Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Journal of Electrochemistry

Discipline
Keyword
Publication Year

Articles 1501 - 1530 of 2393

Full-Text Articles in Entire DC Network

Electrochemical Characterization Of Positive Electrode Material Lini1/3Co1/3Mn1/3O2 In Different Electrolytes, Jing-Jing Liu, Wei-Hua Qiu, Ling-Yan Yu, Hai-Lei Zhao, Tao Li Nov 2006

Electrochemical Characterization Of Positive Electrode Material Lini1/3Co1/3Mn1/3O2 In Different Electrolytes, Jing-Jing Liu, Wei-Hua Qiu, Ling-Yan Yu, Hai-Lei Zhao, Tao Li

Journal of Electrochemistry

Cathode materials LiNi1/3Co1/3Mn1/3O2 were prepared by low-heating solid-state reaction.The micro-structure and morphology of as-synthesized materials have been investigated by using XRD and SEM. The compatibilities of LiNi1/3Co1/3Mn1/3O2 with purchased LiPF6/ EC+DMC+DEC electrolyte and prepared LiBOB/EC+DEC+EMC electrolyte have also been studied. The Li/LiNi1/3Co1/3Mn1/3O2 batteries showed excellent electrochemical properties in the LiPF6/EC+DMC+DEC electrolyte. Reversible discharge capacities of 167, 163, 163, 157, 147mAh/g at 0.5C, 1C, 1.5C, 2C, 3C rate between 2.7~4.35 V, with stable cycling performances have …

Go to article

Column Thin-Layer Electrolytic Self-Regenerating Suppressor For Ion Chromatography, Wei-Xiong Huang, Rong-Zong Hu, Shu-Chao Wu, Dan-Mei Pan Nov 2006

Column Thin-Layer Electrolytic Self-Regenerating Suppressor For Ion Chromatography, Wei-Xiong Huang, Rong-Zong Hu, Shu-Chao Wu, Dan-Mei Pan

Journal of Electrochemistry

A new type of column thin-layer electrolytic selfregenerating suppressor for ion chromatography was proposed.A porous electrode was used in this suppressor,incorporating the electrode and the electrolyte compartment,and eliminating the voltage across the electrolyte compartment.The design of the column thin-layer configuration of suppression compartment simplified the structure of suppressor and reduced the dead volume,improving the performance of suppressor.

Go to article

Electrochemical Behavior Of Buprofezin On Glass-Carbon Electrode, Qi Wang, Chang-Guo Chen Nov 2006

Electrochemical Behavior Of Buprofezin On Glass-Carbon Electrode, Qi Wang, Chang-Guo Chen

Journal of Electrochemistry

Electrochemical behavior of Bup has been investigated by means of cyclic voltammetry,linear sweep voltammetry,differential pulse voltammetry and square wave voltammetry.The results indicate that the electrochemical behavior of Bup on the surface of glassy carbon electrode is corresponding to a irreversible two-protons and two-electrons process with absrption.The square wave voltammetry for determination of Bup in actual samples has been established.

Go to article

Fabrication And Characterization Of Gadolinium Hexacyanoferrate Modified Electrode, Yan-Mao Shi, Pan Du, Ping Wu, Yao-Ming Zhou, Chen-Xin Cai Nov 2006

Fabrication And Characterization Of Gadolinium Hexacyanoferrate Modified Electrode, Yan-Mao Shi, Pan Du, Ping Wu, Yao-Ming Zhou, Chen-Xin Cai

Journal of Electrochemistry

A new electroactive polynuclear inorganic compound of rare earth metal hexacyanoferrate,gadolinium hexacyanoferrate(GdCHF),was prepared by electrochemically deposition on the surface of a glassy carbon electrode with a potential cycling procedure.The result of SEM indicated that the GdHCF was in the form of particles adhered on the surface of electrode.There were two different shapes and sizes of GdHCF forming on the surface of electrode.FTIR spectrum of GdHCF showed a very strong and sharp peak,which located at 2062.5 cm-1 and corresponded to the stretching vibration of the C≡N group in the GdHCF.The cyclic voltammetric results indicated that the GdHCF/GC electrode exhibited two …

Go to article

Synthesis Of Monolithic Carbon/Nickel Oxide Composite Electrode Material And Cyclic Voltammetry Characteristics, Tian-Ying Guo, Jing-Wei Zhu, Mou-Dao Song, Bang-Hua Zhang Nov 2006

Synthesis Of Monolithic Carbon/Nickel Oxide Composite Electrode Material And Cyclic Voltammetry Characteristics, Tian-Ying Guo, Jing-Wei Zhu, Mou-Dao Song, Bang-Hua Zhang

Journal of Electrochemistry

Monolithic carbon/nickel oxide composite materials were synthesized by carbonization of phenol formaldehyde gels that were ion-exchanged with Ni2+.Atomic absorption spectroscopy and powder X-ray diffraction technique were used to characterize the chemical composition and physical structure of the materials.The nickel dope amount for this method can reach 5.9 %(by mass).Subsequent cyclic voltammetry experiments indicate that the materials exhibit best capacitive performance at the nickel content of 4.4 %.

Go to article

Fabrication Of Gold Electrode Array Based On Co2 Laser Ablation, Wei Zhang, Jiang-Qun Xiao, Yong-Liang Zhou Nov 2006

Fabrication Of Gold Electrode Array Based On Co2 Laser Ablation, Wei Zhang, Jiang-Qun Xiao, Yong-Liang Zhou

Journal of Electrochemistry

A rapid process is described to produce single or multiple electrodes of any shape based on CO2 laser ablation for microfluidic chip.The method is as follow: coating a kind of material as sacrifice layer on a piece of glass with sputtered Cr and Au;designing the needed pattern on a computer;selecting proper parameters and ablating with CO2 laser;wiping of Au/Cr and sacrifice layer,and obtain electrodes at last.The microfluidic chip was gotten by reversely bonding with a piece of PDMS,and sealing around with PDMS prepolymer.The mask' effect is the main factor that influencing electrode quality.The width of electrodes could be …

Go to article

Preparation And Electrochemical Characterization Of Anatase Tio2 Nanotubes, Bin Cao, Jin-Wei Xu, Ling-Hong Ding, Wei-Feng Zhang Nov 2006

Preparation And Electrochemical Characterization Of Anatase Tio2 Nanotubes, Bin Cao, Jin-Wei Xu, Ling-Hong Ding, Wei-Feng Zhang

Journal of Electrochemistry

Titanium oxide nanotubes were prepared by hydrothermal treatment of anatase-type TiO2 powders and NaOH solution in an autoclave.Transmission Electron Microscopy and X-ray Diffraction showed that the product is anatase-type TiO2 nanotubes.The constant charge-discharge current and cyclic voltammetry exhibited the TiO2 nanotubes have a large initial lithium insertion capacity of 260 mA·h/g and good reversibility.This study indicates that TiO2 nanotubes might be a good negative electrode materical for second lithium battery in the future.

Go to article

Electrochemical Behavior Of Tanshinoneⅱa And Its Determination, Guang-Wen Li, Xin-Hua Lin, Xiao-Yan Lin Nov 2006

Electrochemical Behavior Of Tanshinoneⅱa And Its Determination, Guang-Wen Li, Xin-Hua Lin, Xiao-Yan Lin

Journal of Electrochemistry

The electrochemical behavior of TanshinoneⅡA was investigated by voltammetry at a glassy carbon electrode.And Differential Pulse Voltammetric method for determination of TanshinoneⅡA was developed.In pH 4.0 acetate buffer solution,the relationship between oxidation peak current of Differential Pulse Voltammetric and the concentration of Tanshinone ⅡA was linear in the range of 3.0×10-7～2.0×10–5 mol·L-1.The detection limit had been estimated as 2.0×10-8 mol·L-1.The interference of other components in the preparation could be efficiently eliminated by the glassy carbon electrode.This method can be used for the determination of TanshinoneⅡA in real sample with satisfactory results.

Go to article

Novel Electrochemical Method For Synthesis Of Nanostructured Materials Of Noble Metals Based On Poly(N-Vinylpyrrolidone) (Pvp), Wei Pan, Xiao-Kai Zhang, Ming-Hu Huang, Shao-Xin Huang, Xing-Li Feng, Hou-Yi Ma Nov 2006

Novel Electrochemical Method For Synthesis Of Nanostructured Materials Of Noble Metals Based On Poly(N-Vinylpyrrolidone) (Pvp), Wei Pan, Xiao-Kai Zhang, Ming-Hu Huang, Shao-Xin Huang, Xing-Li Feng, Hou-Yi Ma

Journal of Electrochemistry

Gold nanocrystals with controllable size were synthesized through a simple electroreduction method using poly(N-vinylpyrrolidone)(PVP) of different polymerization degree as both stabilizer and shape-controller for gold nanoclusters.Individual gold nanoparticles spontaneously assembled into the wire-and ring-shaped nanoparticle aggregates depending on the PVP's dynamic stretching and curling,and precursor nanoparticles grew into flat,single-crystalline nanoprisms with thickness of dozens of nanometers based on the oriented aggregation between particles.Besides,core-shell Au/Ag nanoparticles were conveniently synthesized through two-step electroreduction of noble metal ions in the presence of PVPK30.The electrochemical synthetic method based on PVP provides a new path for preparation of noble metal nanostructured materials with different shape …

Go to article

Phase-Transfer Technique For Polymer-Protected Noble Metal Nanoparticles, Xing-Li Feng, Ming-Hui Huang, Xiao-Kai Zhang, Shao-Xin Huang, Wei Pan, Hou-Yi Ma Nov 2006

Phase-Transfer Technique For Polymer-Protected Noble Metal Nanoparticles, Xing-Li Feng, Ming-Hui Huang, Xiao-Kai Zhang, Shao-Xin Huang, Wei Pan, Hou-Yi Ma

Journal of Electrochemistry

A novel phase-transfer method was developed based on the decrease of PVP's solubility in water with increasing temperature,by means of which PVP-protected gold,silver and platinum nanoparticles can be conveniently transferred from aqueous phase to 1-butanol phase.Monodispersed metal nanoparticles were electrochemically synthesized at first in the aqueous,and then 1-butanol of appropriate volume was added to the aqueous phase.Heating the oil-water mixture to 80 ℃ under vigorous stirring would make metal nanoparticles leave the aqueous phase and enter into the 1-butanol phase,with high phasetransfer efficiency and without aggregation between nanoparticles.An electrochemical method to synthesize metal nanoparticles in the oil-water mixtures was further …

Go to article

Study Of The Electrooxidation Of Glycerol On Oxide And Pd/C Composite Catalysts, Zhi-Yuan Yan, Chang-Wei Xu, Pei-Kang Shen Nov 2006

Study Of The Electrooxidation Of Glycerol On Oxide And Pd/C Composite Catalysts, Zhi-Yuan Yan, Chang-Wei Xu, Pei-Kang Shen

Journal of Electrochemistry

Oxide and Pd on carbon composite catalysts have been prepared by intermittent microwave heating(IMH) method.The performance of the catalysts for glycerol oxidation in alkaline solution is studied by electrochemical techniques.It is shown that the Pd/C catalyst is active for glycerol electrooxidation.However,the oxide-Pd/C catalysts are even better in terms of the onset potential that is more negative and peak current density.The ratio of oxide to Pd is optimized according to the electrochemical measurement.The results reveal that the addition of oxide into the Pd/C induces the synergistic effect for glycerol electrooxidation.

Go to article

Deep Treatment Of Pulping Wastewater Using Three Phase Fluidized Bed Electrode Reactor, Dan Wu, Qi-Cai Shi, Ji-Ti Zhou, Bao-Jun Jia Nov 2006

Deep Treatment Of Pulping Wastewater Using Three Phase Fluidized Bed Electrode Reactor, Dan Wu, Qi-Cai Shi, Ji-Ti Zhou, Bao-Jun Jia

Journal of Electrochemistry

Treatment of pulping wastewater by using a novel electrochemical reactor,i.e.the three phase fluidized bed electrode,reactor were invesigated.The effects of air flow rate,applied voltage,pH value and FeSO4 concentration on electrolysis efficiency were investigated.It was clearly shown that the 20 V of voltage,0.3 m3·h-1 of air flow rate,1000 mg L-1 of FeSO4 concentration and pH≈2.5 were its best conditions.COD removal could be 70.1% under these conditions.

Go to article

Electrochemical Properties Of The Modified Carbon Nanotubes, Chun-An Ma Nov 2006

Electrochemical Properties Of The Modified Carbon Nanotubes, Chun-An Ma

Journal of Electrochemistry

Powder micro-electrodes were prepared from raw carbon nanotubes and carbon nanotubes modified by carboxyl.The electro-reduction properties of both the raw and open-ended carbon nanotubes in p-Nitrophenol solution were investigated.The FTIR spectrum result indicated that the functional groups are successfully fixed on the surface of the carbon nanotubes after nitric acid treatment.The cyclic voltammetry results show that the electrochemical activity of carboxyl-modified carbon nanotubes was improved.The mechanism of electro-(reduction) for the carbon nanotubes after acid treatment was discussed.

Go to article

Studies And Applications Of Phosphoric Acid Treatment On Low Voltage Formed Aluminum Foils, Lan Sun, Hui-Rong Qiu, Hui-Zhong Tan, Xue-Yan Chen, Chang-Jian Lin Nov 2006

Studies And Applications Of Phosphoric Acid Treatment On Low Voltage Formed Aluminum Foils, Lan Sun, Hui-Rong Qiu, Hui-Zhong Tan, Xue-Yan Chen, Chang-Jian Lin

Journal of Electrochemistry

The surface of low voltage formed foil for Al electrolysis capacitors is treated with phosphoric acid solution.The effects of concentration of phosphoric acid solution,temperature and process time on specific capacitance and the time of hydration resistance with standing voltage are studied.The optimum condition is presented.The properties of low voltage formed foil have been improved by applying this method on the product line.

Go to article

Stm Tip-Induced Nanostructuring-Replacement Method To Construct Pt Surface Nanostructures, Jin-Gang Wang, Jing Tang, Zhao-Bin Chen, Bing-Wei Mao Nov 2006

Stm Tip-Induced Nanostructuring-Replacement Method To Construct Pt Surface Nanostructures, Jin-Gang Wang, Jing Tang, Zhao-Bin Chen, Bing-Wei Mao

Journal of Electrochemistry

STM tip-induced surface nanostructuring based on "Jump-to-contact" mechanism is a nanostructuring technique that has the highest resolution in aqueous solutions.However,for metals that have high cohesive energy,atoms would transfer from surface to tip instead,which limits the wide application of this technique.In this paper,we present a two-step Nanostructuring-Replacement method to construct metal nanoclusters that cannot be obtained directly via the "Jump-to-contact" mechanism.The method is demonstrated to construct Pt nanoclusters that are of great interest in catalysis and electrocatalysis but cannot be constructed via the "Jump-to-contact" mechanism.Since Cu is the most intensively studied and successful system in the tip-induced nanostructuring,it is utilized as …

Go to article

Reaction Mechanism Of V(Ⅳ)/V(Ⅴ) Redox Couple At Graphite Felt Composite Electrode Bonded With Conductive Carbon Plastic, Xiao-Gang Li, Ke-Long Huang, Su-Qin Liu, Ning Tan, Li-Quan Chen Nov 2006

Reaction Mechanism Of V(Ⅳ)/V(Ⅴ) Redox Couple At Graphite Felt Composite Electrode Bonded With Conductive Carbon Plastic, Xiao-Gang Li, Ke-Long Huang, Su-Qin Liu, Ning Tan, Li-Quan Chen

Journal of Electrochemistry

The rate-determining step of V(Ⅳ) /V(Ⅴ) redoxreaction was investigated at graphite felt(GF)composite electrode by various techniques: cyclic voltammetry,polarization curve and impedance spectroscopy.Cyclic voltammetry analysis indicated that V(Ⅳ) /V(Ⅴ) redox reaction at GF electrode is quasi reversible.Acertain chemical reaction step is suspected to follow the electron transfer step of this reaction.The Tafel slopevalue(0.124) obtained from the polarization curve agrees well with theoretical value(0.12),which supposingthe electron transfer step was the rate-determining step.Impedance Spectroscopies at various potentials werestudied and simulated by equivalentcircuits.The impedance value of the electron transfer step modified is greatlyhigher than the others,which shows that the electron transfer step is the …

Go to article

The Synthesis, Structure And Electrochemical Performances Of Lithium Iron Phosphate, Hui Xie, Zhen-Tao Zhou Nov 2006

The Synthesis, Structure And Electrochemical Performances Of Lithium Iron Phosphate, Hui Xie, Zhen-Tao Zhou

Journal of Electrochemistry

The lithium iron phosphate cathode materials were synthesized by solid-state reaction combined high-rate ball milling under the temperature ranging from 400 ℃ to 700 ℃.The crystalline structure, morphology of particles, and electrochemical performance of the sample were investigated by X-ray diffraction, scanning electron microscopy and charge-discharge test. The results showed that the sintering temperature had great influences on the crystal structure, morphology and electrochemical performances of LiFePO4. The sample synthesized under 600℃ showed the best charge-discharge performances with the first specific discharge capacity of(128.8) mAh/g and the 15th specific discharge capacity of 129.1 mAh/g at 0.1C rate, …

Go to article

Structure And Electrochemical Characteristics Of Lifepo4 Prepared By The Polyacrylates-Pyrolysis-Reduction Method For Li-Ion Batteries, Li-Hong Yu, Yu-Liang Cao, Xiao-Fei Zhang, Han-Xi Yang, Xin-Ping Ai Nov 2006

Structure And Electrochemical Characteristics Of Lifepo4 Prepared By The Polyacrylates-Pyrolysis-Reduction Method For Li-Ion Batteries, Li-Hong Yu, Yu-Liang Cao, Xiao-Fei Zhang, Han-Xi Yang, Xin-Ping Ai

Journal of Electrochemistry

The cathode material of olivine LiFePO4 was prepared by a novel method of polyacrylate-pyrolysis-reduction.XRD demonstrates that the material have the olivine structure.SEM photo shows an average particle-size of about 100 nm with a well distribution.Electrochemical test of cycling at a constant current reveals the discharge capacity of 138 mAh/g and a good cycling stability.It is a novel practicable technology to prepare LiFePO4 by using polyacrylate-pyrolysis-reduction method.

Go to article

Research Of Explosion Mechanism Of Lithium-Ion Battery, Yu-Hong Chen, Zhi-Yuan Tang, Yan-Bing He, Qiang Liu Aug 2006

Research Of Explosion Mechanism Of Lithium-Ion Battery, Yu-Hong Chen, Zhi-Yuan Tang, Yan-Bing He, Qiang Liu

Journal of Electrochemistry

The heat character of Lithium-ion battery materials and explosion mechanism of Lithium-ion cells under the overcharge,short-circuit and other abuse behavior are tested by C80 calorimeter, DSC and charge-discharge instrument.SEI reactions, LixC6/electrolyte and LixC6/PVDF reactions take place at the anodes. Electrolyte and solvent reactions happen after 178℃ and Li1-xCo1/3Ni1/3Mn1/3O2 decomposes after 230℃. The batteries explode at 150℃ oven test or 1.5C, 5.5 V overcharge and do not explode at short-circuit.

Go to article

Studies On Performance And Electrode Materials For All Vanadium Flow Battery, Jun Yuan, Qing-Chun Yu, Yi-Feng Liu, Liang-Liang Ma, Yi-Hua Wu Aug 2006

Studies On Performance And Electrode Materials For All Vanadium Flow Battery, Jun Yuan, Qing-Chun Yu, Yi-Feng Liu, Liang-Liang Ma, Yi-Hua Wu

Journal of Electrochemistry

In this paper,cyclic voltammetry has been used to study the electrochemical performance of the treated and untreated graphite,soft graphite and PAN-carbon cloth in vanadium sulfate solution.The results show that: the reversibility of reaction can be improved on the surface of treated electrode,and the current can also increase;the electrochemical performance of treated electrode is remarkably enhanced;in the process of charge/discharge,the charge current can reach up to 20 mA/cm2,and discharge current up to 15 mA/cm2;surface morphology of the treated and untreated graphite show that the treatment can change the surface structure of electrode and also add the reaction …

Go to article

Immobilization Of Cytochrome C On The Surface Of Single-Wall Carbon Nanotube And Its Direct Electron Transfer And Electrocatalysis, Ya-Jing Yin, Ya-Fen Lv, Ping Wu, Pan Du, Yan-Mao Shi, Chen-Xin Cai Aug 2006

Immobilization Of Cytochrome C On The Surface Of Single-Wall Carbon Nanotube And Its Direct Electron Transfer And Electrocatalysis, Ya-Jing Yin, Ya-Fen Lv, Ping Wu, Pan Du, Yan-Mao Shi, Chen-Xin Cai

Journal of Electrochemistry

Cytochrome c(Cyto c) was immobilized on the surface of the single-wall carbon nanotube(SWNT) by using the method of adsorption.Infrared spectroscopy indicated that the Cyto c remained in its original structure and did not undergo structural change after its immobilization on the SWNT.The direct electrochemistry of cyto c,which was adsorbed on the surface of the SWNT,was studied by cyclic voltammetry.The voltammetric results demonstrated that the SWNT had promoting effects on the direct electron transfer of Cyto c and also indicated that the immobilized Cyto c retained its bioelectrocatalytic activity to the reduction of H2O2.This modified electrode might …

Go to article

Investigation Of The Direct Electrochemical Reduction Of Cr2O3 Powder In Molten Cacl2 By A Metallic Cavity Electrode, Guo-Hong Qiu, Di-Hua Wang, Xian-Bo Jin, Xiao-Hong Hu, Zheng Chen Aug 2006

Investigation Of The Direct Electrochemical Reduction Of Cr2O3 Powder In Molten Cacl2 By A Metallic Cavity Electrode, Guo-Hong Qiu, Di-Hua Wang, Xian-Bo Jin, Xiao-Hong Hu, Zheng Chen

Journal of Electrochemistry

A metallic cavity electrode is used for further investigation of the electrochemical behaviour of Cr2O3 powder in molten CaCl2(Na: ~0.02% by mass,Mg: < 0.005% by mass) at 900 ℃.The Cr2O3 powder reduction mechanism was confirmed in line with EDX and SEM analysis of the potentiostatic electrolysis products.The correlations between the particle size of metallised product and the electrolysis potential,or electrolysis time were analysed.

Go to article

Studies On Synthesis And Electrochemical Performance Of LiXNi1/3Mn1/3Co1/3O2 As Cathode Material For Lithium Ion Batteries, Xiao-Jian Guo, Jie Li, Yi-Xiao Li, Yong Yang Aug 2006

Studies On Synthesis And Electrochemical Performance Of LiXNi1/3Mn1/3Co1/3O2 As Cathode Material For Lithium Ion Batteries, Xiao-Jian Guo, Jie Li, Yi-Xiao Li, Yong Yang

Journal of Electrochemistry

A series of LiNi1/3Mn1/3Co1/3O2 were synthesized by a combined hydroxides coprecipitation and calcination method.Effects of synthesizing temperature of coprecipitations and the Li∶M ratios on structure and electrochemical performance of the materials were studied.The results showed that materials synthesized with coprecipitation at room temperature(~20 ~(o)C) delivered the best electrochemical performance.Another series of cathode materials LiXNi1/3Mn1/3Co1/3O2 with different Li∶M ratios were synthesized with this method.The results showed that sintering at high temperature could cause loss of LiOH,thus more LiOH should be added.It is demonstrated that Li …

Go to article

Effects On The Structure And Electrochemical Performance Of Lifepo4 By Zr4+ Doping, Yan-Li Ruan, Zhi-Yuan Tang Aug 2006

Effects On The Structure And Electrochemical Performance Of Lifepo4 By Zr4+ Doping, Yan-Li Ruan, Zhi-Yuan Tang

Journal of Electrochemistry

Stoichiometric Zr-doped lithium iron phosphate(LiFePO4)) cathode material was synthesized by a solid-state reaction in an inert atmosphere. The effects of doping content on the physical and electrochemical properties of as-synthesized cathode materials were investigated.The samples were characterized by powder X-ray diffraction(XRD), and their electrochemical performance was systematically measured by impedance response and constant current charge/discharge cycling tests. The results indicate that the low concentration Zr4+ doping does not affect the structure of the material but considerably improves its kinetics in terms of capacity delivery and cycle performance. At 0.1C discharging rate,the reversible specific capacities of the Li …

Go to article

Pre-Oxidative Amperometric Glucose Biosensor Incorporated With Carbon Nanotube And Pbo2, Hong-Lan Qi, Cheng-Xiao Zhang Aug 2006

Pre-Oxidative Amperometric Glucose Biosensor Incorporated With Carbon Nanotube And Pbo2, Hong-Lan Qi, Cheng-Xiao Zhang

Journal of Electrochemistry

A pre-oxidative amperometric glucose biosensor incorporated with carbon nanotube,ferrocenemonocarboxylic acid and PbO2 was designed.The interferences coming from reduced substances,such as ascoribic acid and urine acid were eliminated by PbO2.The oxidative current is linear at the potential of +0.40 V(vs.SCE) to the concentration of glucose in the range from 0.50 to 20 mmol·L-1,and the detection limit of glucose is 0.1 mol L-1.The relative standard deviation is 3.3% for seven successive assays at 5.0 mmol·L-1glucose.This biosensors have been applied to determination of the glucose in serum with satisfying results.

Go to article

The Electrochemical Study On Self-Assembled Monolayers Of Sodium Stearate Surfactant On Oil/Water Interface, Li-Na Tang, Feng-Ping Wang, Yong-Chun Zhu Aug 2006

The Electrochemical Study On Self-Assembled Monolayers Of Sodium Stearate Surfactant On Oil/Water Interface, Li-Na Tang, Feng-Ping Wang, Yong-Chun Zhu

Journal of Electrochemistry

The self-assembled monolayers of sodium stearate surfactant on oil/water interface was investigated by CV with copper ion as probe.The self-assembling process includes four stages,and forms a stable assembly.The electrochemical oxidation of copper ion at assembled surface is a combine controlled process both surface and diffusion with regression equation as ip = 9.214-3.889 v1/2 +0.5809v,r=0.9978,compared with the oil covered bared electrode,it is a complete surface controlled.

Go to article

Investigations On Electrochemical Characteristics Of Liv3O8 Electrode In Lithium Sulfate-Water-Ethanol Electrolytes, An-Bao Yuan, Wei-Xiang Song Aug 2006

Investigations On Electrochemical Characteristics Of Liv3O8 Electrode In Lithium Sulfate-Water-Ethanol Electrolytes, An-Bao Yuan, Wei-Xiang Song

Journal of Electrochemistry

The active material of LiV3O8 prepared using low-temperature pre-reaction in solution followed by intermediate-temperature calcination at 450 ℃.The product was characterized by X-ray diffraction analysis and scanning electron microscope observation.The performance of LiV3O8  electrode in neutral lithium sulfate-water-ethanol electrolytes was investigated using electrochemical methods.Galvanostatic charge/discharge results indicated that the specific capacity of LiV3O8  electrode decreases with ethanol content increasing in electrolyte.The most appropriate water/ethanol volumetric ratio is 4 ∶1 in terms of conductivity of the electrolyte and stability of the electrode.AC impedance measurements demonstrated that the ohmic resistance of the electrolyte …

Go to article

The Influence Of Pva As Disperser On Lifepo4 Synthesized By Hydrothermal Reaction, Hui-Lin Li, Hui Zhan, Yu-Hong Zhou Aug 2006

The Influence Of Pva As Disperser On Lifepo4 Synthesized By Hydrothermal Reaction, Hui-Lin Li, Hui Zhan, Yu-Hong Zhou

Journal of Electrochemistry

LiFePO4 was synthesized by means of hydrothermal reaction,in which PVA acts as disperser and glucose as carbon source. The samples were characterized by X-ray diffraction, scanning electron microscopy and electrochemical measurement. SEM results show that the sample is homogeneously composed of grains with a particle size of ca.200nm. In the charge/discharge test, the products exhibited a 3.45V discharge voltage plateau and a maximum specific capacity of 140mAh/g. After 40 cycles, its capacity only declined by 2.1%. Besides these, the mechanism for the influence of the particle size and carbon coating on the electrochemical property of LiFePO4 material was …

Go to article

Calcined Temperatures Influence On Synthesis And Electrochemistry Charactarization Of Li[Ni0.475Mn0.475Co0.05]O2 For Li-Ion Batteries, Li-Qin Wang, Li-Fang Jiao, Hua-Tang Yuan, Yong-Mei Wang Aug 2006

Calcined Temperatures Influence On Synthesis And Electrochemistry Charactarization Of Li[Ni0.475Mn0.475Co0.05]O2 For Li-Ion Batteries, Li-Qin Wang, Li-Fang Jiao, Hua-Tang Yuan, Yong-Mei Wang

Journal of Electrochemistry

Layered Li[Ni0.475Mn0.475Co0.05]O2 materials have been prepared by a solid-state pyrolysis method.Experiments of XRD,SEM,cyclic voltammetry and charge/discharge cycling were carried out.It can be learned that when calclined at 800 ℃,the sample showed the highest first discharge capacity of 178.8 mAh·g-1 at a current density of 20 mA/g in the voltage range 2.3~4.6 V

Go to article

Study On The Microstructure Of Pb-Sn Alloy Obtained From Quasi-Two-Dimensional Electrodeposition, Bin Sun Aug 2006

Study On The Microstructure Of Pb-Sn Alloy Obtained From Quasi-Two-Dimensional Electrodeposition, Bin Sun

Journal of Electrochemistry

A two-layered structure of eutectic-solid sulotion is formed in the microstructure of Pb-Sn alloy obtained from quasi-two-dimensional electrodeposition.It is showed that this unique structure is caused by the variation of the current density on the growth interface.When the interface is located in the front of the whole deposits,the current density is high.So the Pb and Sn can deposit together and the eutectic texture forms.When the interface is in the rear of the whole deposits,the current density is low.At this moment the electrodeposition of Pb is the dominant reaction,and the Pb-based solid solution appears.

Go to article

First Prev Next Last