Digital Commons Network^™

The Determination Of The Solubility Of Hafnium Oxide In Aqueous Solution By The Radioactive Tracer Technique, Hampden O. Banks

Masters Theses

"To date, there is no information in the open literature concerning the solubility of hafnium oxide in water other than the fact that it is very insoluble. This lack of experimental information is due, partly, to the fact that hafnium is a relatively new addition to the list of known elements"--Introduction, page 1.

Intermolecular Potential Functions For Liquid Argon And Liquid Mercury, Richard H. Kerr

Masters Theses

"The purpose of this research is to obtain such intermolecular potential functions for liquid argon and liquid mercury by use of the experimental radial density functions available for these two liquids over a wide range of temperatures. We shall introduce the notion of a correlation between the motions of atoms in neighboring cells in a cell theory of liquid structure, and derive a theoretical radial density function involving the intermolecular potential function for a pair of atoms in the liquid. This radial density function, or as it is frequently termed, the atomic distribution function, applied to the experimental data should …

Periodic Heat Flow In A Semi-Infinite Solid, Warren George Heidbrier

Masters Theses

"The object of this investigation is to determine by analytical means the temperature within a homogeneous semi-infinite solid, as a function of time, while the solid is receiving heat periodically by radiation on its one flat surface. Periodic heat flow means that heat flow is a continuous function of time and repeats itself at regular intervals. A semi-infinite solid has only one bounding plane and extends to infinity in all other directions...Much of this work deals with the soil temperatures of the earth both at the surface and at various depths. The surface of the earth is subjected to daily …

A Study Of Cast Eutectic Structures By Means Of Optical And X-Ray Microscopy, John Stanton Winston

Masters Theses

"The present research is the result of interest in two rather broad, and at first thought, seemingly entirely separate topics: the structure of eutectics and x-ray microscopy. D. Hanson in 1923 in his correspondence with Albert M. Portevin in regard to his article on the structure of eutectics states, "A point that always stuck him (D. Hanson) in examining eutectics was that one of the constituents always formed a continuous phase round the other one. The orientation of one constituent was either constant or varied in a uniform manner. What, however, was the condition of the 'enveloped' constituent, which formed …

Velocity Studies In A Vertical Pipe Flowing Full, Robert Franklin Tindall

Masters Theses

"The purpose of this investigation is to install a hard drawn copper pipe approximately 1/2 inch in diameter, and approximately 35 feet long in a vertical position. The copper pipe is to have pressure takeoff points at various distances along the length of the pipe. The purpose of these takeoffs is to measure the pressure of the water at the point of takeoff in the pipe. The water is to be forced into the pipe, assisted by gravity, thereby causing a pressure of some measurable quanity [sic] greater than absolute zero pressure. The discharge was to be by volumetric measurement, …

An Experimental Study Of Crystallization In Opal Glass, William C. Rous

Masters Theses

"Opal glasses are well known from use in such forms as ointment jars, lighting globes, wall panelling [sic], and decorative effects in glass vases. Cryolite, fluorspar, and sodium fluosilicate are used in varying proportions in most glasses of this type. Since little is known of the mechanism of crystallization in opal glass, there is a definite need of gathering further information on this subject. This information is of particular interest to the manufacturers whose products consist of this type of glass. Further information would aid in control of the characteristics desired and perhaps would allow a more economical control"--Introduction, page …

A Study Of Missouri Flint Clay, Edmond Preston Hyatt

Masters Theses

"The problem is one of attempting to explain the peculiar nature of Missouri Flint Clay and to expand the knowledge concerning it. Among the questions for which answers are sought are: What makes Missouri Flint Clay so hard? What happens to Missouri Flint Clay when it is ground? What is the mineralogical constitution of Missouri Flint clay?"--Introduction, The Problem, page 1.

The Effect Of Calcium Chloride On Air-Entrained Concrete, Gerard Francis Hofstaedter

Masters Theses

"The essence of the problem is not fully set forth in the title in that all aspects are not covered. In this case, the term "effect" means how the compressive strength and the modulus of elasticity vary with the addition of calcium chloride...Many pages will be found concerning the relative merits of plain concrete versus air-entrained concrete. All phases of the problem have been covered thoroughly. Investigations have been conducted on both plain and air-entrained concrete to determine the compressive strength, flexural strength, durability and workability"--Introduction, page 1.

Separation Of Copper And Zinc On Synthetic Resins, Ernest Joseph Breton

Masters Theses

"It was desired to know whether ion exchange resins could be of value to the metallurgist in the recovery and separation of metals. The recovery and separation of copper and zinc from dilute solutions on Amberlite IRC-50, a carboxylic resin, and Amberlite IR-120, a nuclear sulfonic resin, were investigated. It was found that Amberlite IRC-50 could effectively remove copper ions from a solution of copper and zinc. Amberlite IR-120, due to the strong sulfonic acid groups, exhibited only a slight preference for copper as compared to zinc. It would seem that a judicious choice of resins coupled with appropriate chemistry …

A Determination Of The Surface Tension Of Bismuth, Cadmium, Tin, And Lead, Edward Mckee Chandler

Masters Theses

"Various methods have been employed for the determination of surface tension including capillary rise, drop weight, maximum bubble pressure, sessile drops on flat surfaces, sessile bubbles formed underneath flat surfaces, and the shape of pendent drops. Each method is subject to characteristic advantages and disadvantages. Only two of these will be discussed. The method of maximum bubble pressure allows the formation of a fresh surface for every bubble but does not permit the study of a given sample over a period of time. The sessile drop in direct contrast, allows the observation of the same sample over any period of …

The Reflection Coefficient At The Truncated Corner Of A Rectangular Wave Guide, John Raymond Barcroft

Masters Theses

"The term wave guide refers to a hollow conducting tube (usually of rectangular or circular cross section) filled with a dielectric (or vacuum) and used for the transmission of electromagnetic waves. We shall consider the guide to be bounded by a perfect conductor and to be filled with a lossless homogeneous isotropic dielectric (or vacuum). The electromagnetic wave in the guide must of course satisfy Maxwell's equation. It must also satisfy the boundary condition that there be no tangential component of electric field at the surface of the conductor. If the electromagnetic waves traveling along the guide meet a discontinuity …

A Determination Of The Economic Feasibility Of Producing Marginal Gas Wells, Horace Tharp Mann

Masters Theses

"The purpose of this investigation is to show that it is economically feasible to produce marginal gas wells in such a manner that all the gas from the edge of the field will be captured by the first row of wells. In this problem the permeability of the sand is to be variable but known, and the effects of this variable permeability on the pressure distribution, and resulting gas production, will be discussed.

In many gas fields the point at which it is generally considered unprofitable to drill new wells is well inside the boundary of the reservoir. This is …

Analytical Investigation Of Bending Effects On The Stability Of A Tube Subjected To External Pressure, Charles Young

Masters Theses

"The behavior of thin and moderately thick-walled tubes under various types of loadings has been a major problem of several leading industries for many years. Predominant among these, and the one for which this thesis was primarily undertaken, is the oil industry. The problem attacked in this thesis, however, is not limited to that industry alone, having ample application in industries that are sub-marine in nature, or any industry in which the application of external pressures on equipment is likely to be responsible for buckling failures...In this thesis, the problem of finding the effect of bending on the collapsing pressure …

Calculations Of Maximum Sag Of A Transmission Line With An Ice Load On One Span, Rodney A. Schaefer

Masters Theses

"An important problem concerning electric power lines is the calculation of the maximum sag occurring when there is an ice load on only one span. The object of this thesis is to determine a practical method for calculating the maximum sag of a transmission line, suspended on suspension insulators, with the aforementioned loading conditions. This paper is limited to the case where the supports of the transmission line are at equal elevations and all span lengths are equal"--Introduction, page 1.

The Economic Spacing Of Contraction Joints In Reinforced Concrete Pavements, Wilbert Frederick Wegener

Masters Theses

"Structurally, there are two types of joints used in concrete pavements: (a) the tied, or permanently-closed joint; and (b) the open or free type of joint. The permanently closed joint utilized tie-steel of some form to keep the joint from opening. Usually, this steel is in the form of short individual bars extending across the joint and bonded to both slabs (designated as "tie-bars") or in the form of distributed reinforcement. The remaining method of classification, that of refering [sic] to the joint purpose, gives the expansion joint, contraction joint, and warping joint. An expansion joint is, as the name …

The Theory Of The Specific Heat Of A Body Centered Cubic Lattice, Curtis Cleveland Webster

Masters Theses

"In normal crystalline solids the atoms are at rest in their lattice points at absolute zero of temperature. Increasing the temperature of the crystal increases the motion of the atoms about their lattice points. Approximately, each atom or ion may be treated as a harmonic oscillator. then from the equations of motion of the atoms, by the Born-von Karman theory of specific heats, the normal modes of vibration of the lattice can be expressed as the roots of a secular determinant. Application of this theory to determine the thermodynamic properties of crystals has resulted either in solutions that are inaccurate …

Principles And Practices Controlling The Use Of Earthmoving Equipment, Woodrow John Latvala

Masters Theses

"The purpose of this study is to show how the efficiency in earthmoving projects can be increased by the application of engineering principles. Efficiency can be increased by choosing equipment to fit the given set of conditions; and, having chosen the equipment, operate it at its maximum efficiency. In order to choose the right equipment it is necessary to study the conditions under which the equipment must operate. It is then necessary to study the machine in order to ascertain its adaptability to the existing conditions"--Introduction, page 1.

Efficiency Studies Of The Effect Of Moisture On The Power Consumption Of Mine Scrapers, Georges J. Vigier

Masters Theses

"Many years of practice have resulted in the standardization of several types of scrapers which are now commonly manufactured for use in mining. Although experience has brought out much information on scraping operations, no systematic studies of the efficiency of mine scrapers have been carried out before the experimental works done in the last few years at Missouri School of Mines and Metallurgy. "Purpose of Problem": The purpose of this present study is to consider the effect which moisture in the muck has on the efficiency as regards power consumption and amount of material scraped, of different types of mine …

Economical Span Length Ratios For Three-Span Continuous Girder Bridges, Donald Hindrik Timmer

Masters Theses

"The three-span continuous bridge is one of the most popular bridges used by highway departments at the present time. The low first cost and overall economy combined with the pleasing appearance of this type of bridge as compared to simple span structures has led most highway departments to use continuous spans whenever conditions permit. The design of three-span continuous bridges, as well as the design of any of the other bridge types, is usually carried out as an analysis rather than a design. In the case of the three-span continuous girder, with rolled steel beams, an initial assumption as to …

The Theory Of The Specific Heat Of A Face-Centered Cubic Lattice, Charles Robert Bonnell

Masters Theses

"It is generally accepted that a normal crystalline solid can be pictured at absolute zero as an assembly of atoms at rest arranged at periodic lattice points. Since at higher temperatures each molecule becomes a harmonic oscillator about its lattice point, it is necessary to know the distribution of normal modes of vibration in order to calculate the thermodynamic properties of the lattice...Many approaches have been made to get a simple solution of the problem, but either accuracy is sacrificed for simplicity, or the solutions demand a very considerable amount of labor. The classical theories failed to explain the change …

A Study Of The Efficiency Of Split-Second Delay Electric Blasting Caps In Underground Limestone Mining, John B. H. Fitzwilliam

Masters Theses

"The introduction of electric blasting caps have delay intervals of the order of one-half to one second proved of advantage in many aspects of underground mining, particularly development work. Their use spread, until they now supersede fuse-and-cap firing wherever possible. Split-second delay electric blasting caps are a comparatively recent development from conventional delay caps. They have been found of practicable use in quarrying operations, and have been applied in many phases of underground mining. While evidence, to show that short-delay firing in quarrying is more efficient than instantaneous firing, is becoming increasingly conclusive, it remains to be proved that split-second …

Effects Of Wave Action Upon The Design Of The Breakwater For Istanbul Harbor, Melih Suat Durusan

Masters Theses

"The city of Istanbul is situated on the southern entrance of the Bosphorus which separates Asia from Europe; at the same time it is the only strait that leads to the Black Sea. Istanbul is the city that connects Europe-Asia highways and railways. These features show that Istanbul is a very important port. The Golden Horn and the southern end of the Bosphorus constitute a natural harbor which has been in use for many years. Although the natural harbor has served its purpose in the past, the present conditions necessitate the presence of a new harbor...One economical method of improving …

Separation Of Cobalt From Zinc Sulfate Solutions By Synthetic Cation Exchange Resins, Wen-Hsiang Chang

Masters Theses

"The purpose of the present research is primarily to investigate the possibility of the separation and recovery of cobalt from zinc sulfate solutions by means of cation exchange resins. It is thought that such an investigation, seemingly of academic interest, might throw some light on determining the possibility of processing some industrial solutions containing both cobalt and zinc. Cobalt, for instance, has been well known as one of the most detrimental impurities in zinc electrolytic solutions. In spite of various purification treatments, small amounts of cobalt are often present in the electrolytic solution, causing a reduction in current efficiency and …

Evaluation Of Quenching Media Using The End-Quench Hardenability Test, Subodh C. Das Gupta

Masters Theses

"The purpose of the thesis was to evaluate the quenching speed of different quenching media by studying their behaviour in relation to hardenabilities of steels, using the standard A.S.T.M. End-quench Test. At the outset an understanding of the term "Hardenability", so extensively used in industrial heat-treatment, is necessary, The property of a steel, of hardening on quenching to various depths beneath the surface is referred to as the 'Hardenability". It may simply be called the "susceptibility to hardening". Hardenability should be distinguished from the "Hardening capacity", which represents the magnitude of the hardness achieved. The chief factors which affect the …

The Theory Of Limit Design As Applied To The Design Of A Continuous Beam Over Three Supports, Robert F. Davidson

Masters Theses

"The theory of Limit Design is the application of the theory of Plasticity to the estimation of the actual carrying capacity of a structure. In this theory, as it is applied to statistically indeterminate structures, the areas of most unfavorable stress are allowed to be stressed beyond the yield point and into the plastic range of stress. It was formerly held that, by assuming elastic behavior, all questions of strength of materials that concern the Structural Engineer were capable of solution. However, it is now becoming recognized, from actual measurements of deformations of structures and from tests carried to near …

Reduction Of Zinc Sulphide In A Vacuum, Tien-Shih Liu

Masters Theses

"The successful large scale commercial application of high vacuum for high temperature metallurgical operations is a comparatively new development. The use of Pidgeon and the carbothermic processes for the production of magnesium during the war forced a perfection of both equipments and techniques for high vacuum operations. This opens broadly the way for a great expansion of vacuum metallurgy. Vacuum operation is thus no more a laboratory method - it is a kind of industrial practice. Many metallurgical operations, which cannot be carried out by ordinary processes, are made feasible when conducted in a reduced pressure. typical examples are the …

Design Of A Barge-Platform Marine Drilling Rig, Ely Schwartz

Masters Theses

"ln the quest for oil in the Gulf of Mexico, princi­pally off the coasts of Texas and Louisiana, unique types of drilling rigs able to cope with environmental conditions have been developed in the last several years. This development is highly specialized and has led to methods of operation revolutionary to the oil industry and is without precedent….

In designing a drilling platform there are three cardinal aims (1) low cost installation and operation, (2) ease of operation, (3) providing safe working condi­tions.

The initial problem is to extend the shore-based fabrication and reduce the offshore construction, foul weather delays, …

Plateau Characteristics Of Geiger Counters With Respect To Different Gas Mixtures And Pressures, Ralph E. Lee

Masters Theses

"The section of a Geiger Counter is characterized by the so-called plateau curve. In this curve the counting rate of a given counter is plotted as a function of voltage, when the gas which it contains and the radiation to which it is exposed are both kept the same. These curves are characterized by a rapid rise beyond the starting potential (potential at which the counter begins to respond) until a more or less flat region is reached. This flat region is called the plateau of the curve. The slope and width of the plateau curve are dependent upon the …

The Effect Of The Convection Coefficient On The Temperature Amplitude In Periodic Heat Flow, Gordon L. Scofield

Masters Theses

"The problem to be investigated in this thesis is that of periodic heat flow in a semi-infinite solid. Periodic flow means that heat flow is a continuous function of time and repeats itself at regular intervals. A semi-infinite solid is one which is bounded by one and only one plane. This subject has received considerable attention in the field of soil temperatures, both at the surface of the earth and at various depths. The surface of the earth is subjected to temperature changes which are nearly periodic. These temperature changes take place both daily and annually. A knowledge of these …

The Lithium Tungsten Bronzes, Shun Sheng Hsu

Masters Theses

"The 'tungsten bronzes are a series of anionic substitutional solid solutions of alkali or alkaline earth metal metatungstates and tungstic oxide. They are neither alloys or intermetallic compounds, the term "tungsten bronzes" was adopted because of their remarkable metallic properties -- e.g., high electrical conductivity, metallic luster on the crystal, and high specific gravity. Also owing to their intense and vivid colors and chemical inactivity it was possible to use them in the paint industry as a substitute for the so-called "bronze powders", the latter term is applied to the finely divided metal powders, such as aluminum, copper, brass, and …