Digital Commons Network^™

Computer Aided Detection Of Oral Lesions On Ct Images, Shaikat Mahmood Galib

Masters Theses

"Oral lesions are important findings on computed tomography images. They are difficult to detect on CT images because of low contrast, arbitrary orientation of objects, complicated topology and lack of clear lines indicating lesions. In this thesis, a fully automatic method to detect oral lesions from dental CT images is proposed to identify (1) Closed boundary lesions and (2) Bone deformation lesions. Two algorithms were developed to recognize these two types of lesions, which cover most of the lesion types that can be found on CT images. The results were validated using a dataset of 52 patients. Using non training …

Comprehensive Benefits Of Green Roofs, Madison R. Gibler

Masters Theses

"Green infrastructure uses vegetation, soils, and natural processes to manage water and create healthier urban environments, providing traditional roof services and alternative stormwater management technologies. Other benefits and impacts are not yet fully understood or valued. Research conducted assesses specific stormwater benefits of green roofs, providing information on nutrient leaching from media; and analyzes potential energy benefits through side-by-side comparisons of full-scale white, traditional black rubber, and green roofs in the mid-continent Missouri climate. Roofing media selection impacted leaching of nutrients, suspended solids, and organic carbon from the tested green roof media. Thermal properties were investigated at the building level, …

Pipeline Leak Detection, Marcia Golmohamadi

Masters Theses

"In the present research two techniques are applied for leak detection in pipelines. The first method is a hardware-based technique which uses ultrasonic wave's emission for pipeline inspection. Ultrasonic waves are propagated in the pipe walls and reflected signal from leakage will be used for pipe analysis. Several Pipes with various dimensions and characteristics are modeled by finite element method using ANSYS. Second order longitudinal modes of ultrasonic waves are emitted in their walls. For this purpose, excited frequency is calculated such that it excites the second order longitude mode. In order to investigate the behavior of emitted wave in …

Model Predictive Current Control Of Switched Reluctance Motor With Inductance Auto-Calibration, Xin Li

Masters Theses

"The thesis is composed of three papers, which investigate the application of Model Predictive Controller (MPC) for current control of Switched Reluctance Motor (SRM). Since the conventional hysteresis current control method is not suitable for high power SRM drive system with low inductance and limited switching frequency, MPC is a promising alternative approach for this application. The proposed MPC can cope with the measurement noise as well as uncertainties within the machine inductance profile. In the first paper, a MPC current control method for Double-Stator Switched Reluctance Motor (DSSRM) drives is presented. A direct adaptive estimator is incorporated to follow …

Spatial And Temporal Modulation Of Heat Source Using Light Modulator For Advanced Thermography, Arvindvivek Ravichandran

Masters Theses

"Thermography is a Non-Destructive Testing (NDT) method that has found increasing use in industry and research. It has the advantages of being non-contact and be able to interrogate a large surface simultaneously. Active thermography using flash lamps as heat source has been demonstrated for identifying blind holes and delamination in composites. Despite these advancements, active thermographic approach fails to defects like cracks. Under uniform illumination heat flow is predominantly 1D and can easily circumvent a narrow feature. This can be overcome by using a focused light/laser source onto the surface to impose a 3D heat flux. The disadvantage is that …

A New Technique For Modeling The Geomorphology Of A Slow Moving, Soft-Slope Landslide Using Terrestrial Lidar, Nathan Bradley Rohrbaugh

Masters Theses

"Soft slope movement is a big problem whether it involves an engineered slope, one that is near infrastructure, or both. Active landslides that fail slowly sometimes allow ample time to affect remedial works. In order to plan effective remedial works, there needs to be a model of the entire geometry of the slide. This thesis describes a new approach to evaluate the morphology of slope geometry using Light Detection and Ranging (LiDAR) data obtained from simple targets strategically positioned on a slide body. The data was gathered in three-month intervals over a period of one year to allow enough time …

Energy Disaggregation In Nialm Using Hidden Markov Models, Anusha Sankara

Masters Theses

"This work presents an appliance disaggregation technique to handle the fundamental goal of the Non-Intrusive Appliance Load Monitoring (NIALM) problem i.e., a simple breakdown of an appliance level energy consumption of a house. It also presents the modeling of individual appliances as load models using hidden Markov models and combined appliances as a single load model using factorial hidden Markov models. Granularity of the power readings of the disaggregated appliances matches with that of the readings collected at the service entrance. Accuracy of the proposed algorithm is evaluated using publicly released Tracebase data sets and UK-DALE data sets at various …

Fuzzy Adaptive Resonance Theory: Applications And Extensions, Clayton Parker Smith

Masters Theses

"Adaptive Resonance Theory, ART, is a powerful clustering tool for learning arbitrary patterns in a self-organizing manner. In this research, two papers are presented that examine the extensibility and applications of ART. The first paper examines a means to boost ART performance by assigning each cluster a vigilance value, instead of a single value for the whole ART module. A Particle Swarm Optimization technique is used to search for desirable vigilance values. In the second paper, it is shown how ART, and clustering in general, can be a useful tool in preprocessing time series data. Clustering quantization attempts to meaningfully …

3d Numerical Modelling Of Micropiles Interaction With Soil & Rock, Audai Kamal Theinat

Masters Theses

"A 5-span bridge along the Foothills Parkway of the Great Smoky Mountains, TN, was recently completed. Two out of the four piers were instrumented to measure the load transfer in the foundations. The foundations consisted of twenty 10-inch micropiles under the pile cap for each pier. Strain gages were installed and monitored at the different stages of construction. The objective of this research is to examine the interaction between the ground and micropiles using the field data performance and numerical modelling. The 3D computer model consists of the micropile foundation within the steep rock bedding planes and overburden soils. The …

Rote-Lcs Learning Classifier System For Classification And Prediction, Benjamin Daniels

Masters Theses

"Machine Learning (ML) involves the use of computer algorithms to solve for approximate solutions to problems with large, complex search spaces. Such problems have no known solution method, and search spaces too large to allow brute force search to be feasible. Evolutionary algorithms (EA) are a subset of machine learning algorithms which simulate fundamental concepts of evolution. EAs do not guarantee a perfect solution, but rather facilitate convergence to a solution of which the accuracy depends on a given EA's learning architecture and the dynamics of the problem.

Learning classifier systems (LCS) are algorithms comprising a subset of EAs. The …

A Novel Entropy Production Based Full-Chip Tsv Fatigue Analysis, Tianchen Wang

Masters Theses

"Through-silicon vias (TSVs) are subject to thermal fatigue due to stress over time, no matter how small the stress is. Existing works on TSV fatigue all rely on measurement-based parameters to estimate the lifetime, and cannot consider detailed thermal profiles. In this paper, we propose a new method for TSV fatigue prediction using entropy production during thermal cycles. By combining thermodynamics and mechanics laws, the fatigue process can be quantitatively evaluated with detailed thermal profiles. Experimental results show that interestingly, the landing pad possesses the most easy-to-fail region, which generates up to 50% more entropy compared with the TSV body. …

Optimal Techno-Economic Sizing Of Wind/Solar/Battery Hybrid Microgrid System Using The Forever Power Method, Sami Hamed Alalwani

Masters Theses

"Advancement in power electronics, energy storage, control, and renewable energy sources has led to the use of integrated renewable energy sources in islanded microgrids (MG). Also, the uses of integrated renewable energy sources have become more technically applicable, more economically feasible, and more environmentally friendly than conventional sources. As a result, electrification of rural villages using renewable energy technologies has started to become widely adopted around the world. Since generating power from renewable energy sources is highly intermittent and difficult to predict, the use of proper energy storage technology is important to eliminate mismatches between the load demand and generation. …

A Valuation Model For Two-Stage Contract Negotiations Over Multiple Interdependent Issues, Nnaemeka U. Amaeshi

Masters Theses

"Most real-world negotiation scenarios involve multiple interdependent issues over which the negotiating parties will seek an agreement. Simultaneous negotiation over multiple interdependent issues is an especially challenging problem because utility functions of negotiating agents are typically nonlinear and difficult to analyze. Also, negotiations often happen under circumstances of incomplete information, where either party has either little or inaccurate information about the preferences or utilities of the other party. Consequently, negotiations may go over multiple rounds until a mutually acceptable agreement is reached. The objective of this research is to create a quantitative model of decision-making that helps one negotiating party …

Cappack Devices For Enhanced Qnmr Measurements In 1H Nmr Spectroscopy, Lingyu Chi

Masters Theses

"Quantitative NMR analyses can be improved by adding well-defined external references for measuring sample properties on absolute scales. Special Capillary-tube Package (CapPack) devices were invented that provide in situ information (e.g., temperature, pH, pressure, integration, chemical shift, lock, etc.) about a sample with spectral imprimaturs. A new microscale glass-sealing technique produced CapPack devices that can survive high temperatures and pressures in harsh environments. Two CapPack devices are discussed: (1) Gradient CapPack-- a device for examining the irradiation bandwidth of solvent-suppression pulse sequences; (2) T₁ CapPack - a device for examining the T₁ robustness of solvent-suppression pulse sequences. A …

Thermodynamic And Chemical Kinetic Coupled Modeling For The Determination Of Cyclic Combustion Phasing In Hcci Engines, Krishawn Michele Goodwin

Masters Theses

"Homogeneous charge compression ignition (HCCI) is a low temperature combustion mode that contains great potential for decreasing emissions while increasing efficiency in internal combustion engines. The limitation is in that it is inherently difficult to control based on the lack of an external combustion trigger. This thesis outlines the potential of using the combustion residual species of carbon monoxide as a method of controlling the location of combustion by using data from a computer model. The model is a nonlinear five-state thermodynamic model that is coupled with a skeletal chemical kinetic model for PRF96. The model computes the amount of …

Design And Implementation Of Low Complexity Wake-Up Receiver For Underwater Acoustic Sensor Networks, Ming Yue

Masters Theses

"This thesis designs a low-complexity dual Pseudorandom Noise (PN) scheme for identity (ID) detection and coarse frame synchronization. The two PN sequences for a node are identical and are separated by a specified length of gap which serves as the ID of different sensor nodes. The dual PN sequences are short in length but are capable of combating severe underwater acoustic (UWA) multipath fading channels that exhibit time varying impulse responses up to 100 taps. The receiver ID detection is implemented on a microcontroller MSP430F5529 by calculating the correlation between the two segments of the PN sequence with the specified …

Fault Interpretation And Reservoir Characterization Of The Farewell Formation Within Kerry Field, Taranaki Basin, New Zealand, Waleed Deefallah M Alotaby

Masters Theses

"The Kerry Field, located in the southern offshore Taranaki Basin, is a large liquid-rich gas accumulation with a thin (20 m) oil rim. The field was discovered by the New Zealand Oil & Gas in 1986 (well Kupe South-1). The gas and oil are trapped within a 9.2 km² fault-dependent three-way dip closure in the Paleocene Farewell Formation reservoir. Pressure, volume, and temperature (PVT) data indicate that the gas and oil columns in the field are in equilibrium with one another and are saturated at current reservoir conditions.

The Farewell Formation is the uppermost formation of the Kapuni Group …

A Decision Support Simulation Model For Bed Management In Healthcare, Raja A. Baru

Masters Theses

"In order to provide access to care in a timely manner, it is necessary to effectively manage the allocation of limited resources such as beds. Bed management is key to the effective delivery of high-quality and low-cost healthcare. An efficient utilization of beds requires a detailed understanding of the hospital's operational behavior. It is necessary to understand the behavior of a hospital in order to make necessary adjustments to its resources, and policies, which can improve patient's access to care. The aim of this research was to develop a discrete event simulation to assist in planning and staff scheduling decisions. …

Emission Source Microscopy Applications On Emi Source Localization And Emi Mitigation With Lossy Materials, Xiangyang Jiao

Masters Theses

"In Section 1, the emission source microscopy (ESM) methodology will be introduced and used to identify the sources of radiation on different DUTs. As the new technology generation, the integration density and the operating speed of integrated circuits have been increasing steadily. However, root cause diagnostics to locate the source of EMI radiation is more problematic in the complex system. The ESM technique provides a powerful tool to detect and characterize the active sources of radiation. The amplitude and phase of fields are measured on a plane away from the DUT, and this measurement can get rid of the evanescent …

An Investigation Of Shear-Friction Of Lightweight Aggregate Concretes, Kristian Krc

Masters Theses

"This thesis reports the results of research initiated to evaluate the influence of lightweight aggregate type and casting procedure on shear transfer across an interface of concretes cast at different times. The topic of shear transfer has been evaluated and revisited in recent PCI Design Handbooks. In this test program, a series of cold joint as well as monolithic specimens are evaluated. The peak shear strength and post peak behavior are examined. The experimental matrix included 28 push-off specimens that were either cast monolithically or cast at different times creating the condition referred to as a cold joint. The variables …

Space-Based Relative Multitarget Tracking, Keith Allen Legrand

Masters Theses

"Access to space has expanded dramatically over the past decade. The growing popularity of small satellites, specifically cubesats, and the following launch initiatives have resulted in exponentially growing launch numbers into low Earth orbit. This growing congestion in space has punctuated the need for local space monitoring and autonomous satellite inspection. This work describes the development of a framework for monitoring local space and tracking multiple objects concurrently in a satellite's neighborhood. The development of this multitarget tracking systems has produced collateral developments in numerical methods, relative orbital mechanics, and initial relative orbit determination.

This work belongs to a class …

On-Die Sensors For Transient Events, Mihir Vimal Suchak

Masters Theses

"Failures caused by transient electromagnetic events like Electrostatic Discharge (ESD) are a major concern for embedded systems. The component often failing is an integrated circuit (IC). Determining which IC is affected in a multi-device system is a challenging task. Debugging errors often requires sophisticated lab setups which require intentionally disturbing and probing various parts of the system which might not be easily accessible. Opening the system and adding probes may change its response to the transient event, which further compounds the problem.

On-die transient event sensors were developed that require relatively little area on die, making them inexpensive, they consume …

Damage Detection Through Acoustic Emission Of Fracture Processes In Concrete Masonry Units, John Alexander Cain

Masters Theses

"Masonry structures are vulnerable to earthquakes; their brittleness and discontinuous formation make them susceptible to collapse. In the event of an emergency, this could be detrimental and perhaps fatal. The area of Structural Health Monitoring (SHM) is focused on understanding the behavior of structures for the sake of safety and predicting their longevity. One applicable technique to monitor this behavior is Acoustic Emission (AE). Acoustic Emissions are transient elastic waves released as microcracks nucleate from stress intensities, coalesce into cracks and then accumulate as damage. AE monitoring is a favorable method because it is capable of detecting cracking from within …

Developing A Novel Methodolgy And Testbed For Fatigue Analysis Of Metal Specimens, Sai Aravind Palepu

Masters Theses

"A prototype of fatigue testing machine was built to determine the fatigue strength of materials. Proposed testing prototype was displacement controlled magnetic type bend fatigue testing machine. Designed prototype was tuned to operate at or near resonance of the specimen in order to amplify excitation displacement. Low maintenance i.e. zero wear of the parts was achieved, there were no moving components in the prototype machine. Crucial components used to build were: DC power supply, solenoid, Arduino UNO, supports and laser displacement sensor. DC source used to pass current through solenoid producing magnetic field; mosfet and Arduino generated square waves of …

Design And Implementation Of A Broker For Cloud Additive Manufacturing Services, Venkata Prashant Modekurthy

Masters Theses

"The growing number of cloud Additive Manufacturing (AM) services, offered by different providers over the Internet, makes it challenging for consumers to compare these cloud AM services to select a service of their choice. In addition, it is even more challenging for consumers to compare these cloud AM services against their personal preferences. This is because, consumers personal preferences on multiple service attributes such as price, material, accuracy, and schedule, should be considered for cloud AM service selection. The decentralized nature of these cloud AM services coupled by the need to consider consumers personal preferences during cloud AM service selection, …

A New Equivalent Dipole-Moment Source Reconstruction Method For Ic Radiated Emissions Based On Near-Field Scanning, Xiao Ren

Masters Theses

"In this paper, a new dipole-moment model based on near-field scanning for representing equivalent IC radiation emissions on a PCB (Print Circuit Board) is presented. One set of dipoles (both electric dipoles and magnetic dipoles) are used to characterize near-field and far-field radiation from the source. In order to build the model, tangential electric field and magnetic field on a Huygens's box enclosing the radiation source are needed. Both the phase and magnitude of these tangential fields are obtained either in simulation or in measurement by near-field scanning method. Two steps are established to reconstruct the dipole moment. Firstly, a …

A Geochemical Investigation Of Co₂ Sequestration And Site Characterization At Two Missouri Locations, Robert Allen Swain

Masters Theses

"The feasibility of sequestering CO₂ in saline aquifers of Lamotte Formation sandstone was investigated at wells located near Thomas Hill power plant, Moberly, MO and Sioux City Power Plant in Florissant, MO. Governing factors of using aquifers for CO₂ disposal include water salinity, potential for carbonic acid buffering, rate of precipitation of carbonate minerals following CO₂ introduction into the host aquifer, and the integrity of the Davis and Derby-DoeRun shale as a trap rock to prevent migration of the CO₂ phase and carbonic acid into the overlying potable Ozark Aquifer.

Both in situ and laboratory methods …

Uncertainty Quantification Of Turbulence Model Closure Coefficients For Transonic Wall-Bounded Flows, John Anthony Schaefer

Masters Theses

"The goal of this work was to quantify the uncertainty and sensitivity of commonly used turbulence models in Reynolds-Averaged Navier-Stokes codes due to uncertainty in the values of closure coefficients for transonic, wall-bounded flows and to rank the contribution of each coefficient to uncertainty in various output flow quantities of interest. Specifically, uncertainty quantification of turbulence model closure coefficients was performed for transonic flow over an axisymmetric bump at zero degrees angle of attack and the RAE 2822 transonic airfoil at a lift coefficient of 0.744. Three turbulence models were considered: the Spalart-Allmaras Model, Wilcox (2006) k-ω Model, and the …

Shear-Friction Of Sand-Lightweight Clay And Slate Aggregate Concretes With Varied Reinforcement Ratios, Samantha Lynn Wermager

Masters Theses

"This thesis focuses on the structural properties of sand-lightweight aggregate concrete in terms of shear transfer strength at cold-joint interfaces. This type of interface is common for precast concrete connections which are typically designed using the shear-friction concept. This testing program was meant to expand the shear-friction database and evaluate the appropriateness of current shear-friction design provisions with respect to sand-lightweight concrete. This study builds on the work done by Shaw (2013) who studied lightweight expanded shale aggregate concrete. The current study included thirty-two push-off specimens constructed from sand-lightweight concrete with a target compressive strength of 5,000 psi. Either expanded …

Paleogeographic And Paleoenvironmental Evolution Of Lacustrine And Fluvial Upper Triassic Zhangjiatan Shale Sequence, Ordos Basin, China, Qiuwan Yu

Masters Theses

"Detailed sequence stratigraphic and depositional systems analyses can effectively delineate factors and processes controlling deposition of fine-grained lacustrine sediments. Upper Triassic Zhangjiatan (ZJT) Shale Bed and adjacent strata in Ordos foreland basin was used as an example. A new depositional sequence model shows that the maximum regressive shoreline was more landward than that at the lowest lake-level. The study area is on the ramp margin, covering 100x90 km². Thin sections, cores and well-logs of 80 wells are used to calibrate log signatures, document lithofacies, and interpret depositional facies in a sequence stratigraphic context. The entire sequence thickens from …