Digital Commons Network^™

Hyperspectral Image Compression Using A Two-Stage Klt, Seton S. Schroeder

Master's Theses

A computationally efficient, lossy, bandwidth compression scheme for hyperspectral imagery is presented. In certain cases, the direct application of the standard KLT algorithm over an entire data set is not practical. The data may be too large for efficient processing by one encoder and so portions of the entire data set may necessarily be sampled by different encoders. The algorithm proposed handles such a limitation by leveraging the standard JPEG 2000 technology. The component decorrelation of the JPEG 2000 (extension 2) is replaced with a two-stage Karhunen-Loeve Transformation (KLT) operation resulting in a reduction in the computational complexity. At the …

Non-Linear Contact Analysis Of Meshing Gears, Chun Hung Lee

Master's Theses

Gear transmission systems are considered one of the critical aspects of vibration analysis, and it contains various potential faults such as misalignment, cracks, and noise. Therefore, it requires vibration monitoring to ensure the system is operating properly. Case mounted accelerometers are frequently used to monitor frequencies in a system. However, it is not a simple task to identify and interpret the acceleration data since there are many gear mesh frequencies present. One of the approaches utilized by researchers to perform gear diagnostic is Finite Element Modeling. This study focuses on stiffness cycle and meshing stiffness of non-linear quasi-static finite element …

Design Evaluation Of An Anaerobic Chamber Prototype, Anthony M. Kendig

Master's Theses

Within the field of microbiology there is a group of bacteria termed, anaerobic, because of their aversion to oxygen. Clinical and industrial interest in these bacteria has made the use of anaerobic systems necessary for widespread testing and research. The glove-less anaerobic chamber has become the premier method for successful cultivation of anaerobic isolates. A prototype anaerobic chamber design contains new features and different anaerobic techniques formed around additional specifications given by microbiologists. Through testing and discussion of the anaerobic systems of this prototype, the design is evaluated based on its anaerobic performance. The three chamber systems that maintain the …

Mechanical Simulation Of Articular Cartilage Based On Experimental Results, Kevin Matthew Stewart

Master's Theses

Recently, a constituent based cartilage growth finite element model (CGFEM) was developed in order to predict articular cartilage (AC) biomechanical properties before and after growth. Previous research has noted limitations in the CGFEM such as model convergence with growth periods greater than 12 days. The main aims of this work were to address these limitations through (1) implementation of an exact material Jacobian matrix definition using the Jaumann-Kirchhoff (J-K) method and (2) quantification of elastic material parameters based upon research findings of the Cal Poly Cartilage Biomechanics Group (CPGBG). The J-K method was successfully implemented into the CGFEM and exceeded …

Acute Nitrate Exposure Causes Proteomic Changes Consistent With The Regulation Of Reactive Oxygen And Nitrogen Species, Lauren R. Hitt, Lars Tomanek

Master's Theses

Nitrate is the most common ionic form of nitrogen in aquatic ecosystems. Although nitrate is known to affect ecosystems at high levels through eutrophication, hypoxia and loss of biodiversity, it is considered to be physiologically inert to the individual aquatic organism. To test the physiological effects of nitrate on aquatic life, we exposed gill tissue of the Pacific oyster, Crassostrea gigas, to nitrate and characterized changes in protein expression, using a gel-based proteomics approach. Of the 642 protein spots detected, we found that 24 proteins (15 identified) changed expression in response to a 6-hour exposure to nitrate concentrations ranging from …

Internet-Scale Reactive Routing And Mobility, Daniel B. Nelson

Master's Theses

Since its commercialization, the Internet has grown exponentially. A large variety of devices can communicate creating advanced services for a diverse ecosystem of applications. However, as the number of Internet hosts has grown, the size of routing tables required to correctly route data between them has also increased exponentially. This growth rate necessitates increasingly frequent upgrades to routing device hardware, providing them with additional memory for fast-access storage of route information. These upgrades are both physically and fiscally untenable, and a new Internet routing solution is necessary for future growth.

This research focuses around an incrementally deployable, reactive routing system …

City Of Patterson Sustainability Plan, Colin Brian Clarke

Master's Theses

This Master’s Thesis / Professional Project is a Sustainability Plan developed for the City of Patterson, California. The Patterson Sustainability Plan (PSP) was developed concurrently with the General Plan Update, and will be presented to the City for adoption within a year. The Sustainability Plan will help inform decision-making by way of its Goals and Actions for implementation to improve community sustainability. Before the plan was developed, background research was conducted that included a Best Practices Review to assess what other cities are doing to address sustainability, a Needs Assessment to evaluate existing conditions in Patterson and determine its unique …

An Approach Based On Wavelet Decomposition And Neural Network For Ecg Noise Reduction, Suranai Poungponsri

Master's Theses

Electrocardiogram (ECG) signal processing has been the subject of intense research in the past years, due to its strategic place in the detection of several cardiac pathologies. However, ECG signal is frequently corrupted with different types of noises such as 60Hz power line interference, baseline drift, electrode movement and motion artifact, etc. In this thesis, a hybrid two-stage model based on the combination of wavelet decomposition and artificial neural network is proposed for ECG noise reduction based on excellent localization features: wavelet transform and the adaptive learning ability of neural network. Results from the simulations validate the effectiveness of this …

Analysis & Design Of Improved Multiphase Interleaving Dc-Dc Converter With Input-Output Bypass Capacitor, Rudi Rudianto

Master's Theses

As the transistor count per chip in computer microprocessors surpasses one billion, the semiconductor industry has become more and more concerned with meeting processor’s power requirements. This poses a design challenge for the power supply module, especially when the processor operates at low voltage range. For example, the electrical requirement for the newest Intel microprocessors has exceeded 100A with an input voltage of approximately 1V. To overcome this problem, multiphase DC-to-DC converters encased in a voltage regulator module (VRM) have become the standard means of supplying power to computer microprocessor.

This study proposes a new topology for the multiphase DC-to-DC …

Novel Current-Fed Boundary-Mode Parallel-Resonant Push-Pull Converter, Jonathan David Paolucci

Master's Theses

The inherent difficulty in designing high voltage power supplies is often compounded by demands of high reliability, high performance, and safe functionality. A proposed high step-up ratio DC-DC converter meets the exacting requirements of applications such as uninterruptible power systems, radar, and pulsed power systems. The proposed DC-DC converter topology combines a multi-phase buck input stage with a novel self-tracking zero-voltage-switching (ZVS) resonant output stage. Traditionally, the inclusion of multiple power processing stages within a power supply topology severely degrades the overall converter efficiency. Due to the inherent high efficiency per stage, however, this effect is minimized. The self-tracking switching …

A Graphical Approach To Testing Real-Time Embedded Devices, Steven M. Day

Master's Theses

Software Testing is both a vital and expensive part of the software development lifecycle. Improving the testing process has the potential for large returns. Current testing methodologies used to test real-time embedded devices are examined and the weaknesses in them are exposed. This leads to the introduction of a new graphical testing methodology based on flowcharts. The new approach is both a visual test creation program and an automated execution engine that together frame a new way of testing. The new methodology incorporates flow-based diagrams, visual layouts, and simple execution rules to improve upon traditional testing approaches. The new methodology …

An Investigation Of E-Glass Structure With Different Filler Material Under Vibration And Bending Loading, John R. Parra

Master's Theses

Although fiberglass reinforced polyester manholes and wetwalls have been proven by the American Society for Testing Materials (ASTM) and are currently being used in some parts of the world, there still exists a lack of investigation for testing manhole covers made with different inorganic fillers under static and dynamic behavior. The filler would not only improve the mechanical properties of fiber-reinforced polymer matrix composite not otherwise achieved by the resin ingredients alone but also lower the overall manufacturing costs by decreasing the amount of fiber content without adversely affecting the composite’s mechanical properties. The main objective involved the development of …

Computers For The Masses: The American Socio-Technological Change Of The 1970'S And 1980'S, Robert Bryan Goodman

Master's Theses

This thesis developed out of my personal curiosity on the subject of high-technological development. Specifically, high-technology’s shift from primarily a military tool to a consumer product raised several questions to answer since first taking an interest in the subject. My lifestyle, like many other Americans in my generation, incorporates computers, cell-phones, and video game consoles as not only an innovative tool, but a standard and necessary mode of production. In our contemporary society, technology is obtainable everywhere. As an entertaining tool in the form of video games to a productivity tool in our workplaces, most individuals have assimilated consumer electronics. …

Prestressing Concrete With Shape Memory Alloy Fibers, Skye M. Orvis

Master's Theses

Concrete is considerably stronger in compression than it is in tension. When cracks form in concrete members, the flexural stiffness of the member decreases and the deflection increases which increases the overall size of the member. Prestressing concrete remedies this problem by inducing a compressive stress in the concrete thereby reducing the net tension in the member and increasing the load required to crack the member. Traditional prestressing is generally limited to large, straight members. During the last decade, shape memory alloys (SMA) have become more prevalent in engineering and civil engineering applications. The shape memory effect refers to the …

The Influence Of Incentives Offered By Local Governments To Private Developers Or Land Owners On The Rate Of Brownfield Redevelopment, Erik Benjamin Simon

Master's Theses

Redevelopment of brownfield sites has become increasingly popular since the inception of voluntary cleanup programs in the early to mid 1990’s. Local governments have begun to offer incentives to private developers or land owners to offset costs associated with contamination and encourage the redevelopment of properties that are typically underutilized. Incentives may take several forms including, but not limited to, fast-tracked project approval, risk based cleanup standards, liability relief, tax breaks, and direct funding assistance.

This study investigates how incentives that are offered by local governments to private developers or land owners influence the rate of redevelopment in their sphere …

Assessing Near-Field Outdoor Concentration Variability From Residential Wood Smoke Combustion Sources, Courtney E. Ward

Master's Theses

ABSTRACT Assessing Near-Field Outdoor Concentration Variability from Residential Wood Smoke Combustion Sources Courtney Ward The primary goal of this research was to determine whether near field effects from residential wood smoke emissions have a significant impact on acute and/or average PM2.5 concentrations, and therefore health risks. To this end, three primary research objectives were addressed: (1) measurement of the variability of wood smoke concentrations within a residential neighborhood with wood smoke sources, (2) establishment of whether the magnitude of near-source contributions to exposures can be estimated using typically available data, and (3) prediction of wood smoke concentrations using linear regression …

Santa Barbara Tea Fire Multi-Hazard Mitigation Benefit Cost Analysis, David S. Flamm

Master's Theses

ABSTRACT

Santa Barbara Tea Fire Multi-Hazard Mitigation Benefit Cost Analysis

David S Flamm

This study examines the benefits and costs associated with the outright purchase of properties for hazard mitigation (“property acquisition mitigation”) in Santa Barbara, California which reduced four properties’ exposure to multiple hazards. The results indicate that the estimated overall benefit-cost ratio for property acquisition mitigation projects is 1.75:1 when the exposed properties meet a threshold of eminent threat for total loss. This study further suggests that when property acquisitions are performed in an area threatened by multiple hazards the mitigation becomes two to three times more beneficial …

The Impact Of Lipid Percentage On Fibrous Cap Stability In Atherosclerotic Lesions, Anita Lorraine Crompton

Master's Theses

Coronary artery disease (CAD) is a common cause of sudden cardiac death. Much of the disease is not completely understood, which makes treatment and prevention difficult. Many researchers are using technology, such as advanced imaging techniques and finite element analysis, to better understand the disease. While there is much progress being made to look at the analysis of actual excised diseased arteries, there is still not a standardized model to predict the future of any one lesion. The purpose of this study is to explore the possibility of creating a standardized model to predict the mechanical stability of the fibrous …

Application Of Pv Panels In Large Multi-Story Buildings, Sara Kayal

Master's Theses

Application of PV Panels in Large Multi-Story Buildings Feasibility Study Sara Kayal

The awareness of global warming along with an ever increasing demand for a new source of energy has brought a strong interest in harnessing natural resources such as solar energy. This thesis evaluates the viability of applying photovoltaic (PV) panels in high-rise commercial buildings of around 20 stories. Specifically, the thesis is intended to provide a pre-planning tool during the early design stage for architects and designers who are considering the deployment of PV panels in new multi-story construction.

The first three chapters cover a comprehensive literature review …

Extraction Of Causal-Association Networks From Unstructured Text Data, Brett N. Bojduj

Master's Theses

Causality is an expression of the interactions between variables in a system. Humans often explicitly express causal relations through natural language, so extracting these relations can provide insight into how a system functions. This thesis presents a system that uses a grammar parser to extract causes and effects from unstructured text through a simple, pre-defined grammar pattern. By filtering out non-causal sentences before the extraction process begins, the presented methodology is able to achieve a precision of 85.91% and a recall of 73.99%. The polarity of the extracted relations is then classified using a Fisher classifier. The result is a …

Cost Minimization For Hot Gas Defrost System, Jarubutr Dansilasirithavorn

Master's Theses

Frost accumulation on evaporator coils has been a serious problem that decreases the efficiency of refrigeration systems. Many defrost methods have been used and hot gas defrost is the most common for industrial refrigeration applications. However, it is not a simple task to run an efficient hot gas defrost system. The duration and frequency of the defrost cycle should be properly determined so that the frost is melted but no additional heat transfer is transferred to the refrigerated space.

An experimental investigation was conducted at the Classic Salads Facility in Salinas, California. A single coil was instrumented to study frost …

Seismic Performance Of Unreinforced Masonry Walls Retrofitted With Post-Tensioning Tendons, Daniel Louis Lazzarini

Master's Theses

Unreinforced masonry (URM) structures have historically been regarded as structurally unsound in response to seismic events. The tendency for URM walls to collapse out-of-plane in a brittle manner is continually cause for concern. Retrofit of these walls is necessary in order to prevent severe damage and injury to occupants.

This paper is concerned with the retrofit of unreinforced masonry (URM) walls in response to out-of-plane loading. A retrofit design was developed and verified through structural testing. The selected retrofit technique incorporates vertical coring of URM walls to allow for the insertion of a single post-tensioning (PT) tendon. Tendons are spaced …

A Highly Abstracted Method Of Fpga-Based Development For Secondary Surveillance Radar Transpond Detection, James Penn Watt

Master's Theses

Traditional FPGA-based digital design is based on writing hardware definition language (HDL) code from scratch. Time to market, cost of development, and the level of training required for designers all can be reduced with a simplified and abstracted design strategy. This project intends to demonstrate a graphical user interface (GUI) layer of abstraction on top of existing commercially produced design aids including MATLAB, Simulink, and Xilinx System Generator. This project performs and demonstrates a specific implementation example of a Secondary Surveillance Radar (SSR) message decoder as proof-of-concept for the abstracted design method. The abstracted digital design methods shown in this …

Preparation And Characterization Of Electrospun Poly(D, L-Lactide-Co-Glycolide) Scaffolds For Vascular Tissue Engineering And The Advancement Of An In Vitro Blood Vessel Mimic, Tiffany Richelle Pena

Master's Theses

PREPARATION AND CHARACTERIZATION OF ELECTROSPUN POLY(D,L-LACTIDE-CO-GLYCOLIDE) SCAFFFOLDS FOR VASCULAR TISSUE ENGINEERING AND THE ADVANCEMENT OF AN IN VITRO BLOOD VESSEL MIMIC

Tiffany Richelle Peña

Currently, an estimated 1 in every 3 adult Americans are affected by one or more cardiovascular complications. The most common complication is coronary artery disease, specifically atherosclerosis. Outcomes of balloon angioplasty treatments have been significantly improved with the addition of drug eluting stents to the process. Although both bare metal and drug eluting stents have greatly increased the effectiveness of angioplasty and decreased the occurrence of restenosis, several complications still exist. For this reason, the stent …

Designing A Microbial Prolyl Peptidase Delivery System For The Treatment Of Celiac Disease, Matthew J. Shurtleff

Master's Theses

Celiac disease is an autoimmune enteropathy resulting from the ingestion of gluten and gluten-like proteins from wheat, barley and rye in afflicted individuals. Indigestible gluten-derived peptides rich in proline residues are known to be responsible for eliciting the inappropriate immune response characteristic of the disease. In this investigation, surface level expression of prolyl peptidase activity by genetically engineered probiotic lactobacilli was postulated to be a possible treatment for this disease. Plasmid-based reporter vectors were constructed utilizing a novel, homology-based cloning technique to assess the expression and localization signals from the S-layer protein gene of Lactobacillus acidophilus. These plasmids were mutated …

Simulation Of An Oxidizer-Cooled Hybrid Rocket Throat: Methodology Validation For Design Of A Cooled Aerospike Nozzle, Peter Alexander Brennen

Master's Theses

A study was undertaken to create a finite element model of a cooled throat converging/diverging rocket nozzle to be used as a tool in designing a cooled aerospike nozzle. Using ABAQUS, a simplified 2D axisymmetric model was created featuring only the copper throat and stainless steel support ring, which were brazed together for the experimental test firings. This analysis was a sequentially coupled thermal/mechanical model. The steady state thermal data matched closely to experimental data. The subsequent mechanical model predicted a life of over 300 cycles using the Manson-Halford fatigue life criteria. A mesh convergence study was performed to establish …

Advanced Thermosonic Wire Bonding Using High Frequency Ultrasonic Power: Optimization, Bondability, And Reliability, Minh-Nhat Ba Le

Master's Theses

Gold wire bonding typically uses 60 KHz ultrasonic frequency. Studies have been reported that increasing ultrasonic frequency from 60KHz to 120KHz can decrease bonding time, lower bonding temperature, and/or improve the bondability of Au metalized organic substrates. This thesis presents a systematic study of the effects of 120 KHz ultrasonic frequency on the reliability of fine pitch gold wire bonding. Two wire sizes, 25.4 and 17.8 μm in diameter (1.0 and 0.7 mil, respectively) were used. The gold wires were bonded to metalized pads over organic substrates with five different metallization. The studies were carried out using a thermosonic ball …

Design, Fabrication, And Implementation Of A Single-Cell Capture Chamber For A Microfluidic Impedance Sensor, Joshua-Jed Doria Fadriquela

Master's Theses

A microfluidic device was created for single-cell capture and analysis using polydimethylsiloxane (PDMS) channels and a glass substrate to develop a microfluidic single-cell impedance sensor for cell diagnostics. The device was fabricated using photolithography to create a master mold which in turn will use soft lithography to create the PDMS components for constant device production. The commercial software, COMSOLTM Multiphysics, was used to quantify the fluid dynamics in shallow micro-channels.

The device will be able to capture a cell and sequester it long enough to enable measurement of the impedance spectra that can characterize cell. The proposed device will be …

Investigating The Roles Of Ndj1 And Tid1 In Distributive Segregation Using Non-Exchange Chromosomes, Jonathan V. Henzel

Master's Theses

Meiosis is a specialized cell division that leads to a reduction of ploidy in sexually reproducing organisms through segregation of homologous chromosomes at the first meiotic division. Improper segregation of chromosomes during meiosis results in anueploidy, which is usually fatal during embryonic development. The meiotic process is therefore tightly regulated. Typically, proper segregation of homologs at meiosis I requires pairing of homologous chromosomes, followed by crossover recombination between homologs. Crossovers enable proper chromosomal segregation during the first meiotic division in part by establishing tension in the meiotic spindle. However, in the absence of crossovers, some cells maintain the ability to …

A Flight Simulation Study Of The Simultaneous Non-Interfering Aircraft Approach, Brian H. Reel

Master's Theses

Using a new implementation of a NASA flight simulation of the Quiet Short-Haul Research Aircraft, autopilots were designed to be capable of flying both straight in (ILS) approaches, and circling (SNI) approaches. A standard glideslope coupler was sufficient for most conditions, but a standard Proportional-Integral-Derivative (PID) based localizer tracker was not sufficient for maintaining a lateral track on the SNI course. To track the SNI course, a feed-forward system, using GPS steering provided much better results.

NASA and the FAA embrace the concept of a Simultaneous, Non-Interfering (SNI) approach as a way to increase airport throughput while reducing the noise …