Digital Commons Network^™

A Study Of The Effect Of The Crystal Orientation On The Internal Friction Of Magnesium Single Crystals., Robert Ray Nothdurft

Masters Theses

"The method of growing, etching, and cutting magnesium single crystals is described in some detail. Ten single crystals of magnesium of different orientations were prepared and studied. The internal friction and relative Young’s modulus were measured for each specimen as a function of applied stress on a quartz composite oscillator. The effect of the orientation on the strain amplitude independent decrement, the strain amplitude dependent decrement and the ratio of the strain amplitude dependent decrement to the relative Young's modulus is compared to the theory of the pinned dislocation model of Granato and Lücke"--Abstract, p. ii

Thermal Resistance Of Bonds And Contacts, David Marion Lewis

Masters Theses

"The adhesive and sealant Industry has more than kept pace with our rapidly expanding technology of today. This growth has left the standardization of data on adhesives far behind and lack of this data is obvious. Of the many applications, particularly as related to space technology and energy conversion, the resistance to the flow of heat offered by the bond layer is of considerable importance.

Little information is available on the effect of adhesives on heat transfer. In connection with their work on honeycomb panels, Rankle, Gier, and Bevans (7) determined the thermal resistance of the particular type of adhesives …

The Effect Of Cation Size Of Xanthate Collectors In Sulphide Flotation., R. W. Bourne

Masters Theses

"Batch flotation tests on Utah Copper ore were used to show the effect of collector cation size.

The results obtained were:

(1) Recovery of copper in the concentrate decreases with increase in the size of the collector cation.

(2) Increased recovery with ethyl over that for amyl with a given cation.

(3) No beneficial recovery with sulphur enriched xanthates.

Statistical techniques were used to ascertain if significant differences in results were present"--Abstract, p. i

Analysis Of Space Frames By Moment Distribution., Ting-Hwa Wang

Masters Theses

"This work presents an analysis of space frames and planar frames loaded in different planes by the method of moment distribution and the theory of superposition. From this analysis it is found that the torsional stiffness of frame members has a great effect on the final bending moments when twisting moments are applied to the frame. The analysis of space frames considering the forces, stresses, and moments in all three dimensions always yields a design more accurate and economical in material than the traditional planar frame analysis"--Abstract, p. i

Ground Magnetic Study Of The Anderson Ridge Quadrangle, Fremont County, Wyoming., Roland Lee-Ping Chen

Masters Theses

"The Anderson Ridge quadrangle is comprised of folded and faulted schist intruded by granitic, pegmatitic and basic igneous bodies. A ground magnetic survey was conducted using a torsion balance Radar Magnetometer of 15.5 gammas sensitivity to measure the vertical intensity variations. The results are presented on eleven profiles with accompanying generalized geologic cross-sections, two magnetic contour maps of 50 gamma interval, one with traverse line geologic control, and the second controlled by a geologic map of the area. A clear relationship exists between the vertical magnetic intensity distribution pattern and the known areal geology.

The susceptibility of the most common …

A Study Of The Phase Behavior Of Carbon Dioxide-Methane-Normal Decane Systems, Raja Audi Mansoor

Masters Theses

“The effect of carbon dioxide concentration, on solubility has been studied for several carbon dioxide-methane-n-decane systems. Experimental results were obtained using differential vaporization tests. Computational results were obtained using equilibrium constants.

The relation between solubility, bubble point pressure and solution carbon dioxide is presented. A ternary diagram showing the bubble point pressure behavior as a function of system composition is also presented”--Abstract, page ii.

An Investigation Of The Sensitized Fluorescence Of The Mercury-Sodium And The Cesium-Rubidium Systems., Joseph Edward Hueser

Masters Theses

"The experimental apparatus and techniques used for the study of sensitized fluorescence are discussed. In this study both glass and metal absorption cells were employed. Included also is a discussion of the transitions which 11 occur in the mercury-sodium and the cesium-rubidium systems, which were the two systems investigated. Both photographic and photometric techniques were used as means of detecting the sensitized fluorescence. The actual experimental apparatus used are discussed together with conclusions to be drawn and recommendations to be made from the individual experiments. The purpose of the experiments was to better understand the energy exchange processes in a …

The Design, Construction, And Evaluation Of A Vortex Stabilized Plasma Generator, Ronald Ray Williams

Masters Theses

“This report presents the design, construction, and evaluation of a vortex stabilized arc plasma generation facility operating on argon.

The facility consisted of five basic systems; the plasma genera- tor, the electrical power system, the argon flow system, the cooling system, and instrumentation.

The facility was designed to meet four general requirements; stable arc operation, low electrode deterioration, low cost of construction, and provisions for determination of the operating characteristics and thermal properties of the plasma.

Experimental results obtained in the laboratory agreed well with the design conditions. The rate of energy dissipated in the electric arc varied from 7. …

Synthesis Of Unity-Gain Rc Networks From Second Degree Transfer Functions., Ronald L. Mcnally

Masters Theses

"A synthesis procedure is presented which realizes second order open circuit transfer functions. This procedure is developed using parallel networks. The transfer functions for each parallel network are obtained by use of separation parameters. Two constraints are used in the development: first, the realized network must be an RC network; second, the desired multiplicative gain constant must be realized. With these constaints a parameter space is developed which aids in the selection of the proper parallel networks to be combined. Necessary and sufficient conditions are developed which are used to test the transfer functions. The realization simply consists of the …

Zirconium Chloride Nuclear Battery, Lonnie J. Shalton

Masters Theses

"An investigation of the neutron absorption characteristics of zirconium chloride was made to verify the reports of Chicago Development Corporation (5810 47th Ave., Riverdale, Md.) that ZrCl Blight be used as a power source for a nuclear battery. The company detected what they believed to be a beta current when the ZrCl was bombarded with neutrons from a slightly enriched uranium source. Investigation using higher powered neutron sources revealed that such a current was highly improbable and the company incorrectly interpeted the phenomena. Reports in the literature also confirmed that an electric current from the ZrCl using a low powered …

A Preliminary Study Of The Controlled Crystallization Of A Bottle Glass., Narayan M. Sedalia

Masters Theses

The effect of addition of Ti0₂ as a nucleating agent was studied with a bottle glass composition of 74 weight percent Si0₂, l percent Al₂O₃, 5.4 percent Cao, 3.7 percent MgO, 15. 3 percent Na₂O, and 0.6 percent K₂O as a base or original composition. The addition of titanium dioxide ii varied from 3 to 20 weight percent. The composition of this bottle glass was changed by increasing the following ingredients and keeping the other ingredients in the same ratios:

1. Increased 5 weight percent of Al₂O …

Compaction Characteristics Of Fine Grained Soils., Lewis Clyburn Sowell

Masters Theses

"The existing theories of compaction of soi Is are reviewed. The effect of varying the compactive effort on dry density, optimum moisture content, and compressive strength for three fine grained soils is investigated. These samples consist of si I ty clay (CL), plastic clay (CH), and loess (ML). The test results indicate that compactive effort has an important effect on the shape of the moisture density curve and that a potential for over compaction increases with a higher plastic index and c l ay content. At water contents above the Standard AASHO optimum value, the compressive strength is not appreciably …

Theoretical Investigation Of Steam Jet Cleaning, Jaswant T. Lotwala

Masters Theses

"Steam cleaning methods are used by industries to remove mass of dirt and grease deposits from machine parts and other surfaces. It is necessary to know the rate at which this mass can be removed from a surface. The present investigation was made to determine this rate of mass removal. The mass transfer rate is influenced by two phenomena; namely, heat transfer and momentum transfer. Both of these were discussed and the results obtained from the analysis were used in determining the total mass transfer rate. The effects of various parameters, such as density and velocity of the cleaning fluid, …

High Order Bang Bang Control System., Shing-Chou Pi

Masters Theses

"The problem undertaken in this thesis is to find a representation of a nonlinear controller to minimize the response time of a limited input plant whose transfer function has N negative real poles. The extension of the phase-space method to automatic control systems described by high-order differential equations with a general high-order input is considered.

The design utilizes a maximum effort controller whose switching time is determined by the concept of switching hypersurfaces of the system in N-dimensional phase space and the concept of a distance function, which is & geometric length between the initial state point and the switching …

Construction And Test Of Equipment For Use In Ultrasonic Pulse Echo Studies., Charles Joseph Reinheimer

Masters Theses

"An ultrasonic pulse generator was constructed with a variable pulse width ranging from 4 microseconds to 10 milliseconds and a repetition period varying from 15 milliseconds to 5 seconds. The oscillator had an almost continuous range from 500 kilocycles to 18 megacycles per second.

Its applicability in studies of internal friction of metals was demonstrated with a single crystal aluminum sample"-- Abstract, p. vi

Velocity And Kinetic Energy Distribution Of A Submerged Jet., Patrick Shepard Couch

Masters Theses

"The velocity distribution in a cylindrically bounded region of water induced by a submerged axisynnnetric jet of water, has been investigated. Velocity profiles at successive levels were constructed. The continuity equation was shown to be only approximately verified by the velocity profiles.

The kinetic energy for each level was computed and given mathematical expression"-- Abstract, p. 2

Stiffness Of Lightweight Reinforced Concrete Beams, Rameshchandra H. Patel

Masters Theses

"This work is a presentation of the findings of an experimental measurement of stiffness (El) for reinforced and nonreinforced lightweight and normal concrete. The experimental values of stiffness are compared with values obtained using standard reinforced concrete theory. In all, thirty beams, fifteen for lightweight and fifteen for normal concrete, each having the compressive strength of approximately 4, 500 psi, were tested. In addition to stiffness measurements, a relationship was obtained between the dynamic modulus of elasticity and the ultimate compressive strength at various ages for the particular lightweight concrete used"--Abstract, page ii.

Mass Transfer To Droplets: Effect Of Non-Newtonian Continuous Phase., Hsin Chih Wu

Masters Theses

"Since non-Newtonian fluids are frequently encountered in the chemical and process industries, it is important that the transport processes which are commonly encountered be thoroughly investigated. Although studies of fluid mechanics and heat transfer with these fluids have been reported, virtually no work has been reported in the study of mass transfer. This is particularly true of mass transfer in turbulent flow.

The purpose of this investigation is to study the liquid-liquid mass transfer phenomenon in turbulent flow associated with single droplets in non-Newtonian continuous phases. The results are compared with those obtained in Newtonian systems. The data obtained will …

Influence Of The Heat Release On Thermodynamic Characteristics Of Diesel Engines., Shirish Amritlal Desai

Masters Theses

"A Diesel. engine is an internal. combustion engine in which the fuel. is ignited by the heat of compression. Thus, the Diesel. engines are known as compression-ignition (C.I.) engines. The engine received its name: from its inventor, Dr. Rudolf Diesel., who in 1893 published a book under the title, '' Theory and Construction 0£ Rational. Diesel Engine". The first successf'u1 Diesel. engines, using liquid: fuel., which was injected into the cylinder by a blast of high-pressure air, were manufactured by the M.A.N. Company of Germany in 1895"-- Introduction, p. 1

Artifact Filter., Kent William Swearingen

Masters Theses

"Peripheral blood pulse monitors are highly susceptible to noise-artifact-- in their present stage of development. The purpose of this thesis is to demonstrate a feasible means for filtering the artifact, using existing monitors. Since no peripheral pulse monitor (transducer) was available for experimentation, a simulated test input was devised with frequency variations from JO cycles/minute to 1.50 cycles/minute.

The filtering circuit predicts the time location of each input pulse. The location of the prediction is governed by the accuracy of the preceding prediction. This is controlled by an R-C timing circuit with a Schmitt Trigger and relay.

From the data …

Development Of A Fluor-Mica Dielectric Using Glass-Ceramic Fabrication Methods., James Joseph Tuzzeo

Masters Theses

"A tetrasilicic fluor-mica, K₂Mg₅si₈o₂₀F₄, was synthesized using glass-ceramic fabrication methods. Bubbles, rods, and disks of glass-mica were formed, and heat treated at selected temperatures between 620°c and 1160°c for various time periods. Density changes were correlated to mica content to determine the relative amounts of crystalline mica phase precipitated after heat treatment. Dielectric losses and dielectric constants of the glass-mica disks were measured for correlation to mica content"--Abstract, p/ ii

Real Time Testing With A Time Scaled Analog Computer., Wayne F. Balsman

Masters Theses

"A present limitation to the testing of a physical subsystem within an analog simulation is that the analog computer must compute in real time. If it is necessary to time scale the simulation of the complete system, a physical subsystem of the complete subsystem may not be tested within the simulation. Therefore, a means of changing the time scale of the analog signal is needed to test a physical subsystem within a time scaled analog computer simulation.

In this thesis a means of time conversion by sampling the analog signal at one rate, storing the samples, and reading the samples …

The Effect Of Matrix Condition In The Solution Of A System Of Linear Algebraic Equations., Herbert R. Alcorn

Masters Theses

"The solution of a system of linear non-homogeneous equations may contain errors which originate from many sources. A system of linear equations in which small changes in the coefficients cause large changes in the solution is unstable and the coefficient matrix is ill- conditioned .

The purpose of this study is to define several measures of matrix condition and to test them by correlation with a measure of the actual errors introduced into a system of equations.

The study indicates that three of the five measures of condition tested were reliable indices of the magnitude of error to expect in …

The Effect Of Gap Graded Aggregate On The Properties Of Hot Mix Asphaltic Concrete, Maurice L. Northcutt

Masters Theses

"The objective of this investigation was to determine the effects of deviations from the recommended gradation of aggregate upon asphalt concrete mixes. The aggregate used in this study was a good grade Missouri Limestone and was mixed with an asphalt cement of 85-100 penetration grade. A control mix was designed in accordance with the Marshall Method using a gradation recommended by the Asphalt Institute. Ten aggregate blends were prepared by wasting certain fractions or combinations of fractions and the wasted weights were redistributed into the coarser or finer aggregate sizes. The test mixes were designed using the same method and …

The Importance Of Radiation As A Means Of Controlling Surface And Internal Temperatures Of A Semi-Infinite Solid, Kenneth C. Woodruff Jr.

Masters Theses

"This problem is concerned with the temperature history of a semi-infinite solid bounded by one flat surface.

Heat was applied by convection from a hot fluid to the flat surface of the solid which was originally at a uniform temperature. Heat was radiated from the flat surface to black space and conducted into the solid according to Fourier's law. The temperature at the surface, and at several points beneath the surface, was determined as a function of time.

A method for solution of such a problem is demonstrated here by the use of numerical analysis and the Royal McBee LGP …

Investigation Of The Effect Of The Wall Thickness On The Residual Stresses Developed In Thick Wall Cylinders Due To Water Quenching From The Outside Surface., Ghanshyam Chandubhai Patel

Masters Theses

"This investigation has been made to determine the residual stresses in thick wall cylinders by the use of strain gages.

The cylinders were quenched from their outer surface i n water from a temperature of 1000°F, and the resulting residual stresses were determined by Sachs boring-out method. The effect of the wall thickness of the cylinders on the residual stresses and the error developed due to the boring operation were discussed"--Abstract, p. ii

Densification Studies Of Three-Component Refractory Grog Systems., Jerome Dale Patterson

Masters Theses

"The bulk density and crushing strength properties of three-component refractory grog systems that were formed by mechanical impact or by mechanical vibration were determined.

Aqueous alkali silicate solutions of various types, concentrations, and amounts were investigated as room temperature binders for these grog systems. Compositions having maximum bulk densities were determined for each of six different three-component refractory grog systems. The densification rate curves for systems formed by mechanical impact were determined"--Abstract, p. ii

A Determination Of The Theoretical Stresses In A Deep Beam., James William Tritz

Masters Theses

"This paper presents an analytical solution of the stress distribution in a deep beam of finite length. The beam being considered is analyzed as one of plane stress. The method employed superimposes two stress functions each of which is a trigonometric series. The first stress function satisfies all boundary conditions except that of zero stress on the vertical faces. The second function is found, so that, when combined with the first function, all boundary conditions are satisfied. The IBM 1620 digital computer is then used to find the stresses for a particular beam. The results of this analysis are then …

The Prediction Of The Thermal Conductivity Of Various Binary Non-Polar Gaseous Mixtures., Chester Foon-Chen Feng

Masters Theses

"A simple method for predicting the thermal conductivity of binary non-polar gaseous mixtures from the force parameters of the pure components and composition was developed. The method is an extension of the application of the combining methods previously derived for viscosity predictions. Altogether, the published thermal conductivities of 683 binary non-polar mixtures at various temperature levels were compared with the corresponding calculated thermal conductivities resulting from the prediction method. The corresponding values predicted from Hirschfelder, Curtiss and Bird's expression were also compared.

Among the 683 binary mixtures, there were 138 di-di, di-poly, and poly-poly mixtures, 241 mono-

The Electrical Analogy Of Critical Speed For The Transverse Vibrations Of A Shaft With One, Two And Three Masses, Ashok Z. Patel

Masters Theses

"The object of this thesis is to determine the critical speed of a shaft by an electrical analogy. The shaft considered is of constant diameter and is simply supported at the ends by fixing it in self aligning bearings. The weight of the shaft is assumed to be proportionally distributed in the attached masses.

The original system is first of all converted to an equivalent simple spiring mass system by calculating the influence coefficients and hence frcan these determining the spring constants. The spring mass system obtained is then converted to an equivalent electrical circuit.

A sine-square wave frequency generator …