Digital Commons Network^™

Inorganic Biodegradable Devices For Temporary Implants, Kassan Unda

Masters Theses

"Implantable electronic devices have great potential to benefit many health care technologies. They comprise of two different categories. The first is permanent prosthetic devices like cardiac pacemakers or nerve stimulants. The other category includes temporary devices for interventional medical monitoring and control scenarios, which lose functionality and become unnecessary after their intended operational lifetime. This can cause serious electromagnetic and biomechanical safety concerns if not removed from the body by an additional surgical operation.

This thesis focuses on exploring the feasibility of implantable inorganic bioresorbable thin film resistive devices utilizing bioactive glass as the core structural material. This device will …

Economic And Environmental Comparison Of Different Ordering Policies For An Integrated Inventory Control And Supplier Selection Problem, Sepideh Almasi Monfared

Masters Theses

"This study analyzes an integrated inventory control and supplier selection problem in stochastic demand environment under carbon emissions regulations. In particular, a continuous review inventory model with multiple suppliers is investigated under carbon taxing and carbon trading regulations. We analyze and compare the optimal supplier selection and order splitting decisions with single sourcing and two alternative delivery structures for multi-sourcing, namely, sequential ordering and sequential delivery. For each of the three ordering policies, a solution method is proposed and these policies are compared in terms of their economic as well as environmental performances. A numerical study is conducted to demonstrate …

Uterine Cervical Cancer Histology Image Feature Extraction And Classification, Koyel Banerjee

Masters Theses

"The current study presents the investigation and development of image processing, computational intelligence, fuzzy logic, and statistical techniques for different types of data fusion for a varied range of applications. Raw data, decision level and feature level fusion techniques are explored for detection of pre Cervical cancer (CIN) grades from digital histology images of the cervical epithelium tissues.

In previous research, an automated, localized, fusion-based approach was investigated for classifying squamous epithelium into Normal, CIN1, CIN2, and CIN3 grades of cervical intraepithelial neoplasia (CIN) based on image analysis. The approach included medial axis determination, vertical segment partitioning as medial axis …

Performance Evaluation Of Coaxial Horizontal Axis Hydrokinetic Turbines System, Abdulaziz M. Abutunis

Masters Theses

"Hydrokinetic energy technologies are emerging as a viable solution for renewable power generation. Unlike conventional hydropower turbines, hydrokinetic turbines are environmentally friendly; they operate at zero-head, and do not need dams to preserve the water. Unfortunately, they have a low efficiency which makes their design a challenging task. This work was focused on the hydrodynamic performance of horizontal axis hydrokinetic turbines (HAHkTs) under different turbine arrangements and flow conditions.

It was undertaken in an effort to improve the efficiency of small HAHkTs that harness a river's kinetic energy. Four sets of experiments were performed in a water tunnel to investigate …

Thermodynamics And Crystallography Of The Γ→Ε→Α' Transformation In Femnalsic Steels, Scott Thomas Pisarik

Masters Theses

"FeMnAlSiC steels which exhibit two-stage transformation induced plasticity (TRIP) behavior characterized by the γ→ε→α' dual stage martensitic transformation promise to take a leading role in the development of 3rd generation advanced high strength steels. The crystallographic orientation relationship of the γ→α' and γ→ε athermal martensitic transformations in these steels has been determined as the Kurdjumov-Sachs and the Shoji-Nishiyama, respectively. Six crystallographic variants of α-martensite consisting of three twin-related variant pairs were observed in ε- bands. A planar parallelism of {0001}ε || {110}α' and a directional relation of α' lying within 1⁰ of ε existed for these variants. Two regular solution …

Performance Analysis Of Cutting Graphite-Epoxy Composite Using A 90,000 Psi Abrasive Waterjet, Aiswarya Choppali

Masters Theses

"Graphite-epoxy composites are being widely used in many aerospace and structural applications because of their properties: which include lighter weight, higher strength to weight ratio and a greater flexibility in design. However, the inherent anisotropy of these composites makes it difficult to machine them using conventional methods. To overcome the major issues that develop with conventional machining such as fiber pull out, delamination, heat generation and high tooling costs, an effort is herein made to study abrasive waterjet machining of composites. An abrasive waterjet is used to cut 1" thick graphite epoxy composites based on baseline data obtained from the …

Cable Discharge Events (Cde) -- A Modeling And Simulation Perspective, Viswa Pilla

Masters Theses

"Cable discharge events (CDE) typically occur when a charged cable is connected to an electronic device. Several CDE damages in Ethernet LAN and USB communication interface equipment are reported by the IC manufacturers. CDE differs from other types of ESD such as human body model (HBM), charged device model (CDM) and IEC 61000-4-2 mainly due to faster rise times, longer pulse widths and higher peak currents. Various factors such as cable geometries, charging and discharging mechanisms, and load conditions influence CDE. Several researchers have developed some measurement techniques to understand CDE waveforms. However, there is little information regarding its modeling …

Interleaved Coupled-Inductor Boost Converter With Multiplier Cell And Passive Lossless Clamp, Stephen C. Moerer

Masters Theses

"As photovoltaic panels become a more dominant technology used to produce electrical power, more efficient and efficacious solutions are needed to convert this electrical power to a useable form. Solar microconverters, which are used to convert a single panel's power, effectively overcome issues such as shading and panel-specific maximum power point tracking associated with traditional solar converters which use several panels in series. This thesis discusses a high gain DC-DC converter for incorporating single low-voltage solar panels to a distribution level voltage present in a DC microgrid. To do this, a converter was developed using coupled inductors and a capacitor-diode …

Machinability Improvement During High-Speed End-Milling Of Inconel 718 Alloy, Chukwujekwu Nnadi

Masters Theses

“This thesis presents the results of the experimental investigation of the effects of machining parameters (spindle speed and feedrate) and cooling strategies [Minimum Quantity Lubrication (MQL), Cryogenic Liquid Nitrogen (LN₂), and combined (MQL+LN₂)] on cutting force components, cutting temperature, tool wear and surface roughness during high-speed slot end-milling of Inconel 718 alloy. In addition, a comparative evaluation of the three cooling strategies was conducted for cutting force components, surface roughness and residual stresses. All end-milling experiments were conducted on a Cincinnati Milacron Vertical Machining center (VMC), using a 0.5 inch (12.7 mm) diameter, 0.03 inch (0.762 …

Emi Investigation And Modeling Of A Flat Panel Display, Satyajeet Shinde

Masters Theses

"It is often important to carry out EMI analysis in the design phase of an electronic product to predict the radiated emissions. An EMI analysis is important to predict if the product complies with the FCC regulations as well as to gain an understanding of the noise coupling and radiation mechanisms. EMI analysis and prediction of radiated emissions in electronic products that have an electrically large chassis, pose a challenge due to the presence of multiple resonant structures and noise-coupling mechanisms.

The study focusses on the investigation of the main noise coupling mechanisms, the approach and methods used for the …

Folkloric Musicians Among The Bugakhwe, Robert Veith

Masters Theses

Increased access to global media by traditional culture in remote parts of Africa has, in many cases, seen indigenous music marginalized in favor of imported forms. In some places, a folkloric tradition thrives, though this music may face extinction if those who practice it do not document their art in a way which can be passed down to future generations. For this project, I recorded seven musician/composers of the Bugakhwe, a Khoisan people group living in the Okavango Delta region of Botswana. Two were given enough studio time to create a complete CD-length set, so as to show off the …

Test Development To Determine The Feasibility Of Rubber Tractor Treads For Use As Blasting Mats, Matthew Kurtis Coy

Masters Theses

"The objective of this thesis was to determine if rubber tractor treads could be used as an alternative material for blasting mats. These treads are made from steel cable and vulcanized rubber and are very tough. However, once they reach the end of their life on mobile equipment, they are destined for a landfill, or dump site because they are too tough to recycle. A potential alternative use for them is as blasting mats.

An examination of existing mat designs was conducted to better understand the matting methods used by the blasting industry today, to learn from those designs allow …

Fabrication Of Out-Of-Autoclave Bismaleimide Based Composite Laminates With Embedded Fiber Optic Sensors, Sudharshan Anandan

Masters Theses

"Composites are becoming the material of choice in applications where weight savings are critical, like aerospace structures. The common composites used are- Carbon/Epoxy and Carbon/Bismaleimide (BMI). BMI based systems are preferred in applications which involve operating temperatures higher than conventional epoxies. Carbon/BMI laminates are traditionally fabricated in an autoclave, which is associated with high operating costs. In this work, a low cost out of autoclave (OOA) process is evaluated. It is desirable to have BMI OOA prepreg systems cure at reasonably low temperatures with sufficient degree of cure and green strength to maintain rigidity for subsequent freestanding post cure Carbon/BMI …

A Driving Simulator Study To Evaluate The Impact Of Portable Changeable Message Signs (Pcms) On Driver Speed Characteristics, Bharath Kolar Venkat

Masters Theses

"This research project examined the effects of sequential Portable Changeable Message Signs (PCMS) on driver behavior in work zones. PCMS are temporary traffic control (TTC) devices, part of Intelligent Transportation Systems, which supplement static signs to provide advance warning and real-time information to drivers. Text and number based messages are displayed on the PCMS for which detailed evaluation has not been carried out before. This research fills this gap using a driving simulator (DS) supplemented by objective and subjective surveys. A work zone on I-44 in rural Missouri was replicated in the DS using video recordings and GIS (Geographical Information …

Analysis Of Academically At-Risk Second Year Students' Perceptions Of How Campus Support Services Engage Them Via Social Media, Brad Sandefer

Masters Theses

No abstract provided.

The Prevalence, Reasons, And Effects Of Hazing On Female Student Athletes, Danielle Steffa

Masters Theses

The present study was designed to understand the prevalence, reasons, and effects of hazing on female student athletes at a midsized, Midwest institution. Hazing is defined as any activity expected of someone joining a group that humiliates, degrades, or risks emotions and/or physical harm, regardless of that person's willingness to participate (Gersehel, Katz-Sidlow, Small, & Zandieh (2003). By using a modified survey done by Hoover (1999) and Allan and Madden (2008), the frequency, reasons why female athletes believe hazing happens, and any effects felt by these athletes was measured. Results showed there are many types of hazing behaviors that are …

Numerical Analysis Of Thermal Stress And Deformation In Multi-Layer Laser Metal Deposition Process, Heng Liu

Masters Theses

"Direct metal deposition (DMD) has gained increasing attention in the area of rapid manufacturing and repair. It has demonstrated the ability to produce fully dense metal parts with complex internal structures that could not be achieved by traditional manufacturing methods. However, this process involves extremely high thermal gradients and heating and cooling rates, resulting in residual stresses and distortion, which may greatly affect the product integrity. The purpose of this thesis is to study the features of thermal stress and deformation involved in the DMD process. Utilizing commercial finite element analysis (FEA) software ABAQUS, a 3-D, sequentially coupled, thermo-mechanical model …

Data Classification And Forecasting Using The Mahalanobis-Taguchi Method, Adebolaji A. Jobi-Taiwo

Masters Theses

"Classification and forecasting are useful concepts in the field of condition monitoring. Condition monitoring refers to the analysis and monitoring of system characteristics to understand and identify deviations from normal operating conditions. This can be performed for prediction, diagnosis, or prognosis or a combination of any these purposes. Fault identification and diagnosis are usually achieved through data classification, while forecasting methods are usually used to accomplish the prediction objective. Data gathered from monitoring systems often consists of multiple multivariate time series and is fed into a model for data analysis using various techniques. One of the data analysis techniques used …

Updated Screening Criteria For Steam Flooding Based On Oil Field Projects Data, Mariwan Qadir Hama

Masters Theses

"Enhanced oil recovery (EOR) screening is considered the first step in evaluating potential EOR techniques for candidate reservoirs. Therefore, as new technologies are developed, it is important to update the screening criteria. Many of the screening criteria for steam flooding that have been described in the literature were based on data collected from EOR surveys biennially published in the Oil & Gas Journal. However, these datasets contain some problems, including outliers, missing data, inconsistent data and duplicate data, that could affect the accuracy of the results. Despite the importance of ensuring the quality of a dataset before running analyses, data …

Improving Plasma Actuator Performance At Low Pressure, And An Analysis Of The Pointing Capabilities Of Cubesats Using Plasmonic Force Propulsion (Pfp) Thrusters, Paul Daniel Friz

Masters Theses

"This thesis details the work done on two unrelated projects, plasma actuators, an aerodynamic flow control device, and Plasmonic Force Propulsion (PFP) thrusters, a space propulsion system for small satellites.

The first half of the thesis is a paper published in the International Journal of Flow Control on plasma actuators. In this paper the thrust and power consumption of plasma actuators with varying geometries was studied at varying pressure. It was found that actuators with longer buried electrodes produce the most thrust over all and that they substantially improved thrust at low pressure. In particular actuators with 75 mm buried …

Effect Of Stress Concentrations On Fatigue Of Composite And Metallic Structures, Ross Henry Falen

Masters Theses

"The complex shapes of hydrokinetic turbine blades can include part features such as a fillet, step, or hole. Situations can arise where two part features, such as a hole and a fillet, may be in close proximity which can introduce stress concentrations within the blade structure, adversely affecting the structure's life. Because the interaction between the part features isn't well known, fatigue data is needed to determine the proper analysis.

In this thesis, two separate topics are discussed and investigated. The first topic deals with stress concentrations in hydrokinetic turbine blades. Several blade designs were tested and improved upon to …

Application Of Electrically Invisible Antennas To The Modulated Scatterer Technique, Dylan Andrew Crocker

Masters Theses

"The Modulated Scatterer Technique (MST) has shown promise for applications in microwave imaging, electric field mapping, and materials characterization. Traditionally, MST scatterers consist of dipole antennas centrally loaded with a lumped element capable of modulation (commonly a PIN diode). By modulating the load element, the signal scattered from the MST scatterer is also modulated. However, due to the small size of such scatterers, it can be difficult to reliably detect the modulated signal. Increasing the modulation depth (a parameter related to how well the scatterer modulates the scattered signal) may improve the detectability of the scattered signal. In an effort …

Comparison Of Costs Of Personal Protective Equipment For All Workers To Avoid Costs Of Fall Accidents, Sultan Noori Al-Karawi

Masters Theses

"The construction industry is one of the most important industries in the United States. It is the biggest contributor in the growth of the U.S. economy. Despite the great achievements and prominent role for this sector in the U.S. economy, the construction industry is suffering from neglect and dereliction by related government institutions and private companies. This neglect led to formation of a negative image about the construction industry that has caused a deep impact in productivity and economic growth. One of the reasons is a high percentage of accidents that occur within the construction industry which leads to injuries …

Theoretical Analysis Of Shape Separation Of Particles Using Flow Field-Flow Fractionation, Mehrdad Alfi

Masters Theses

"Size separation of spherical and rod-like particles in Flow Field-flow Fractionation was investigated theoretically. The effect of cross flow migration and rod orientation was also investigated as a new mode of study. It has been shown that the rod local orientation makes different diffusivity values in comparison with spherical particles and helps particle separation. Additionally, a new mechanism of lift-hypelayer mode was used for rod-like particles which can be compared with steric mode of spherical particles. This mechanism is said to be due to hydrodynamic interaction of rod-like particle with wall and with other rods.

As a measure of axial …

Quantitative Modeling Of Reliability And Survivability For Cyber-Physical Power Systems, Murtadha Nabeel Albasrawi

Masters Theses

"Critical infrastructure systems are increasingly reliant on cyber infrastructure that enables intelligent real-time control of physical components. This cyber infrastructure utilizes environmental and operational data to provide decision support intended to increase the efficacy and reliability of the system and facilitate mitigation of failure. Realistic imperfections, such as corrupt sensor data, software errors, or failed communication links can cause failure in a functional physical infrastructure, defying the purpose of intelligent control. As such, justifiable reliance on cyber-physical critical infrastructure is contingent on rigorous investigation of the effect of intelligent control, including modeling and simulation of failure propagation within the cyber-physical …

An Investigation Of Contaminant Metal Distribution And Mineral Speciation In The Soil Near The Buick Recycling Division Smelter, Iron County, Missouri, Krista Nicole Rybacki

Masters Theses

"Trace metal contamination studies were conducted near the Buick Resource Recycling Division. This study used sequential extraction, total digestion, X-Ray Diffraction (XRD), and Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS) to study trace metals in two soil cores. Sequential extraction analysis of the soil cores revealed that lead was associated with either iron or manganese oxides. Zinc and copper were bound to soil components, extracted mainly from organics, sulfides, and clays. Total digestion results compared favorably to the sum of the sequential extraction results for lead, thus validating the sequential extraction methodology. The highest concentration observed for lead was 4,743 parts …

An Effectiveness - Based Analysis Of Ground Coupled Heat Exchangers, Chou Shen

Masters Theses

"This thesis develops a theoretical framework, termed [Effectiveness] - BLU, to characterize the relation between temperatures, thermal contact and borehole length as it relates to the heat transfer processes in ground coupled heat exchangers used for ground source heat pump systems.

Borehole outflow temperature depends on the inflow temperature, the heat imposed on the borehole and the temperature history of the ground. In addition, variation of outflow temperature influences inflow temperature, even for the case of constant heat pump load. Because of this kind of feedback, the borehole inflow temperature may not be constant even with a fixed building load. …

Characterization Of A Plant Gene Family Expanded In Glycine Max, Lisa Snoderly-Foster

Masters Theses

"Glycine max, commonly named the cultivated soybean, is one of the oldest and most important food crops in the world. The study of the G. max genome provides valuable insight into the molecular mechanisms that govern its reproduction and environmental responsiveness, key factors in maximizing crop yield. Since the complete sequencing of the genome in 2010, the analysis has become faster and easier, especially with the development of numerous web-based, publically accessible bioinformatics tools.

This research effort utilizes these tools to characterize a small, unannotated G. max gene family. Although no definitive evidence was uncovered for the production of a …

A Receiver Function Study Of Crust Thickness And Composition Beneath The Southwestern United States, Si Wu

Masters Theses

"Over the past decades, the seismic structure of the crust and upper mantle of the southwestern United States was examined using an array of different methods. The structure and composition of crust received special attentions, most due to the hydrocarbon reserves in this area. Here new constraints on crustal evolution and structure models are provide by systematically analyzing 37,402 receiver functions recorded at 234 seismic stations on the southwestern United States. The results reveal that the Transitional Crust is characterized by a thin (29.0±1.0 km) crust, a low Vp/Vs ratio of 1.76±0.016 and a high amplitude (R) of P-to-S converted …

Adaptive Wavelet Discretization Of Tensor Products In H-Tucker Format, Mazen Ali

Masters Theses

"In previous work, the solution to a system of coupled parabolic PDEs, modeling the price of a CDO, was approximated numerically. Due to the nature of the problem, the system involved a large number of equations such that the parameters cannot be stored explicitly. The authors combined the data sparse H-Tucker storage format with the Galerkin method to approximate the solution, using wavelets for the space discretization together with time stepping (Method of Lines). The aforementioned approximation is of the linear kind, i.e., using a nonadaptive method. In this work, three methods for solving such systems adaptively are presented, together …