Digital Commons Network^™

Optimal Slotting In Hybrid Warehousing For Industry 4.0, Teng Yang

Masters Theses

In the era of Industry 4.0, the warehouse management system (WMS) employed by many firms prescribes hybrid storage, i.e., products with high turnover, called fast movers, are kept in random storage for a short time duration before being shifted to a dedicated storage area, while products with low turnover, called slow movers, remain in random storage. From dedicated storage, the products are dispatched to the customer. The challenge for managers is selecting the slot in dedicated storage to assign to each product while demand data change because of fluctuating market conditions; this problem is referred to as slotting in the …

Investigating The Dynamic Rating Method: Effects Of Flood Wave Geometry On Discharge Estimation, Daniel James Read

Masters Theses

Rating curves are a vital tool to convert from observed stage to discharge in streamflow monitoring. Most gaging sites utilize a simple rating curve, which assumes a monotonic relationship between stage and discharge. In most cases, this assumption is valid; however, dynamic effects of flood waves often cause significant error in discharge estimation for mildly sloped streams. The dynamic rating method utilizes a numerical solution of the St. Venant Equations applied to time series stage data to compute discharge. Within this method, there is a flood wave parameter called the flood wave factor. The researchers designed a formal computational model …

Validating A Low-Cost Radio Frequency Characterization Framework For Development-Grade Software-Defined Radios In Short-Duration Cubesat Missions, Thomas Wayne Francois

Masters Theses

Software-defined radios (SDRs) and CubeSat platforms have reduced the cost and complexity of space-based communication systems, enabling broader participation in satellite missions. While low-cost radio hardware is increasingly accessible, the ability to characterize and validate its performance remains constrained by the high cost and limited access to traditional RF test equipment. This disparity creates a challenge for small satellite development teams, which must characterize communication-system technical performance with limited access to laboratory-grade instrumentation.

This thesis presents a low-cost RF characterization framework for assessing key radio-frequency performance metrics using readily available hardware and measurement techniques. The approach integrates frequency translation, SDR-based …

Cervical Ligament Systems In Sauropod Dinosaurs: What Support Is There?, Audrey Rose Williams

Masters Theses

"Sauropod dinosaurs, such as Diplodocus, have been the subject of numerous hypotheses about what ligamentous structures could have lifted and supported their long necks. Because the supportive tissues rarely fossilize, palaeontologists rely on osteological correlates on the bone to infer their nature. Options for supportive cervical ligaments in sauropods are mammal-style nuchal ligaments, avian-style interlaminar elastic ligaments, reptilian-style supraspinal ligaments, or some combination thereof. This study tested for the presence of a mammal-style nuchal ligament via histological and micro-computed tomography of posterior cervical hemispinous processes of Apatosaurus and Diplodocus, in addition to examining gross morphological features of the cervical vertebrae …

Transformer-Based Language Models For Bitcoin Market Prediction And Interpretation, Erich Gozebina

Masters Theses

"In the context of a Master's thesis in applied mathematics, this work investigates compact transformer-based language models as an instrument for Bitcoin-related predictions and decision support. The work connects three topics: the structure of the Bitcoin system and its data, the mathematical and algorithmic foundations of deep autoregressive transformers, and the design of practical training pipelines for financial applications. On this foundation, a reproducible ETL pipeline for Bitcoin data is developed and two forecasting experiments are conducted with the compact language model nanochat. The first experiment approaches the prediction of next-day price movements through autoregressive next-token generation based on structured …

The Occurence Of Expansive Clay Soils In Illinois And Their Effects On Shallow Lightly Loaded Foundations, Greg James Gollaher

Masters Theses

"The damage caused to shallow foundations and slabs on grade by the shrink-swell activity of clay soils is well documented across the United States. There are local and national resources available that delineate areas that are problematic and areas that are not. These resources paint Illinois as an undemanding foundation environment. However, our experience differs from this. Our experience tells us that damage related to the shrink-swell activity of clay soils is widespread, and commonly severe causing not only cosmetic damage to structures and hard improvements but also affecting the serviceability and longevity of structures. My goal is to accurately …

Autonomous Navigation Development And On-Ground Validation For Satellite Rendezvous And Proximity Operations, Logan Banker

Masters Theses

Spacecraft rendezvous and docking are critical mission phases for various applications of spaceflight, including active debris removal (ADR) and in-orbit servicing, assembly, and manufacturing (ISAM). While previous missions utilized humans to perform rendezvous and docking, this style of mission greatly increases safety risks and cannot be implemented on a large scale. Autonomous servicing satellites provide a path towards scalable rendezvous and proximity operations (RPO) because these autonomous agents do not require human intervention. This work presents a lightweight convolutional neural network (CNN) for the navigation system of an agent which analyzes monocular images and predicts the target's position and orientation …

Wattage- And Composition-Dependent Ocular Surface Toxicity: An In Vitro Study On E-Cigarette Aerosol Exposure In Human Corneal Epithelial Cells, Tzu-Ling Lin

Masters Theses

As electronic cigarette consumption continues to escalate globally, its impact on non-respiratory mucosal surfaces, particularly the ocular surface, remains largely understudied. This study investigated the toxicological effects of e-cigarette aerosols using a human corneal epithelial cell (HCE-2) model. Our findings reveal that aerosol exposure induces a significant, dose-dependent reduction in cell viability, exacerbated by higher device wattage and specific flavor agents such as watermelon. Exposure was found to trigger intracellular oxidative stress and the activation of apoptotic pathways, leading to programmed cell death. Furthermore, the upregulation of proinflammatory cytokines suggests that vaping may predispose users to chronic inflammatory conditions of …

Developing Discharge Estimation Algorithm Using Low-Cost Velocity Sensor And Machine Learning, Barkha Gautam

Masters Theses

Accurate river discharge estimation is essential for flood forecasting, water resources management, and hydraulic decision-making; however, continuous discharge records are unavailable at many river locations. Traditional stage-discharge rating curves are widely used but their reliability may decrease when channel conditions change or flow conditions vary rapidly. This study develops and evaluates Long Short-Term Memory (LSTM) models for discharge prediction using 15-minute time-series data from river monitoring stations in Missouri. Two model configurations, a baseline stage-only model and an enhanced stage-plus-velocity model, are developed and evaluated independently at two river sites to determine whether the inclusion of surface velocity improves discharge …

Examination Of Laser Microwelding As A Technique For The Repair Of Steel Castings, Allan John Woldow

Masters Theses

"Metal castings have long been plagued with minor defects caused by various process and design conditions. Commonly, minor defects are not seen until after machining operations have been completed, and by the time they are identified, they cannot be salvaged in a manner that is structurally sound and does not have other detrimental effects on the product. Detrimental effects may include warping from high heat input in traditional welding, warping from reheat treatment, oxidation of machined surfaces, microstructural anomalies, and reduced mechanical properties. Micro laser welding has the potential to provide a solution to these issues by providing a low …

Aura-Visionpose: Creating Datasets For Vision-Based Pose Estimation, Mohanad Alameer

Masters Theses

"Spacecraft rendezvous is an integral part of many orbital missions, including active space debris removal (ADR) and in-orbit servicing, assembly, and manufacturing (ISAM). Traditionally, rendezvous missions rely mainly on manual ground-based control to perform rendezvous and docking. While this can be effective on an individual basis, it becomes less practical at scale. Autonomous vision-based methods can reduce reliance on human control, and may improve scalability, response time, and reduce the possibility of human error for both ADR and ISAM. This work lays the necessary groundwork for developing a machine learning (ML) model for autonomous rendezvous by creating a labeled image …

Design For Extrusion-Based Additive Manufacturing: Generation Of Guidelines For Ceramics With Comparison To Thermoplastics, Hollis Hervey Waites

Masters Theses

"Design for Additive Manufacturing (DfAM) has made much progress for polymer material extrusion processes (MEX-P), like Fused Deposition Modeling (FDM), but very little progress for ceramic MEX processes (MEX-C) like Direct Ink Writing (DIW). This thesis leverages MEX-P design guidelines to create an initial set of design guidelines for DIW. FDM and DIW processes and material properties are compared, and the effect of these factors on the differences in rules is discussed. Five design guidelines are identified as applying to all MEX. For three of these, an exact limit for DIW of alumina is studied: minimum corner radius in the …

Specialty Glass Fibers For Optical Applications, Theodore Carver Lewis

Masters Theses

"Fibers were draw from melts of a commercial Na-aluminosilicate for ion-exchange treatments. A process was developed to draw 100-meters of fiber with a diameter of 100±10m. The fibers were sectioned for ion exchange treatments. SEM analysis showed an ion penetration depth of 45um after 4 hours of ion exchange in a 400°C KNO3 salt bath. The pristine and ion-exchanged fibers were characterized by a two-point bend test in room temperature air with controlled relative humidity (RH) and faceplate velocities between 100 and 4000 μm/s to characterize fatigue effects. Pristine fibers tested in air (40% RH) at 4000 μm/s had failure …

Near-Field Scan Method For Radiated Susceptibility Analysis And The Design And Optimization Of A Miniaturized Spiral Antenna For Ultra-Wideband Applications, Mckennan Edward Starkey

Masters Theses

"The work presented in this thesis consists of two separate topics. The first topic is a new method for the characterization of radiated susceptibility of electronic devices, while the second topic is on antenna design. The first topic proposes an approach to experimentally determine locations within an electronic system that are well coupled to external far-field radiators. This method is performed by using a differential magnetic field probe to sweep across the target device while measuring the total radiated power (TRP) produced by the device in a mode stirred tent. Scan locations where the TRP is larger than the background …

Characterizing A Delay-Programmable Two-Color Femtosecond Light Source For Coherent Control Of Atomic Multi-Photon Ionization Processes, Mason Tanner Toombs

Masters Theses

"In this work a delay-programmable two-color femtosecond laser based on a chirped-seed noncollinear optical parametric amplifier was characterized. This design utilizes a titanium-sapphire crystal oscillator to generate broadband pulses of light spanning approximately 600-1200 nm, with a pulse duration of ~5 fs, repetition rate of 80 MHz, and pulse energy of ~2.5 nJ. An infrared portion of the light, spanning approximately 1020-1060 nm, is split off from the pulse and used to generate a pump beam. By dispersing the remaining seed beam and controlling the relative timing delay between the seed and the pump, tunable frequencies within the seed can …

Optical Fiber Eaf Refactory Lining Temperature Monitoring For Safety And Operating Efficiency, Manoj Kumar Pullagura

Masters Theses

"Electric arc furnace (EAF) sidewalls experience severe thermal, chemical, and mechanical loading, especially near burner and injector regions where refractory wear and water ingress from damaged cooling components pose safety risks. Conventional thermocouples and resistance temperature detectors provide reliable point measurements but lack the spatial resolution needed to capture steep gradients and localized anomalies. This research investigates embedded optical fiber sensors for high-resolution temperature monitoring of EAF refractory safety linings to support early water-leak detection and assessment of refractory thermal behavior. A combined Rayleigh backscattering-based optical frequency domain reflectometry (OFDR) and fiber Bragg grating (FBG) approach was evaluated through laboratory …

Castrip Process Technology: Non-Grain Oriented (Ngo) Si Steels Extension And Carbide-Free Bainitic (Cfb) For Flat Products, Naram Naidu Meesala

Masters Theses

"This research explores the development of advanced steel grades manufactured through Castrip® twin-roll thin strip casting technology, with particular attention to non-grain-oriented electrical Si-Steels (NGOES) and carbide-free bainitic (CFB) steels. The Castrip® process offers a near-net-shape route for producing thin steel strips, which greatly decreases the number of processing stages, lowers energy demand, and reduces carbon dioxide emissions when compared with traditional steel production methods.

In the NGOES part of the study, several industrial Fe–Si steel compositions were cold rolled to final thicknesses ranging from 0.35 mm to 0.15 mm. These materials were then exposed to short-duration continuous annealing at …

Structured Decomposition And Efficient Adaptation For Scientific Data Movement: From Transfer Concurrency To Genomic Data Acquisition, Rasman Mubtasim Swargo

Masters Theses

"The end-to-end performance of scientific data movement is increasingly limited not by raw network capacity but by whichever resource along the path is momentarily slowest, a bottleneck that no single static configuration can track. This thesis argues that the right response is to decompose each problem along the resource or workflow axis where bottlenecks vary, adapt only the genuinely dynamic control variables at runtime, and make that adaptation efficient through utility-guided or offline-learned control rather than expensive online search. The thesis develops this principle through four systems of widening scope. AutoMDT decomposes a transfer by operation, assigning separate concurrency levels …

Moth Assemblages Of Fort Leonard Wood, Missouri, Kimberly Anne Steese

Masters Theses

"Moths (Lepidoptera) are ecologically important insects that function as herbivores, pollinators, prey resources, and indicators of ecosystem integrity. Despite their ecological significance, moth communities in the Missouri Ozarks remain poorly documented, particularly within military-managed landscapes. This thesis examined patterns of moth diversity, assemblage structure, and environmental drivers at Fort Leonard Wood (FLW), Missouri, while also assessing the distribution and genetic diversity of species within the genus Papaipema.

Field surveys were conducted from 2019 through 2021 across prairie, savanna, forest, and restoration habitats at FLW using UV bucket traps, sheet trapping, and targeted larval surveys. Across all sampling efforts, 29,116 individual …

General Approach To Determining The Embodied Energy Of Refractory Products, Jacob A. Kerr

Masters Theses

"Refractories are an important group of engineered materials that are critical for sustaining life in the modern age. These products are key components in many industrial processes, such as the production of steel, cement, glass, aluminum, copper, lead, and many others. It is estimated that 50 million tons of refractory products are produced and used around the world every year. Of this, an estimated 28 million tons of spent refractory is generated after use, much of which ends up in landfills all over the globe. By utilizing embodied energy methodologies, a complete sum of energy inputs can be mapped throughout …

Robust Broadband Characterization Of Flexible Absorbers, Sheet Material, And Liquids Using A Coaxial Structure, Joseph Christopher Stecher

Masters Theses

Modern high-frequency measurement systems require reliable calibration and sample positioning to ensure measurement fidelity. This thesis presents three studies addressing practical limitations in broadband material parameter extraction and instrumentation.

The first study introduces a modified Nicolson–Ross–Weir (NRW) technique for flexible, compression-sensitive materials from 100 MHz to 18 GHz. Rigid 3D-printed spacers ensure precise sample positioning, and a T-matrix–based de-embedding procedure removes spacer effects. Validation using microstrip measurements and full-wave simulation confirms accurate permittivity extraction across compression levels.

The second study extends NRW to sheet materials enabling accurate material characterization. Independent validation using toroidal inductors with leakage correction and parallel-plate capacitors …

Empirical-Based Model Of Spatio-Temporal Errors, Godwin Naaba Ndaa

Masters Theses

This research develops an empirical model to characterize spatial-temporal InSAR errors and improve the accuracy of deformation time-series analysis. Using standardized Sentinel-1 HyP3 products and MintPy, the study quantifies how correlated noise affects velocity precision and validates the results against continuous GNSS velocities.

Residual velocities are near-Gaussian, with σ ~0.92–2.04 cm/yr and ~1 cm/yr on average. Variograms show power-law spatial structure with a non-zero nugget implicating troposphere and decorrelation while errors drop exponentially with more acquisitions; spatial uncertainty is strongly affected by unwrapping errors, coherence, and tropospheric noise, not simply troposphere.

A comparative assessment of on-demand cloud processing with other …

Assessment Of Simulation Software Used For Cubesat Gnc Verification And Validation By University Research Teams, Alexander Taiyo Newett

Masters Theses

As the growth in university satellite teams continues, along with the greater trend in the small satellite market, the need for a guidance, navigation, and control verification and validation pipeline suitable for these young and inexperienced teams becomes evident. Much of the mathematical theory and software implementation of GNC concepts are large hurdles for teams largely composed of undergraduate students.

Many software packages exist that can help these teams achieve GNC verification and validation. If the learning curves of these software packages can be overcome, new satellite teams have the opportunity to better build and test GNC algorithms that are …

Assessment And Comparison Of Selected Carbon Ablation Models In Hypersonic Free-Flight And Arc-Jet Conditions, Andrew Steven Heider

Masters Theses

Accurate prediction of ablative thermal protection system (TPS) performance is critical for hypersonic vehicle design. However, numerical prediction of ablation remains challenging because results are influenced by complex physics and the choice of surface chemistry model and assumptions made in material response calculations. The objective of this work is to evaluate several carbon ablation models and their implementation within modern computational fluid dynamics (CFD) codes. Numerical simulations were performed using NASA’s LAURA flow solver and the commercial CFD code ANSYS Fluent, which coupled Navier-Stokes with surface chemistry models describing carbon oxidation, nitridation, and sublimation reactions. Several reaction sets were considered, …

Public Preferences And Trade-Offs In Critical Mineral Mining Development In The United States, Bamidele Joseph Ajiga

Masters Theses

Rising demand for battery-critical minerals has increased U.S. mining efforts, but projects often face public opposition. There is limited work on how individuals in affected regions evaluate trade-offs between economic and environmental risks.

This research applies a discrete choice experiment to examine individual preferences for proposed battery-critical minerals mining projects in Missouri, Minnesota, and Idaho. 1908 respondents evaluated hypothetical mining projects defined by jobs, state tax revenue, the proportion of tailings reprocessed, groundwater impacts, and surface water impacts, under gold and silver versus battery-critical mineral framings.

Conditional and mixed logit models were used to assess the importance of attributes, demographic …

Calcium Based Carbon Negative Fillers And Additives: Effects On Hydration And Performance Of Low-Carbon Cement Systems, Smita Bhowmick Shithi

Masters Theses

Cement production is a major source of global CO₂ emissions creating an urgent need for carbon-negative fillers and functional additives that lower clinker use while maintaining cement performance. This thesis investigates the effects of organic mineral salts as fillers and additives on cement hydration, fresh properties, compressive strength and pore structure. In the first study, ordinary Portland cement (OPC) was partially replaced with calcium carbonate or calcium oxalate to enable a direct comparison under controlled particle size distribution (PSD). Rheology, flowability, hydration kinetics, phase evolution, mechanical performance and water absorption were evaluated. Calcium carbonate promoted early hydration through nucleation and …

The Turning Of The Years, Katie L. Smith Lopez

Masters Theses

This thesis explores the exquisite interplay of moments that matter in brief human interactions. The Critical Paper focuses on the contrasting literary theories of Reader-Response Criticism and Psychoanalytic Criticism, which illustrate the varying ways readers engage with written works. The Artist Statement provides insight into the origin story of the writer and the variety of influences that led to the lyrical field of writing. The Creative Manuscript features a substantial portion of the writer’s memoir. Titled “The Turning of the Years,” this memoir-style work is anchored by significant life events that occurred near the writer’s impactful birthdays. An undercurrent of …

Examination Of Sportscasters To Understand The Key Overlapping Traits And Skills Exhibited, Jason Prill

Masters Theses

The world of sportscasting is a growing and crowded field. Due to its appeal, the field itself has become competitive with a few select broadcasters holding the most coveted positions. These broadcasters have set themselves apart in their skills, leading to their placement at the pinnacle of the industry. However, a lack of research has presented a gap in the field on what skills are most dominant for successful sportscasters. As an understudied avenue, sportscasting often goes overlooked in traditional research due to its misnomer as a “fun” profession. The following presents an in-depth look at high-level sportscasters to find …

Hollywood, Ai, And The Moral Universe: An Analysis Of The Terminator And Battlestar Galactica, Lara Sumera Samms

Masters Theses

This thesis defends the argument that depictions of artificial intelligence in Hollywood film and television point to a moral universe. Films The Terminator (1984) and Terminator 2: Judgment Day (1991), as well as the television series Battlestar Galactica (2004-2009) are analyzed to find clues of moral facts. This research paper submits that these stories add weight to the moral argument and provide evidence that humans implicitly recognize a moral universe. Such acknowledgment of moral structures cannot be adequately explained within a secular framework such as utilitarianism or evolutionary ethics. However, the Christian worldview frames reality around the existence of God, …

An Axe To The Funny Bone: Curated Instability And Horror-Comedy Intersections In American Storytelling, Samantha Box

Masters Theses

Funny. Terrifying. Subversive.

Horror-Comedy twists and bites at the intersection of two incredibly reactive genres— with both Horror and Comedy being well known for the political and social discourses they embody and reinvent through story. While prevalent in American popular culture, scholarly analysis of this hybrid space barely exists beyond a small number of Film Studies investigations. Despite this lack, Horror-Comedy works continue to be successfully produced. This thesis unpacks the vibrant relationship between fear and laughter in contemporary American storytelling through Horror-Comedy, maintaining a focus on structural dynamics and the audience-disarming results of simultaneously applying horror and humor to …