Digital Commons Network^™

Bridge Deck Assessment Using Visual Inspection, Ground Penetrating Radar, Portable Seismic Property Analyzer-Ultrasonic Surface Wave, Hammer Sounding And Chain Drag, Abdullah Hadi Zaid Alhaj

Masters Theses

"Integrated non-destructive techniques were utilized to assess the condition of a reinforced concrete bridge deck. There were two main objectives accomplished.

The first objective was to assess the integrity of the reinforced concrete bridge deck using four non-destructive techniques, namely visual inspection, ground penetrating radar, portable seismic property analyzer-ultrasonic surface wave, and hammer sounding and chain drag. Visual inspection data were used to identify signs of deterioration on surface of the bridge deck such as cracking, concrete leaching, and reinforcement corrosion. Ground penetrating radar data were used to determine the relative condition of the bridge deck. However, due to the …

New Nanoparticle Water-Based Drilling Fluid Formulation With Enhanced Thermal Stability And Inhibition Capabilities In The Woodford Shale, Jose Aramendiz Pacheco

Masters Theses

"Drilling fluid design for unconventional reservoirs aims at preventing formation instability problems associated with fluid invasion, shale swelling, and cuttings dispersion. Although oil-based mud (OBM) can be used to achieve these goals, environmental and economic concerns limit its application. This experimental study evaluated the potential use of nanoparticles (NP) to improve water-based mud (WBM) inhibition capabilities and its ability to enhance the overall drilling fluid thermal stability while providing a cleaner technology to the industry.

Characterization of Woodford shale was completed with X-ray diffraction, cation exchange capacity, and scanning electron microscopy, silica, and graphene NP were characterized with aqueous stability …

Developing A Methodology For Estimating The Growth Of Radiated Emission From Multi-Modular Systems, Kaustav Ghosh

Masters Theses

"The large multiscale problems are commonly faced in real-world applications such as analysis of electromagnetic interference for a printed circuit board installed on a large platform with connected cables, wires and other high speed interfaces. EMI problems are not uncommon in high speed systems which involve multiple modules of complex hardware. As the system clock frequency and data rate increases, so does the challenges in controlling the EMI in such systems. The costs to prototype and to develop networking equipment are growing as a result of increasing complexities and densities. EMC regulations require radiated emission testing to be done in …

Developing Computational Models For Pulsed-Inductive Plasma Formation, Zachary Aaron Gill

Masters Theses

"Pulsed-inductive discharges are a common method of producing a plasma. They provide a mechanism for quickly and efficiently generating a large volume of plasma for rapid use and are seen in applications including propulsion, fusion power, and high-power lasers. However, some common designs see a delayed response time due to the plasma forming when the magnitude of the magnetic field in the device is at a minimum. New designs are difficult to evaluate due to the amount of time needed to construct a new geometry and the high monetary cost of changing the power generation circuit. To more quickly evaluate …

Application Of Seismic Attributes For 3-D Seismic Visualization Contributed In Structural And Stratigraphic Interpretation Of The Tangahoe And Farewell Formations In The Kupe Field, Taranaki Basin, New Zealand, Housam Hussein Grabeel

Masters Theses

"Taranaki Basin is a mainly offshore basin covering an area of approximately 100,000 km², elongated across the western margin of New Zealand's north island. However, the modern limit of the basin is extended toward the deep water to cover about 330,000 km². The basin is divided by tectonic activities into northern and southern grabens. The southern region has become the most extensively researched district in recent years as its prime lithology and structural trap distributions provide numerous hydrocarbon fields. One such field is the Kupe Field (256 km²), which lies on a northerly-plunging, reverse-faulted, …

Field Implementation Of Cement-Based Composite Strengthening Technologies, Michael Andrew Janke

Masters Theses

"With infrastructure continuing to age, technologies are being developed to strengthen structures as a more sustainable option than replacement. The use of fiber-reinforced cementitious matrix (FRCM) strengthening systems is a promising new technology for adding flexural and shear capacity to existing reinforced concrete members. While cement based systems with carbon, PBO, and steel have all been implemented in a lab setting, there is not research data available for installation in the field. FRCM composites have advantages over more widely used fiber reinforced polymer (FRP) composites such as heat resistance and compatibility with concrete substrate. FRP systems have previously been field …

Compressive Behavior Of Masonry Columns Confined With Steel Reinforced Grout (Srg) Composite, Sarah Elizabeth Jemison

Masters Theses

"In this study, a new type of composite comprised of steel fiber cords embedded in a natural hydraulic lime mortar matrix, known as steel reinforced grout (SRG), is explored for the use in confinement of masonry columns. An experimental study was carried out to understand the behavior of solid clay brick masonry columns confined by SRG jackets. Twenty-four confined and seven unconfined columns with a square cross-section were tested to failure under a monotonic concentric compressive load. Test parameters considered were the column corner condition, number of fiber jacket layers, and number of fiber overlapping faces. SRG confinement improved the …

Smart Augmented Reality Instructional System For Mechanical Assembly, Ze-Hao Lai

Masters Theses

"Quality and efficiency are pivotal indicators of a manufacturing company. Many companies are suffering from shortage of experienced workers across the production line to perform complex assembly tasks such as assembly of an aircraft engine. This could lead to a significant financial loss. In order to further reduce time and error in an assembly, a smart system consisting of multi-modal Augmented Reality (AR) instructions with the support of a deep learning network for tool detection is introduced. The multi-modal smart AR is designed to provide on-site information including various visual renderings with a fine-tuned Region-based Convolutional Neural Network, which is …

An Investigation Into The Effects Of Ion Tracks On Α-Quartz, Bryant Alan Kanies

Masters Theses

"The passage of a swift heavy ion through a material can cause columnar, amorphous nano-structures known as ion tracks. Swift heavy ions are present in a number of applications ranging from nuclear reactors to nuclear waste storage and onboard spacecraft. The study of ion tracks has been ongoing since the late 1950s and has led to several technological advancements. In fact, ion beams have been used to enhance material properties and aid in the production of electrical components. Ion beams, and their resultant ion tracks, can therefore be seen as a method to purposefully alter material properties such as thermal …

Is A Measure Of Observed Engagement As Valid As Self-Reported Engagement Measure?, Debarati Majumdar

Masters Theses

"The present study attempted to investigate a never explored research question, i.e., whether an observed engagement measure would be as valid as self-reported engagement measure. Data were collected from the employees of an academic institute. Minimum of 110 self-ratings from subordinate employees (i.e. the self-raters) and 110 observer-ratings from those subordinates' respective supervisor employees (i.e. the other raters) were supposed to be collected to robustly test the formulated hypotheses of the present study. However, due to some sudden structural changes within the organization (i.e. the academic institute from where data were collected), only 32 observer-ratings and 32 self-ratings (i.e. 32 …

Classification Of Eeg Signals Of User States In Gaming Using Machine Learning, Chandana Mallapragada

Masters Theses

"In this research, brain activity of user states was analyzed using machine learning algorithms. When a user interacts with a computer-based system including playing computer games like Tetris, he or she may experience user states such as boredom, flow, and anxiety. The purpose of this research is to apply machine learning models to Electroencephalogram (EEG) signals of three user states -- boredom, flow and anxiety -- to identify and classify the EEG correlates for these user states. We focus on three research questions: (i) How well do machine learning models like support vector machine, random forests, multinomial logistic regression, and …

Analysis And Mitigation Of Parallel-Plate Noise For High-Isolation Applications, Zachary Joel Legenzoff

Masters Theses

"Achieving highs levels of isolation between different functionalities in a PCB can be challenging. One of the major issues is that vertically adjacent planes or area fills in a PCB can form a parallel-plate waveguide with no cutoff frequency and serve as an efficient coupling mechanism between interconnects. Due to the finite size of the conductors, reflections off the edges of these parallel-plate cavities can result in the formation of standing-wave patterns with very high field strengths, resulting in high coupling at certain frequencies. This noise coupling mechanism can be suppressed by connecting the parallel plates together with an adequate …

Microstructural Development And Its Effect On Aqueous Corrosion Of A Borosilicate Glass Ceramic For Waste Vitrification, Nicholas Stephen Roberts

Masters Theses

"Waste loadings of reprocessed spent nuclear fuel vitrified into borosilicate glass can be increased by precipitating environmentally stable phases concentrated with waste components in a chemically stable glass matrix. The principal objective of this thesis was to characterize the development of crystalline powellite (CaMoO₄ and related phases) and oxyapatite (Ca₂LN₈Si₆O₂₆) in borosilicate glass-ceramics and to determine how the formation of those phases affected its chemical durability.

Borosilicate glasses provided by PNNL were re-melted and quenched at rates from over 300⁰C/s to ~0.05⁰C/s. Isothermal heat treatment experiments were conducted by quenching melts …

Modulated Photothermal Radiometry: Detector Sensitivity Study And Experimental Setup, Jessica Nicole Seals

Masters Theses

"This thesis outlines the development of a system used for determining the surface thermal diffusivity of both non-irradiated and irradiated materials. The motivation for this work is to establish a modulated photothermal radiometry (PTR) system on the campus of Missouri University of Science and Technology. One of the main efforts described in this thesis is the design and construction of the physical apparatus. Along the way, it was necessary to perform a detailed sensitivity analysis of the system to determine whether the expected signal emitted from the sample falls within the bounds of detectivity for the HgCdTe (MCT) detector used …

Practical Dwell Times For Switched System Stability With Smart Grid Application, William Roy St. Pierre

Masters Theses

"Switched systems are encountered throughout many engineering disciplines, but confirming their stability is a challenging task. Even if each subsystem is asymptotically stable, certain switching sequences may exist that drive the overall system states into unacceptable regions. This thesis contains a process that grants stability under switching to switched systems with multiple operating points. The method linearizes a switched system about its distinct operating points, and employs multiple Lyapunov functions to produce modal dwell times that yield stability. This approach prioritizes practicality and is designed to be useful for large systems with many states and subsystems due to its ease …

Tvs Transient Behavior Modeling Method, And System-Level Effective Esd Design For Usb3.X Interface, Pengyu Wei

Masters Theses

"This research proposal presents a methodology whereby a protection device can be modeled in SPICE compatible platforms with respect to the transient behaviors during Electrostatic Discharge (ESD) events. This methodology uses an exclusively "black-box" approach to characterize the parameters of the protection device, thereby allowing it to be implemented without intimate knowledge of the DUT. Results of this methodology can be used to predict the transient response (conductivity modulation and snapback delay) of the ESD protection devices, and thereby predicts how much current could flow into the device (typically a digital IO pin) under protection. The transient behavior modeling methodology …

Conical Folds -- An Artifact Of Using Simple Geometric Shapes To Describe A Complex Geologic Structure, Avery Joseph Welker

Masters Theses

"Accurate representation of the 3D shapes of natural folds is essential to characterization of the dynamic models for fold formation. Geometrical analysis of folds commonly relies upon analyzing patterns defined by the variation in the orientation of poles to planar surfaces deformed by a shortening event when plotted using graphical calculators (e.g., stereogram, polar tangent diagrams) to interpret the shape of folds. Stereograms for which orientation data define small circles are classified as non-cylindrical regular folds and are interpreted as "conical folds," where the shape of the fold is represented by a cone that terminates at a point. Utilizing similar …

Spatial Resolution Study For Magnetic Near-Field Probe, Xin Yan

Masters Theses

"Spatial resolution is an important factor of near-field probe, which represents the ability to distinguish two close radiation sources. Traditional definition of spatial resolution is the distance between peak point and -6dB point when measuring microstrip line. The definition has disadvantage and limitation. In this topic, spatial resolution for magnetic near-field probe is studied, and three dimensions of spatial resolution are put forward. An optimized measurement setup is presented to reflect spatial resolution of probe properly. Then, an example is given to show how spatial resolution affects field distribution in near-field measurement"--Abstract, page iv.

System Level Power Integrity Transient Analysis Using A Physics-Based Approach, Jun Xu

Masters Theses

"With decreasing supply voltage level and massive demanding current on system chipset, power integrity design becomes more and more critical for system stability. The ultimate goal of well-designed power delivery network (PDN) is to deliver desired voltage level from the source to destination, in other words, to minimize voltage noise delivered to digital devices. The thesis is composed of three parts. The first part focuses on-die level power models including simplified chip power model (CPM) for system level analysis and the worst scenario current profile. The second part of this work introduces the physics-based equivalent circuit model to simplify the …

The Thermal Effects Of Daylighting In An Energy Efficient Home, Thomas Glenn Yarbrough Ii

Masters Theses

"Current trends in building design and construction emphasize the use of natural daylighting to illuminate a building's interior. This study investigated the energy savings that could be obtained through the use of daylighting compared to additional heating and cooling loads attributed to the glazing required for daylighting. The study, through a combination of experimentation and computer model validation, aimed to determine energy saved from daylighting through illumination metering during a nine-month study period. Energy usage trends during this period were observed using circuit-level monitoring equipment. It was determined that, at select times of the year, energy used to account for …

Comparative Toxicology Of Nio And Ni(Oh)₂ Nanoparticles, Melissa Hope Cambre

Masters Theses

“Understanding the potential toxicity of nanoparticles (NPs) is important to ensure that these new products do not impose harmful effects to human and environmental health. Paper I is a literature review in which we discuss characteristics of nanomaterials, with an emphasis on transition metal oxide nanoparticles that influence cytotoxicity. Identification of those properties may lead to the design of more efficient and safer nanosized products for various industrial purposes and provide guidance for assessment of human and environmental health risk. We then investigate biochemical and molecular mechanisms of cytotoxicity that include oxidative stress-induced cellular events and alteration of the pathways …

Coaxial Cable Ring Resonator Based On Pair Sided Coaxial Cable Bragg Grating Coupler For Sensing Appllication, Xiaotong Tang

Masters Theses

“Coaxial cable based devices, such as coaxial cable Bragg grating (CCBG), coiled coaxial cable resonator have been demonstrated for sensing applications to address the challenges faced by fiber optic sensors (e.g., large strain survivability, installation). Inspired by the fiber ring resonator (FRR), coaxial cable based ring resonator (CCRR) is reported in this thesis. The device mainly formed by a homemade coaxial cable Bragg grating (CCBG) pair based side coupler. Comparing to the commercial coupler, CCBG-SC improves the flexibility of the device for sensing applications. The coupling frequency of the CCBG-based coupler can be modified by changing the grating length and …

Distributed Fiber Optic Sensors For Monitoring Spatially Continuous Strain And Quasi-Distributed Refractive Index Using Optical Frequency Domain Reflectometry, Sasi Jothibasu

Masters Theses

"This thesis is comprised of two papers and they describe distributed fiber optic sensing using an optical frequency domain reflectometry (OFDR) instrumentation system.

The first paper presents about distributed fiber optic sensor embedded within the layers of a composite laminates to monitor the continuous profile of strain using the optical frequency domain reflectometry (OFDR) system. The OFDR system was used to analyze the Rayleigh backscattered signal. The shift in the Rayleigh backscattered spectrum (RBS) was observed to be linearly related to the change in strain of the composite material. The continuous strain sensing using OFDR was demonstrated by an INSTRON …

Advanced Process To Embed Optical Fiber Sensors Into Casting Mold For Smart Manufacturing, Raghavender Reddy Jakka

Masters Theses

"Optical fiber sensors embedded in metals with distributed sensing can sense temperature at multiple points with single fiber. This is useful for smart manufacturing like structural health monitoring in aerospace industry and smart molds in manufacturing plants. There is a huge difference in thermal coefficient of expansion for fiber and metal. This is the reason for the increase in sensitivity for embedded fiber sensors. However, at high temperatures, the stress on the fiber increases, eventually damaging the sensor. The fiber-metal interface determines the sensor performance. A tight interface results in high sensitivity and a gap in the interface enhances sensing …

Carbon Black Production, Analyzing And Characterization, Shadha Khalid Jebur

Masters Theses

"Carbon black (CB) plays a significant function in the development of the electrical and mechanical properties of high performance for a tough elastic polymeric substance such as rubber materials. Thus, CB is widely used to manufacture a massive number of products such as reinforcing and pigment phase in automobile tires due to its high ability to increase tire life by reducing the thermal damage. This material is also used in belts, hoses, and other non-tire rubber goods. Before use in valuable materials. CB should first be analyzed and characterized by different instruments to obtain its mechanical properties. A new thermal …

Reputation And Credit Based Incentive Mechanism For Data-Centric Message Delivery In Delay Tolerant Networks, Himanshu Jethawa

Masters Theses

"In a Data-centric Delay Tolerant Networks (DTNs), it is essential for nodes to cooperate in message forwarding in order to enable successful delivery of a message in an opportunistic fashion with nodes having their social interests defined. In the data-centric dissemination protocol proposed here, a source annotates messages (images) with keywords, and then intermediate nodes are presented with an option of adding keyword-based annotations in order to create higher content strength messages on path toward the destination. Hence, contents like images get enriched as there is situation evolution or learned by these intermediate nodes, such as in a battlefield, or …

Development Of Hollow Coaxial Cable Fabry Perot Resonator For High Temperature Sensing Applications, Mohammed Farhan Ahmed

Masters Theses

"The thesis is comprised of two papers, the first paper presents the novel High-Quality Factor Coaxial Cable Fabry-Perot Resonator for sensing applications. The sensor is fabricated by creating two highly reflective mirrors in a coaxial cable. The temperature response of the sensor was tested, by monitoring the frequency shift of the reflection spectra as the temperature increased linearly from 35 °C to 80 °C in steps of 5 °C. The sensor exhibited high temperature sensitivity and good measurement resolution.

A high Q factor of 133 was recorded. The second paper in the thesis presents a low cost, robust, homemade hollow …

Bifunctional Porous Polymeric Fiber As A Catalyst For N-Phenylglycine Synthesis And Carbonation Of Propylene Oxide To Propylene Carbonate, Ahmed Abdulghani Almuslem

Masters Theses

"In this study, development of a polymeric bi-functional porous catalyst that can be used in various applications such as batch, packed-bed, and continuous flow reactors and the formation of highly important chemicals that have many applications in the industry. With this material many homogenous reactions can be conducted in heterogeneous environment which is more efficient and profitable. The catalyst was formed by grafting hollow fiber with APS then immobilized with Br using 1,2-dibromoprobane (Br/APS/PAI-HFs). The formed catalyst was tested with BET and FTIR to confirm the immobilization of Br. A porous polymeric material Br/APS/PAI-HFs provides the ability for ring opining …

Ceria Nanostructured Catalysts For Conversion Of Methanol And Carbon Dioxide To Dimethyl Carbonate, Jawad Hassan A Al Drwish

Masters Theses

"In this study, three different shapes of ceria (CeO₂) nanostructures (e.g., nanooctahedra, nanocubes and nanorods) were synthesized via the hydrothermal method and screened for carbonylation reaction. Of these three shapes of nanostructures, the nanorod was doped with metals such as Ca, Ni, Cu, and Co by wet impregnation method. All materials were characterized by XRD, NH₃/CO₂-TPD, XRF, FTIR and N₂ physorption to determine the crystal size and phases, acid-base properties, metal loading, and surface properties. The obtained materials were employed as catalysts for the activation of Carbon Dioxide (CO₂) and methanol …

Cyclic Axial Compression Behavior Of Concrete-Filled Hybrid Large Rupture Strain Frp Tubes, Monika Nain

Masters Theses

"This study introduces an experimental investigation of the behavior of concrete filled fiber reinforced polymer (FRP) tubes (CFFTs) under cyclic axial compression. The FRP used in this study were either small rupture strain FRP (SRS-FRP) or large rupture strain FRP (LRS-FRP). This paper also presents the first-ever experimental study on the behavior of concrete confined using hybrid LRS-FRP and SRS-FRP. LRS-FRP included PEN (polyethylene napthalate) and PET (polyethylene terephthalate) where both of them having ultimate axial strain larger than 5%, and low stiffness. SRP-FRP included carbon and glass FRP having small rupture strains, smaller than 2%, and high stiffness. The …