Digital Commons Network^™

Yu. Martov's Youth And Its Relation To The Jews In Marxism, Lester T. Hutton

Masters Theses

No abstract provided.

Population And Family Planning In India, Mrudula Shah

Masters Theses

No abstract provided.

The Effect Of A Lubricant On Tool-Workpiece Interface., Kenneth Eugene Spencer

Masters Theses

"The purpose of this study was to compare the effects of cutting fluids and the method of application to an orthogonal cutting process.

The cutting operation was performed on a lathe. The fluids use d were compressed air and a solution of emulsifiable oil and water.

The flooding of the area was produced by directing a copious supply of fluid over the cutting a rea. The directed stream was obtained by pumping the fluid through a small hole drilled into the tool holder, immediately above and behind the tool face, which directed the fluid at the tool-chip interface.

The results …

The Anodic Dissolution Of Zinc In Nitrate Solution., Jo Lisle Reed

Masters Theses

"The increasing demand for protective metals as coatings and non-corrosive alloys has stimulated extensive research on the fundamental behavior of metals in corrosive media.

One of the problems still unsolved is the nature of the mechanism of the anodic dissolution of metals like zinc, magnesium, beryllium, cadmium, and aluminum in aqueous salt solutions. Several schools of investigators have proposed different and opposing theories to explain the discrepancies which often arise between coulometric data and the weight loss of metal electrodes in certain salt solutions.

The purpose of this investigation was to obtain experimental data for the anodic dissolution of zinc …

Thermal Resistance Of Bonds And Contacts, David Marion Lewis

Masters Theses

"The adhesive and sealant Industry has more than kept pace with our rapidly expanding technology of today. This growth has left the standardization of data on adhesives far behind and lack of this data is obvious. Of the many applications, particularly as related to space technology and energy conversion, the resistance to the flow of heat offered by the bond layer is of considerable importance.

Little information is available on the effect of adhesives on heat transfer. In connection with their work on honeycomb panels, Rankle, Gier, and Bevans (7) determined the thermal resistance of the particular type of adhesives …

Experimental Evaluation Of Thermal Stresses On The Outer Surface Of A Thick-Walled Tube., Vinodray T. Patel

Masters Theses

"In this investigation an attempt has been made to measure thermal stresses on the outer surface of a thick- walled tube. The inside surface was heated by steam passing through the tube while the outer surface was cooled by water. Two temperature compensated strain gages were used to measure strains in the tangential and axial directions respectively. The advantage of using this type of strain gage is to avoid the use of a dummy gage to compensate for the temperature effect.

The analytical solution to the problem was derived and the values of thermal stresses were calculated theoretically and compared …

Learning Set Formation In The Guinea Pig, Paul E. Burk

Masters Theses

No abstract provided.

A Study Of Time Management – By A Selected Group Of Employed Homemakers, Patricia M. Skrocki

Masters Theses

Chapter I

The Problem and Definition of Terms Used

During recent years there has been a steady increase in the number of homemakers employed full-time outside their homes. When a homemaker resumes dual responsibilities she is faced with an increased need to manage her time well in order to meet the family needs as mother, wife, and homemaker plus meeting the employers expectations of an employee. There has been much speculation concerning time management by these employed homemakers, but there was very little available research on this areas of management.

The Problem

Statement of the Problem. The purpose of this …

A Study Of Verbal Output, Relating To Otsego Public School First Grade Students With Functional Articulatory Defects, John M. Bartholomy

Masters Theses

The Problem and Its Background

The Problem

The purpose of this study is to determine whether or not the verbal output of first grade elementary school children is reduced when one of the participants in conversational communication has an articulation speech defect. A speech defect has long been thought to cause a reduction in the verbal output of the possessor of that speech defect. This present study seeks to determine whether or not an articulatory speech defect also reduces the verbal output of the normal speaking person with whom he is communicating.

Labor Turnover As A Factor In Personnel Evaluation, James D. Taylor

Masters Theses

Abstract

Management needs to know how it is doing in the field of personnel management, just as it does in the area of financial management. In order to determine this, an evaluation of the personnel program is necessary. When completed, such an evaluation provides management with the information necessary to effectively plan and budget the personnel program.

The personnel audit audit has been used as a means of evaluating the personnel program. The audit can cover all of the various aspects of the personnel program or it can be restricted to only one of the personnel functions. In the past …

Absent Fathers And Problem Behavior, A Comparison Of Children From Broken And Unbroken Homes, Earl Walter Morris

Masters Theses

Introduction

This study is an attempt to explore several aspects of the influence of the family upon the occurrence of problem behavior among children.¹ Essentially it deals with a comparison of the occurrence of problem behavior among two groups of children: (1) children in the homes where the father is absent because of death, divorce, separation or desertion; and (2) children in homes where both parents are present.

In the past the "broken home" has received a great deal of attention is delinquency research. The physical presence of absence of a parent has not been found to be highly …

The Teaching Of Succession Through The Use Of Pond Infusion Cultures, James E. Cole

Masters Theses

Chapter I

Introduction

The approach to teaching biology for general education is significant. In a course of this nature, the learning of biological principles should be of primary concern. It is hoped that such principles then will lend themselves to the understanding and use of the scientific approach to everyday happenings. To do this, however, requires that the teacher use the inductive method for developing an understanding of the principles, and the deductive method for applying them.

Planners of these basic biology courses attempt to define areas of real concern and interest to students. Having defined these areas, the planners …

The Road To Murfreesboro: The Eleventh Michigan Volunteer Infantry From Organization Through Its First Battle, Wayne C. Mann

Masters Theses

Introduction

This is a history of the Eleventh Michigan Volunteer Infantry. It was never a famous regiment; it never did much out of the ordinary, and participated in few major battles. If three is anything to distinguish this regiment, it is that it is not distinguished. What happened to the Eleventh Michigan happened to countless other regiments both North and South. In a sense a study of one regiment provides a study of all.

The Eleventh tried to be different. It almost caught John Hunt Morgan in Kentucky. At Murfreesboro it made a desperate charge to retake the Cedars. It …

Areas Of Knowledge And Skills Essential To Occupational Therapists In Clinical Psychiatry --A Critical Study Of 395 Performance Examples, Elizabeth A. Boles

Masters Theses

Introduction

Occupational therapy, an allied medical discipline, has experienced rapid growth in the slightly more than forty years of its existence. The impetus given to this field through the training of World War I reconstruction aides, the forerunners of professional occupational therapists, has been described by Willard and Spackman.¹ These authors state that the inauguration of the first collegiate training program took place at Milwaukee Downer College in 1913. By 1921 a national professional organization had been formed,² and by 1938 four schools of occupational therapy had been accredited, based on standards set up by the American Medical …

United We Serve Relief Efforts Of The Women Of New York City During The Civil War, Phyllis Korzilius

Masters Theses

Preface

In high school and college most of my study in the Civil War period centered in the great battles, generals, political figures, and national events that marked the American scene between 1861 and 1865. Because the courses were of a broad survey type, it would have been presumptuous to expect any special attention to such issues as the role of women in the war. However, a probe of the more common or personal aspects of the "era of conflict" provides a deeper insight of the era as well as more knowledge. For this reason I have examined the work …

Investigation Of Ablation Materials, John Martyn Schattyn

Masters Theses

"The desired result of this paper is to determine what effect the physical and thermal properties of a material have on the ability of that material to act as an ablation heat shield. On the basis of their physical properties, five materials, nickel, beryllium, fused quartz, teflon, and phenolic-nylon, were chosen as examples.

The tools used for this study are heat transfer equations involving a change in material phase. The resulting criteria may be assumed applicable to any material exhibiting one of the four types of ablation processes"--Abstract, page 2.

The Performance Of A Mechanically-Aided Countercurrent Extraction Column., Jerry James Carr

Masters Theses

"In recent years liquid extraction has become a major industrial method for the separation of liquid solutions. Liquid extraction has proven successful in some separations performed only with great difficulty by other, more common mass-transfer operations. Th e industrial utilization of liquid extraction has resulted in considerable interest in the design and performance correlations of high-capacity, high-efficiency extraction equipment.

Continuous countercurrent columns, filled with various packings, baffles, and plates, have been found to be relatively ineffective in liquid extract on service. The density difference of the contacted phases is generally insufficient to, by itself, cause the intimate contact necessary for …

A Study Of A Method For Determining Properties Of Metals At High Strain Rates., Warren Heidbreder

Masters Theses

"An experimental method has been developed for determining the tensile and other physical properties of metals under high loading rates. Experimental equipment was designed, fabricated and tested. It was desirable to keep the equipment simple and inexpensive so that it could be used by operators Lacking experience in electronics and high-speed photography which are required for some of the more sophisticated methods now in use. The energy for pulling the specimens is supplied by smokeless gun powder. The firing of a cartridge into a closed cylinder with movable piston accomplishes the breaking of the specimen. A record of the time, …

Hydraulic Transportation Of Coal In Open Flumes., Nallapu Narayan Reddy

Masters Theses

"The objective of this study is to design a simplified form of hydraulic transportation system using open-flumes and operated by gravity in pitching coal seams. This type of system is to be used in conjunction with mining by hydraulic methods where the water used for the extraction of coal can also be used for the loading and transport functions"--Introduction p. 1

Determining Stability Of Nonlinear Control Systems Via Lyapunov's Method., John Joseph Komo

Masters Theses

"The problem undertaken in this thesis is to present Lyapunov's method of stability as i t applies to control systems and to use it in the stability analysis of nonlinear control systems. The variable gradient method of generating Lyapunov functions is presented since this seems the best general procedure for obtaining Lyapunov functions. Also, the integration of matrices method is presented as a comparison. ii

Procedures for the use of the variable gradient method and the integration of matrices method are written and several examples are used to illustrate these procedures.

It is concluded that Lyapunov's method is very definitely …

Analysis Of A Char-Forming Ablator, William J. Reilly

Masters Theses

"The purpose of this thesis is to conduct an analytical analysis of a char-forming ablation material. This is one phase of ablation heat transfer.

Fourier's general equation for one dimensional heat conduction is transformed to moving coordinates and is then solved using the applicable boundary conditions. Solutions of this equation are valid for initial studies in ablation heat transfer"--Abstract, page ii.

The Anodic Dissolution Of Zinc In Aqueous Solutions, Glenn E. Stoner

Masters Theses

"The increasing demand for protective metals as coatings and non-corrosive alloys has stimulated extensive research on the fundamental behavior of metals in corrosive media.

One of the problems still unsolved is the nature of the mechanism of the anodic dissolution of metals like zinc, magnesium, beryllium, cadmium, and aluminum in aqueous salt solutions. Several schools of investigators have proposed different and opposing theories to explain the discrepancies which often arise between coulometric data and the weight loss of metal electrodes in certain salt solutions.

The purpose of this investigation was to obtain experimental data for the anodic dissolution of zinc …

Determination Of The Standard Free Energy Of Formation Of Zr₃S₂, Peter E. Otten

Masters Theses

"The Knudsen effusion method was used to find the equilibrium magnesium pressure for the reaction

3 Zr (s) + 2 MgS (s) = 'Zr₃S₂' (s) + 2 Mg (v)

By using known standard free energy data for the formation of magnesium sulfide and by using the equilibrium magnesium pressure, the standard free energy of formation of Zr₃S₂ was calculated and could be expressed by the equation

Δ F° = -139,800 + 49.13 T cal/mole

in the temperature range 900 to 1100°C.

It was also found that Zr₃S₂ was the zirconium …

Swelling Properties Of Putnam Soil, Oscar M. Palma

Masters Theses

"Volume change of Putnam soil under different moisture contents and the swelling pressure developed by the soil at the same moisture contents were investigated using standard test procedures.

The theory of one dimensional consolidation of Terzaghi was reviewed as well as the literature on swelling and swell pressure.

It was found that swell depends mainly on the initial water content, while swelling pressure depends mainly on the dry density of the soil"--Abstract, page ii.

The Design, Construction, And Calibration Of A Hydrodynamic Journal Bearing Testing Machine., John H. Roberts

Masters Theses

"The purpose of this investigation was to design, construct, and calibrate a journal bearing testing apparatus. The design, construction, and operation of the apparatus are described.

Two bronze bearings with length to diameter ratios of 1.0 and 0.5 were tested using a gravity oil reed system. The speed and the location of inlet oil supply were varied, and the resulting coefficients or friction, oil flow rates, outlet oil temperatures, bearing shell temperatures, and eccentricities of the bearings were determined. These results were evaluated and compared with theoretical solutions.

The results compared favorably with the theoretical solutions and substantiated the use …

A Thermodynamic Study Of The Molybdenum-Sulfur System At 1100⁰C, Seth C. Schaefer

Masters Theses

"A static method was used to determine equilibrium sulfur pressure for molybdenum-sulfur mixtures at 1100°C.

The results obtained were:
(1) The molybdenum disulfide phase was stable in a sulfur pressure range of 1.023 x 10^-5 to 6.026 x 10^-1 atmospheres. A range of non-stoichiometry from MoS_2.00 to MoS_2.22 was determined under these conditions.
(2) The upper limit of sulfur content of molybdenum sesquisulfide (Mo₂S₃) is nearly stoichiometric.
(3) The extent of solid solution of sulfur in molybdenum is approximately 1.5 atomic % (0.5 wt %).
(4) Molybdenum sesqu-isulfide (Mo₂S_{3 …}

Small Signal Gain Analysis For A Seven Cavity Klystron Amplifier., William E. Hord

Masters Theses

"The problem was to find a suitable method of using the digital computer to calculate the small signal gain characteristics of a seven cavity klystron amplifier. Background material relevant to the problem was reviewed. The differential equations for small signal conditions in a gridless gap klystron were developed. These equations were then solved and put in a matrix form suitable for digital computer analysis. Suggestions for additional development were proposed"--Abstract p. ii

Convective Heat Transfer In Small Enclosed Air Spaces., Joseph Charles Kroutil

Masters Theses

No abstract provided.

Infrared Modulation Using The Field-Effect Properties Of Germanium., Lloyd E. Brunkhorst

Masters Theses

"The absorption of infrared radiation, by free carriers in germanium, has been used to amplitude modulate infrared radiation. In the experiment, a space charge layer consisting of free carriers is established at the inner surface of a germanium sample by using the field-effect technique. Infrared radiation of a wavelength to which the germanium is transparent is then Internally reflected from this surface. The infrared radiation passes twice through the space charge layer for each internal reflection. With each pass through the space charge layer, the amplitude of the transmitted infrared is decreased. Amplitude modulation of the transmitted infrared is accomplished …

Thermocouple Shape Influence On Response In A Dynamic Compressible Fluid Atmosphere, Philip J. Steger

Masters Theses

"This investigation was performed to determine whether the geometrical shape of a thermocouple used to measure the temperature of a dynamic fluid atmosphere had any affect on its recovery factor and time response.

A converging nozzle was used to establish a dynamic fluid stream in which shaped silver solder junctions of copper-constantan thermocouples were tested. The velocity of the working fluid, air, was about 1000 ft/sec at the test point.

The investigation was successful, within experimental limits, in determining that the recovery factor of a bare thermocouple junction is not influenced by geometrical shape The results agreed substantially with available …