

Applications of surfactant technology in the environmental remediation industry can greatly enhance the success of non-aqueous phase liquid (NAPL) remediation. Saponins derived from the bark of the Quillaja soapbark tree were evaluated as an alternative natural surfactant. Properties including the critical micelle concentration, emulsion kinetics and the solubilization enhancement of sixteen PAHs (polycyclic aromatic hydrocarbons) were measured. The critical micelle concentration (CMC) for Quillaja saponin was found to be 60 mg/L. Soil contaminated with NAPL from a former manufactured gas plant was used to evaluate saponin’s ability to enhance the solubilization of PAHs commonly found in NAPL. Although solubilization enhancement …

Developing Standard Procedures For Structural Aspects Of Slide-In Bridges In Accelerated Bridge Construction (Abc), Ozan Utku Ridvanoglu

Masters Theses

Slide-in bridge construction (SIBC) is a special method especially used to replace an existing bridge with the minimum duration road closure. In this method, new bridge superstructure is built next to the existing one and it is slid to its final position after demolishing the existing one. Applied implementations of SIBC show that several complications are experienced during bridge slide related with surface interaction. There is a need to evaluate the structural components of SIBC to develop suggestions. In this research, structural components of SIBC were investigated. The research dealt with completed SIBC implementations and numerical modelling of the slide …

Application Of Electrospray Ionization Mass Spectrometry For Ionic Liquids And Their Biodegradation Products, Sepideh Rahbarirad

Masters Theses

Ionic liquids (ILs) are organic salts with unique physico-chemical properties and are used as green alternatives to volatile organic solvents. ESI-MS is a sensitive technique to detect these stable, permanent ions. My research focused on (1) Identification of biodegradation products of ionic liquids and (2) Multiplexed tandem MS by modulation of ionization efficiency.

Studies, have demonstrated that ILs are toxic to the environment, which makes their biodegradability an important consideration. In this work, metabolites generated during the biodegradation of 1-butyl-3-methylimidazolium chloride (BMIM), a degradation resistant and commonly used ionic liquid, are identified using high performance liquid chromatography-mass spectrometry (LC-MS).

Multiplexed …

Cyanomargarita Gen. Nov. (Nostocales, Cyanobacteria): Convergent Evolution Resulting In A Cryptic Genus, Sergey Shalygin

Masters Theses

Two populations of Rivularia-like cyanobacteria were isolated from ecologically diverse and biogeographically distant sites. One population was from an unpolluted stream in the Kola Peninsula of Russia, whereas the other was from a wet wall in the Grand Staircase-Escalante National Monument, a desert park-land in Utah. Though both were virtually indistinguishable from Rivularia in field and cultured material, they were both phylogenetically distant from Rivularia and the Rivulariaceae based on both 16S rRNA and rbcLX phylogenies. The new putative cryptic genus Cyanomargarita, with proposed type species C. melechinii sp. nov., and additional putative species C. calcarea are described herein. A …

Evaluation Of Highly Viscous Polymeric Fluids And Recrosslinked Degraded Gel, Danlu Zhang

Masters Theses

”This work presents the evaluations of two products. One can be used for hydraulic fracturing to achieve viscosity stable under high shear rate, and the other is potential to be applied to enhance oil recovery from mature oilfield.

The first experiment is to synthesize and evaluate a new polymeric fracturing fluid that can resist high shear rate of 511^-1 with favorable viscosity. Zirconium crosslinked fracturing fluids are lack of self-healing ability after shearing, and the difficulties still exist in maintaining viscous with lower polymer content exposed to high shearing conditions, therefore, the research is trying to develop a new …

Synthesis And Photonic Sintering Of Bioresorbable Zinc Nanoparticle Ink For Transient Electronics Manufacturing, Bikram K. Mahajan

Masters Theses

"Zinc is an essential 'trace element' that supports immune systems, and is required for DNA synthesis, cell division, and protein synthesis. Zinc nanoparticles (Zn NP) has antibacterial properties and potential to be used in biodegradable printed electronics devices. The research presented here is about the synthesis of Zn NP and their potential use in transient electronics devices. In Paper 1, a technique of room temperature synthesis of Zn NP is reported using ball milling. Controlled amount of PVP was mixed in the solvent to stabilize the Zn particles and minimize cold welding during milling. The size of the produced Zn …

Laser Sintering And Aerosol Printing Of Conductive Nanoparticles, Mahati Guntupalli

Masters Theses

"Fabrication and printing of nanoparticles is an essential step in the manufacturing of low cost- high efficiency electronic devices. High material costs of noble metal particles necessitates the investigation for a potential substituent. Conventional methods of manufacturing are time consuming and uneconomical, thus intense research is being done to employ new methods for cost, time and space effective manufacturing process.

The first part of the thesis presents the fabrication of Copper nanoparticles. As an economical substituent for noble metal nanoparticles, Copper nanoparticles satisfy various properties as conductive inks, simultaneously suffering from the vital problem of oxidation. The acceleration effects of …

Shear Behavior Of Reinforced Fly Ash-Based Geopolymer Concrete, Noor S. Yacob

Masters Theses

"The geopolymerisation of aluminosilicate materials such as fly ash has been a radical change in construction material's chemistry and composition, compared to the portland cement-based concrete calcium silicate-hydrate chemistry. The adoption of fly ash in concrete industry is a good use of by-product ashes to reduce emissions of the greenhouse gas implicitly. However, in this research, the replacement of portland cement by fly ash is 100%, which makes it a zero-cement concrete with no proprietary chemical additives.

Geopolymer concrete (GC) is a revolutionary synthetic material that combines sustainability and high engineering properties, and it is relatively cost-effective compared to portland …

Biodegradable Electronic And Optical Devices Toward Temporary Implants, Md Shihab Adnan

Masters Theses

"Implantable biomedical devices have a high potential to revolutionize health care technologies in near future. Implantable devices can be classified as permanent prosthetic devices such as pacemakers or nerve stimulants and temporary devices for intermediate monitoring and control scenario which are still in research phase. In contrast to permanent device, temporary implants lose functionality and become unnecessary after intended operational lifetime which may pose serious electromagnetic and biomedical safety concern, latent complications at the implanted sites and possible ethical issues if not removed from body by an additional surgical operation.

The first paper of this thesis focuses on exploring the …

Mitigation Of Glass Weave Skew Using A Combination Of Low Dk Spread Glass, Multi-Ply Dielectric And Routing Direction, Kartheek Nalla

Masters Theses

"As the data rates increase into the multi-gigabit range, the bit periods fall in the range of few tens of picoseconds. At above few Gbps, it becomes very important to reduce skew between differential pairs as it can adversely impact the signal eye and thereby increase bit error rate. The goal of this study is to mitigate the skew contributed by woven glass fabric of PCB dielectrics.

The glass weave skew between differential pairs in a PCB occurs due to the difference in dielectric constants (DK) of glass and resin. This thesis aims to mitigate the skew by reducing the …

A Comprehensive Study Of Lost Circulation With Application In The South Rumaila Field, Iraq, Abo Taleb Tuama Al-Hameedi

Masters Theses

“Drilling mud losses and problems associated with lost circulation while drilling account for a major expense in drilling oil and gas wells. By industry estimates, more than 2 billion USD is spent annually to combat and mitigate this problem (Ali et al., 2015).

The South Rumaila field in Iraq is one of the largest oilfields in the world. Wells drilled in this field are highly susceptible to lost circulation problems when drilling through the Dammam, Hartha and Shuaiba formations. Lost circulation events range from seepage losses to complete loss of the borehole and are a critical issue in field development. …

Behavior Of Hollow-Core Composite Columns Under Torsion Loading, Sujith Anumolu

Masters Theses

"The effect of torsional loads could be significant along with axial and flexural loads on bridge columns during earthquake excitations. The present study presents the torsional behavior of hollow-core steel-concrete-steel columns (HC-SCS) and hollow-core fiber reinforced polymer-concrete-steel columns (HC-FCS). The HC-SCS comprises of sandwiched concrete shell between two steel tubes whereas in HC-FCS column, the outer steel tube of HC-SCS column was replaced by the FRP tube. Both columns have stay-in place permanent form-work to the concrete shell in the form of outer and inner tubes. The steel tubes serve as longitudinal and shear reinforcement to the column. Finite element …

Paleogeogra Detrital Zircon Geochronology Of Upper Cambrian To Lower Mississippian Siliciclastic Strata Of The Ozark Dome And Vicinity, Bing Li

Masters Theses

"Siliciclastic strata exposed in the Ozark Dome provide Late Cambrian to Late Cretaceous snapshots of an evolving paleogeology and regional to far-field tectonic events. U-Pb ages of detrital zircons from the arkosic base of the Upper Cambrian Lamotte Formation reflect first cycle derivation from the adjacent ca. 1.31-1.48 Ga Granite-Rhyolite province, with subsidiary input from ca. 1.6-1.7 Ga Mazatzal basement. Feldspathic arenites near the top of the Lamotte Sandstone also contain significant quantities of detrital zircon grains of these ages, with additional peaks centered at ca. 2.7 and ca. 1.1 Ga, signaling the onset of extra-regional detrital input most likely …

Late Ordovician Tectonism In The North American Midcontinent: Constraints From U-Pb Detrital Zircon Geochronology, Daniel Nathan Meehan I

Masters Theses

"Numerous sandstone filled depressions hosted in upper Cambrian to Middle Ordovociain dolostones in south-central Missouri have historically been identified as Pennsylvanian paleokarst structures. U-Pb detrital zircon geochronology is at odds the time of formation and sedimentological evidence challenges their classification. "Filled sink" deposits yield primary zircon age populations of 2.8-2.6 Ga (~50% of all analyzed grains), 1.2-1.1 Ga (~25%), 1.8-1.6 Ga (~15%) and 1.5-1.3 Ga (~10%). These zircon populations most likely originated from the Superior Craton and Midcontinent Rift and/or Grenville orogen, respectively. The Warrensburg and Moberly channel-fill sandstones of central Missouri were identified as good candidates for Pennsylvanian aged …

2d Seismic Data And Gas Chimney Interpretation In The South Taranaki Graben, New Zealand, Taqi Talib Alzaki

Masters Theses

"The Taranaki Basin is one of the major oil and gas producing basins offshore New Zealand. The study area covers an area of 10,000 km² in the basin, and includes 171 2D seismic lines and six wells, which are provided by the New Zealand Petroleum & Minerals. Some previous studies refer to the study area as the South Taranaki Graben.

This thesis provides detailed mapping and interpreted subsurface stratigraphy and structure of five horizons, i.e. basement top, Pakawau Group top, Kapuni Group top, Wai-iti Group top, and seafloor. It undertakes studies of the relation between the basin evolution, faults, …

Effect Of Cooperation On Players' Immersion And Enjoyment, Lakshmi Sushma Daggubati

Masters Theses

"This research examines the effect of cooperative versus non-cooperative game play on immersion and enjoyment in online games. It draws on the self-determination theory to generate the research hypotheses and explain the observed phenomenon. A within-subject experimental design (N=38) was used to evaluate the effects of cooperative versus non-cooperative game play on enjoyment and immersion by having participants play in a manipulated game mode in a controlled gaming environment. The participants' subjective responses were assessed to understand their user experience in cooperative and non-cooperative gaming environments. The results suggest that both immersion and enjoyment were significantly enhanced in cooperative game …

Aspen Simulation Of Oil Shale And Biomass Process, Anand Alembath

Masters Theses

"This thesis focuses on design and analysis of two major chemical processes using computer simulation which performs a steady state computation. The objective is to design processes using Aspen simulation to establish optimum operating conditions by performing various simulation runs which are challenging to execute at lab scale.

Increasing energy needs and decline of global oil prices has shifted our focus on commercially developing unconventional and renewable resources. Commercialization of any process relies on developing a process model that identifies different process parameters by performing a steady state mass and heat balance. Aspen simulation is considered an effective process modeling …

Tracking Silver, Gold, And Titanium Dioxide Nanoparticles Through Drinking Water Systems By Single Particle - Inductively Coupled Plasma - Mass Spectrometry, Ariel Renee Donovan

Masters Theses

"Single particle (SP)-ICP-MS methods were developed to characterize and quantify Ti-containing, titanium dioxide, silver, and gold NP concentration, size, size distribution and dissolved metal element concentration in surface water and treated drinking water. The effectiveness of conventional drinking water treatments (including lime softening, alum coagulation, filtration, and disinfection) to remove NPs from surface water was evaluated using six-gang stirrer jar test simulations. Six-gang stirrers were used to simulate drinking water treatments including lime softening, alum coagulation, powdered activated carbon sorption, filtration, and disinfection by free chlorine. Lime softening effectively removed most nanoparticles added. Source and drinking waters from three large …

Phytoforensics Tools: The Degradation And Detection Of Chlorinated Solvents In Integrated Systems, Tommy J. Goodwin Jr.

Masters Theses

"Due to decades of mismanaged pollutants entering groundwater, subsurface pollution of various compounds has become a widespread challenge. Chlorinated solvents are the most common groundwater contaminants that persist in aquifers, and remediation of these wide-spread plumes is difficult. Bioremediation, permeable reactive barriers, and phytoremediation are remedial technologies that have been developed and applied to chlorinated solvents in groundwater systems. This study integrates these technologies in different combinations to demonstrate the remediation potential of this approach. Zerovalent iron (ZVI) and bioaugmentation with a Dehalococcoides sp. (DHC) culture were applied separately and in combination for degradation of perchloroethene (PCE). Salix pentandra were …

Caseload/Workload Study Of Speech Language Pathologists In Missouri Public Schools, Jinyu Du

Masters Theses

"A survey was distributed to speech-language pathologists (SLPs) in Missouri public schools to obtain statewide information regarding caseload number, workload related activities and SLPs' level job satisfaction on various aspects of their job. An online questionnaire was sent to school-based SLPs in Missouri to solicit factual information on average monthly caseload numbers, factors that impact caseload assignments and the percentage of time spent on various professional responsibilities and job satisfaction ratings. Results indicated that 24% of the respondents had caseloads that exceeded the maximum state regulated caseload number for SLPs. Respondents were also largely unaware of the maximum caseload regulation …

Experimental Evaluations Of Selected Sealants To Remediate Co₂ Leakage, Aaron Jeffrey Blue

Masters Theses

"Carbon Dioxide (CO₂) sequestration into porous and permeable brine-filled aquifers is seen as one of the most feasible solutions for reducing the amount of greenhouse gases released into the atmosphere from coal-fired power plants. To safely store the CO₂, it must be trapped under an impermeable rock acting as a seal. One of the concerns with CO₂ sequestration is the generation of new fractures or reopening of existing fractures caused by CO₂ injection in the sealing formation. This project evaluates the potential of sealing these fractures by injecting sealing materials into them. These sealing …