Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Masters Theses

Discipline
Institution
Keyword
Publication Year
Publication Type

Articles 6541 - 6570 of 7904

Full-Text Articles in Entire DC Network

Effect Of Artificial Roughness On Convection, Lee W. Burford Jan 1966

Effect Of Artificial Roughness On Convection, Lee W. Burford

Masters Theses

"Considerable work has been done in recent years, and is still being done, to find ways of increasing the heat transfer rate in fluid heat exchangers. One particular type of potential heat exchanger that has been studied analytically, as well as experimentally, is the use of artificially roughened tubing.

The test sections used in this experiment consisted of four aluminum pipes, three of which have been artificially roughened internally by machining ninety- degree V-shape grooves along the axis of the pipes. The grooves were 30/1000, 60/1000, and 90/1000 inches in depth. The remaining pipe was a smooth test section with …


Comparison Of Plastic Stress-Strain Material Properties As Determined From Conventional Experiments, Wen Mo Chen Jan 1966

Comparison Of Plastic Stress-Strain Material Properties As Determined From Conventional Experiments, Wen Mo Chen

Masters Theses

"In problems of engineering design, it is usually assumed that the stress-strain diagrams of a given material, as obtained from different loading conditions, are the same. In fact, by using the classical theory of plasticity, it can be shown that, with an appropriate selection of stress and strain related parameters, the diagrams should coincide.

Three different materials - magnesium, aluminum and steel, have been tested under tension, compression, torsion and bending loads. Stress-strain diagrams were constructed from these observations. This thesis presents an analysis of the relative agreement between the theoretical and experimental results of these materials"--Abstract, page i.


Catalytic Effects On Radiation-Induced Polymerization Of Methyl Methacryalate, David E. Bartine Jan 1966

Catalytic Effects On Radiation-Induced Polymerization Of Methyl Methacryalate, David E. Bartine

Masters Theses

"A study has been made of the effect of Kaolin clay particle size and acidity on the degree of radiation-induced polymerization of methyl methacrylate. The results indicate that the degree of polymerization varies with the clay particle size, and that the amount of polymer produced is influenced by the pH of the clay"--Abstract, page ii.


The Performance Of A Countercurrent Extraction Column With Vibrated Packing, Mehmet Uran ÖZsoy Jan 1966

The Performance Of A Countercurrent Extraction Column With Vibrated Packing, Mehmet Uran ÖZsoy

Masters Theses

"The performance of a continuous countercurrent extraction column with a packing -- that could be vibrated vertically at various amplitudes and frequencies by a variable speed motor -- was investigated under both non-flooding and flooding conditions using the high interfacial tension benzene-acetic acid-water ternary system. In all the experimental runs, which were sequenced randomly with a full-factorial experiment design, mass transfer of the solute (acetic acid) from the aqueous to the organic phase was studied. Column performance was evaluated in terms of the height of an overall transfer unit, HTU, based on the benzene phase. The variables studied were: amplitude …


A Study Of The Effect Of Magnetite Additions To Shell Molds On The Surface Quality Of Low Carbon Steel Castings, Robert C. Tooke Jan 1966

A Study Of The Effect Of Magnetite Additions To Shell Molds On The Surface Quality Of Low Carbon Steel Castings, Robert C. Tooke

Masters Theses

"Shell molds containing additions of ten to fifty percent magnetite, Fe3O4, of various particle sizes were cured by induction heating. For comparison, regular shell molds were made using silica and zircon sand. Low carbon steel was cast into all of the molds.

Castings produced from the regular shell molds exhibited poor surfaces due to mold expansion. Magnetite additions eliminated the expansion defects from the casting surfaces.

Excellent surfaces were obtained on the low carbon steel castings with proper selection of the magnetite particle size and the percent of magnetite added. Improper combinations of size and amount …


Two-Dimensional Seismic Model Studies, Joong Hee Chun Jan 1966

Two-Dimensional Seismic Model Studies, Joong Hee Chun

Masters Theses

"The purpose of this research was to design and construct apparatus suitable for two-dimensional seismic model studies.

A new technique for two-dimensional seismic model testing was devised which allows wide application of the equipment. This enabled the author to place the source and receiver in any desired position on the model, thereby permitting the recording of seismic events as function of distance and depth at any position

Two simple geometric models were tested to demonstrate the experimental range of the apparatus designed. The recorded data were compared with theoretical predictions and were found to be in good agreement"--Abstract, page ii.


Nucleate-Boiling Heat Transfer To Water At Atmospheric Pressure, H. D. Chevali Jan 1966

Nucleate-Boiling Heat Transfer To Water At Atmospheric Pressure, H. D. Chevali

Masters Theses

"The purpose of this investigation was to study the hysteresis effect, the effect of micro-roughness and orientation of the heat-transfer surface, and the effect of infra-red-radiation-treated heat-transfer surfaces on the nucleate-boiling curve.

It has been observed that there exists no hysteresis effect for water boiling from a cylindrical copper surface in the nucleate-boiling region over the range studied. The nucleate-boiling curve has been found to be independent of micro-roughness and orientation of the heat-transfer surface. There was no detectable change in the nucleate-boiling characteristics of the heat-transfer surface when the surface was treated with infra-red radiation"--Abstract, page ii.


Correlation Of Drag Reducing Data In Dilute Polymer Solutions, Jorge Mario Rodriguez Jan 1966

Correlation Of Drag Reducing Data In Dilute Polymer Solutions, Jorge Mario Rodriguez

Masters Theses

"The purpose of this investigation was to obtain a correlation for drag reducing solutions in circular tubes under turbulent conditions. Data were taken for three polymer-solvent systems: polymethyl methacrylate V-100 (Mv ~ 110,000) in toluene, polyisobutylene L-200 (Mv ~ 4,700,000) in toluene, and polyisobutylene L-200 in cyclohexane. The data from the two polyisobutylene systems, together with other data on polymethyl methacrylate G (Mv ~ 1,500,000) in toluene and polyisobutylene L-80 (Mv ~ 860,000) in cyclohexane, were used to attempt to obtain the correlation. The V-100 solutions were not used because they were not drag reducing.

The …


The Anodic Oxidation Of Crotonic Acid In Basic Solutions, Richard C. Porter Jan 1966

The Anodic Oxidation Of Crotonic Acid In Basic Solutions, Richard C. Porter

Masters Theses

"The purpose of this study was to investigate the anodic oxidation of crotonic acid in basic solutions. Potassium hydroxide solutions of pH 12.3 and KOH-K2CO3 solutions of pH 11.5 and 10.5 were used. The investigation was carried out on platinized-platinum anodes at 80°C.

Experimental studies were conducted to determine the effects of crotonic acid concentration, pH, and temperature on the current. Faradaic efficiency was determined by analysis of CO2 produced and was approximately 100 per cent.

The results were interpreted in terms of a mechanism having the following characteristics:

  1. The first electron transfer is the rate …


The Effect Of Concentration On The Viscosity Of Polyisobutylene Solutions, Lung-Yu Chou Jan 1966

The Effect Of Concentration On The Viscosity Of Polyisobutylene Solutions, Lung-Yu Chou

Masters Theses

"In the past twenty years the viscosity of dilute polymer solutions (i.e., where the solute molecules are far apart) has been investigated in great detail, both theoretically and experimentally. The viscosity characteristics of such systems are well-understood.

Only a few studies have been made of the effect of concentration on the viscosity of polymer solutions in the concentration range where the polymer molecules begin to overlap. This range of concentrations is important in practical applications such as dry spinning of fibers, cross-graded automotive motor oils and in many industrial formulations where polymers are used to thicken solvent vehicles. Development of …


A Procedure For Analysis Of Three-Segment Symmetrical Balcony Beams, Ronald A. Hansen Jan 1966

A Procedure For Analysis Of Three-Segment Symmetrical Balcony Beams, Ronald A. Hansen

Masters Theses

"A procedure for analysis of three-segment symmetrical balcony beams unsymmetrically loaded was derived whereby the normally complicated energy solution is eliminated. A moment distribution technique is used in the solution of the first and second phases of the problem. Tables are given to aid in determining the proper distribution factors. Due to the complexity of the third phase, a table of solutions is given for varying values of length, geometry, etc.. An example problem is also given demonstrating the use of interpolation within the tables"--Abstract, page ii.


Origin And Factors Affecting Distribution Of Solid Oil In Mid-Western Missouri, Rafid Abdul-Halim Jasim Jan 1966

Origin And Factors Affecting Distribution Of Solid Oil In Mid-Western Missouri, Rafid Abdul-Halim Jasim

Masters Theses

"A textural analysis was made of the heavy oil-bearing sandstones in the Middle Pennsylvanian (Desmoinesian) Warner and Bluejacket formations of mid-western Missouri in order to determine and compare their depositional environments.

Grains of the Bluejacket sandstones are smaller and more rounded than grains of the Warner sandstones. The Bluejacket sandstone is also better sorted than the Warner sandstone.

The Bluejacket sandstone is thin-bedded; the Warner is mostly massive-bedded. These differences in bedding between the two formations have affected distribution of oil in the area of study.

Both the Bluejacket and Warner sandstones are better sorted than the Warrensburg sandstones; the …


An Investigation Of The Limitations Of The Antenna Range At The University Of Missouri At Rolla, Ronald Earl Nelson Jan 1966

An Investigation Of The Limitations Of The Antenna Range At The University Of Missouri At Rolla, Ronald Earl Nelson

Masters Theses

"The University of Missouri Antenna Range is described and criteria on range components for acceptable operation are discussed. Discussion of the results of an experimental investigation of component systems of the antenna range is presented. Experimental results are compared to criteria for acceptable operation and recommendations for the improvement of the facility is made. Suggestions are made as to its usage at higher frequencies"--Abstract, page ii.


A Study Of Sedimentation In A Well Regulated Major Drainage Basin - The Monongehala, Allegheny And Upper Ohio Rivers, William S. Wood Jan 1966

A Study Of Sedimentation In A Well Regulated Major Drainage Basin - The Monongehala, Allegheny And Upper Ohio Rivers, William S. Wood

Masters Theses

"This investigation is concerned with the study of various programs employed in reducing and controlling sediment. The measures employed by the U.S. Soil Conservation and Forestry Services to control and reduce erosion, the primary source of sediment, was studied. The flood control and river navigation structures constructed and operated by the U.S. Army Corps of Engineers and the effect of these structures on sedimentation was also evaluated. State and local community regulation and control of exploited natural resources was studied to determine their influence on the generation and control of sediment.
The Allegheny, Monongehala and upper Ohio River Drainage Basin …


A Periodic Dielectric Rod Antenna, Robert C. Peirson Jan 1966

A Periodic Dielectric Rod Antenna, Robert C. Peirson

Masters Theses

"The periodic dielectric rod antenna structure under consideration consists of identical dielectric rod sections of radius a meters situated on a common axis. These sections are of length 11 meters and are separated in free space by distance 12 meters.

Field analysis employing Floquet's theorem, in terms of the exemplary TM01 circular mode, gives expressions for the various field components and an eigenvalue equation. Digital solution of this eigenvalue equation establishes the location of propagation bands as a function of frequency. Such bands are characteristic of any periodic wave guiding structure."--Abstract, page ii.


Analog Simulation Of The Voigt Solid, Richard F. Pohl Jan 1966

Analog Simulation Of The Voigt Solid, Richard F. Pohl

Masters Theses

"A method of reducing a mixed partial differential equation with boundary conditions to a form suitable for programming on the analog computer is developed. Presented along with the computer program set up to be used on the EAI TR-48 analog computer is a systematic check procedure to indicate possible computer malfunctions and programming errors. The results of the computer simulation are presented and supported with observed data"--Abstract, page ii.


Location Of Maximum Moments In A Continuous Two Span Beam Due To Moving Loads, Thomas Houng-Yn Yang Jan 1966

Location Of Maximum Moments In A Continuous Two Span Beam Due To Moving Loads, Thomas Houng-Yn Yang

Masters Theses

"The objective of this investigation is to determine the positioning of vehicle wheels so as to cause maximum positive and negative moments in a two span continuous girder. Several variables are considered, namely, the ratio of loads to each other, the distance between wheels, and ratio of one span length to the other. The necessary equations are derived and the results, after being programmed on a computer, are shown in a series of curves.

These curves serve as a tool for the designer, enabling him to arrive at design moments by simple substitution in the appropriate moment expression, within the …


An Algorithm For The Synthesis Of Nand Logic Networks Using A Diagrammatic Approach, Donald Robert Nelson Jan 1966

An Algorithm For The Synthesis Of Nand Logic Networks Using A Diagrammatic Approach, Donald Robert Nelson

Masters Theses

"A diagrammatic approach is presented for the synthesis of multilevel NAND networks realizing combinational logic expressions. The network synthesized is restricted to only uncomplemented inputs. The synthesis algorithm involves the determination of minimum sum of products and product of sums expressions for a Boolean function, construction of an α-ß diagram from these expressions followed by implementation with NAND gates directly from the diagram. The resulting network is a minimal or near minimal NAND gate realization of the given function. The algorithm is applicable to completely or incompletely specified Boolean functions and is extended to include NOR synthesis"--Abstract, page 2.


A Nonlinear Sampled Data Feedback Control System Employing Pulsed Thrust Position Control, John D. Corrigan Jan 1966

A Nonlinear Sampled Data Feedback Control System Employing Pulsed Thrust Position Control, John D. Corrigan

Masters Theses

"This thesis shows that reaction jet thrust pulses, each of constant amplitude and time duration, in conjunction with sampled data error information can provide satisfactory position and/or attitude control for space vehicles.

Incremental phase-plane analysis of the system yields a technique for determining system response and suggests a means of compensation. Control system response for the vehicle under the influence of external forces is shown to be satisfactory by digital computer simulation"--Abstract, page ii.


Phase And Amplitude Distributions Of An Unsymmetrically Fed Ground Plane Aperture, Leslie Blumberg Jan 1966

Phase And Amplitude Distributions Of An Unsymmetrically Fed Ground Plane Aperture, Leslie Blumberg

Masters Theses

"An anechoic chamber for use in the B-12 KHz range was designed and built for the purpose of obtaining the far field patterns of antennas and radiation systems. This chamber was evaluated and compared with various types of anechoic chambers from the standpoint of their "room performance."

The anechoic chamber is essentially a room lined with absorbing material, effective at microwave frequencies. The purpose of the absorbing material within the room is to present the reflection of the energy incident upon the walls of the room.

Measurements of the far field radiation pattern of an aperture in a ground plane, …


A Study Of The Effect Of A Square Cutout On The Moment Distribution In A Simply Supported Rectangular Plate Under Normal Concentrated Load By The Moiré Fringe Method, Taher F. Raja Jan 1966

A Study Of The Effect Of A Square Cutout On The Moment Distribution In A Simply Supported Rectangular Plate Under Normal Concentrated Load By The Moiré Fringe Method, Taher F. Raja

Masters Theses

"Plexiglass models were used to produce Moiré fringes for two different geometrical shapes. The moments in the case of a simply supported rectangular plate with a normal concentrated load were found using the Moiré fringes which directly give the gradients at all points of the surface of the model. The variation of the moments due to a square cutout was also studied by this method. As a check for the experimental method, the analytical solution was presented for the plate without a cut-out. The Moiré method yields moments to an accuracy of 3 to 15 percent, however, care must be …


The Effect Of Combined Torsional And Bending Loads On A Channel Beam With One End Restrained From Warping, David M. Schaeffer Jan 1966

The Effect Of Combined Torsional And Bending Loads On A Channel Beam With One End Restrained From Warping, David M. Schaeffer

Masters Theses

"Channel beams have been designed with the main purpose of giving large resistance to bending while the torsional strengths are known to be relatively small. In this experiment, a cantilevered channel beam was loaded with a concentrated load at the free end, first through the experimentally determined shear center and then through the centroid of the cross section. For each loading condition, the strains were measured with the aid of SR-4 strain gages placed at intervals along the length of the beam. With the aid of a computer, the strains were converted into longitudinal stresses and these stresses were compared …


Modification Of The Hydraulic Jump By Submerged Jets, Edward Leon Tharp Jan 1966

Modification Of The Hydraulic Jump By Submerged Jets, Edward Leon Tharp

Masters Theses

"Tests were performed in order to determine the effect of submerged jets injecting water into the base of the hydraulic jump. The jump was studied in terms of the following properties: specific energy of the flow leaving the hydraulic jump, length of the hydraulic jump, tailwater depth, and wave formation properties. These properties for the hydraulic jump with submerged jets were compared to the natural hydraulic jump.

Results of the tests indicate that: submerged jets at any angle tested tend to decrease the specific energy of the water leaving the jump and are more effective than the impulse-momentum principle indicates, …


Minimum Cost Data Collection Techniques For Circulation Control At The University Of Missouri At Rolla Library, John Peter Shewchuk Sr. Jan 1966

Minimum Cost Data Collection Techniques For Circulation Control At The University Of Missouri At Rolla Library, John Peter Shewchuk Sr.

Masters Theses

"Data collection is beginning to assume increased importance in the field of data processing. This thesis investigates a method for quantitatively selecting a portion of the library to place on an automated circulation control system that uses data collection as an entry into a data processing system.

The circulation function of the library was considered to be an inventory problem. Titles were considered as items of inventory and circulation of that title was considered to be a "sale" of that item. The IMPACT method was used to distribute items (titles) in a sample by age. Various ages were found to …


Analysis Of Sand Asphalt Mixtures, Maurice A. Sayegh Jan 1966

Analysis Of Sand Asphalt Mixtures, Maurice A. Sayegh

Masters Theses

"The objective or this investigation was to determine the optimum percent of asphalt which should be added to the sand asphalt mixture. Also the effects of filler on the properties or the sand-asphalt mixture were evaluated.

The variables in this study were mineral filler, asphalt cement, and asphalt content. The sand used in this study was sub-rounded, and uniformly graded. The asphalt was asphalt cement with two different penetrations, one of 85-100 penetration grade and the other of 120-150 penetration grade.

Three different groups of mixtures of sand-asphalt were prepared. The first group consisted of adding 85-100 penetration asphalt to …


Analysis Charts For Single And Multi-Span Gabled Frames, John (Chung-Su) Ma Jan 1966

Analysis Charts For Single And Multi-Span Gabled Frames, John (Chung-Su) Ma

Masters Theses

"A method for analyzing single and multi-span gabled frames using analysis charts is presented. This method requires considerably fewer computations than methods previously used (such as the moment distribution and slope-deflection methods). Analysis charts are presented for single gabled frames having fixed or pinned ends at ground level, and charts are also presented which can be used to efficiently analyze multi-gabled frames.

The data for the analysis charts were obtained using matrix techniques in conjunction with the digital computer. These techniques are described"--Abstract, page ii.


Anodic Dissolution Of Silver In Aqueous Solutions, B. W. Jong Jan 1966

Anodic Dissolution Of Silver In Aqueous Solutions, B. W. Jong

Masters Theses

"The purpose of this investigation was to study the anodic dissolution of silver in various electrolytes to determine if there existed any deviations from Faraday’s law in nitric acid-silver nitrate solutions. The effect of small additions (10-4 and 10-5 N) of Cl-, SO4=, and CrO4= on the apparent valence and dissolution potential was also studied. Current densities were varied from 0.00 to 0.07 amp·cm-2.

Based on the observed apparent valences and a grey film containing metallic particles on the anode surface, it was concluded that deviations from Faraday’s law …


Some Effects Of A Non-Uniform Specific Charge Upon Space Vehicle Parameters, Geary L. Leger Jan 1966

Some Effects Of A Non-Uniform Specific Charge Upon Space Vehicle Parameters, Geary L. Leger

Masters Theses

"An equation is derived for the space-charge-limited current of an ion beam when there exist n different species of ions in the beam. The combined effects of non-uniform specific charge and space-charge-limited conditions upon thrust, propellant flow rate, and payload ratio are studied, and a graphical investigation and interpretation is made.

This thesis will show that: (1) The existence of multiply ionized species in an ion beam will increase the space-charge-limited current over that expected in a beam composed of purely singly ionized ions, (2) the thrust produced by the ion beam is independent of the non-uniform specific charge distribution, …


A Crystallographic Study Of The Pbzro₃-Pbtio₃-Bifeo₃ Ternary System., Dannie R. Clarida Jan 1966

A Crystallographic Study Of The Pbzro₃-Pbtio₃-Bifeo₃ Ternary System., Dannie R. Clarida

Masters Theses

"The purpose of this investigation was to conduct a crystallographic study of the PbZrO₃-PbTiO₃-BiFeO₃ ternary system, where all three components are perovskites. Lead zirconate is antiferroelectric, lead titanate is ferroelectric, and bismuth ferrate is thought to be ferroelectric. X-ray diffraction analysis was employed to determine the crystallographic structure and lattice parameters.

A tetragonal region was found to exist in the area of high PbTiO₃ content. A rhombohedral region occurred in the remainder of the system with high BiFeO₃ and PbZrO₃ content, except for an orthorhombic envelope along the PbZrO₃-BiFeO₃ side of the diagram up to approximately 70 per cent BiFeO₃.The …


Some Effects Of Sodium Pentachlorophenol On Activated Sludge And Minnows., James Albert Heidman Jan 1966

Some Effects Of Sodium Pentachlorophenol On Activated Sludge And Minnows., James Albert Heidman

Masters Theses

"The primary purpose of this investigation was to determine the effect of sodium pentachlorophenol on activated sludge. An additional objective was to determine the toxicity of sodium pentachlorophenol to minnows.

All activated sludge units were grown on a glucose and mineral nutrient waste. In addition, a unit acclimated to 100 and 250 mg/1 of sodium pentachlorophenol was also studied. The effect of a shock loading of sodium pentachlorophenol was found to depend on the concentration of the loading and also on the group of micro-organisms which were predominating. One activated sludge system was seriously impared at a shock loading of …