Digital Commons Network^™

The Development Of A Device To Replace The Oil Well Dynamometer, Jerry Bernard Overton

Masters Theses

"The mechanical dynamometer is recognized as being a valuable tool in measuring resultant forces acting on the polished rod of an oil well pump. The dynamometer is used extensively to determine loads, torque, and horsepower. "It is also used to determine pump action and trouble-shoot for any seemingly abnormal pumping condition."

Although it is desirous to periodically make dynamometer studies, it is also very time consuming. Because of high labor costs, it has been almost discontinued by many companies. The author became convinced that a less costly method of obtaining the same information could be developed. This method was the …

Operational Characteristics Of A Small Sewage Oxidation Lagoon, Karlheinz C. Muhlbauer

Masters Theses

"With the rapidly increasing population in the United States the adequate disposal of sewage has become one of the major technical problems which the sanitary engineer has to solve. In most areas it is no longer acceptable practice to discharge domestic sewage or industrial waste products directly into streams or lakes because of the resulting pollution of the water, which may later be used for drinking or recreational purposes. Many larger cities have, therefore, adopted some method of sewage treatment which renders such wastes safe and unobjectionable before they are discharged into a lake or stream. Most of these methods …

Methods To Improve The Metallurgy Of Bolivian Tin Ores, Oscar Davila-Michel

Masters Theses

"Tin is a rare element; among the base metals it is one of the rarest. Although it was one of the first metals used by man and has been used since prehistoric time, the ore-dressing and metallurgical methods of tin are inefficient and very wasteful.

The only tin deposits of importance in the Americas are located in Bolivia, South America, and it is in Bolivia that the problems of tin metallurgy are greatest. More than 50% of the tin that is mined in Bolivia is lost in the tailing dumps of the beneficiation plants. In a country where the export …

A Study Of Background In A Long Sensitive Time Wilson Cloud Chamber, Donald A. Rinker

Masters Theses

"A long-sensitive time Wilson Cloud Chamber has been built and tested. A usable sensitive time of 2.5 seconds has been achieved by the use of a system of five expansion valves, the first three of which are used to obtain the sensitive time and the final two to continue the expansion at a supersaturation slightly less than critical in order to allow all droplets formed to grow in size and fall into the liquid. This system of continued expansion, coupled with delayed recompression, has been proved to reduce the background density in the chamber to an average operating value of …

Paragenesis Of The Minerals In The Einstein Vein Madison County, Missouri, Robert P. Stevens

Masters Theses

"Selection of the Problem: The mineralogical problem of determining the paragenetic sequence of minerals in the Einstein vein, Madison County, Missouri, was suggested by Dr. O. R. Grawe, who previously had supervised a thesis by Joel Pomerene dealing with the geology of the area. Although considerable attention has been given to the mineralization along the vein, a specific study of the paragenetic relations has not been made. Paragenesis has, however, been discussed by others in papers dealing with the geology of the area. Such a study is extremely important in the establishment of a hypothesis of origin, and hence, an …

Design Of Distillation Solvent Recovery System, Donald Empson Puyear

Masters Theses

"With the advent or the atomic bomb during the summer of 1945 the opportunity for engineering colleges to provide an integrated course of study in the field of nuclear engineering was presented. This opportunity has been greatly enhanced by a policy of the Atomic Energy commission, granting funds to selected institutions for equipment necessary for successful instruction in this field. The Missouri School of Mines and Metallurgy, realizing the opportunity presented, has established a course of study in nuclear engineering in which the departments of Ceramic, Chemical, Mechanical and Metallurgical Engineering and Physics are taking an active part.

That portion …

Iterative Solutions Of Kirkwood's Integral For Liquid Argon, Eugene D. Fabricius

Masters Theses

"A liquid or a dense gas may be regarded either as a very imperfect gas in which multiple collisions are frequent or as a distorted crystal in which the long range order has been lost. The crystal-like approach has not led to formal solutions, but it has led to several approximate treatments which can be used to give numerical results.

The two main types of approaches which have been used are: the cell theories, in which the liquid is regarded as a distorted crystal with one molecule located at or near each lattice point; and the hole theories, in which …

An Improved Long Sensitive Time Wilson Cloud Chamber, Clarence W. Mettenburg

Masters Theses

"The discovery of numerous new particles in recent years such as mesons and hyperons causes one to speculate about the possible existence of still other particle types….

A cloud chamber seems to be a most suitable means of detecting particles ionizing less than the minimum ionization of the electron because it is capable of detecting almost all the ions produced. The cloud chamber makes it possible to study not only a wide range of ionization but also many fine details of track structure which would go unnoticed by other means of detection….

With the information and experience gained by the …

Investigation Of The Geometric Effects Connected With The U-Effect-Iii, Anthony Edward Hoffman

Masters Theses

"Statement of Problem: The investigation reported herein is of the dependence of the voltage output due to the U-Effect-III upon the geometry of the tube. The geometry of the tube is defined to include the inner diameter of the tube as well as the size and number of the mercury and electrolyte drops. The previous experimental study of the effect did not include an investigation of the effects of the geometry of the tube, as defined above, on the voltage output. It seems that information as to the dependence of the output voltage on the geometry of the tube would …

Temperature Stabilized Transistor Direct Current Amplifier, William Lewis Metcalf Jr.

Masters Theses

"A stable direct current transistor amplifier is difficult to design for use at elevated temperatures. The above is true since transistor parameters and bias conditions are affected by temperature. When transistors are incorporated in direct coupled amplifier circuits, these variations in parameters and bias conditions usually result in unstable operation. It is the purpose of this thesis to investigate this problem and to design a stable direct current transistor amplifier which will operate satisfactorily at elevated temperatures.

This problem is of importance as such direct current amplifier circuits are found in airborne or missile servo systems. In such systems the …

The Development Of Basic Word Lists And Their Use In Teaching Spelling, Nelle Gullett

Masters Theses

No abstract provided.

An Evaluation Of The Selection, Recruitment And Sustaining Interest Of Beginning Band Students Of The Northeast Quadrant, Decatur Public Schools, Decatur, Illinois, Merton L. Johnson

Masters Theses

No abstract provided.

Opportunities For Guidance In The Language Arts Program, Altys M. Daniels

Masters Theses

No abstract provided.

Physical Properties Of Concrete At Early Ages, Karl H. Dunn

Masters Theses

"There are well over 100,000 miles of concrete pavements existing today on our United States highway system. The development of these pavements during the first half of this century has been a process of learning from construction applications and mistakes. However, the unexpected increase in traffic load has brought highway designers to experiment with relatively new types and designs of concrete pavement construction.

Some designers, in an effort to reduce temperature warping stresses, have used short slabs 10 to 15 feet in length, generally unreinforced. Another type of construction is the definitely jointed slabs, the slabs being from 20 to …

A Geological Study Of The Irvine Ranch Area, Johnson And Campbell Counties, Wyoming, Gale E. Butterfield

Masters Theses

"The discovery of uranium in the Powder River Basin, Wyoming, by the U. S. Geological Survey in 1952 has lead to an extensive exploration program throughout the region by both private and governmental agencies. This report is a geological study of an area in the southwestern part of the basin.

Geological and radiometric mapping carried out as a part of this report indicated several areas of uranium occurrence. Some of these occurrences warrant tests by drilling.

Mineralogical and petrographic study has shown the principal uranium minerals to be carnotite and metatyuyamunite. The mineralization occurs in arkosic sandstones. Assays of the …

Internal Friction In Manganese Copper Alloys, William Paul Dixon

Masters Theses

"The study of the physical properties of the manganese-copper alloys is an intriguing one. These alloys show promise of usefulness in instances in which high internal friction is needed to reduce the noise and vibrational stresses at resonant frequencies of a part of a machine. The purpose of this study has been to learn more about the internal friction of manganese-copper alloys as a function of temperature, stress amplitude, frequency, time, and past history of the specimen. From this information the mechanism for absorption of vibrational energy is proposed, or at least some progress has been made toward its determination. …

Investigation Of Length Changes And Warping In Thin Prestressed Pavements, Wilbur D. Stites

Masters Theses

"The present growth of the American highway system presents a staggering problem to the highway designer. The increased and urgent demand for more highways, capable of accommodating traffic loads that are constantly increasing, combined with the increased construction cost of highways, behooves the present day highway designer to envision future highway problems that will arise. These future problems are numerous and complex; however, it seems the primary problem is the selection of a surfacing material that will withstand projected traffic loads with a maximum economy of construction and future maintenance costs. Concrete at the present time is the most satisfactory …

Servomechanism Compensation With An Active Phase-Lead Network, Robert T. Dewoody

Masters Theses

"The problem is to develop a phase-lead compensation network for a servomechanism which will not reduce the low-frequency gain and thus decrease the velocity-lag error. The principal part of this thesis deals with the design of such an active phase-lead network. The active network does not have d-c coupling; this eliminates drift problems.

To illustrate an active phase-lead network a simple second order servomechanism is used as a basis for comparing three methods of compensation.

The first method is compensation with a conventional phase-lead network with a gain decrease. The second method is compensation with a conventional phase-lead network with …

Influence Of Some Metals On The Rate Of Corrosion And Deposition Of Titanium In Molten Salt Baths, Yu-Pu Huang

Masters Theses

"2. The purpose of this investigation. The substances obtained by corrosion of titanium in fused salts, if leached with water and dried, are composed of three kinds of products, namely of black, gray and yellowish ones. The black product was identified by X-ray diffraction as titanium-oxygen alloy with 9-10% by weight oxygen which later was used as coating material instead of the titanium sheet for deposition experiments described previously. The yellowish product was identified as rutile. The grayish product was also rutile but containing some titanium powder. Of these three products only the black one possessed the ability to deposit …

Physical Properties Of Concrete At Early Ages, Curtis E. Weddle Jr.

Masters Theses

"The introduction of the motor vehicle and the subsequent rapid expansion of the highway systems of the United States have brought with them many problems.

The Civil Engineer, in his attempts to provide adequate safe avenues of travel for the populace, has been faced with many problems. Handicapped by the need for speed in design and lack of information of the trends in motor vehicle design, the engineer has been forced at times to utilize design methods inconsistent with good engineering practices.

Of the many types of pavement sections which have been designed in an effort to provide structurally and …

An Investigation Of The Dissolution Of Hafnium-Free Zirconium In Hydrofluoric Acid And The Effect Of Fluoride Additions, Alfred S. Neiman

Masters Theses

"Hafnium-free zirconium has assumed great importance in commercial use in recent years. When economical methods were developed in 1950 to remove hafnium from Zr, a metal was produced which not only exhibited good corrosion resistance and desirable physical properties, but also had a very low absorption cross section for thermal neutrons. Such a metal could obviously be utilized to advantage as a structural material for nuclear reactors. This application is the most important one for Zr at present.

Good corrosion resistance to most mineral acids is one of the outstanding non-nuclear properties of Zr. Hf-free Zr has good corrosion resistance …

Development Of Rating Curves For Concrete Rebound Hammer On Concrete Specimens From Local Aggregates, Rolla Smith Lush

Masters Theses

"Frequently engineers find it imperative to determine the compressive strength of concrete as it exists in a structure. There are two methods of making this determination, either by a destructive or a non-destructive test. The destructive test has the disadvantage of being costly, time consuming, and detrimental to the appearance of the concrete surface. The non-destructive, pulse-velocity, sonic measuring devices used to determine the compressive strength of concrete in the field also have the disadvantage of high cost due to the large initial cost of the equipment.

A relatively new non-destructive testing device has been developed which may replace the …

The Phosphoria Formation Of The Northeastern Big Horn Basin, Wyoming, William A. Beatty

Masters Theses

"Purpose and Scope. — The Phosphoria formation of the northern Rocky Mountains of the United States has received considerable attention from geologists because of its important reserves of phosphate and petroleum. In the Big Horn Basin of Wyoming, however, still more work is needed to compile the information necessary for a complete understanding of the facies changes exhibited by this formation.

The purpose of this paper is two-fold: first to present a description of the lithology and the paleontology of the Phosphoria formation in the northeast part of the Big Horn Basin, and secondly to show the stratigraphic relationship of …

A Probe For Measuring Ultrasonic Pressures, Robert F. Rohrer

Masters Theses

"In the study of acoustics, the term ultrasonics is defined as those wave motions that have frequencies greater than about 20,000 cycles per second. The characteristics of a sound wave at any point in a medium can be regarded as completely defined when the amplitude, frequency, and phase of its Fourier components are known.

Sound measurements at their best are difficult. In the last few years sensitive linear microphones and electronic amplifiers have become available. Still, there are two difficulties of prime importance with their use in a sound field. First, there is the precise, absolute calibration of the equipment …

Statistical Analysis Of X-40 (Stellite-31) Production Blends., Edward P. Patterson

Masters Theses

"An investigation was undertaken to statistically analyze the data obtained on X-40 (Stellite 31) production blends which were tested to the requirements of AMS 5382. For our purpose a blend is one or more furnace heats, the shot of which has been thoroughly mixed to produce greater uniformity of product. The mixed shot is charged to the arc furnaces and cast into parts, and test specimens. A great range of test results have been obtained in testing blends, and it was felt that a statistical analysis of a few of the variables might yield information which could be applied toward …

A Determination Of The Sonic Modulus Of Early Age Concrete, William Dale Nelson

Masters Theses

"The problem which the writer is analyzing in this thesis was suggested by Professor E. W. Carlton of the Civil Engineering Department. It is a determination, by use of sonic testing equipment, of the growth in the sonic modulus of early age concrete.

Since 1938 when T. C. Powers published his paper, "Measuring Young's Modulus of Elasticity by Means of Sonic Vibrations", in the proceedings of the American Society of Testing Materials, Vol. 38, Part II, a great deal of work has been done on the applications of sonic testing of concrete. It began a new era in concrete testing, …

A Comparative Determination Of Weld Shearing Values In Welded Wire Reinforcement Fabric, Ernest Charles Kobs

Masters Theses

"At the suggestion of Professor E. W. Carlton, Chairman, Civil Engineering Department, Missouri School of Mines and Metallurgy, the author selected as subject for research thesis, “A Comparative Determination of Weld Shear Values in Welded Wire Reinforcement Fabric”.

In 1948, the Wire Reinforcement Institute initiated a research program to measure the actual stresses, including weld shear stresses, that occur in Welded Wire Fabric when used as reinforcement in a concrete slab. A great majority of this research was under the supervision of Professor Carlton.

The results of these investigations indicated a wide variation in strength of welds. As a means …

Historical Fiction In The Teaching Of World History, Helen Bernice Lobdell

Masters Theses

The Problem

I. Intent. The purpose of this study is two-fold. The first is to survey historical fiction with a view to the selection, on the basis of established criteria, of readings which would be suitable for use in a senior high school course of study in world history. The second purpose is to determine certain periods as recognized by teachers of world history in which such literature is readily available.

An Evaluative Study Of The East-Alton Wood River Business Education Curriculum, Richard Leroy Olmstead

Masters Theses

No abstract provided.

Controversial Issues In The Junior High School, John A. Dively

Masters Theses

No abstract provided.