Digital Commons Network^™

Prediction Of Crack Propagation In Zrb₂-Carbon Based Composites Using The Extended Finite Element Method, Leiren Danielle Jarvis

Masters Theses

“The ultra-high temperature ceramic, zirconium diboride (ZrB₂) has long been researched for applications in extreme environments. Its high strength (> 400 MPa) and thermal conductivity (> 100 W/m•K) make it a candidate for use in hypersonic fight, but a low fracture toughness (< 3 MPa•m^1/2) limits this use. In order to increase the fracture toughness without compromising the strength and thermal conductivity, experimental research has focused on the viability of engineered architectures using multiple materials to create a macrostructure. These architectures allow for the increase of fracture toughness thru crack deflection in the material.

Two architectures in particular, …

Influence Of Input Energy On Mechanical Properties Of Laser Powder Bed Fused Aisi 304l Stainless Steel, Tan Pan

Masters Theses

“Powder Bed Fusion process with selective laser melting technique is popularly adopted in additive manufacturing area on account of its layer by layer manufacturing fashion capable of fabricating components with complex internal and external geometries and structures. However, the process-property map is unique and vital for different materials and AM configurations used for fabrication. The process parameter is identified as a significant factor that heavily influences the properties and performances of the printed materials.

Current work aimed to extend the existing knowledge on Laser Powder Bed Fusion fabricated AISI 304L by accessing the influence of varying energy input on the …

Modeling And Control Of Cascaded Bridgeless Multilevel Rectifier Under Unbalanced Load Conditions, Sai Hemanth Kankanala

Masters Theses

“The goal of this project is to model and control a novel unidirectional cascaded multilevel bridgeless rectifier as an active front end in medium and high voltage applications. This topology has many advantages over a conventional cascaded H-bridge rectifier, such as lower implementation cost, higher reliability, and greater flexibility with similar power quality. The complete design process of the proposed converter is developed step by step in order to meet all the desired objectives. The steady-state mathematical model is used to develop a method for the voltage balancing of dc cells. Power factor analysis is discussed to mathematically derive requirements …

Microgel Placement And Plugging Performance In Sand Filled Fracture For Conformance Control, Baihua Lin

Masters Theses

“Preformed particle gels (PPG) has been widely applied for conformance control in heterogeneous reservoirs with fractures and super-K channels. As a plugging agent, PPG could plug the fractures or high permeability streaks and divert the displacing fluid into low permeability matrix. Many studies have been conducted to investigate the potential of PPGs as a water cut reduction and improved oil recovery agent using homogeneous sandpacks or heterogeneous core samples with man-made open fractures. However, no research has been carried out to understand how PPG injection and plugging performance will be changed if the fractures are filled with sands. Herein, the …

Inclusion Control In Steel Castings, Koushik Karthikeyan Balasubramanian

Masters Theses

“Non-metallic inclusions are mainly comprised of oxides, sulfides, and nitrides, and are formed in liquid steel during the melting and refining process, as a result of reoxidation, worn-out refractories, or entrained slag. The notch toughness of high strength steels is particularly susceptible to the type, number, size, and distribution of non-metallic inclusions. High manganese and aluminum austenitic steels, or Fe-Mn-Al steels, have gained much interest in the military and automotive sector because of their excellent combinations of high strength and toughness. However, these steels are subject to both oxide bifilms and aluminum nitride, AlN, inclusions which form during melting and …

Determining Variable Depth To Bedrock Using Ert And Masw: A Geophysical Investigation In St. Louis, Mo, Justin James Clinton

Masters Theses

“The research involves a geophysical study in the Maremec River Valley in St. Louis County, Missouri. The geophysical methods described in this paper can provide a relatively quick, inexpensive, and accurate means in investigating the lithologic characteristics of the subsurface. Method selection is ultimately dependent of the type of investigation and site-specific characteristics. In this investigation, Electrical Resistivity Tomography (ERT) data and Mutli-Channel Analysis of Surface Waves (MASW) data were acquired to image the bedrock beneath the Maremec River to an approximate depth of 110 ft or an elevation of 300 ft for a proposed wastewater tunnel. Two overlapping dipole-dipole …

Therapeutic Dna: Delivery And As A Delivery Vehicle, Natalie J. Holl

Masters Theses

"A review of gene delivery methods and gene editing methods, as well as original research utilizing DNA as a delivery vehicle is presented in the following thesis. Thousands of diseases have been linked to genes. Gene therapy, either delivering therapeutic genes or editing DNA bases, has arisen as a treatment option with the potential to cure diseases, rather than just ease symptoms. Genes and editing tools need to be delivered to cells for these therapies to be effective and many techniques have been developed to address the issue of delivery. Nonviral and viral methods have been used to deliver nucleic …

Aquatic Plants And Their Application To Successful Floating Treatment Wetlands, Katherine May Mazanec

Masters Theses

“This research aims to mitigate eutrophication of freshwater habitats affected by urban stormwater runoff. Two highly impacted urban ponds near the Missouri S&T campus in Rolla were the focus of this research on the application of floating treatment wetlands (FTWs). An FTW consists of a man-made floating mat that is planted with emergent or floating macrophytes. The plants grow on the mat and their roots extend into the water column below the mat. Plant tissues, especially roots in direct contact with the water, take up nutrients, act as biofilm growth sites, and may facilitate precipitation of nutrients. With urbanization, ponds …

Evaluation Of The Symbiotic Relation Between Endophyte And Poplar Trees Exposed To Landfill Leachate, Catalina Vega Hurtado

Masters Theses

“The contamination of soil and groundwater from leachate leakage from landfill has turned, nowadays, into a global public issue. One of the main concerns about this pollutant is the potential threat to human and ecosystem health. The current research studied endophyte bacteria in association with poplar trees (Populus sp.), as a method of bioremediation of landfill leachates. The objective of the project was to identify treatment strategies that may improve plant performance (survival rates, plant fitness, and degradation efficacy) with the purpose of being implemented in phytoremediation plots, aimed to intercept and treat landfill leachate, before the contamination of watershed. …

The Application Of Machine Learning Models In The Concussion Diagnosis Process, Sujit Subhash

Masters Theses

“Concussions represent a growing health concern and are challenging to diagnose and manage. Roughly four million concussions are diagnosed every year in the United States. Although research into the application of advanced metrics such as neuroimages and blood biomarkers has shown promise, they are yet to be implemented at a clinical level due to cost and reliability concerns. Therefore, concussion diagnosis is still reliant on clinical evaluations of symptoms, balance, and neurocognitive status and function. The lack of a universal threshold on these assessments makes the diagnosis process entirely reliant on a physician’s interpretation of these assessment scores. This study …

Nanodiamonds And Carbon Nano-Onions Ceramic Composites And Their Applications, Ibrahim Munkaila Abdullahi

Masters Theses

"Luminescent nanodiamonds are photostable non-blinking fluorescent biocompatible, non-toxic, functional Zable materials made from high-pressure high temperature (HPHT) microcrystalline diamonds. For long, the scientific community has been investigating for a clean, efficient and cost-effective technique to reduce the size of fluorescent microcrystalline diamond into nanodiamonds. Their color center, responsible for the fluorescent properties are crucial for their applications, including biomedical imaging, nano sensing, quantum computing etc, and therefore should not be affected significantly by the method of size reduction applied. A novel size reduction technique that is based on explosive fragmentation was developed and the corresponding fragmented diamonds obtained were characterized …

Quantifying Effects Of Sleep Deprivation On Cognitive Performance, Quang Nghia Le

Masters Theses

“The most commonly used metric for evaluating alertness and vigilance is the Psychomotor Vigilance Test (PVT), previous studies have indicated that alertness and vigilance can be affected by the lack of sleep as a function of sleep loss. This study explores methods to predict median psychomotor vigilance reaction times. The data used in this study comes from a series of tests and surveys conducted on volunteer students. The data set contains many potential predictors of PVT and one aspect of the study was to identify variables that are useful in prediction. The performances of various prediction methods that allow for …

Performance Evaluation Of Alsi10mg Fabricated By A Selective Laser Melting Process, David Michael Murphy

Masters Theses

“Selective laser melting is becoming a widely used additive manufacturing technique that melts metal powder in a layer by layer process in order to build a desired part or geometry. Like many additive processes, selective laser melting allows for fabrication of parts with complex geometries. In order to fabricate a fully dense part there are a number of variables to take into account including: powder characteristics, laser parameters, and environmental parameters. Each of these variables can affect the microstructure and thus the mechanical performance of an additively manufactured part. In this work, the aluminum alloy AlSi10Mg was investigated. AlSi10Mg is …

Strain Partitioning Across The Polochic-Motagua Fault System In Guatemala: Insight From Kinematic Modeling, Qiaoqi Sun

Masters Theses

”The Polochic-Motagua Fault System in Guatemala is the on-land segment of the sinistral transform plate boundary between the North American Plate and the Caribbean Plate. Three major seismically active strike-slip faults in this fault system pose significant earthquake threats to surrounding populated cities. The assessment of seismic hazard requires a better understanding of the kinematics of the fault system. GPS monitoring indicates that seventy-five percent of the ~20 mm/yr. plate motion is accommodated by the Motagua Fault and less than twenty-five percent is accommodated by the Polochic Fault. However, the Polochic Fault documents a lateral offset of ~132 ± 5 …

Mineral Compositions Of Meteorite Samples Alha 77005, Nwa 7397, Nwa 5480, And Ausson: Implications For Geodynamic Processes On Their Parent Bodies And Meteorite Reclassification, Kaylin Agnata Tunnell

Masters Theses

“This study investigates the major, minor, and trace element compositions of minerals from a series of meteorites which represent different stages of planetary evolution including two sample from Mars (ALHA 77005 and NWA 7397), one sample from Vesta (NWA 5480), and one ordinary chondrite (Ausson). The goal of this study is to investigate if petrogenetic tracers commonly employed to understand terrestrial samples can also be applied to extraterrestrial samples. The data presented here show that mineral trace element data allow for novel insight into the magmatic history of meteorite samples. For example, V/Sc and Fe/Mn ratios in olivine provide insight …

Development Of Amine-Functionalized Mesoporous Alumina For Radioiodine Removal From Water, Mansour Mohammed Alsalbokh

Masters Theses

“Radioactive materials have spread due to careless disposal and nuclear disasters. Some radionuclides can exist in an aqueous media, like radioactive iodine. As a result, in this work amine-functionalized mesoporous alumina was developed to adsorb radioactive iodine from the liquid phase. Bismuth was incorporated, using a wet impregnation method, to test it as a possible silver replacement. Amine grafting was used to functionalize the surface of the mesoporous alumina. All materials prepared in this work were characterized by N₂ physisorption, FTIR and TGA to determine the textural properties, surface functionality, and amine loading. The synthesized materials were tested for …

Mid-Infrared Chiral Metsurface Coupling With Molecular Vibration, Md Shamim Mahmud

Masters Theses

“The mid-infrared design of chiral metamaterial shows a tremendous absorption capability of infrared rays, and it has the significant application of circular dichroism based device development. Plasmon-phonon coupling is one of the application of metamaterial that provides a new path for tailoring the surface in the nanoscale, which is also applicable in molecules detection. It is possible to change the Plasmon-Phonon coupling strength not only through the chemical change of molecules but also by changing the metamaterial light-matter interaction property. So far, linearly polarized light shows the strong coupling between metamaterial and molecules. However, it is possible to observe strong …

Feasibility Study On Novel Fire-Resistant Coating Materials, Anyou Zhu

Masters Theses

“Over the past decades, wildfires in the United States have caused severe damage and property losses. The California Camp Fire in November 2018 caused 85 civilian fatalities and destroyed 18,793 structures. There is a need to enhance the fire resistance of structures and buildings. The primary purpose of this study was to develop innovative surface-bonded fire-resistant material that can be used as a wall coating with three primary features: (a) workability for application, (b) enough adhesion to the surface of the structure, (c) fire-resistant. This research developed mix designs of innovative fire-resistant coating materials including high-performance cement mortar (HPCM), geopolymer …

Combining Laser Aided Ablation And Polishing To Minimize Surface Roughness Of Additively Manufactured Aluminium Components, Sahil Bipinkumar Patel

Masters Theses

“The surface roughness of additively manufactured parts is much higher than the acceptable range for most applications, thus post-processing is needed to qualify these parts for use. Laser polishing can be used to bring the surface roughness in an admissible range, but if the initial roughness is very high then the energy density for the polishing process needs to be very high to achieve a significant reduction in roughness. This high energy density can produce many process defects. Also, laser polishing alone cannot get rid of high wavelength asperities. Any waviness in the part can be linked with initial waviness …

Principles For Starting A Song-Writing Ministry, Carson Ka Siu Li

Masters Theses

With the approval of Dr. Keith Currie and Dr. David Schmal, I have chosen to complete the Music & Worship Ministry Project as the Final Thesis for the Masters of Art in Music and Worship. The objective of the project is to produce an Extended Play Record (EP) that contains five original worship songs written specifically for this EP. The components of this project include: songwriting, arranging, performing, recording, and producing. This project will achieve two purposes: first, the songs in this EP are meant to be sung in my local church – Koinonia Evangelical Church (KEC); second, this project …

Design, Synthesis, And Characterization Of Chemical Tools To Study Peroxisomal Import, Jhalak N. Timilsena

Masters Theses

Peroxisomes are dynamic and interconnected single lipid membrane bound organelles found in the eukaryotic cells which are involved in various biochemical processes including the b-oxidation of very long chain and branched chain fatty acids, metabolism of reactive oxygen and nitrogen species, and reduction of hydrogen peroxide among others. These organelles are known to host numerous proteins and enzymes depending on the cellular environment. All of the proteins needed in the peroxisomes are encoded in the nucleus and synthesized in the cytosol which are then transported to the peroxisomes with the help of a sophisticated protein-transport machinery. Pex5 is one of …

Reprograming Neuronal Cells By Overexpression Of Fibroblast-Specific Transcription Factors, Abdulmohsen Alanazi

Masters Theses

In mammals, a complex system of regulatory signals distinguishes tissues, structures and functions. Combinations of transcription factors and co-factors regulate activation and repression of genes that result in cellular differentiation. Whole genome arrays allow the monitoring of genomic expression in specific tissues. Fibroblast microarray studies have shown candidate genes that may be involved in fibroblast identification, including genes that express transcription factors Prrx1, Snai2 and Twist1. A previous study showed that the Prrx1 and Snai2 could reactivate a fibroblast phenotype in hybrid cells that had lost fibroblast identity. Furthermore, overexpression of these factors in liver-derived cells strongly repressed liver gene …

Design And Comparison Of Unoptimized And Optimized Gray Code Multi-Level Systems, Shirly Adams Gamliel

Masters Theses

“As the conventional binary MOS-based VLSI technology is reaching limitations in chip area, speed, and power, new technologies are being researched. Some such technologies relate to multi-level logic design. This thesis explores the process and benefits of applying and optimizing multi-level design techniques to an existing Gray code binary system. Specifically, the multi-level system is designed using CoreMem technology and is optimized using Indira Dugganapally’s optimization techniques.

The first step is generating the n-bit binary and quaternary truth tables for an encoder’s Gray code output and additional desired data. Then, the data for each n-bit system is arranged in multi-level …

Decoupled Finite Element Methods For General Steady Two-Dimensional Boussinesq Equations, Lioba Boveleth

Masters Theses

"This work presents two kinds of decoupled finite element methods for the steady natural convection problem in two dimensions. Firstly, the standard Galerkin finite element method is derived in detail stating algorithms needed for the realization in MATLAB. A numerical example verifies the error convergence. Secondly, using iteration, the Boussinesq equations are decoupled into the Navier-Stokes equations and a parabolic problem. The resulting problems are solved either in parallel or sequentially. Finally, the same numerical example as before is used to confirm the convergence and analyze the methods in terms of iteration performance. In addition to a higher flexibility and …

Attack Detection And Mitigation In Mobile Robot Formations, Arnold Fernandes

Masters Theses

"A formation of cheap and agile robots can be deployed for space, mining, patrolling, search and rescue applications due to reduced system and mission cost, redundancy, improved system accuracy, reconfigurability, and structural flexibility. However, the performance of the formation can be altered by an adversary. Therefore, this thesis investigates the effect of adversarial inputs or attacks on a nonholonomic leader-follower-based robot formation and introduces novel detection and mitigation schemes.

First, an observer is designed for each robot in the formation in order to estimate its state vector and to compute the control law. Based on the healthy operation of the …

Analysis Of Energy Economy In Muon Catalyzed Fusion Considering External X-Ray Reactivation, Nishant Raghav Pillai

Masters Theses

"An analysis of the energy economy of a theoretical muon-catalyzed nuclear fusion system has been made by invoking the use of point kinetic equations, Monte Carlo radiation transport simulations, and from a review of existing literature on muon-catalyzed fusion. An external X-ray reactivation source is proposed as a novel way to increase the number of fusions per muon and thereby overcome the so-called alpha sticking problem that has long been considered the primary impediment to breakeven muon-catalyzed fusion power. Free electron lasers, synchrotrons and Wakefield accelerators are discussed as possible bright X-ray photon sources. The addition of an intense external …

Data Analytics Of Natural Gas Injection Enhanced Oil Recovery For Unconventional Reservoirs, Ali Waqar

Masters Theses

"Unconventional Enhanced Oil recovery, via the injection of natural gas has attracted great attention, as studies and projects have shown to be promising. An overview of pertinent studies has been carried out. Core Scale Laboratory Experiments, Core Scale Simulation, Field Scale simulation and pilot projects are analyzed. Data is collected for Core, Reservoir, Operational, and recovery information. Thereafter, Data analysis techniques are applied to identify data ranges, distributions, trends, relationships, and to eventually reach conclusions.

Huff and Puff injection is the preferred mode of injection, delivering most promising results for unconventional reservoirs. Across all the studies, with increase in amount …

Evaluation Of Eor Potential Of Low Salinity Polymer In Enhancing Heavy Oil Recovery On The Alaska North Slope, Shize Yin

Masters Theses

"Alaska's North Slope (ANS) contains vast amount of viscous oil resources that have not been extracted. This study focuses on the investigation over the potential shown by low-salinity polymer flooding in improving the recovery of ANS heavy oil through laboratory experiments.

At the beginning, coreflooding experiments were performed with silica sandpacks. The synergy between low-salinity water flooding and polymer flooding was proved, and the low-salinity polymer showed a better performance than the normal-salinity polymer. Further, the sandpacks prepared with formation sand from an oilfield on the ANS was then employed so as to simulate the reservoir condition. A series of …

Computer Vision Based Deep Learning Models For Cyber Physical Systems, Muhammad Monjurul Karim

Masters Theses

“Cyber-Physical Systems (CPSs) are complex systems that integrate physical systems with their counterpart cyber components to form a close loop solution. Due to the ability of deep learning in providing sensor data-based models for analyzing physical systems, it has received increased interest in the CPS community in recent years. However, developing vision data-based deep learning models for CPSs remains critical since the models heavily rely on intensive, tedious efforts of humans to annotate training data. Besides, most of the models have a high tradeoff between quality and computational cost. This research studies deep learning algorithms to achieve affordable and upgradable …

Intrinsic Mechanical Properties Of Zirconium Carbide Ceramics, Nicole Mary Korklan

Masters Theses

“This research focuses on the processing and mechanical properties of zirconium carbide ceramics (ZrC_x). The first goal of this project was to densify near stoichiometric (i.e., x as close to 1 as possible) and nominally phase pure ZrC_x. The maximum stoichiometry achieved for the ZrC_x (C/Zr ratio of 0.92) was measured using gas fusion analysis. Hot pressing was used to obtain dense ZrC_x. Archimedes was used to determine the relative density of hot pressed ZrC_x at > 95%. Scanning electron microscopy (SEM) was used to determine the overall microstructure of the hot pressed …