Digital Commons Network^™

Evaluating Student Responses To Young Adult Literature Based On Group Dynamic Within The Literature Circle Setting, Abigail J. Schmitz

Masters Theses

The push of the Social and Emotional Learning (SEL) standards encourages teachers to assist students with overcoming personal obstacles in the classroom. In the middle grades, young adult literature can be an outlet for students by allowing them to connect with characters similar to themselves and their life experiences. Within the middle level classroom, literature circles can address SEL needs and state standards while allowing students to work closely with their peers sharing in a discussion format in response to the same young adult novel. This research analyzed two groups of students and their oral and written responses to the …

Classification Of Basal Cell Carcinoma Using Telangiectatic Vessels And Machine Learning, Hemanth Yadav Aradhyula

Masters Theses

“Basal cell carcinoma (BCC) is one of the most common types of skin cancer in the United States. Early detection of BCC by noninvasive techniques can decrease delay in treatment and save cost. A recent study estimated that 5.4 million cases of non-melanocytic skin cancer (NMSC) occur each year in the US. BCC accounts for 50% of NMSC cases. Telangiectasia, which appears in most BCCs is an important feature for identification of BCC for an automatic diagnostic system. In this thesis, three methods for detection of telangiectasia present in dermoscopy lesion image (DI) were proposed. Detected telangiectasia in DI was …

In-Situ Control Of Substrate Temperature In Additive Manufacturing To Homogenize Micro-Hardness Of Laser Clad Deposits Using Thermo-Electric Cooling, Raghu Ram Kolla

Masters Theses

”Nickel hard-surfacing alloys are replacing hard Chromium coatings due to their excellent wear and corrosion-resistant properties. In laser cladding of these alloys, however, these properties can vary across the height of the deposit due to an accumulation of excess heat generated in the deposit during the process. This may result in uneven wear of the clad parts which can be detrimental for practical purposes. The research objective is to develop an in-situ cooling system that works in line with the laser deposition system to extract the excess heat buildup and reduce the variation in the hardness of the Ni-based clad …

Error Mapping Of Build Volume In Selective Laser Melting, Ninad Kulkarni

Masters Theses

“Selective laser melting is one of the commonly used additive manufacturing processes employed for production of functional part. Therefore, quality aspects such as dimensional accuracy have become a point of great interest. Like all of the other additive manufacturing processes selective laser melting process suffers from the issue if having wide range of process parameters making the process control a complex task. Additionally, issues specific to the selective laser melting process such as position dependency of accuracy of the part, makes it difficult to predict the resulting dimensional inconsistencies in the part manufactured by this processes. This research is an …

A Study Of The Potential Applications Of Am241, And Determining The Feasibility Of Using Gamma Spectroscopy For Future Physical Validation, Eric A. Feissle

Masters Theses

“Am241 is typically produced via Pu241 decay in a uranium fueled reactor. Presence of Am241 can be used as the age estimation tool for spent fuel, which is a focus of this thesis along with the interest of the measurement and the ratio of production rates of Am241’s activation products; Americium-242 and its first excited state of Americium-242m. MCNP models of the core and BEGe 3825 detector were built. These models were compared with established and physical measurements of gamma/x-ray standards that were available at the reactor. Thermal fluxes at 200 kW for potential foils centered in the source holder …

An Investigation Of Borax For Sealing Inflow From Berea Sandstone, Tri-Tris Bao Nguyen

Masters Theses

"Well inflow control is a major challenge for the oil and gas industry. Erle Haliburton revolutionized well inflow control with his patent for cementing oil wells in 1921. Soon after, cement became the accepted material to establish well integrity and has been ever since. Cement is used in all phases of the well life cycle, and it is expected to hold indefinitely once set. Yet based on the nature of cement and the placement techniques, flow pathways may develop from improper cementing jobs or from cement degradation over time. Well integrity is especially crucial for wellbore plugging and abandonment, since …

Dynamic Electromechanical Characterization Of Ferroelectrics At Cryogenic Temperatures, William Kent Hays

Masters Theses

"Electromechanical coupling in ferroelectric materials has given rise to a myriad of technological applications. Through the complex domain structure of ferroelectrics materials, which are typically stiff and have low damping, can exhibit significant structural damping. The applications for a material with a relatively large Young’s modulus and the ability to damp out vibrations would be useful for structures, more specifically, aerospace structures. The dynamic mechanical properties of ferroelectrics, particularly mechanical properties while an electric field is applied, are not well understood. This is due in part to the lack of experimental methods to measure such properties. Even with recent advancements …

Wrinkling Of Functionally Graded Sandwich Structures Subject To Biaxial And In-Plane Shear Loads, Harold Costa

Masters Theses

"Benefits of a functionally graded core increasing wrinkling stability of sandwich panels have been demonstrated in a recent paper [1] where a several-fold increase in the wrinkling stress was observed, without a significant weight penalty, using a stiffer core adjacent to the facings. In the present paper wrinkling is analyzed in case where the facings are subject to biaxial compression and/or in-plane shear loading and the core is arbitrary graded through-the-thickness. Two issues addressed are the effect of biaxial or in-plane shear loads on wrinkling stability of panels with both graded and ungraded core and the verification that functional grading …

Ti-Fe Intermetallics Analysis And Control In Joining Titanium Alloy And Stainless Steel By Laser Metal Deposition, Wei Li

Masters Theses

"Direct fusion joining titanium alloy and stainless steel can cause brittle Ti-Fe intermetallics which compromise the mechanical properties of diffusion bonds between titanium alloys and stainless steel. Therefore, filler metals are required as transition layers. In this research, stainless steel metallic powder was directly deposited on the titanium alloy substrate by laser beam, the Ti-Fe intermetallic phases formed in this process were investigated through analyzing fracture morphology, phase identification, and Vickers Hardness Number (VHN). After that, Laser Metal Deposition (LMD) was applied to explore a new fabricating process to join Ti6Al4V and SS316. A transition composition route was introducedTi6Al4V → …

3d Bioprinting A Pcl/13-93b3 Glass Composite And Its Potential Use As A Bio-Ink, Caroline Blair Murphy

Masters Theses

"A major limitation of using synthetic scaffolds in tissue engineering is little growth of incorporated cells in the interior of the scaffold, resulting in insufficient angiogenesis in the scaffold interior. Recently, cells have been 3D bioprinted concurrently with biomaterials to produce a cellularized, bioactive, angiogenic 3D environment. This thesis describes a novel solvent-extrusion method for printing polycaprolactone (PCL)/bioactive borate glass composite as a biomaterial for a cell-laden scaffold.

Bioactive borate glass was added to a mixture of PCL and organic solvent to make an extrudable paste, creating scaffolds measuring 10×10×1 mm³ in overall dimensions with pore sizes ranging from …

Recovery Of Phosphate Minerals From Plant Tailings Using Direct Froth Flotation Process, Ashraf Alsafasfeh

Masters Theses

"The wastes produced from phosphate industry presents many challenges due to the economic and environmental impacts of their disposal. In the meantime, scarcity of high-grade phosphate ores persuades researchers to find novel methods of upgrading these wastes (secondary sources) and recycling them in the production plant circuit. The goal of this study is to investigate the potential to upgrade the phosphorus content in the tailing produced from a phosphorous production plant using direct froth flotation process. Characterization studies such as X-ray diffraction (XRD), scanning electron microscopy (SEM), and mineral liberation analysis (MLA) were first conducted to identify the mineralogical and …

Biodegradable Capacitive Pressure Sensor Toward Temporary Implants For Intervertebral Pressure Monitoring, Devdatt Chattopadhyay

Masters Theses

"The objective of this thesis is to demonstrate a new class of implantable biomedical device, based on biodegradable borate glass as the substrate material that can be potentially used to monitor the intervertebral pressure in the lumbar region of the human body. Two major types of implantable biomedical devices include the permanent prosthetic devices such as pacemakers and the temporary implants for short-term intervention and monitoring. Unless surgically removed after their intended operation, the temporary implants are left inside the body causing electromagnetic issues, latent complications and various biomechanical safety concerns. In order to address this issue, a new device …

Design And Modeling Of An Aluminum Smelting Process To Analyze Aluminum Smelter And Identify The Alternative Uses Of Nuclear Power Small Modular Reactor, Rajesh Ramkrushna Patharabe

Masters Theses

"This thesis focuses on design and analysis of an Aluminum Smelting process using computer simulation which performs a dynamic state computation. The objective is to develop a Dynamic Simulation Model of an Aluminum Smelter using Mimic Simulator to analyze the dynamic behavior of an Aluminum Smelter to evaluate strategies for alternative design or uses of Nuclear Power Small Modular Reactor to improve the efficiency of the process and to reduce the heat losses.

Increasing energy needs, decrease of the availability of cheap electricity and the need to reduce the greenhouse gases emissions are the biggest hurdles for running Aluminum smelters …

In Situ Ph Determination Based On The Nmr Analysis Of ¹H-Nmr Signal Intensities And ¹⁹F-Nmr Chemical Shifts, Ming Huang

Masters Theses

"The pH of an NMR sample can be measured directly by NMR experiments of signal intensities, chemical shifts, or relaxation time constants that depend on the pH. The ¹H NMR peak intensities of the pH indicator phenolphthalein change as it changes from the OH-depleted form to the OH-rich form in the range of pH = 11.1 to 12.7. Because this range is rather small, another NMR technique was utilized based on ¹⁹F chemical shifts. The shift of F^- in an aqueous solution of NaF changes in the alkaline range between pH = 11.0 and 14.0 and even …

Comparison Of ²⁵²Cf Time Correlated Induced Fission With Amli Induced Fission On Fresh Mtr Research Reactor Fuel, Jay Prakash Joshi

Masters Theses

"The effective application of international safeguards to research reactors requires verification of spent fuel as well as fresh fuel. To accomplish this goal various nondestructive and destructive assay techniques have been developed in the US and around the world. The Advanced Experimental Fuel Counter (AEFC) is a nondestructive assay (NDA) system developed at Los Alamos National Laboratory (LANL) combining both neutron and gamma measurement capabilities. Since spent fuel assemblies are stored in water, the system was designed to be watertight to facilitate underwater measurements by inspectors. The AEFC is comprised of six ³He detectors as well as a shielded …

A Comprehensive Analysis Of Lost Circulation Materials And Treatments With Applications In Basra's Oil Fields, Iraq: Guidelines And Recommendations, Husam Hasan Alkinani

Masters Theses

"Lost circulation materials (LCM's) have been widely used to avoid or stop losses. Due to a large number of current available LCM's and their different applications, classification of LCM's is very important. The most recent LCM classification was published around 50 years ago, and this paper intends to fill this gap with an updated classification including conventional and new technologies. Lost circulation materials and treatments are re-classified into various categories based on their appearance, applications, chemical and physical properties.

Wells in Basra's oil fields are highly susceptible to lost circulation problems when drilling through the Dammam, Hartha, and Shuaiba formations. …

Predicting The Impact Of Data Corruption On The Operation Of Cyber-Physical Systems, Erik David Burgdorf

Masters Theses

"Cyber-physical systems, where computing and communication are used to fortify and streamline the operation of a physical infrastructure, now comprise the foundation of much of modern critical infrastructure. These systems are typically large in scale and highly interconnected, and span application domains from power and water distribution to autonomous vehicle control and collaborative robotics. Intelligent decision support in these systems is heavily reliant on the availability of sufficient and sufficiently correct data. Failure or malfunction of these systems can have devastating consequences in terms of public safety, financial losses, or both.

The research described in this thesis aims to predict …

Family-Based Association Studies Of Autism In Boys Via Facial-Feature Clusters, Luke Andrew Settles

Masters Theses

"Autism spectrum disorder (ASD) refers to a set of developmental disorders with varied attributes. Due to its substantial heterogeneity in terms of behavioral and clinical phenotypes, it is challenging to discern the genetic biomarkers behind ASD, even though the disease is known to be genetic in nature. This serves as a motivation to detect relationships between single nucleotide polymorphisms (SNPs) and a causal autism disease susceptibility locus (DSL) within more homogeneous subgroups. Recently, clinically meaningful subclassifications of ASD have been discovered utilizing facial features of prepubescent boys. Therefore, through the employment of data from 44 prepubertal Caucasian boys with ASD …

Liquid Pulsed Plasma Thruster Plasma Plume Investigation And Mr-Sat Cold Gas Propulsion System Performance Analysis, Jeremiah Daniel Hanna

Masters Theses

"The plasma plume produced by a liquid pulsed plasma thruster is investigated using a Langmuir triple probe and a nude Faraday probe. The Langmuir triple probe failed to produce results which are suspected caused by the presence of ionic liquid in the plume resulting in shorting of the probe. The nude Faraday probe is able to record the ion current density which revealed a high level of inconsistency in the plasma plume. Ion current density recorded by the nude Faraday probe had a relative standard deviation of upwards of 100% of the mean value. Controlling the amount of propellant used …

Entropy-Based Performance Analysis Of Jet Engines; Methodology And Application To A Generic Single-Spool Turbojet, Mohammad Abbas

Masters Theses

"Recently developed methodology that provides the direct assessment of traditional thrust-based performance of aerospace vehicles in terms of entropy generation (i.e., exergy destruction) is modified for stand-alone jet engines. This methodology is applied to a specific single-spool turbojet engine configuration. A generic compressor performance map along with modeled engine component performance characterizations are utilized in order to provide comprehensive traditional engine performance results (engine thrust, mass capture, and RPM), for on and off-design engine operation. Details of exergy losses in engine components, across the entire engine, and in the engine wake are provided and the engine performance losses associated with …

Assessment Of Rockfall Rollout Risk Along Varying Slope Geometries Using The Rocfall And Crsp Software, Mariam S. Al E'Bayat

Masters Theses

"Most routes in mountainous areas suffer from rock falling, rolling and bouncing risk. There are many computer programs concerned with simulating the rockfall problem, and whereas they have the same purpose, they however differ in the input data that's needed to simulate the problem, and they also differ in the way of processing and kind of output.

This study used Rocfall® and the Colorado Rockfall Simulation Program (CRSP®) to simulate sixty-three models of varying slope geometry, where only the slope geometry is changed with the same material properties for both the slope and the rocks.

Both programs were fast and …

Evaluation Of Preformed Particle Gels Penetration And Propagation Behavior For A Conformance Control Treatment In Partially Open Conduits, Ahmed Mohamed Aldalfag

Masters Theses

"Preformed particle gels (PPGs) serve as a conformance control agent and have been used widely to control excess water production through conduits, fractures or fracture-like features. This research ranks the parameters that impact PPG resistance to water flow in partially opened conduits. Experiments were conducted to examine the effect of brine concentration, PPG injection pressure, back pressure, reducing water salinity and matrix permeability on PPG resistance to water flow through conduits, PPG penetration to the matrix. PPGs were swelled in different concentration brines and were injected into the conduits at a few designed injection pressures. PPG swollen in high brine …

Determination Of Significant Parameters That Drive Fracture Optimization In The Glauconite Formation, Southern Chile, Ghassan Saleh Mahdi Alqatrani

Masters Theses

"The Glauconite Formation in the Magallanes Basin of Southern Chile is a clay- and silica-rich formation with low permeability. As with many of the unconventional resources, the Glauconite Formation requires a hydraulic fracturing operation to enhance the productivity of the wells in this area.

Data and pertinent information of fracturing, completion, and reservoir quality parameters along with post-fracture production data were collected to initiate a database of nearly 70 wells, to be used to develop a better understanding of the fracturing behavior, optimize the well stimulation, and overcome the major barriers in the hydraulic fracturing of the Glauconite Formation. The …

The Viability Of Advantg Deterministic Method For Synthetic Radiography Generation, Andrew Albert Bingham

Masters Theses

"Time sensitive and high resolution image simulations are needed for synthetic radiography generation. The standard stochastic approach requires lengthy run times with poor statistics at higher resolutions. The investigation of the viability of a deterministic approach to synthetic radiography image generation was explored. The aim was to analyze a computational time decrease over the stochastic method. ADVANTG was compared to MCNP in multiple scenarios including a Benchtop CT prototype, to simulate high resolution radiography images. By using ADVANTG deterministic code to simulate radiography images the computational time was found to decrease over 10 times compared to the MCNP stochastic approach"--Abstract, …

Deformation Processes At The Leading Edge Of The Sevier Fold And Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Masters Theses

"Deformation processes leading to formation and abandonment of 'triangle zones' along the leading edge of the Sevier fold and thrust belt are investigated near Kanarraville, Utah through construction of a detailed geologic map and cross-section along Spring Creek. Here the eastern limb of the Kanarra fold, a Sevier structure, is well exposed along the Hurricane Cliffs due to uplift and erosion of the footwall of the Hurricane Fault. The east-verging Kanarra fold changes from upright to overturned within Spring Creek. Within the fold limb, parasitic folds, minor thrust faults, and duplex structures result in local tectonic overthickening of units and …

Structural And U-Pb Detrital Zircon Geochronologic Constraints On The Origin Of The Condrey Mountain Schist, California - Oregon, Joseph Reid Coons

Masters Theses

"The Condrey Mountain Schist (CMS) of the Klamath Mountains (northern California and southern Oregon) represent low grade oceanic and terrigenous sediments thrust beneath higher grade ophiolitic rocks of the Rattlesnake Creek Terrane (RCT). This study presents new U-Pb detrital zircon dates from the CMS, and from the possibly correlative basin rocks of the Galice Formation and accretionary rocks of the South Fork Mountain Schist. The Galice Formation yields a maximum depositional age of ca. 152 Ma with prominent date distributions of ca. 150-200 Ma (39% of analyzed grains), 200-600 Ma (1%), 600 - 1000 Ma (2%), and 1000-3200 Ma (58%). …

Cyber-Physical Security Of A Chemical Plant, Prakash Rao Dunaka

Masters Theses

"The increasing number of cyber attacks on industries demands immediate attention for providing more secure mechanisms to safeguard industries and minimize risks. A supervisory control and data acquisition (SCADA) system employing the distributed networks of sensors and actuators that interact with the physical environment is vulnerable to attacks that target the interface between the cyber and physical subsystems. These cyber attacks are typically malicious actions that cause undesired results in the cyber physical world, for example, the Stuxnet attack that targeted Iran's nuclear centrifuges. An attack that hijacks the sensors in an attempt to provide false readings to the controller …

Advanced Buffer Materials For Indoor Air Co₂ Control In Commercial Buildings, Pavithra Ethi Rajan

Masters Theses

"The following describes a novel passive approach to control the indoor CO₂ levels in enclosed spaces, primarily focusing on commercial buildings. Amine impregnated silica sorbents were identified as suitable candidates and synthesized; the amine loading ratio was varied to create a range of materials. These samples along with other commercial zeolite candidates have been tested over a range of CO₂ concentrations to determine the CO₂ adsorption capacity in laboratory systems and under simulated room conditions. The research work also focuses on the CO₂ desorption capacity of the candidate adsorbents. The desorption is allowed to occur gradually …

Design And Analysis Of A Passive Heat Removal System For A Small Modular Reactor Using Star Ccm+, Raymond Michael Fanning

Masters Theses

"Next generation nuclear power plants, specifically small modular reactor designs, are the best alternative to fossil fuels for power generation due to their power density and low carbon emissions and constant awareness of safety concerns. A promising safety feature of new designs is the removal of heat by passive systems in accident scenarios. The passive systems require no moving parts and no intervention by personnel. These systems must be accurately simulated for better understanding of the heat transport phenomena: natural convection cooling. Due to the fact that most work developing these passive heat removal systems are proprietary information, a passive …

Micro-Grid Implementation Of A Rooftop Photovoltaic System, Pranav Nitin Godse

Masters Theses

"In recent years, solar power has been a popular form of renewable energy. This research conducts a cost analysis in implementing a rooftop photovoltaic system as part of an energy management schema for a university campus. The proposed system would be installed on the roof of one of the largest buildings on campus at Missouri University of Science and Technology, Toomey Hall; the objective function of the research involves reducing dependence on conventional energy sources on campus. Toomey Hall houses the Department of Mechanical and Aerospace Engineering (MAE) and is the largest academic unit on campus. Considering the vast expanse …