Digital Commons Network^™

Removal Of Boron From Produced Water By Co-Precipitation / Adsorption For Reverse Osmosis Concentrate, Imran Yusuf Rahman, Yarrow Nelson, Tryg Lundquist

Master's Theses

Co-precipitation and absorption methods were investigated for removal of boron from produced water, which is groundwater brought to the surface during oil and natural gas extraction. Boron can be toxic to many crops and often needs to be controlled to low levels in irrigation water. The present research focused on synthetic reverse osmosis (RO) concentrate modeled on concentrate expected from a future treatment facility at the Arroyo Grande Oil Field on the central coast of California. The produced water at this site is brackish with a boron concentration of 8 mg/L and an expected temperature of 80°C. The future overall …

Mechanisms For Temporal Change In Phytoplankton Composition In San Luis Obispo Bay California, Marc T. Tognazzini

Master's Theses

Coastal topography and more specifically, the impact of local hydrography can significantly influence phytoplankton dynamics along the California coast. In San Luis Obispo Bay California, the local hydrography is influenced by the presence of a lee and proposed upwelling shadow in the northwest corner of the bay. These conditions allow for periods of unperturbed phytoplankton growth creating phytoplankton incubation areas. Phytoplankton dynamics including accumulation, advection, and composition were examined in San Luis Obispo Bay California from January to June 2004 using all the primary techniques of ocean monitoring encompassed in the coastal module of the Global Ocean Observing System. These …

Development Of A High Performance Micropropulsion System For Cubesats, Christopher Lorian Biddy

Master's Theses

Picosatellites are defined as satellites with a mass between 0.1 and 1kg (Miniaturized satellite). Picosatellites are typically designed to work together or function in formations (Miniaturized satellite). A specific type of Picosatellite known as CubeSats were introduced in 1999 and since then have increased in popularity so that there are now over 80 CubeSat programs around the world. CubeSats are defined as cubic units 10cm on each side and no more than 1kg in mass. CubeSats are required to conform to the CubeSat Standard created by California Polytechnic State University and Stanford University and be compatible with Cal Poly’s P-POD …

Performance Analysis And Life Prediction For Small Wind Turbine Blades: A Wood Laminate Case Study, Christopher James Nosti

Master's Theses

A detailed study of the fatigue life of wooden wind turbine blades for a new 10 kilowatt system was undertaken. A numerical model of the blades was created using the technical software package MATLAB in order to estimate the maximum stress occurring within the blade in response to changes in wind velocities based on a wind profile approximating the location where these turbines are expected to operate. The material properties of the wooden laminate were measured using an Instron tensile test machine and were found to be in line with published values. In parallel with this effort, a three dimensional …

Moving Towards Self-Reliance: Living Conditions Of Refugee Camps In Lebanon And Opportunities For Development, Dana Masad

Master's Theses

Refugee camps in Lebanon are harsh, continuously and rapidly deteriorating environments. In addition to poverty, numerous wars and the restrictions of civil rights, refugee camps that were not designed as a long-term settlement were made to accommodate their residents in addition to their descendents for a period that has lasted over 59 years. Since the establishment of the camps in 1948 the Palestinian refugees in Lebanon have fallen victim to multiple wars and as a result most camps have witnessed major destruction of homes and infrastructure, and a few were entirely destroyed. Today, the planning and development of the camps …

Metamorphism And Putative Bioalteration Of Basaltic Glass : Coast Range Ophiolite, Cynthia E. Schultz

Master's Theses

No abstract provided.

Design And Development Of Rapid Battery Exchange Systems For Electric Vehicles To Be Used As Efficient Student Transportation, Jonathan A. Bevier

Master's Theses

Rapid battery exchange systems were built for an electric van and pedal assist electric bike as a method of eliminating the need to recharge the vehicles batteries in order to increase the feasibility of using electric propulsion as a method of efficient student transportation. After selecting proper materials it was found that the systems would need a protective coating to ensure consistent operation. 1020 cold rolled steel samples coated with multiple thicknesses of vinyl resin paint, epoxy resin paint, and powder coating were subjected to environmental wear tests in order to determine if the type and thickness of common protective …

On-Board Orbit Determination And 3-Axis Attitude Determination For Picosatellite Applications, John Arthur Bowen

Master's Theses

This thesis outlines an orbit determination and 3-axis attitude determination system for use on orbit as applicable to 1U CubeSats and other picosatellites. The constraints imposed by the CubeSat form factor led to the need for a simple configuration and relaxed accuracy requirements. To design a system within the tight mass, volume, and power constraints inherent to CubeSats, a balance between hardware complexity, software complexity and accuracy is sought. The proposed solution consists of a simple orbit propagator, magnetometers with a magnetic field look-up table, Sun sensors with an analytic Sun direction model, and the TRIAD method to combine vector …

Facility Power Usage Prediction With Artificial Neural Networks, Sunny Wan

Master's Theses

Residential and commercial buildings accounted for about 68% of the total U.S. electricity consumption in 2002. Improving the energy efficiency of buildings can save energy, reduce cost, and protect the global environment.

In this research, artificial neural network is employed to model and predict the facility power usage of campus buildings. The prediction is based on the building and the weather conditions such as temperature, humidity, wind speed, etc. Various neural network configurations are discussed; satisfactory computer simulation results are obtained and presented.

Feeding Phishers, Nicholas J. Lynch

Master's Theses

Phishing campaigns continue to deceive users into revealing their credentials, despite advancing spam filters, browser and toolbar warnings, and educational efforts. Recently, researchers have begun investigating how fake credentials --- or honeytokens --- can be used to detect phishing sites and protect users. BogusBiter, one such work, creates sets of honeytokens based on users' real credentials and sends them alongside real user submissions to phishing sites. In this paper, we present Phish Feeder, an anti-phishing tool which extends the BogusBiter honeytoken generation algorithm in order to create more realistic and authentic-looking credentials. Phish Feeder also employs a ``honeytoken repository'' which …

Plant Growth Regulator Sprays And Girdling: Potential Horticultural Techniques To Increase Fruit Retention And Yield Of Longan (Dimocarpus Longan Lour.) Trees In California, Leila Anne Graves

Master's Theses

Abstract Plant Growth Regulator Sprays and Girdling: Potential Horticultural Techniques to Increase Fruit Retention and Yield of Longan (Dimocarpus longan Lour.) Trees in California Leila Graves June 2009 The longan is a subtropical fruit tree whose popularity is growing quickly among American consumers, and thus, could become a lucrative niche market for California growers. Trees planted as part of an initial variety trial conducted in commercial California orchards are beginning to bear fruit. However, fruit retention and yields are low due to excessive abscission during early fruit set. Horticultural techniques, such as plant growth regulator (PGR) sprays and girdling, often …

Robust Unconstrained Face Detection And Lip Localization Using Gabor Filters, Robert E. Hursig

Master's Theses

Automatic speech recognition (ASR) is a well-researched field of study aimed at augmenting the man-machine interface through interpretation of the spoken word. From in-car voice recognition systems to automated telephone directories, automatic speech recognition technology is becoming increasingly abundant in today’s technological world. Nonetheless, traditional audio-only ASR system performance degrades when employed in noisy environments such as moving vehicles. To improve system performance under these conditions, visual speech information can be incorporated into the ASR system, yielding what is known as audio-video speech recognition (AVASR). A majority of AVASR research focuses on lip parameters extraction within controlled environments, but these …

Solar Power For Deployment In Populated Areas, Nathan Andrew Hicks

Master's Theses

The thesis presents background on solar thermal energy and addresses the structural challenges associated with the deployment of concentrating solar power fields in urban areas. Two potential structural systems and urban locales of deployment are proposed and investigated to determine whether they have the potential to be a cost-effective renewable energy solution for urban areas. The structural issues explored in the thesis include flutter, the wind loading of open frame structures, performance-based design, and the design of flexibly mounted equipment on a building.

The Effect Of Particle Surface Area To Volume Ratio On Ion Release From Cocr Spheres, Darin J. Grandfield

Master's Theses

In 2005, over 200,000 Americans underwent a hip arthroplasty, the replacement of a hip joint with an artificial prosthesis. Of these arthroplasties, metal-on-metal type implants represent an increasing usage percentage. Metal-on-metal implants are selected largely for their low volumetric wear rate, durability, and resistance to corrosion. In spite of these advantages, little is known concerning the long-term consequences of heavy metal alloy use in the body, although early research indicates potentially carcinogenic results. This thesis is a preliminary investigation into these long term effects and their root causes.

An improved comprehension of the corrosion kinetics and the rate of ion …

Evaluating The Electrical Response Of Polyaniline To Mechanical Strain, Matthew L. Goebel

Master's Theses

This thesis focuses on the electrical output of polyaniline films subjected to uniaxial strain in hydrochloric acid solutions. Polyaniline belongs to novel class of materials known as conducting polymers. Alternating single and double bonds in the backbone of conducting polymers allow them to transmit electric charge when they are doped with negatively charged ions. Modifying the degree of doping and other electrical/chemical treatments allow conducting polymers to exhibit conducting, semi-conducting, or insulating electrical properties. Resilient mechanical properties, good processability, and low cost make conducting polymers good candidates for applications traditionally held by metals and semi-conductors.

When tensile strain is applied …

Does Student Leadership Participation Enhance The Development Of Emotional Intelligence, Michelle Breanne Curro

Master's Theses

Emotional Intelligence is believed to explain how emotions may be used, monitored, and measured to predict workplace success and failure, the suggestion that if individuals can balance the emotions within themselves and others, they can use their skills to better their organization. This study explored the development of Emotional Intelligence in the ASI Student Manager Team in comparison to Student Government members at California Polytechnic State University, San Luis Obispo (Cal Poly) during the fall 2008 quarter. The Bar-On Emotional Quotient Inventory (EQ-i) was used to assess student leaders’ Emotional Intelligence (EI) development (N = 27). A two sample t-test …

A Study Of Dempster-Shafer's Theory Of Evidence In Comparison To Classical Probability Combination, Scott J. Seims

Master's Theses

ABSTRACT

A Study of Dempster-Shafer’s Theory of Evidence in Comparison to Classical Probability Combination

Scott J. Seims

This thesis is an assessment on the effectiveness of Dempster-Shafer’s Theory of Evidence in comparison to Classical Probabilistic Combination as it applies to Synthetic Aperture Radar (SAR) Automatic Target Recognition (ATR). A three feature based classifier (peaks, corners and edges) ATR system is presented. These classifiers are assumed to be independent. The results of both the weight-based Maximum Likelihood and Dempster-Shafer’s Theory of Evidence data fusion techniques are presented.

Using Dempster-Shafer an accuracy of 77.50 percent is obtained, which is less than the …

General Direction Routing Protocol, Sean Michael Lydon

Master's Theses

The General Direction Routing Protocol (GDRP) is a Wireless Sensor Network (WSN)

multi-path routing protocol which abstracts localization information (commonly GPS

coordinates) into relative direction information in order to perform routing decisions. By

generating relative direction information GDRP is able to operate with fewer precision

requirements than other protocols. This abstraction also allows the integration of other emerging

hardware-based localization techniques, for example, Beamforming Sensor Arrays.

GDRP does not specifically address the next hop a packet should take, but instead specifies a

direction it should travel. This direction abstraction allows for multiple paths to be taken through

the network thus …

Affine Region Tracking And Augmentation Using Mser And Adaptive Sift Model Generation, Matthew James Marano

Master's Theses

Relatively complex Augmented Reality (AR) algorithms are becoming widely available due to advancements in affordable mobile computer hardware. To take advantage of this a new method is developed for tracking 2D regions without a prior knowledge of an environment and without developing a computationally expensive world model. In the method of this paper, affinely invariant planar regions in a scene are found using the Maximally Stable Extremal Region (MSER) detector. A region is selected by the user to define a search space, and then the Scale Invariant Feature Transform (SIFT) is used to detect affine invariant keypoints in the region. …

Jdiet: Footprint Reduction For Memory-Constrained Systems, Michael John Huffman

Master's Theses

Main memory remains a scarce computing resource. Even though main memory is becoming more abundant, software applications are inexorably engineered to consume as much memory as is available. For example, expert systems, scientific computing, data mining, and embedded systems commonly suffer from the lack of main memory availability.

This thesis introduces JDiet, an innovative memory management system for Java applications. The goal of JDiet is to provide the developer with a highly configurable framework to reduce the memory footprint of a memory-constrained system, enabling it to operate on much larger working sets. Inspired by buffer management techniques common in modern …

Multidisciplinary Design Optimization Of An Extreme Aspect Ratio Hale Uav, Bryan J. Morrisey

Master's Theses

ABSTRACT

Multidisciplinary Design Optimization of an Extreme Aspect Ratio HALE UAV

Bryan J. Morrisey

Development of High Altitude Long Endurance (HALE) aircraft systems is part of a vision for a low cost communications/surveillance capability. Applications of a multi payload aircraft operating for extended periods at stratospheric altitudes span military and civil genres and support battlefield operations, communications, atmospheric or agricultural monitoring, surveillance, and other disciplines that may currently require satellite-based infrastructure. Presently, several development efforts are underway in this field, including a project sponsored by DARPA that aims at producing an aircraft that can sustain flight for multiple years and …

Development Of An Integrated Gaussian Process Metamodeling Application For Engineering Design, Collin R. Baukol

Master's Theses

As engineering technologies continue to grow and improve, the complexities in the engineering models which utilize these technologies also increase. This seemingly endless cycle of increased computational power and demand has sparked the need to create representative models, or metamodels, which accurately reflect these complex design spaces in a computationally efficient manner. As research into metamodeling and using advanced metamodeling techniques continues, it is important to remember design engineers who need to use these advancements. Even experienced engineers may not be well versed in the material and mathematical background that is currently required to generate and fully comprehend advanced complex …

Boundless Fluids Using The Lattice-Boltzmann Method, Kyle J. Haughey

Master's Theses

Computer-generated imagery is ubiquitous in today's society, appearing in advertisements, video games, and computer-animated movies among other places. Much of this imagery needs to be as realistic as possible, and animators have turned to techniques such as fluid simulation to create scenes involving substances like smoke, fire, and water. The Lattice-Boltzmann Method (LBM) is one fluid simulation technique that has gained recent popularity due to its relatively simple basic algorithm and the ease with which it can be distributed across multiple processors. Unfortunately, current LBM simulations also suffer from high memory usage and restrict free surface fluids to domains of …

Time-Frequency Analysis Of Intracardiac Electrogram, Erik Brockman

Master's Theses

The Cardiac Rhythm Management Division of St. Jude Medical specializes in the development of implantable cardioverter defibrillators that improve the quality of life for patients diagnosed with a variety of cardiac arrhythmias, especially for patients prone to sudden cardiac death. With the goal to improve detection of cardiac arrhythmias, this study explored the value in time-frequency analysis of intracardiac electrogram in four steps. The first two steps characterized, in the frequency domain, the waveforms that construct the cardiac cycle. The third step developed a new algorithm that putatively provides the least computationally expensive way to identifying cardiac waveforms in the …

Hyperspectral Image Compression Using A Two-Stage Klt, Seton S. Schroeder

Master's Theses

A computationally efficient, lossy, bandwidth compression scheme for hyperspectral imagery is presented. In certain cases, the direct application of the standard KLT algorithm over an entire data set is not practical. The data may be too large for efficient processing by one encoder and so portions of the entire data set may necessarily be sampled by different encoders. The algorithm proposed handles such a limitation by leveraging the standard JPEG 2000 technology. The component decorrelation of the JPEG 2000 (extension 2) is replaced with a two-stage Karhunen-Loeve Transformation (KLT) operation resulting in a reduction in the computational complexity. At the …

Non-Linear Contact Analysis Of Meshing Gears, Chun Hung Lee

Master's Theses

Gear transmission systems are considered one of the critical aspects of vibration analysis, and it contains various potential faults such as misalignment, cracks, and noise. Therefore, it requires vibration monitoring to ensure the system is operating properly. Case mounted accelerometers are frequently used to monitor frequencies in a system. However, it is not a simple task to identify and interpret the acceleration data since there are many gear mesh frequencies present. One of the approaches utilized by researchers to perform gear diagnostic is Finite Element Modeling. This study focuses on stiffness cycle and meshing stiffness of non-linear quasi-static finite element …

Design Evaluation Of An Anaerobic Chamber Prototype, Anthony M. Kendig

Master's Theses

Within the field of microbiology there is a group of bacteria termed, anaerobic, because of their aversion to oxygen. Clinical and industrial interest in these bacteria has made the use of anaerobic systems necessary for widespread testing and research. The glove-less anaerobic chamber has become the premier method for successful cultivation of anaerobic isolates. A prototype anaerobic chamber design contains new features and different anaerobic techniques formed around additional specifications given by microbiologists. Through testing and discussion of the anaerobic systems of this prototype, the design is evaluated based on its anaerobic performance. The three chamber systems that maintain the …

Mechanical Simulation Of Articular Cartilage Based On Experimental Results, Kevin Matthew Stewart

Master's Theses

Recently, a constituent based cartilage growth finite element model (CGFEM) was developed in order to predict articular cartilage (AC) biomechanical properties before and after growth. Previous research has noted limitations in the CGFEM such as model convergence with growth periods greater than 12 days. The main aims of this work were to address these limitations through (1) implementation of an exact material Jacobian matrix definition using the Jaumann-Kirchhoff (J-K) method and (2) quantification of elastic material parameters based upon research findings of the Cal Poly Cartilage Biomechanics Group (CPGBG). The J-K method was successfully implemented into the CGFEM and exceeded …

Investigating The Roles Of Ndj1 And Tid1 In Distributive Segregation Using Non-Exchange Chromosomes, Jonathan V. Henzel

Master's Theses

Meiosis is a specialized cell division that leads to a reduction of ploidy in sexually reproducing organisms through segregation of homologous chromosomes at the first meiotic division. Improper segregation of chromosomes during meiosis results in anueploidy, which is usually fatal during embryonic development. The meiotic process is therefore tightly regulated. Typically, proper segregation of homologs at meiosis I requires pairing of homologous chromosomes, followed by crossover recombination between homologs. Crossovers enable proper chromosomal segregation during the first meiotic division in part by establishing tension in the meiotic spindle. However, in the absence of crossovers, some cells maintain the ability to …

Advanced Thermosonic Wire Bonding Using High Frequency Ultrasonic Power: Optimization, Bondability, And Reliability, Minh-Nhat Ba Le

Master's Theses

Gold wire bonding typically uses 60 KHz ultrasonic frequency. Studies have been reported that increasing ultrasonic frequency from 60KHz to 120KHz can decrease bonding time, lower bonding temperature, and/or improve the bondability of Au metalized organic substrates. This thesis presents a systematic study of the effects of 120 KHz ultrasonic frequency on the reliability of fine pitch gold wire bonding. Two wire sizes, 25.4 and 17.8 μm in diameter (1.0 and 0.7 mil, respectively) were used. The gold wires were bonded to metalized pads over organic substrates with five different metallization. The studies were carried out using a thermosonic ball …