Digital Commons Network^™

An Investigation Of The Sensitized Fluorescence Of The Mercury-Sodium And The Cesium-Rubidium Systems., Joseph Edward Hueser

Masters Theses

"The experimental apparatus and techniques used for the study of sensitized fluorescence are discussed. In this study both glass and metal absorption cells were employed. Included also is a discussion of the transitions which 11 occur in the mercury-sodium and the cesium-rubidium systems, which were the two systems investigated. Both photographic and photometric techniques were used as means of detecting the sensitized fluorescence. The actual experimental apparatus used are discussed together with conclusions to be drawn and recommendations to be made from the individual experiments. The purpose of the experiments was to better understand the energy exchange processes in a …

The Effect Of The Static Compaction On The Mechanical And Physical Properties Of Asphalt Concrete Hot-Mixes, Abdel-Gawad A. Bahgat

Masters Theses

"The objective of this investigation was to study the effect of the static compaction effort upon the physical and mechanical properties of asphalt concrete hot mixes. To study the effect of the static compaction upon the physical properties of the asphalt mixes, six mixes were prepared using hard, well graded crushed limestone as an aggregate, blended with an 85-100 penetration grade asphalt cement. The control mix was prepared and tested in accordance with the Marshall method for mix design. The other five mixes were prepared and tested using the same procedures of Marshall except for compaction, where five different static …

Aging Of The Dielectric Properties Of Some Perovskite Ceramics, Hector Troche-Maldonado

Masters Theses

"The effect of aging upon the dielectric constant and the dissipation factor were investigated for a number of lead titanate zirconate ceramics of varying composition. The ceramics investigated have a perovskite type structure. The materials chosen all have tetragonal symmetry at room temperature but are close in composition to materials of rhombohedral symmetry.

Empirical relations were determined for each specimen giving the rate of aging of the dielectric constant (K) and loss factor in terms of the frequency (f) and the elapsed time (t). The range of frequency was l kcps to l mcps; the range of elapsed time was …

The Plastic Behavior Of Beams With Butt Welded Connections., Paul George Hayes

Masters Theses

"The purpose of this study is to determine the length of butt welds required to develop the full plastic section modulus of a 6 WF 20 rolled section of A-36 steel. The members were electric arc welded with LR 6070 electrodes. Two-point loading was used to develop a zone of pure moment with zero shear where these members were joined.

At the cross-section to be welded, all the flange edges were prepared to receive a single-vee butt weld and the webs were prepared for a double-vee butt weld. In all cases the full length of the flange was welded. However, …

Optimalization By Peak-Holding, Curtis W. Dodd

Masters Theses

"The problem presented is a study of the peak-holding method of optimalization. This method applies to a system that has an extremum.

After describing how the complete system, consisting of the controller and the controlled system, works; variations in the controller are presented. These variations are changes in the final stage of the controller, the servo. A phase-plane analysis shows how the output of the controlled system varies with its rate of change. Limitations are presented which tell why the system cannot be kept at its peak value at all times. Finally an analog simulation is used to study the …

A Study Of Methods For Estimating Parameters In The Model Y(T) = A₁E-P₁T + A₂E-P₂T + Ε, Gerald Nicholas Haas

Masters Theses

“In this study, methods for estimating the unknown parameters A₁, A₂, p₁, and p₂ in the model
y(t) = A₁e^-p₁t + A₂e^-p₁t + ϵ
where ϵ ~ N(0, σ) are investigated. In the model investigated, A₁, A₂, p₁, and p₂ are positive.

Four methods, one non-iterative method and three iterative methods, for estimating parameters in this model are investigated. The non-iterative method is known as Prony's Method. The three iterative methods are (1) the Modified Gauss …

Cytomorphological Studies Of The Ascogenous Hyphae Of Four Species In The Genus Chaetomium, Burton M. Berkson

Masters Theses

No abstract provided.

Dropouts And Their Relationship To Guidance, Darrell Lower

Masters Theses

No abstract provided by author.

The Effect Of Communism On The Art Of Soviet Russia, Wilma Dell Tipsword

Masters Theses

No abstract provided.

Social Implications Of Picture Writing In Modern Society, Charles T. Lowe

Masters Theses

No abstract provided.

A Comparative Study Of Greenup And Toledo, Illinois, Edgar W. Morgan

Masters Theses

The purpose of this study is to make a comparative analysis of Greenup and Toledo, Illinois. The intent is to investigate and compare the historical origin, reasons for settlement, early development, growth patterns, industry, lines of transportation, and elements of similarity and difference between the towns.

Included in the study are interpretations presented as to why the towns grew up so close together, why one became larger than the other, why the one became the county-seat and still remained smaller, how industry and transportation are important to these communities, and the ultimate character which has evolved for each community. Also …

GaldóS And Misericordia, Allegra Wilber

Masters Theses

No abstract provided.

Yu. Martov's Youth And Its Relation To The Jews In Marxism, Lester T. Hutton

Masters Theses

No abstract provided.

Problems Of Small High Schools With Some Special Reference To The Problems Of Curriculum, John F. Griffin

Masters Theses

No abstract provided by author.

The Political Career Of Roger C. Sullivan, Samuel Alvin Lilly

Masters Theses

No abstract provided.

England And Jacobinism, Lucille Mae Lance

Masters Theses

No abstract provided.

Population And Family Planning In India, Mrudula Shah

Masters Theses

No abstract provided.

An Investigation Of Motor Ability Tests With Application To The Battery Used By The Department Of Physical Education For Women At Eastern Illinois University, Lois Ann Loveland

Masters Theses

No abstract provided.

The Effect Of Metallic And Inert Electrodes On The Electrochemical Degradation Of Alkyl Benzene Sulfonate., Thomas Patrick O'Farrell

Masters Theses

"The purpose of this study was to investigate the effects of various metallic and inert electrode combinations on the electrochemical degradation of alkyl benzene sulfonates (ABS) in water and to determine the rate and degree of AB3 removal.

Selected combinations of copper, aluminum, iron, and carbon plate electrodes were studied in systems of tap, distilled and river waters containing an initial ABS concentration of 10 mg/1, using a current density of approximately 0.5 milliamperes per square centimeter and a total detention time of 6 hours. Samples were collected at appropriate time intervals and were analyzed for ABS, chemical oxygen demand …

On A Numerical Solution Of Dirichlet Type Problems With Singularity On The Boundary., Randall Loran Yoakum

Masters Theses

No abstract provided.

The Anodic Dissolution And Disintegration Of Gallium And Aluminum And The Initial Valency Of The Ions Entering Aqueous Solutions., Kenneth Anderson Poush

Masters Theses

Gallium dissolved very slowly in dilute acids like HC1, H₂SO₄and HCIO₄. The rate was substantially accelerated if the metal was connected with a platinum electrode in the same solution. From the volume of the hydrogen developed the trivalency of gallium ions going into solution was calculated. This same ionic charge was obtained from coulometric measurements using gallium-amalgam as the anode. The initial ionic charge of aluminum dissolving from an aluminum amalgam anode was evidenced as being plus three by coulometric measurements.

Gallium and aluminum anodes were found to partially disintegrate while the current flowed. …

The Toxic Effects And Fate Of Selected Pesticides In Natural Water., Donald Lee Evans

Masters Theses

"The extensive application of synthetic organic pesticides in the United States has created many problems, particularly with respect to fish life. While a number of investigations have been undertaken to determine the toxicity of several pesticides to various species of fish, a great deal of research work is needed before the problem is completely understood.

The individual toxicities of DDT, BHC, 2.,4-D, and Sevin to western golden shiners were determined by means of the bioassay procedure at a t empera t ure Of 16oc. The four chemicals studied were found to be toxic to the test fish with Median Tolerance …

A Study Of Crystallization Of Synthetic Fluor-Glaucophane Compositions, Kartini Tjokroatmodjo

Masters Theses

"The ability to form a stable glass and the crystallization properties of four compositions close to that of glaucophane, Na₂Mg₃Al₂Si₈O₂₂(OH)₂ studied. Three glasses were compared with a fourth glass containing no fluorine. The crystallization products of all four glasses were examined between the temperature range 600 - 1200°C. The crystallization products of the three fluorine containing glasses were similar, consisting of mica below 1000°C and of mica, fluor-glaucophane, enstatite and forsterite above 1000°C. In the fluorine free glass, enstatite was the only crystalline phase present below 1000°C, however, forsterite …

A Study On Estimating Parameters Restricted By Linear Inequalities, William Lawrence May

Masters Theses

“A comparison of two methods for estimating parameters restricted by linear inequalities in linear statistical models was made.

The first method consisted of finding the least squares estimates of the parameters disregarding the restrictions, and then forcing those parameters that were outside of their allowable ranges to the nearest endpoints of those ranges.

The second method made use of quadratic programming to minimize the same sum of squares that the first method minimized while keeping the parameters inside or at the endpoints of their allowable ranges.

The quadratic programming gave better estimates of the parameters in the sense that the …

A Determination Of The Theoretical Stresses In A Deep Beam., James William Tritz

Masters Theses

"This paper presents an analytical solution of the stress distribution in a deep beam of finite length. The beam being considered is analyzed as one of plane stress. The method employed superimposes two stress functions each of which is a trigonometric series. The first stress function satisfies all boundary conditions except that of zero stress on the vertical faces. The second function is found, so that, when combined with the first function, all boundary conditions are satisfied. The IBM 1620 digital computer is then used to find the stresses for a particular beam. The results of this analysis are then …

A Study Of A Method For Selecting The Best Of Two Or More Mathematical Models, August J. Garver

Masters Theses

"A method for selecting the best in some sense of two or more mathematical models is investigated in this study. The method is that of using part of the data to estimate parameters and using the resulting equation to predict the additional data which are then compared with the existing data not used in estimating the parameters. In particular the effects produced on the method by the number and location of points used in estimating the parameters and the criterion for determining the best fit are investigated. It was concluded from the results of an empirical investigation that the success …

Influence Of Quartz Particle Size And Concentration On The Fracture Stresses Of Triaxial Alumina Porcelain., John David Weyand

Masters Theses

"Quartz particles were introduced into a typical triaxial alumina porcelain. Three levels of particle size and three levels of concentration were studied. The strength sample sizes were large. A diametral- compression loading method was used for strength testing. It was found that the porcelain strength decreased with increasing grain size and concentration of quartz particles. A linear relationship existed between log quartz concentration and mean fracture stress"--Abstract, p. ii

The Effect Of Surface Roughness, Cure Pressure, And Temperature Level On The Thermal Resistance Of Bonds And Contacts, David Leo Schwaller

Masters Theses

"This investigation was conducted to determine the thermal effect of temperature level, surface roughness, and curing pressure on bars and bonded interfaces.

The equipment used in this investigation is shown in Fig. 1 and Fig. 2. The four specimens used, cylindrical aluminum alloy bars, were cut radially at their midpoints and faced on a lathe. Heat was supplied by an electrical resistance heating element and an ice bath was used to conduct heat from the alloy specimen. A heat shield was used to insure one dimensional heat flow. Spacers were placed in the insulation at the top, the interface, and …

Effect Of Hydroxyethyl Cellulose On Properties Of Concrete At Early Ages., Vipinchandra R. Shah

Masters Theses

"In this investigation, hydroxyethyl cellulose was used as an admixture in plain concrete. The admixture was tested for its effect on the compressive strength of plain concrete cylinders and for its effect on the flexural strength of plain concrete beams. Specimens were also tested for freeze-thaw durability and shrinkage.

The test results indicated that hydroxyethyl cellulose has the effect of increasing the compressive strength and decreasing the flexural strength of plain concrete. The rapid freezing and thawing tests showed that the durability increases with increase in amount of admixture.

The tests were carried out in the Materials Laboratory of the …

A Study Of The Effect Of The Crystal Orientation On The Internal Friction Of Magnesium Single Crystals., Robert Ray Nothdurft

Masters Theses

"The method of growing, etching, and cutting magnesium single crystals is described in some detail. Ten single crystals of magnesium of different orientations were prepared and studied. The internal friction and relative Young’s modulus were measured for each specimen as a function of applied stress on a quartz composite oscillator. The effect of the orientation on the strain amplitude independent decrement, the strain amplitude dependent decrement and the ratio of the strain amplitude dependent decrement to the relative Young's modulus is compared to the theory of the pinned dislocation model of Granato and Lücke"--Abstract, p. ii