Digital Commons Network^™

Vibration Health Monitoring Of Gears, Markus Josef Scherer

Master's Theses

Monitoring the health of vibrating gears is important to ensure proper operation especially in potentially life-threatening structures, such as helicopters, nuclear power plants, and uninterruptible power supply transitions in hospitals. The most common monitoring technique is casing mounted accelerometers to measure vibration. In contrast, during the last few years acoustic monitoring techniques have also provided a few diagnostic methods for gear failure. Current diagnostic methods to indicate improper gear behavior use either existing vibration data, recorded from defective gear systems, or modern dynamic models predicting gear failure behavior.

This thesis uses dynamic models to indicate, predict, and diagnose healthy and …

Performance-Based Analysis Of A Reinforced Concrete Shear Wall Building, Garrett Richard Hagen

Master's Theses

PERFORMANCE-BASED ANALYSIS OF A REINFORCED CONCRETE SHEAR WALL BUILDING

Garrett Richard Hagen

In this thesis, a special reinforced concrete shear wall building was designed per ASCE 7-05, and then the performance was investigated using the four analysis procedures outlined in ASCE 41-06. The proposed building was planned as a 6-story office building in San Francisco, CA. The structural system consisted of a two-way flat plate and reinforced concrete columns for gravity loads and slender structural walls for seismic loads. The mathematical building models utilized recommendations from ASCE 41-06 and first-principle mechanics. Moment-curvature analysis and fiber cross-section elements were used in …

Gpu-Accelerated Point-Based Color Bleeding, Ryan Daniel Schmitt

Master's Theses

Traditional global illumination lighting techniques like Radiosity and Monte Carlo sampling are computationally expensive. This has prompted the development of the Point-Based Color Bleeding (PBCB) algorithm by Pixar in order to approximate complex indirect illumination while meeting the demands of movie production; namely, reduced memory usage, surface shading independent run time, and faster renders than the aforementioned lighting techniques.

The PBCB algorithm works by discretizing a scene’s directly illuminated geometry into a point cloud (surfel) representation. When computing the indirect illumination at a point, the surfels are rasterized onto cube faces surrounding that point, and the constituent pixels are combined …

Suffix Trees For Document Retrieval, Ryan Reck

Master's Theses

This thesis presents a look at the suitability of Suffix Trees for full text indexing and retrieval. Typically suffix trees are built on a character level, where the tree records which characters follow each other character. By building suffix trees for documents based on words instead of characters, the resulting tree effectively indexes every word or sequence of words that occur in any of the documents. Ukkonnen's algorithm is adapted to build word-level suffix trees. But the primary focus is on developing Algorithms for searching the suffix tree for exact and approximate, or fuzzy, matches to arbitrary query strings. A …

Uniting The Nation's Power Grids: Opening Markets To Integrate Large Scale Renewable Power, Jeffrey Kenneth Wilkinson

Master's Theses

As renewable energy becomes increasingly cost competitive and Renewable Portfolio Standards (RPS) push states to produce more and more of their steadily growing power demands from renewable sources, the need to solve the problems associated with renewable penetration becomes a priority. The intermittent nature of solar and wind power generation require additional cost that inhibit their implementation as penetration levels grow. Reliability remains power utilities' top priority while they struggle to upgrade their systems. Old generation facilities will be decommissioned, renewable energy projects will come on line and transmission upgrades become inevitable. Variability on the grid is currently mitigated through …

The Future Of Red Hook, Brooklyn: Learning From Evolving New York City Neighborhoods, Robin Lynne Wachen

Master's Theses

This master’s thesis identifies the potential impacts of planning policies and key stakeholder groups on Red Hook, Brooklyn given current development trends and the neighborhood changes such as gentrification. The premise of this thesis is that through understanding the catalysts and impacts of social and economic change in similar neighborhoods, together with the analysis of current zoning, planning policies, and neighborhood culture and demographics in Red Hook, it is possible to identify how future changes may generate positive outcomes for the neighborhood. A review of planning literature provides a perspective on the disinvestment to reinvestment process seen in many New …

Teaching Introductory Programming Concepts: A Comparison Of Scratch And Arduino, Anne Beug

Master's Theses

Computing has become an integral part of modern America. The Bureau of Labor Statistics estimates that between 2008 and 2018, the United States will have 1.4 million job openings in computing fields [1]. Since the early 2000's (just after the "dot com bust"), the number of students enrolled in computing majors (Computer Science, Computer Engineering, etc.) dropped precipitously by over 50%, only starting to rise again in 2009 [2]. One way to rectify to this gap between demand and supply is to start training students in computational thinking during high school. While the Computer Science Advanced Placement AB test has …

Nitrocellulose Paper Based Microfluidic Platform Development And Surface Functionalization With Anti-Ige Aptamers, Jennifer Guerin Ward

Master's Theses

The purpose of this thesis project was to demonstrate the ability to utilize the capabilities of aptamers so that they may act as capture reagents for paper microfluidic devices. Several characterization experiments were conducted as a precursor before the final experimentation was performed. Paper characterization, manufacturing protocols for printing and heating, as well as 3D chip fabrication were all performed and analyzed. The results confirmed that the control of fluid through a 3D microfluidic device based in nitrocellulose is possible.

For the biochemistry portion of this thesis report, antibodies and aptamers were chosen to react with IgE, an antibody that …

Improvement Of Statistical Process Control At St. Jude Medical's Cardiac Manufacturing Facility, Christopher Lance Edwards

Master's Theses

Sig sigma is a methodology where companies strive to reproduce results ending up having a 99.9996% chance their product will be void of defects. In order for companies to reach six sigma, statistical process control (SPC) needs to be introduced. SPC has many different tools associated with it, control charts being one of them. Control charts play a vital role in managing how a process is behaving. Control charts allow users to identify special causes, or shifts, and can therefore change the process to keep producing good products, free of defects.

There are many factories and manufacturing facilities having implemented …

Coupled Surface Water-Groundwater Model To Analyze Sustainability Of The Atascadero Subbasin, Matthew Timothy Klinchuch

Master's Theses

The Atascadero Subbasin, located on the central coast of California, is a small, hydraulically separated sub-region of the Paso Robles Groundwater Basin. Three local cities operate approximately 40 wells to pump the Subbasin for their entire water supply needs. Past studies have questioned sustainability of the Subbasin as the combined pumping rate by the three cities is nearing the perennial yield of the Subbasin. The studies have been inconclusive as some areas of the Subbasin have seen increases in water table elevation thus questioning the assessment that consumption is nearing perennial yield. The objective of this research was to perform …

Cuda Web Api Remote Execution Of Cuda Kernels Using Web Services, Massimo J. Becker

Master's Theses

Massively parallel programming is an increasingly growing field with the recent introduction of general purpose GPU computing. Modern graphics processors from NVIDIA and AMD have massively parallel architectures that can be used for such applications as 3D rendering, financial analysis, physics simulations, and biomedical analysis. These massively parallel systems are exposed to programmers through in- terfaces such as NVIDIAs CUDA, OpenCL, and Microsofts C++ AMP. These frame- works expose functionality using primarily either C or C++. In order to use these massively parallel frameworks, programs being implemented must be run on machines equipped with massively parallel hardware. These requirements limit …

Cubesat Mission Planning Toolbox, Brian Castello

Master's Theses

We are in an era of massive spending cuts in educational institutions, aerospace companies and governmental entities. Educational institutions are pursuing more training for less money, aerospace companies are reducing the cost of gaining ight heritage and the government is cutting budgets and their response times. Organizations are accomplishing this improved efficiency by moving away from large-scale satellite projects and developing pico and nanosatellites following the CubeSat specifications. One of the major challenges of developing satellites to the standard CubeSat mission requirements is meeting the exceedingly tight power, data and communication constraints.

A MATLAB toolbox was created to assist the …

Spectral Shape Division Multiplexing (Ssdm): Apparatus, Transmitter, Receiver And Detection, Fausto Daniel Holguín-Sánchez

Master's Theses

Wireless communication companies require to use the frequency spectrum to operate. Both frequency licenses and infrastructure to reuse frequencies are costly resources subject to increasing demand. This work introduces a novel multiplexing method that saves spectrum called Spectral Shape Division Multiplexing (SSDM). Under certain configurations, SSDM displays higher flexibility and throughput than other spectrally efficient methods.

SSDM defines the structure of a wireless multi-carrier by software. It is similar to Orthogonal Frequency Division Multiplexing (OFDM) in that both use overlapped sub-carriers to make efficient use of allocated spectrum. However, SSDM has several advantages. Where OFDM organizes sub-carriers orthogonally, SSDM allows …

Flexrender: A Distributed Rendering Architecture For Ray Tracing Huge Scenes On Commodity Hardware., Robert Edward Somers

Master's Theses

As the quest for more realistic computer graphics marches steadily on, the demand for rich and detailed imagery is greater than ever. However, the current "sweet spot" in terms of price, power consumption, and performance is in commodity hardware. If we desire to render scenes with tens or hundreds of millions of polygons as cheaply as possible, we need a way of doing so that maximizes the use of the commodity hardware we already have at our disposal.

Techniques such as normal mapping and level of detail have attempted to address the problem by reducing the amount of geometry in …

Development Of A Quantitative High Throughput Method For The Early Detection Of Corrosion On Coated Aluminum, Jeffrey Clayton Foster

Master's Theses

Eight fluorescent indicators were evaluated for their ability to detect the corrosion of aluminum metal substrates. The fluorophore Rhodamine-salicylaldehyde (RSA) was selected as a candidate for further study based on its ability to bind and detect aluminum ions at low concentrations, its selectivity for aluminum ions, its long-term stability, its solubility in our solvent-based epoxy formulation, and its compatibility with our testing method.

A recent publication suggested that an alternative method of fluorescence activation was possible—an acid-promoted ring opening that occurred in the absence of metal ions. To prove the capability of RSA to bind aluminum ions, thorough ¹H …

Finite Element Modeling Of Ballistic Impact On A Glass Fiber Composite Armor, Dan M. Davis

Master's Theses

Finite Element Modeling of Ballistic Impact on a Glass Fiber Composite Armor

Dan Davis

Experiments measuring the ballistic performance of a commercially available fiberglass armor plate were used to guide the development of constitutive laws for a finite element model of the impact. The test samples are commercially available armor panels, made from E-glass fiber reinforced polyester rated to NIJ level III. Quasi-static tensile tests were used to establish material properties of the test panels. These properties were then used to create models in the explicit finite element code LSDYNA.

Ballistic impact testing of the panels was conducted using a …

The Characterization Of Biofilm Attachment To Metal Interfaces: Effects Of Substratum Properties, Marcel D. Mendes

Master's Theses

Bacteria are among the most abundant microorganisms on earth, and can be found in essentially every environment. When a clean surface is exposed to media containing planktonic bacteria, the bacterial cells will attach to the surface and aggregate to form what is known as a biofilm. Biofilms have been shown to negatively affect many industries including medical, industrial, and food science applications. While biofilms have been well characterized from a microbiology perspective, there has been much less research from a materials science standpoint. It is hypothesized that the material properties of the substratum (such as the micro-structure) have a significant …

Preparation And Characterization Of Electrospun Poly(D, L-Lactide-Co-Glycolide) Scaffolds For Vascular Tissue Engineering And The Advancement Of An In Vitro Blood Brain Barrier Model, Deven Chandrakant Patel

Master's Theses

Developing an in vitro Blood Brain Barrier model that will replicate the physiological, anatomical, and functional characteristics of the native BBB has gained significant attention. Such a model would enable prediction of the penetration of CNS targeting drug candidates across the BBB, allow pre-screening and optimization strategies to be developed for new drugs and gene delivery formulations, and permit research groups to further understand how a dysfunctional BBB is involved in the pathogenesis of several neurological diseases.

The Tissue Engineering laboratory at the California Polytechnic State University, San Luis Obispo is currently in the process of developing a dynamic in …

Modal Analysis Of Composite Structures With Damping Material, Kellie Michelle Tremaine

Master's Theses

The purpose of this study is to develop an analytical solution for modal analysis of actively damped orthotropic composite plates in bending and to verify it with experimental analysis.

The analytical modal analysis solution for composite plate dynamics is derived using Euler theory. This analysis applies to structures with orthotropic lamina of uniform material properties at any lamination angle. The bending-extensional coupling can be neglected for plates that are symmetric or approximately symmetric, which allows an exact solution for natural frequency and mode shape to be obtained. An exact solution can be found for natural vibration and in general.

The …

The Development Of Transparent, Processable, Thermally-Responsive Coatings, Christopher David Roland

Master's Theses

Polymer matrices are commonly used as guest-host systems for organic chromophores for use in non-linear optical materials. The chromophores must be aligned or poled in an electric field in order to impart anisotropy and non-linear activity to the material. This poling process raises several issues, the two largest being the eventual relaxation of the chromophores back into random orientations due to brownian motion, and high molecular weight polymer matrices limiting chromophore mobility during poling. The prevention of this relaxation process is an area of significant interest, especially in applications that require long term coating stability and activity. In this study, …

Flying Qualities Built-In-Test For Unmanned Aerial Systems, Alton Pak-Hin Chiu

Master's Theses

This paper presents a flying qualities built-in-test for UAS application with the scope limited to the longitudinal axis. A doublet input waveform excites the AV and both α and q are used by EUDKF to estimate the A and B matrices which are short period approximations of the system. ζ, ω, GM, PM, observability, and controllability are calculated to determine flying qualities with the results displayed to the AVO in a color-coded, easy to interpret display.

While SID algorithms have been flying in vehicles with adaptive control schemes, vehicles with other schemes (such as classical feedback) lack this built-in self …

Point-Spread Function Assessment Of Sg-Dbr Based Swept Source For Oct Imaging, David Wilkey Gilbert

Master's Theses

Swept Source Optical Coherence Tomography (SS-OCT) is a medical imaging technique that requires high repetition rate, widely-tunable coherent laser sources. Sampled grating distributed Bragg reflector (SG-DBR) lasers are proven in telecom applications and are expected to fulfill the requirements for SS-OCT at a significantly lower cost than alternative solutions.

Constructed entirely on a semiconductor substrate, SG-DBR lasers require four synchronized waveforms to modulate the output wavelength and intensity. Because of this unique tuning mechanism, there are a number of systematic and noise sources that can affect the quality of the OCT point-spread function (PSF). Based on these noise sources, software …

Effects Of Ovariectomy, Seasonal Changes, And Anatomical Position On The Compact Bone Remodeling As Seen In The Adult Ovine Model, Erica Wong

Master's Theses

The purpose of this study is to characterize the compact bone remodeling of the ovariectomized ewe and its effectiveness as an animal model for studies of postmenopausal osteoporosis. The use of animal models is a beneficial way to evaluate the effectiveness of medical devices and therapeutic agents for treating diseases. The ovine model is an attractive option because of its large size and similar bone remodeling to humans. However, this species, like most animals, does not undergo a natural menopause, making an ovariectomy necessary for studies of estrogen depletion. The OVX (ovariectomized) sheep has been widely accepted as a model …

Evaluation Of A Novel Axial Flux Variable Reluctance Machine, Derek Braden Hines

Master's Theses

The objective of this thesis is to determine the feasibility of a novel axial flux variable reluctance machine design. The design aims to compete with prevalent rare-earth permanent magnet machines while also implementing an innovative torque ripple minimization strategy. Given the fundamental operating principles, a selection of dimensions, materials, and excitations are prepared for the machine. Special attention is given to the rotor profile which is crucial to operation. Finite element analysis software is used to evaluate a three-dimensional model in terms of inductance and torque. The ultimate potential of the machine is discussed and recommendations for improvement are proposed.

Short Term Monitoring Of Suspender Cables On An In-Service Highway Bridge, Gannon Stromquist-Levoir

Master's Theses

No abstract provided.

Agent-Based Modeling Of Emergency Building Evacuation, Vi Q. Ha

Master's Theses

Panic during emergency building evacuation can cause crowd stampede, resulting in serious injuries and casualties. Agent-based methods have been successfully employed to investigate the collective human behavior during emergency evacuation in cases where the configurational space is extremely simple - usually one rectangular room - but not in evacuations of multi-room or multi-floor buildings. This implies that the effect of the complexity of building architecture on the collective behavior of the agents during evacuation has not been fully investigated. Here, we employ a system of self-moving particles whose motion is governed by the social-force model to investigate the effect of …

Synthesis Of S-Ribosyl-L-Homocysteine And Analogs Modified At The Homocysteine-C3 Position, Ruoyi Liu

Master's Theses

Quorum sensing (QS) is a process of bacterial cell-to-cell communication that conveys population density information in order to coordinate gene expression to produce synchronized behaviors. QS regulates the expression of virulence genes in many species of bacteria; hence, the manipulation of QS pathways may lead to treatment options against many bacterial diseases. The LuxS enzyme converts S-ribosyl-L-homocysteine (SRH) into homocysteine (HCys) and 4(S),5-dihydroxypentane-2,3-dione (DPD), which is the precursor of autoinducer-2 (AI-2). Thus, inhibitors of LuxS could prevent QS by halting the conversion of SRH to AI-2 rendering the cell “uncommunicative”. This work shows the successful chemical synthesis …

Computable Linear Orders And Turing Reductions, Whitney P. Turner

Master's Theses

This thesis explores computable linear orders through Turing Reductions and codes zero jump and zero double jump into linear orders using discrete, dense, and block linear relations.

Development And Application Of A Portable System To Reliably Measure Grip Forces Using Thin-Film Force Sensors, Shane Vincent Tornifoglio

Master's Theses

Accurate tracking of hand grip force is an important consideration needed for a robust understanding in the study of human biomechanics. One aspect where it proves useful is in hand-arm vibration, such as from gripping a power tool. Depending on how firmly the user is gripping the tool, they may change their exposure levels to the tool vibration, which can lead to potential disorders such as Hand-Arm Vibration Syndrome (HAVS).

A small, battery powered portable force unit has been developed to supply power to, and condition, the signals from eight thin-film force sensors. This gives a better understanding of the …

Eurotech Students In Germany: Preparation, Experience And Outcome, Daisy A. Michaels

Master's Theses

Higher education study abroad programs for U.S. students are on the rise. A variety of undergraduate disciplines are being coupled with international components to bring U.S. students to a higher level of global awareness to meet the demands of today’s economy. The University of Connecticut’s Eurotech Program is an example of this trend. Its students earn degrees in both German and engineering in a five year program. They are given practical training through study and internships in Germany under the auspices of the Baden-Württemberg Exchange Program. One of the Eurotech Program’s major goals is to enhance job opportunities for its …